Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
14 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE (AF) Halwara
GE (AF) Halwara
REPAIR/MAINT OF GANTRIES IN SIDE WSA BLDGS AND REPAIR/MAINT OF HANGER DOORS, HYDRAULIC JACK AND MISC OTHER EQPTS INSTALLED AT AF STN HALWARA
2026_MES_799763_1
GE/Hal-68/2026-27
Open Tender
Civil Works
Item Rate
334 days
Halwara
As per cover 1
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Halwara
₹90,000
Yes
21 Nov 2026
21 Nov 2026
16 Dec 2026
21 Nov 2026
14 Dec 2026
7 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Maintenance/serviceing of EOT 10 Ton (electrically operated cranes) by the following method:-
(i) Replacement of gear oil in gear boxes.
(ii) Grease the whole crane.
(iii) Before ferilling the gear boxes clean the gear box for inside and outside by using deisel.
(iv) Checking the wheel condition.
(v) If thruster breaks are used check the level of oil in it. If required to be refilled, refilled the same.
(vi) Check the working of the break if required to change, then change the same.
(vii) Checking the connections of motors.
(viii) Check the condition of motors if required to be rewind, rewind the same.
(ix) Checking the condition of couplings. If required to be change, change the same.
(x) Check the nuts & bolts fitted on the crane. If required to be then change the same.
(xi) Check the wire rope of the crane. If required to be replaced, replaced the same.
(xii) Check the condition of power cables fitted on the crane. If required to be change, change the same.
(xiii) Check the break shoe fitted on the break of the crane, If required to be replaced, replaced the same.
(xiv) Check the limit switch fitted on the crane, if found unsv replaced the same.
(xv) Check step down transformer, single phase preventer, thermal block, MCB, HRC and DBR, if found unsv repalced the same.
(xvi) If VFD installed check the same, if found unsv replaced the same and check all the motions of VFD.
(xvii) Check the pendent, if element and push buttons found unsv replaced the same complete all as specified and directed by Engr-in-Charge. | 5 | Each Job | - | - |
| 2 | Maintenance/serviceing of EOT 08 Ton (electrically operated cranes) by the following method:-
(i) Replacement of gear oil in gear boxes.
(ii) Grease the whole crane.
(iii) Before ferilling the gear boxes clean the gear box for inside and outside by using deisel.
(iv) Checking the wheel condition.
(v) If thruster breaks are used check the level of oil in it. If required to be refilled, refilled the same.
(vi) Check the working of the break if required to change, then change the same.
(vii) Checking the connections of motors.
(viii) Check the condition of motors if required to be rewind, rewind the same.
(ix) Checking the condition of couplings. If required to be change, change the same.
(x) Check the nuts & bolts fitted on the crane. If required to be then change the same.
(xi) Check the wire rope of the crane. If required to be replaced, replaced the same.
(xii) Check the condition of power cables fitted on the crane. If required to be change, change the same.
(xiii) Check the break shoe fitted on the break of the crane, If required to be replaced, replaced the same.
(xiv) Check the limit switch fitted on the crane, if found unsv replaced the same.
(xv) Check step down transformer, single phase preventer, thermal block, MCB, HRC and DBR, if found unsv repalced the same.
(xvi) If VFD installed check the same, if found unsv replaced the same and check all the motions of VFD.
(xvii) Check the pendent, if element and push buttons found unsv replaced the same complete all as specified and directed by Engr-in-Charge. | 1 | Each Job | - | - |
| 3 | Maintenance/serviceing of EOT 05 Ton (electrically operated cranes) by the following method:-
(i) Replacement of gear oil in gear boxes.
(ii) Grease the whole crane.
(iii) Before ferilling the gear boxes clean the gear box for inside and outside by using deisel.
(iv) Checking the wheel condition.
(v) If thruster breaks are used check the level of oil in it. If required to be refilled, refilled the same.
(vi) Check the working of the break if required to change, then change the same.
(vii) Checking the connections of motors.
(viii) Check the condition of motors if required to be rewind, rewind the same.
(ix) Checking the condition of couplings. If required to be change, change the same.
(x) Check the nuts & bolts fitted on the crane. If required to be then change the same.
(xi) Check the wire rope of the crane. If required to be replaced, replaced the same.
(xii) Check the condition of power cables fitted on the crane. If required to be change, change the same.
(xiii) Check the break shoe fitted on the break of the crane, If required to be replaced, replaced the same.
(xiv) Check the limit switch fitted on the crane, if found unsv replaced the same.
(xv) Check step down transformer, single phase preventer, thermal block, MCB, HRC and DBR, if found unsv repalced the same.
(xvi) If VFD installed check the same, if found unsv replaced the same and check all the motions of VFD.
(xvii) Check the pendent, if element and push buttons found unsv replaced the same complete all as specified and directed by Engr-in-Charge. | 1 | Each Job | - | - |
| 4 | Maintenance/serviceing of EOT 02 Ton (electrically operated cranes) by the following method:-
(i) Replacement of gear oil in gear boxes.
(ii) Grease the whole crane.
(iii) Before ferilling the gear boxes clean the gear box for inside and outside by using deisel.
(iv) Checking the wheel condition.
(v) If thruster breaks are used check the level of oil in it. If required to be refilled, refilled the same.
(vi) Check the working of the break if required to change, then change the same.
(vii) Checking the connections of motors.
(viii) Check the condition of motors if required to be rewind, rewind the same.
(ix) Checking the condition of couplings. If required to be change, change the same.
(x) Check the nuts & bolts fitted on the crane. If required to be then change the same.
(xi) Check the wire rope of the crane. If required to be replaced, replaced the same.
(xii) Check the condition of power cables fitted on the crane. If required to be change, change the same.
(xiii) Check the break shoe fitted on the break of the crane, If required to be replaced, replaced the same.
(xiv) Check the limit switch fitted on the crane, if found unsv replaced the same.
(xv) Check step down transformer, single phase preventer, thermal block, MCB, HRC and DBR, if found unsv repalced the same.
(xvi) If VFD installed check the same, if found unsv replaced the same and check all the motions of VFD.
(xvii) Check the pendent, if element and push buttons found unsv replaced the same complete all as specified and directed by Engr-in-Charge. | 21 | Each Job | - | - |
| 5 | Maintenance/serviceing of EOT 1.00/ 0.5 Ton (electrically operated cranes) by the following method:-
(i) Replacement of gear oil in gear boxes.
(ii) Grease the whole crane.
(iii) Before ferilling the gear boxes clean the gear box for inside and outside by using deisel.
(iv) Checking the wheel condition.
(v) If thruster breaks are used check the level of oil in it. If required to be refilled, refilled the same.
(vi) Check the working of the break if required to change, then change the same.
(vii) Checking the connections of motors.
(viii) Check the condition of motors if required to be rewind, rewind the same.
(ix) Checking the condition of couplings. If required to be change, change the same.
(x) Check the nuts & bolts fitted on the crane. If required to be then change the same.
(xi) Check the wire rope of the crane. If required to be replaced, replaced the same.
(xii) Check the condition of power cables fitted on the crane. If required to be change, change the same.
(xiii) Check the break shoe fitted on the break of the crane, If required to be replaced, replaced the same.
(xiv) Check the limit switch fitted on the crane, if found unsv replaced the same.
(xv) Check step down transformer, single phase preventer, thermal block, MCB, HRC and DBR, if found unsv repalced the same.
(xvi) If VFD installed check the same, if found unsv replaced the same and check all the motions of VFD.
(xvii) Check the pendent, if element and push buttons found unsv replaced the same complete all as specified and directed by Engr-in-Charge. | 3 | Each Job | - | - |
| 6 | Material and labour for load testing of crane any type any make infront of rep of Engr-in-Charge and AF auth complete all as specified and as directed.
Note : -
(i) Load will be provided by AF auth.
(ii) Load test shall be carried out by any state govt / central govt or authorised agency of OEM and certificate of load testing shall be provided by the same authority. | 31 | Each Job | - | - |
| 7 | S & F in replacement Gear oil SAF-90 No as per sample, complete all as specified and directed. | 115 | Litre | - | - |
| 8 | S & F in replacement Transformer oil for EOT crane as per sample, complete all as specified and directed. | 100 | Litre | - | - |
| 9 | S & F in replacement Grease as per sample, complete all as specified and directed. | 23 | Kg | - | - |
| 10 | S & F in replacement Contactor 3 phase 24 Amp crane as per sample, complete all as specified and directed. | 5 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
TD.pdf
Tender Documents • 0.67 MB
BOQ_897336.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .