All Schedules Bend T NO3 D54x4 SA213 T91 from Bottom End Bend T NO6 D54x4 SA213 T91 from Bottom End Bend, T, NO10, D54x4 SA213 T91 from Bottom End Bend, Tubes, for Wall Blower (Set of 2 Bend Tubes) suitable for Seal Box Drawing No.2-09-001-00531, for WT1608 500MW Cut Out/Pull Out Bends for ASLDS for Cut Out/Pull Out Bends suitable for 500MW Unit Cut Out/Pull Out Bends for Temperature Probes for Cut Out/Pull out Bends suitable for 500MW Unit Furnace Rear Radiant Roof Tube Bend of D57x6, SA213 T11, L equal to 1272mm (ARC 500mm + ARC 272mm + ARC 500 mm), Radius R151 as per 0-00-027-43872 LRSB Opening Bend, Pitch 127 (1 Set equal to 2 Bends) LRSB Opening Bend, Pitch 63.5 (1 Set equal to 2 Bends) Peg Pin Item No.03, Drawing No.0-007-226-00433, IS 2062 Grade.A Plain Tube, 51x5.6 mm, SA210, Grade.C, Water Wall Plate Item No.04, Drawing No.0-007-226-00433, IS 2062 Grade.A Rear Arch Tube Bend, OD 51x5.6mm, Material: SA210 Grade.C, BHEL Drawing No.0-00-027-43879/01 Rear Arch Tube Bend, Variant No.01, FRW-01, Rifle Tube D51x5.6, 1285 Long, as per Drawing No.1-07-226-00456 Rear Arch Tube Bend, Variant No.01, FRW-09, Rifle Tube D51x5.6, 1286 Long, as per Drawing No.1-07-226-00457 Rear Arch Tube Bend, Variant No.02, FRW-02, Rifle Tube D51x5.6, 1286 Long, as per Drawing No.1-07-226-00456 Rear Arch Tube Bend, Variant No.02, FRW-10, Rifle Tube D51x5.6, 1287 Long, as per Drawing No.1-07-226-00457 Rear Arch Tube Bend, Variant No.03, FRW-03, Rifle Tube D51x5.6, 1287 Long, as per Drawing No.1-07-226-00456 Rear Arch Tube Bend, Variant No.03, FRW-11, Rifle Tube D51x5.6, 1288.5 Long, as per Drawing No.1-07-226-00457 Rear Arch Tube Bend, Variant No.04, FRW-04, Rifle Tube D51x5.6, 1288.5 Long, as per Drawing No.1-07-226-00456 Rear Arch Tube Bend, Variant No.04, FRW-12, Rifle Tube D51x5.6, 1292.5 Long, as per Drawing No.1-07-226-00457 Rear Arch Tube Bend, Variant No.05, FRW-05, Rifle Tube D51x5.6, 1292.5 Long, as per Drawing No.1-07-226-00456 Rear Arch Tube Bend, Variant No.05, FRW-13, Rifle Tube D51x5.6, 1296.5 Long, as per Drawing No.1-07-226-00457 Rear Arch Tube Bend, Variant No.06, FRW-06, Rifle Tube D51x5.6, 1296.5 Long, as per Drawing No.1-07-226-00456 Rear Arch Tube Bend, Variant No.06, FRW-14, Rifle Tube D51x5.6, 1301.5 Long, as per Drawing No.1-07-226-00457 Rear Arch Tube Bend, Variant No.07, FRW-07, Rifle Tube D51x5.6, 1301.5 Long, as per Drawing No.1-07-226-00456 Rear Arch Tube Bend, Variant No.07, FRW-15, Rifle Tube D51x5.6, 1288.5 Long, as per Drawing No.1-07-226-00457 Rear Arch Tube Bend, Variant No.07, FRW-15, Rifle Tube D63.5x7.1, 1653 Long, as per Drawing No.1-07-226-00457 Rear Arch Tube Bend, Variant No.08, FRW-08, Rifle Tube D51x5.6, 1288.5 Long, as per Drawing No.1-07-226-00456 Rear Arch Tube Bend, Variant No.08, FRW-08, Rifle Tube D63.5x7.1, 1653 Long, as per Drawing No.1-07-226-00456 RH Front Coil BOT Bends Element-10 - 60 and 120 Deg., D54x4, T22 RH Front Coil BOT Bends Element-11 - 60 and 120 Deg., D54x4, T22 RH Front Coil BOT Bends Element-12 - 180 Deg. RH Front Coil BOT. Bends Element, 1-120 Deg., D63.5x4, TP347H RH Front Coil BOT. Bends Element, 1-60 Deg., D63.5x4, TP347H RH Rear Coil BOT Bends Element-11, Dia.54x4, T91, Drawing No.2-16-079-04049 RH Rear Coil BOT Bends Element-12, Dia.54x4, T91, Drawing No.2-16-079-04049 RH Rear Coil BOT Bends Element-4, Dia.54x4, T91, Drawing No.2-16-079-04049 RH Rear Coil BOT Bends Element-5, Dia.54x4, T91, Drawing No.2-16-079-04049 RH Rear Coil BOT Bends Element-8, Dia.54x4, T91, Drawing No.2-16-079-04049 RH Rear Coil BOT Bends Element-9, Dia.54x4, T91, Drawing No.2-16-079-04049 RH Tube OD 63.50x4.00 - SA213 TP347H (Qty in Meters) RH.SCS Tube, MK.NO.RH.SCS-16 for Steam Cooled Spacers for Re-heater RH.SCS Tube, MK.NO.RH.SCS-23 for Steam Cooled Spacers for Re-heater Rifle Tube D63.5x7.1, SA210 Grade.C, 0-007-226-00433 Rifle Tube OD 51x5.6 mm- SA210 Grade.C Saw Cut Pin Item No.02, Drawing No.0-007-226-00433, IS 2062 Grade.A SH Divisional Panellete Bend No.8, Size: D44.5x7.1, Material: SA213 T22, Drawing No.1-11-095-02298 SH Divisional Panellete Bend No.9, Size: D44.5x7.1, Material: SA213 T22, Drawing No.1-11-095-02298 SH Divisional Panellete Bends, Drawing No.1-11-095-02298 (1 Set equal to 09 Nos) Straight Tube OD 38.10x5.00 - SA210 Grade.C for Hanger Tube Straight Tube OD 44.50x5.00 - SA210 Grade.C for Rear Tube Straight Tube OD 44.50x7.10 - SA210 Grade.C for Hanger Tube Straight Tube OD 47.63x8.60 - SA210 Grade.C for Hanger Tube Swaged End of Radiant Roof Tube D63.5x6.3 mm to D57x6 mm of 500mm Length, SA213 T11, as per 0-00-027-43852 Swaged Tube, Rear Hanger Rifled Tube D63.5x12 to D51x5.6, SA210 Grade.C, as per 3-07-225-11465 Tube Insert for Access Door Assembly Tube, Economiser, Straight, 38.1x4.5mm, Material: SA210 Grade.A1 Tube, SH.SCS Tube MK.NO.SCS-5 for Steam Cooled Spacers for Super Heater Water Wall Bends for Instrument Inserts for Cut Out/Pull Out Bends suitable for 500MW Unit Water Wall Bends for Observation Doors for Cut Out/Pull Out Bends suitable for 500MW Unit Water Wall Bends for Stoped Observation Doors for Cut Out/Pull Out Bends suitable for 500MW Unit
# Schedule Awarded To Bids Value 1 Bend T NO3 D54x4 SA213 T91 from Bottom End BHEL REGIONAL OPERATIONS DIVISION 1 ₹36,110 2 Bend T NO6 D54x4 SA213 T91 from Bottom End BHEL REGIONAL OPERATIONS DIVISION 1 ₹26,110 3 Bend, T, NO10, D54x4 SA213 T91 from Bottom End BHEL REGIONAL OPERATIONS DIVISION 1 ₹17,430 4 Bend, Tubes, for Wall Blower (Set of 2 Bend Tubes) suitable for Seal Box Drawing No.2-09-001-00531, for WT1608 500MW BHEL REGIONAL OPERATIONS DIVISION 1 ₹51,600 5 Cut Out/Pull Out Bends for ASLDS for Cut Out/Pull Out Bends suitable for 500MW Unit BHEL REGIONAL OPERATIONS DIVISION 1 ₹51,600
Show All 62 Schedules
