Construction of 300 nos capacity Kalyana Mandapam, 500 nos capacity Kalyana Mandapam, Archagar Quarters, Staff Quarters, Temple Bus stand development, Car parking arrangements and Devotees Rest Mandapam at Arulmigu Mariamman Temple, Samayapuram

Amount

Dismandling clearing away carefully the stacking matterilas of PCC cement concreteetc.,complete complying with standard specification

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and FILLING GRAVEL Supplying and filling in 'foundation and basement with filling Crushed Stone Sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.

Supplying and filling in foundation and basement with crushed stone sand in layers of not more than 15cm thick well rammed, watered and consolidated etc., complete complying with standard specification.

Cement Concrete 1:5:10 (One Cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Providing Anti-termite treatment to soll adjecent and under building foundation, plinth periphery of the building by application of chemicals of 15 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below. Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers.

Supplying and erecting steel centering including necessary supports for plane surfaces in foundation and basement for reinforced cement concrete works such as column footings, plinth beam, grade beam, stair case steps, bed blocks etc. which require only normal strutting using M.S. sheets of size 90 cm x 60 cm B G 10 gauge stiffeneded with mild steel angles of size 25 mm x 25 mm x 3 mm for boarding laid over silver oak joists of size 10 x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10 cm to 13 cm dia. spaced at 75cm centre to centre or at suitable intervals etc. complete complying with standard specification. (The payment for centering shall be made only after the concrete is laid. The retrieved materials should be taken back by the contractor)

Supplying and erecting steel centering for sides and soffits including supports and strutting up to a height of 3.29 meters for plain surfaces such as RCC slabs, beams TEE or ELL beams, lintels staircases beams etc., with all cross bracings using mild steel B.G. 10 sheets of size 90cm X 60cm stiffeneded with welded mild steel angles of size 25 mm x 25 mm x 3 mm laid over silver oak (Country wood) joists of size 10 cm X 6.5 cm spaced at about 90 cm centre to centre and supported by casurina props of 10 cm to 13 cm diameter spaced at 75 cm centre to center or at suitable intervals etc., complete complying with standard specification in all floors.

For plane surfaces such as RCC Floor slab, roof slab, lintel etc

For square RCC colums & Rectangular column, etc

Curved surface centering

Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers.

Providing and laying in position, standardised Concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of Crushed Stone Sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.

Basement and Foundation

Ground Floor

First Floor

Second Floor

Third Floor

Providing and laying in position, Standardised Concrete Mix M-35 Grade in accordance with 15.456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 425 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser/superplasticiser) in recommended proportions as per 15-9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg of 20mm machine crushed stone jelly and with about (3.3 cu.m) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670 kg of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of 15 Standards. (No separate payment will be made by the Department for the excess usage of materials). ( For Post Tension Slab )

Ground Floor

First Floor

Supplying, fabricating and placing in position M.S. or R.T.S. reinforcement grill for RCC works as per the design given including cost of steel and binding wire etc., complete complying with standard specification. (The contractor will have to make his own arrangements for the supply of M.S. plain rods / RTS rods and binding wire)

Manufacture, supply, install, profile, stressing and cement grouting all post tensioning tendons including. HT strands to IS 14268-1995, Class II with UTS of 183 KN / 260.4 KN per strand, casting, Barrels, Wedges, and duct. Supply and execution of Post tensioning work must be carried out by a specialist agency, with their own equipments, accessories and skilled manpower as per approved construction drawings. The rate quoted shall be inclusive of cost of strand, ducts, supply, fixing, profiling of tendons, stressing, grouting, complete as shown in the drawing and as per specification . The unit rate for Post tensioning shall also be inclusive of all labour, equipment accessories and technical supervision of the post tension system supplier, who will monitor, insure and certify the correctness of the pre-stressing operations.

Brick work in following Cement Mortar 1:5 using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction

Basement and Foundation

Brick work in following Cement Mortar 1:6 using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction

Ground Floor

First Floor

Second Floor

Third Floor

Brick partition walls of 10.80cm thickness using best quality country bricks of size 8-3/4" x 4-1/4" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three crushed stone Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

Ground Floor

First Floor

Second Floor

Plastering with Cement Mortar 1:5 (One cement and five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the concerned officers.

Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.

Weathering course in brick jelly lime concrete using broken brick jelly of size 25mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

First Floor

Second Floor

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to 155 at 25% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Plain Cement Concrete 1:2:4 ( one cement, two M sand and four hard broken stone jelly )using 10 to 12mm jelly for wearing coat including laying,compacting,finishing and curing etc., Complete complying with standard specification.

Ornamental brick masonary Lime mortar 1:2 using Moulded bricks including all varivargams, mould sthambams mokopathrams; koodu, Nasi and all ornamental brick work complete, all pancharams Agarais, Karanakoodu, etc., forming core walls of Rajagopuram /Vimanam complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete 100 cft for Kalkaram up to 15 feet height

Providing Vargapoochu over the corewalls of Vimanams/Gopurams, with Lime Mortor1:15 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Combination Mortor1:1:4 and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. for kalkaram. up to 15 feet height.

Scaffolding charges for Vimanans and gopurams with casurina posts coconut or plam trees wherever necessary for main, form work and providing with Non Flamable Shaded coverings, providing ladder arrangements, country wood plant for working, inspection etc, complete hire charges only for erection, maintenance and removing the same on completion of the work1 sqft.Complete up to 15 feet height

Paving the floor with best quality Double Charged Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with following ceramic tiles of size 305 x 305 x 8 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 4' x 2' and above of 18 to 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Engineer concerned before use on work, etc., complete as per standard speicification.

Dadooing walls with following best approved quality, colour glazed tiles of following sizes 450mm x 300 mm x 8mm set in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing in position T . W . Scantlings over 2 m & below 3 m in length including Labour wrought and put up in position of frames inclusive of fixing holdfasts for doors, windows, ventilators etc.,.as directed by officers incharge .

Supplying and fixing of Teak Wood ornamental temple type door shutter using Teak wood frame of size 150mm x 120mm of double leaf in position using 50mm thick planks shutters with necessary brass hinges 125x30mm - 10 nos ,brass aldrops 300x16mm - 2 nos,tower bolts 400mm long x 12mm dia - 4 nos ,brass handle 200mm long - 4 nos, aluminium door stopper - 2 nos including two coat of varnishing and inlcuding labour charges for fixing in position etc.,complete as directed by the departmental officers.

Supplying and fixing of solid core flush shutter with teakply on both side with teakwood lipping alround 35mm thick including cost of materials,labour charges etc.,Complete complying with standard specification.

Supplying and fixing of fibre reinforced polymer shutter with F.R.P.door frames made out of F R P sheets of 3 mm thick of overall size 65 mm x 50 mm with rebate suitably reinforced using M S angles / flats cost of holdfasts and solid core F R P shutter panel of 5 mm thick and hpllow core frames of 3 mm wall thickness for styles and rails etc, and overall provision for hinges with core filling either with agro based materials (or) fibre proof foam (in case of lights weight) and the shutters provided with good quality seasoned treated hard wood cleats wherever found necessary for fixing furniture fittings like, alu. hinges, alu. tower bolts, alu. aldrop (to match finish of the door shutter) etc., complete complying with standard specifications. The rate shall be inclusive of all alu. fittings. and labour charges.-Single leaf.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 132GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

Supplying and Fixing UPVC (unpoly vinyl choride) Louvered type Ventilators of from the profile the size of outer frame 60 mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free,the profiles are multi chambered sections with wall thick of 2mm.The EPDM rubber ( black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from the Executive engineer before use on work.

Supplying and fixing ornamental M.S Grill of approved design for open court yard grill with doors and window openings etc.., using necessary mild steel flats for inner and outer member which should be fixed an edges including priming coat of best approved quality red oxide primer etc.., complete with standard specification.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete ( SR page no 57, Item No 244 )

Manufacturing ,supplying and fixing of stainless steel hand rails for staircase using 50mm dia 304L grade stainless stell pipe of 1.60mm thick will be provided with tubular supports made of 304L grade stainless steel pipe of 25mm dia of 1.60mm thick welded to the railing.The supports will be grouted in the wall and provided with 93 mm thick SS circular base plate of 304 grade.The rate shall includeed for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing,bonding,cutting,grindig,conveyance,welding charges , electrical charges etc.,Complete complying with standard specification

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide inlcuding priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification.

Painting two coats of newly plastered wall surface with ready mixed water based emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and fixing in position best approved of ISI quality of PVC rain water down fall pipes having a pressure of 4 Kg./sq.cm including cost of necessry PVC shoe, PVC bend, gratings of required diameter and special clamps, brass screws, nails, etc. and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc. complete. The rate shall be inclusive of cast of removable iron grating. The PVC pipe shall be fixed in wall with special type of clamps. Special type of "U" clamp at the centre of the pipe line shall be fixed in addition to those for more than 3.0 M pipe length complying with standard specification. 110 mm dia PVC pipe

110mm dia

Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.....

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position best Indian make wash hand basin of size 550mm X 400mm and approved brand and quality with a pair of C.I. Brackets fixed to wall with necessary teakwood plugs and brass screws one No. of 15mm C.P. Pillar tap, 32mm C.P. Waste coupling, rubber plug and chain, 32mm G. I. Union, 32mmG. I. Waste pipe, 15mm dia G. M. Wheel valve 15mm brass nipple and nylon connection including cost of white lead TW Plugs clamps, rubber washer, etc., complete. (The wash hand basin should be got approved from the Engineer before use on works). White glazed earthern ware wash hand basin without pedestal

Supply and fixing in position of best Indian make white glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Construction of INSPECTION CHAMBER following clear sizes 600 x 600 mm including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level etc.,Complete complying with standard specification.

75 mm PVC pipe

110 mm PVC pipe

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separate provision for fixing UPVC specials needs to be allowed etc., Complete complying with standard specification.

110mm dia PVC specials

Elbow

75mm dia PVC specials

Elbow

Supplying and fixing of PVC Water tank including cost of materials,labours etc.,Complete complying with standard specification.

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC/Fibre glass framed 600x450x5.5mm thick mirror,shelf type with hard board backing of approved colour fixed with brass screws,rawl plug.etc., Complete complying with standard specification

Supplying and fixing approved best quality aluminium anodised towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and cp screws etc., Complete complying with standard specification.

Supplying and fixing best approved best quality brass cp soap tray of size 150x100mm including cost teak wood plugs, brass screws etc., Complete.complying with standard specification.

Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

50mm dia

32 mm dia

20 mm dia

Supplying and fixing in position the following PVC Specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of UPVC pipes, jointing the UPVC specials and painting with two coats with good variety and best quality synthetic enamel paint over a coat of red oxide primer and jointing the specials with pipe line using shellac etc, complete complying with standard specification. (The UPVC specials should be got approved by the Executive Engineer UPVCneer concerned before use on works.)

UPVC 50mm dia specials

Elbow

union

UPVC 32mm dia specials

Elbow

Union

UPVC 20mm dia specials

Elbow

Union

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Providing expansion joint in RCC floor slab for 12.5mm width using polysulphide as sealent on the top and bottom for a depth of 7.5mm each and packing the inner space using compressible non-absorbent filler materials including cost of labour for cutting and fixing filler materials and laying polysulphide sealent with necessary spatula etc., complete complying with standard specifications and as directed.

Providing and Laying Granular sub base course grade-V consisting of well graded material conforming to the grading in the table No.400-1 Mixing in amechanical mix plant at OMC,Carriage of mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller to achive the desired density etc.,Completet complying with standared speccification.MORTH No.111,112,401,900.

Supplying and Laying of interlocking paver block stone 83mm thick over a base layer of crushed stone sand filling including .cost of materials laying and labour charges etc,complete.

ELECTRICAL ARRANGEMENTS

Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End [DATA A]

Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End[DATA-B]

Wiring with 3 x 1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End [DATA c]

Supply and fixing of 4' 20W crystal slab LED tube light fittings completed TW round blocks on wall or ceiling with connection with PVC unsheathed copper leads for terminals to the fitting [DATAD]

supplying and fixing of 7w/9w w LED BH point (DATA-E)

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.[SD 526]

Supply and fixing of 150 w LED flood light with integrated driverwith special clamp with PVC and unsheathed copper leads from the terminals to the fitting with LED bulb make Philips or Crompton.[DATA E]

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Lower end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") [SD 107]

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall [SD 115]

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan[SD 120]

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .[SD 535]

Supply and fixing of 2nos.6A two module 5 pin socket, 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End [SD 470]

Supply and fixing of 2 nos.6/16A two module socket , 2 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections. Lower End [SD 495]

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth conection only. Higher End [SD 613]

Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End [SD 626]

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End [SD 660]

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour [SD 428]

Supply and fixing of 3nos.6A two module 5 pin socket, 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End ( SD- 476 )

Supply and fixing of 1nos.6/16A two module socket , 1 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections.Higher End ( SD- 488 )

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) ( SD- 140 )

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour [SD 430]

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour. [SD 432]

Supply and Run of 4 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm PVC insulated SC unsheathed copper wire with painting of suitable colour.[SD 442]

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour. [SD 446]

Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete [SD 131]

Supply and fixing of 250 A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only. [SD 726]

Supply and fixing of 200 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing. [SD 737]

Supply and erection Testing and commissioning of 1 No. 125 Amps floor mounted cubical panel board fabrication out of 14 SWG sheet steel, dust and vermin proof, suitable for operation on 440V, 3 phases, 50Hz AC supply with bus bar chamber comprising of 4Nos. 1" x 1/4 copper flats for RYB and neutral with 2 Nos. 1" x 1/8 copper flat for earth bus to be provided at the cubical. The following cubical TPN switch with fuse and neutral link. 200A FP MCCB -1no's (L&T/Siemens) incoming and 63A TPN MCCB - 4 Nos (L&T/Siemens) Multifunction meter - 1no The main switches to be interconnected with the bus bar with suitable rigid tinned copper with necessary hylum sheet separators between bus bars, main switch etc and with double earth connection of the main switches. The panel board to be painted powder coating with stencil marking of the main switches etc with name, capacity, cable size etc., (DATA-F)

Supply and erection of 1 No. 200 Amps floor mounted cubical panel board fabrication out of 14 SWG sheet steel, dust and vermin proof, suitable for operation on 440V, 3 phases, 50Hz AC supply with bus bar chamber comprising of 4Nos. 1" x 1/4 copper flats for RYB and neutral with 2 Nos. 1" x 1/8 copper flat for earth bus to be provided at the cubical. The following cubical TPN switch with fuse and neutral link. 200A FP MCCB -1no's (L&T/Siemens) incoming and 100A FP MCCB - 4 Nos (L&T/Siemens) 63A TPN MCCB - 4 Nos (L&T/Siemens) Multifunction meter - 1no The main switches to be interconnected with the bus bar with suitable rigid tinned copper with necessary hylum sheet separators between bus bars, main switch etc and with double earth connection of the main switches. The panel board to be painted powder coating with stencil marking of the main switches etc with name, capacity, cable size etc., The capacity of the MCCB size of incoming and outgoing cable the place to which the supply is fed should be mounted on switch chamber. The panel board should be mounted on 100mmx 50mmx MS channel provided all around the bottom of the panel. The whole arrangement should be erection of an angle iron frame pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 1.0 m from the ground level and with necessary earth connection. (Main Panel) [DATA E

Supply and Laying of 3 1/2 x 150 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. [SD 752]

Supply and clamping of 3 1/2 x 150 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps [SD 228]

Supply and fixing of brass cable gland for 3-1/2 x 150 sq.mm. PVC armoured LTUG cable with earth connection [SD 192]

Supply and providing cable end termination of 3-1/2 x 150 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete Supply and providing cable end termination of 3-1/2 x 150 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete [SD 241]

Supply and clamping of 3 1/2 x 120 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps ( SD 227 )

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection ( SD 191 )

Supply and providing cable end termination of 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete Supply and providing cable end termination of 3-1/2 x 150 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete ( SD 240 )

Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. ( SD 751 )

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry [SD 233]

Design, engineering, supply, erection, testing, commissioning and handling over of the 13 persons capacity (884kg) passenger lift, gearless with machine room as per the following technical specification: TECHNICAL SPECIFICATIONS:- 1) Location: Arulmigu Subramaniya Swamy Temple, Vallakottai, Sriperumputhur Taluk, Chennai 2) No. of lifts / Type of Lift: One / SUKRANTI-Passenger 3) Capacity of lift: 13 persons capacity (884 Kgs) passenger lift 4) Speed: 1.00 Mtr Per Second. 5) Type of Drive: Microprocessor based Variable Voltage Variable frequency (V3F) drive with enhanced ride comfort and levelling functions. 6) Position of Machinary: Directly above the lift well - GEARLESS 7) No of floors: Basement Floor + 2 Floors (3 landings) 8) Total travel : 12.96 Mtrs 9) Leveling accuracy:- High level accuracy with smooth and jerk free stopping. 10) Design of car: Stainless Steel hairline finish combination car body with SS finish ceiling (sleek medium circular LED lights, regular circular fans SS Handrail & PVC flooring. 11) No. of landing entrance : Basement Floor + 2 Floors (3 landings) 12) No. & position of car entrance : one in front only. 13) Size of lift well: 2500 mm x 1900mm (width x depth) 14) Lift Car inside size: 2000mm x 1100mm x 2200mm (width x depth x height)

28) Servicing and maintenance: Lift contractor should provide free comprehensive servicing and maintenance during the guarantee period. 29) Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, invertor, under voltage protection system etc. Complete with all accessories.30) Provision if Intercom with phone:- To be provided by the lift contractor 31) Lift license: Preparation of drawings, lift contractor should do payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act.32) Floor announciator with music: To be provided in the car.33) Special features:(a) Battery Operated Emergency Light and Alarm Bell(b) Call Register Signal And Vf Door Operator (c) Automatic Rescue Device. (d) Stainless Steel Button with S.S. Cover.(e) Dot Matrix Led D & P Indicators in Car & Landings - Orange Colour.(f) Floor Annunciator with Music.(g) Firemans Switch (h) False Ceiling in Car.(i) Fire Rating of Landing Doors-One Hour (j) Infra Red Door Screen (k) Overload warning Indicator (l) Laminated Mirror At Rear Side. (m) Scaffolding (n) Two way Intercom with press & speak in Cop (o) Provision for Epabx (p) Free Service for One Year (q) Pit Ladder (r) Ss Handrail (s) Lift License (t) Minor Builders Work (u) Provision for Cctv Camera - Ip (Cat6 Flat Travelling Cable) 34) Over speed governor, phase failure and phase reversal relay, alarm bell, T Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, electro magnetic brake with compression spring etc. 35) Guarantee: Gurantee for the materials and lift firm should offer workmanship of equipments complete for a period of not less than one year.(S.R)

Supply and laying of 3½x25 sq mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 meter putting 0.15 meter layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (For Lift 1 & 2) [SD 204]

Supply and clamping of 3½ x 25 sqmm PVC armoured LTUG cable on wall with earth connection (For Lift 1 & 2) [SD 222]

Supply and providing cable end termination of 3½ X 25 Sqmm PVC LTUG Alu.armoured cable with necessary alu.cable sockets by crimping etc with electrical connection complete [SD 235]

Supply and fixing of brass cable gland for 4 x 25 sqmm PVC armoured LTUG cable with earth connection [SD 185]

Supply and run of 25mmx3mm copper flat with with screws on wall / floor for earth connection. Lift earth. (Lift)1&2 [SD 76]

Supply and fixing of 4 way vertical DB neutral MCB distribution board in sheet steel enclosure double door of double door type with metal door with IP43 protection with 63 A 4 pole MCB isolator as incoming and 2 Nos. 32A TP MCB (Hager) and 6 Nos 32A SP MCB's and outgoing on Angleiron frame with earth connection. The MCBDB and MCB's should be with the ISI mark (like Hager / Legrand make) (Lift) (DATA H)

Earthing as per ISI specification with an earth electrode of 2.1mtr class ‘B” GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mmx6mm with necessary funneling arrangement with necessary masonry work with 38 mm RCC cover slab for brick masonry works. [SD 233]

Supply, Erection, Testing, Commissioning and Handing over of 1 No 82.5 KVA Diesel Generator set (Make: Kirloskar/ Ashok Leyland/ Equivalent) of 0.8P.f. Three Phase, 415/420Volts, 50c/s, 1500 RPM as detailed below with 82.5KVA AMF 1.ENGINE: Water cooled Diesel engine suitable for generator application with a shaft Output of 310 BHP at 1500 RPM under NTP Condition as per BSS 5514/IS 10000. The engine shall comprise the following standard scope of supply: 1.Dry type Air cleaner 2. Expansion bellow 3. Radiator, Radiator fan and mounting 4. Air to air charge cooler 5. Exhaust Gas turbo charger 6. Lube oil cooler and Lube oil filter 7. Fuel filter (pre and micro) 8. In-line Mono-block fuel injection pump with governor and fuel feed pump 9. Electronic governor 10.24V Battery charging alternator 11. 24V Volt electric starter motor 12. Engine test Certificate 13. Residential Muffler 14. Fly Wheel with starter ring, dynamo, standard batteries with cable, flexible exhaust piping.

27. MCCB of 250A capacity with magnetic thermal over lead release, instant start circuit trip and under voltage release switch. 28.Rectangular copper bus bars (1No for each phase, neutral and earthing terminal) of adequate capacity duty colour coded with head shrinkable PVC sleeves.29. 1No Mains Voltage monitor30. Hooter/Audio Alarm for indicating set fails to start and for DG O/L31. 1 Set Timers32. Audio and visual indication arrangements for:a.Low lubricating Oil pressure. High water temperature c.Over speed33. 1No Earth fault relay34. Isolator to Isolate the neutral Note:1.The control panel should be complete with necessary fuses, cables, labels, other accessories with neutral isolation arrangements.2.The engine should trip for the followinga.Low lubricating Oil pressure b.High water temperature c.Over speed4.ACOUSTIC ENCLOSURE:Acoustic enclosure shall be powder coated and fabricated of16 SWG CRCA MS sheet. The silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC Machine to maintain dimensional accuracy of hole within 0.1 mm Powder coating done after seven-tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 Kg/m density mineral wool of 100mm thickness as Acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1 Mt. distance shall be less than 75 DBA average or as per CPCB norms

Note:1.The control panel should be complete with necessary fuses, cables, labels, other accessories with neutral isolation arrangements.2.The engine should trip for the followinga.Low lubricating Oil pressure b.High water temperature c.Over speed4.ACOUSTIC ENCLOSURE:Acoustic enclosure shall be powder coated and fabricated of16 SWG CRCA MS sheet. The silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC Machine to maintain dimensional accuracy of hole within 0.1 mm Powder coating done after seven-tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 Kg/m density mineral wool of 100mm thickness as Acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1 Mt. distance shall be less than 75 DBA average or as per CPCB norms Canopy fabricated on CNC machines with dimensional accuracy of 0.1 mm so as to increase its durability. Special designed supporting rips/Structures are used in canopies so as to give sturdiness and to reduce the vibration of the DG sets if any.World class Cooling package:Canopies shall have cooling package for which it can also perform at 45 degree C/ambient temperature. No grouting required on the ground, only a level surface capable of withstanding the DG weight. Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set.The Gen set frame shall also be provided with hooks for unloading.Temperature rise inside the canopy:Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well within 57 deg centigrade. 5.FUELTANk 300 liters Removable fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connection and mechanical fuel gauge. Fuel tank can be easily removed for clearing or any maintenance. BASE FRAME The base should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall be provision for the mounting of acoustic enclosure on it. The supply of generator set includes loading. Unloading and transportation charges.7. Battery:2 Nos 12V 180 AHR Battery (SR)

Supply of lubricating oil and first charging of starting battery and supply of 100 Ltrs for 82.5 KVA diesel to run the Gen set for minimum of 8 hours diesel to run the Gen set for minimum of 8 hours (Rs.110+transport Rs.3.22=113.22)

Civil work for 82.5KVA DG 1 no Area Size 6Mtr x 4 Mtr reactangle shape pedestal RCC concrete height 1.5 mtr from ground level and including Brick arrangement and Plastering Work (MR)

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. [SD 413]

Preparation of Electrical schematic diagram, site plans, physical layout 5 copies and payment of CEIG fees submission of completion report, rectification report, obtaining drawing approval, safety certification etc.,

Supply and run of 25mm x 3mm copper flat with screws on wall / floor for earth connection. DG & 2Nos Panel Earth [SD 76]

Supply and fixing of 2 way MCB sheet steel enclosure metal box with 1 No 40A DP MCB in flush with wall with earth connection only. (Street Light, Motor & UPS 4 Nos) [DATA G)

Earthing as per ISI specification with an earth electrode of 2.1mtr class ‘B” GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mmx6mm with necessary funneling arrangement with necessary masonry work with 38 mm RCC cover slab for brick masonry works. [SD 233]

Supply and fixing of 63A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with [SD 718]

Supplying and running of one of 8 SWG copper wire in suitable PVC pipe on wall ceiling/ground /Floor for earth connection. ( SD 458)

Sub Total

shanmathi constructions private limited

PV Infra Projects