GENERAL- Budget work 2020-21 Improvements with Thoppumpady junction by providing hand rails, drainage and footpath-Work-General Civil work

Amount

Beautification work

2.4.2.A:Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres Cement Concrete Grade M-15 & M-20 - By Mechanical Means

3.13.1.B:Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. Ordinary soil - Mechanical Means - (Depth upto 3 m)

OD34140/2021-2022:Bailing out water using 5 H P Motor and pump set conveyance charges ,cost of oils etc.. complete

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer - (Without formwork)

12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer

12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

55.25:Lifting, conveying and fixing the newly casted RCC covering slabs of any thickness on top of drain in position including all labour charges and miscellaneous expenses etc complete

OD101968/2021-2022:Laying at or near ground level factory made kerbstone of M25 grade cement concrete in position to the reuired line, level and curvature jointed with cement mortar 1:3(1 ement:3 coarse sand) including making joints with or without grooves (thickness of joints except sharp curve shall not be more than 5mm) including making drainage opening wherever reuired etc. complete as per direction of Engineer in charge (length of finished ker edging shall be measured for payment). Precast CC kerb stone shall be approved by Engineer in charge)

OD61928/2021-2022:Construction and filling of granular material by providing graded material comprising of 26.5 mm to 9.5 mm,9.5 mm to 2.36 mm and 2.36 mm below and spreading in uniform layers by manuel in between kerb and side wall of drain mixing by mix in place method with rotavator at OMC ,and compacting with plate compactor to achieve the desired density, complete in cluding the cost of PVC drainage pipe 150mm diameter etc.complete .

OD86289/2021-2022:Supplying and laying interlocking tile 60 mm or nearest size thickness, minimum strength M 30 including providing a layer of 6 mm aggregate for 5 cmthickness, then laying interlock cobbles in lines and levels as per the directions of the departmental offi cers at site inclusive of all cost & conveyancecharges etc. complete.

8.8:Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

55.10.1:Providing and erecting retro-reflectorised Object Hazard Marker 300mm x 900mm Providing and erecting retro-reflectorised Object Hazard Marker sign with 07 years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back support frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly fixed 30cm above ground level by means of properly designed foundation with M 15 grade cement concrete 30cmx30x45cm, 45cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as per approved drawing and clause 801.300 mm x 900 mm

55.12:Providing and fixing of median marker Providing and fixing of median marker made of tough, high impact resistant, injection-molded, thermoplastic body having a mnimum Notched Izod Impact strength value of 600J/m at room temperature, when tested accordance with ASTM D256 and shall retain at least 70% of this value when subjected to accelerted weathering for 1000hrs as per ASTM G155 or UL 746C. The Median marker shall have, fluorescent yellow color retro-reflective sheeting min 10cmx10cm/10cm dia size with reflectivity values as per IRC:67 and ASTM D4956 type XI specifications , edge protected with no exposed edges to prevent edge lifting, vandalism, sheeting damage, etc. and fixed by a combination of epoxy adhesive and anchoring

55.14:Providing and fixing retro-reflectorised ceramic tilesProviding and fixing retro-reflectorised ceramic tiles of size 10cmX20cm using High Intensity Micro Prismatic (Type IV) grade sheeting with 7 years warranty fixed over Ist quality ceramic glazed tiles including cost of glue, cutting charges, fixing with suitable adhisive on concrete or other surface etc complete.

OD86565/2021-2022:Supplying and fi xing Stailess Steel hollow pipe of 304 Grade hand rails. Height 1mtr from fl oor level and 60cm below fl oor level(35cm below groundlevel) with 50mm dia vertical post with 50mm SS Ball and ring base at 3 mtr C/C interval and horizontal 50mm dia hollow pipe at top and horizontalpipe railing 30cm C/C, vertical 25mm dia at 30cm C/C 304 Grade hollow SS pipe with ring base alternatively fi xing in concrete and 3 Nos 25 mm diahollow SS pipe horizontally welding with vertical post. Including all cost of material,fi ttings and labor charges fi xing in concrete etc. complete as perdirection of departmental offi cers.

8.15:Supplying and installation of delineator (Roadway indicators) posts 80- 100cm high above ground level, pained black, and white in 15 cm wide strips, fitted with min. 80 x 100 mm rectangular or 75 mm dia circular retro reflectorized panels at the top with minimum visibility of 300m with provisions to prevent edge lifting and vandalisam, and conforming to clause 806 , IRC-79 and the drawings including fixing to ground (The deleniator shall be of approved type as per specification)

OD25011/2021-2022:Supplying and fixing 120 X 120 mm CI gratings weighing not less than 440gms for drain off water pipe cover at drain side walls including all cost and conveyance of all materials, labour charges etc complete.

OD25012/2021-2022:Supplying and fixing 110mm PVC pipes (6kg/cm2 ) in drain side walls for drain off rain water from road surface including all cost and conveyance of all materials, labour charges etc complete.

OD34166/2021-2022:Engaging man mazdoor for clearing the debris and waste materials

Tree protection

3.13.1.B:Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. Ordinary soil - Mechanical Means - (Depth upto 3 m)

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

13.4.A:Random Rubble Stone masonry (coursed/uncoursed) work in cement mortar 1:3 for substructure complete as per drawing and Technical Specifications

12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer - (Without formwork)

8.8:Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

MOOSA K.I.

Bidder Name

MOOSA K.I.

BINU THOMAS