CONSTRUCTING 600M HT ABC AND ERCTING 100kVA TRANSFORMER AT KILAVIKULAM-2

Providing one Coi l Earthusing GIearthwire,diggingseparatepitat standard distance away from the pole/structure & backfilling.

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation &foundation

Providingyardmetallingwith6mm&40mmthickbluemetalas specified after constructing a curb wall.

FittingandprovidingoneHTStayfor11kVpoleincl.digging&back filling pit.

FittingoneAdditional2.4m/3mChannelcrossarm(100x50x6mm),in existing 11kV DP incl. conveyance of materials.

Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc.

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting5channelcrossarms,ABswitch,DOfuse,LA,HT&LT connections on existing DP, 3 LT fuses.

Drilling hole of various sizes on existing Channel/Cross Arm.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Providingconcretemuffing(0.45x0.45x1.5m)inclusiveofcostofall material (as per specification).

Additional rate for excavation of one Pit for HT Pole/HT Stay in Rock.

Additional rate for excavation of one Pit for Coil Earthing in Laterite

AdditionalrateforexcavationofonePitforHTPole/HTStayinHard Laterite.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Conveyance of one km 11kV line materials from section store/stackingplace to the work site (excluding poles).

Fitting one No. Section fuse on LT line with dropping cables, crimpingsockets, connecting with bolt&nut etc.

ErectionofLT3waydistributionboxonexistingcrossarmgiving connection incl. cable and earth connection (excluding earthing).

Fabricatingandsupplyof3wayLTpanelboardofsize1.40(approx.)x

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Fitting one set AB switch and giving connection

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

Fitting and providing one Strut using HT PSC pole incl. digging &back filling pit.

Fiting One no MVT on existing cross arm excluding termination work(for One phase) of any rating for 11 kV AB Cable

DoingonecableendterminationonHTABCofsizesUpto 3x150+1x120 sqmm

FittingoneAdditional75x40mm,1.8mChannelcrossarminexisting single pole incl. conveyance of materials.

FittingoneAdditionalVcrossarminexistingsinglepoleincl.conveyance of materials.

Erection of suspension clamp for 11KV ABC of any size

Erectingone100kVATransformertoexistingDPandgivingconnections, incl. loading & unloading, excluding transportation.

Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading.

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Installation of Pre-insulated straight through joints for 16sqmm cable

Installation of Pre-insulated straight through joints for 50sqmm cable

Installation of Pre-insulated straight through joints for 70sqmm cable

Erection of suspension clamp for LT ABC of any size

InstallingOneNo.4waySatelliteConnectorofsizeMain:16to95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size

TransportingLTABCbyhiredvehicletoadistanceupto5kmand carring up to 2 drum including loading and un loading using crane

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50sqmm with bare/insulated Messenger through existing poles

Dismantling(withoutdamage)onekmLT3ph4wireOHline,cross arms, insulators and stacking the conductors in rolls.

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Providing Stay for LT poles incl. digging & back filling pit.

Insertion o fone L T PSC pole inexisting Sp hOH lineincl.digging& back filling pit, fitting cross arm, insulator, binding etc.

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

CONSOLIDATED BOQ (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Quoted Amount of BOQ1 in figures

GST Rate in percentage

Please Enable Macros to View BoQ information