REPAIR / MAINTENANCE OF COOLING APPLIANCES OF UNSERVICEABLE SPARES AND FIXTURES AND ALLIED WORKS AND REPAIR/MAINTENANCE OF CEILING FANS AND GEYSERS INCLUDING REPALCEMENT OF UNSERVICEABLE SPARES AND FIXTURES AND CONNECTED ITEMS OF CHARDAUR AREA UNDER

Amount

Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Disconnecting of ceiling fans of 1200/1400 mm sweep from ceiling rose/connector for cleaning,servicing /oiling and greasing of fan by using appropriate grade of oil/grease and re-hanging the same after proper cleaning and making connection with ceiling fan/connector with flexible wire of size 23/0076 copper conductor multi stranded as directed by Engr-in-Charge.

Disconnecting of ceiling fans of 1200/1400 mm sweep from ceiling rose/connector for re-winding,servicing /oiling and greasing of fan by using appropriate grade of oil/grease and replacing defective parts such as bush bearing , split pin rubber bush, capacitor etc and re-hanging the same after proper cleaning and making connection with ceiling fan/connector with flexible wire of size 23/0076 copper conductor multi stranded as directed by Engr-in-Charge. (NOTE :- Parts/spares will measured and paid separtely under respective item of the schedules).

Rewinding of ceiling fan 1200 mm sweep AC 230 volts single phase with super enamelled copper winding wire of appropriate / existing gauge / size including packing, insulating material soldering varnishing, assembling and testing material soldering varnishing, assembling and testing including transportation charges to and from contractor's workshop complete all as specified and directed.

Description all as per srl item No 4 here in before but 1400mm sweep.

S&F bearing of ceiling fans for ceiling fans of 1200/1400mm sweep to suit for different makes of fans of approved quality including necessary greasing Make- NBC/SKF/NORE.

S&F bushes gun metal suitable for ceiling fans 1200/1400mm sweep complete all as directed at site.

S&F rubber bushes and reel type synthetic rubber with 14.5 mm hole suitable for fan hooks for hanging of ceiling fans.

S&F split pins of galvanised iron 1/8" dia, 2 length all as approved by Engr in charge.

S&F down rod 30cms long made out of heavy grade MS pipe with necessary threading at both ends holes as required with suitable matching colour of ceiling fan 1200/1400mm as directed by Engr in charge.

S&F top/bottom canopy of required size complete with tightening screws.

S&F condenser/capacitor suitable for 230 volts single phase ceiling fan 1200mm /1400 sweep of any make and quality of capacity 2.5 MFD Make- Bajaj/Seimen/Tibcon/Usha.

Description all as per srl item No-11 hereinbefore but 3.15 MFD.

S&F fan blade made out of aluminium suitable for any make and sweep and colour of ceiling fan as directed at site by Engr -in-charge.

Painting of ceiling fan 1200/1400mm sweep AC 230 volts single phase complete in situ or at contractor workshop with synthetic enamelled white/matching paint by spraying one cost including filling of cavities after cleaning all dust and marking SM/MES NO with black enamelled paint .

S&F body screw and blade screw of ceiling fan 1200mm/1400 mm sweep off sizes.

Supply & fixing ceiling fan 1200 mm sweep AC 230 volts single phase including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified.Make: Bajaj/CG

Taking down exhaust fans any size, sealing cable end, and dismantling blade and removing fan and blade to contractor workshop for repair/overhauling/painting etc.

Rewinding of exhaust fan 300mm to 450mm sweep AC 230 volts single phase with super enamelled copper wire of appropriate size including packing insulating material, soldering, varnishing, assembling and testing including transportation charges to and fro from contractor's workshop complete all as specified.

S&F ball bearing suitable for exhaust fan 300 to 450mm sweep of different make . Make of bearing NBC/SKF/NORE.

S&F condenser/capacitor suitable for 230 volts single phase exhaust fan 300mm to 450 sweep of any make and quality of capacity 4 MFD Make- Bajaj/Seimen/Tibcon/Usha.

S&F fan blade, complete with tightening bolts/screws, made of aluminium suitable for any make and colour of exhaust fan as directed at site by Engr -in-Charge

Painting of exhaust fan 300 to 450 mm sweep AC 230 volts single phase complete with synthetic enamelled white/grey/matching paint by spraying one coat including filling of cavities after cleaning all dust and marking SM/MES NO with black enamelled paint . .

Fixing only exhaust fan 300 mm to 450 mm and connecting up including provision of flexible copper cable 23/0.0076 from ceiling rose or connector to fan.

Supply & fixing exhaust fan 300 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified.Make: Bajaj/CG

Supply & fixing exhaust fan 350 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified.Make: Bajaj/CG

Supply & fixing exhaust fan fresh air 250 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified.Make: Bajaj/CG

Disconnecting / taking down water heaters (Geysers) of any make & capacity, horizontal or vertical type their existing locations, for carrying out overhauling / repairs from complete all as specified and directed.

Overhauling, repairing, reassembling, refixing, installation of water heaters / Geysers to their original position, making all necessary water & electric connections and testing complete all as specified and directed. (Parts renewed shall be measured and aid separately under appropriate items).

Supply only heating element 1.5 KW (ISI Marked) suitable for geyser of 25 liters capacity, horizontal or vertical type any make all as specified and directed.

Supply only heating element 2 KW (ISI Marked) suitable for geyser of 50 liters capacity, horizontal or vertical type any make all as specified and directed.

Supply only thermostat, minimum 300 mm long, suitable for any make & type of geyser 25/50 liters capacity horizontal or vertical type all as specified and directed.

Supply only indicating lamp for geysers of any type make & capacity all as specified and directed.

Supply only door assembly comprising of inlet & outlet thermostat housing with gasket complete with bolts, nuts, washers, washers screws & packing etc. suitable for 25 liters capacity horizontal or vertical geysers all as specified and directed.

Supply only door assembly comprising of inlet & outlet thermostat housing with gasket complete with bolts, nuts, washers, washers screws & packing etc. suitable for 50 liters capacity horizontal or vertical geysers all as specified and directed.

Supply and filling up glass wool for geysers of 25 ltrts capacity all as specified and directed.

Supply and filling up glass wool for geysers of 50 ltrts capacity all as specified and directed.

M&L for repairing leakage of inner copper tank of geyser (any make), 25 litres capacity by brazing including all necessary denting etc. complete all as specified and directed.

M&L for repairing leakage of inner copper tank of geyser (any make), 50 litres capacity by brazing including all necessary denting etc. complete all as specified and directed.

M&L for painting old surfaces of geysers of 25/50 liters capacity of any make with one coat of paint of approved shade or tint after necessary preparation to surfaces and writing of MES Nos as approved size of letter all as specified and directed.

Renewal of inner stainless steel container of geyser (any make), 25 liters capacity by brazing including all necessary asseccories etc. complete all as specified and directed.

Renewal of inner stainless steel container of geyser (any make), 50 liters capacity by brazing including all necessary asseccories etc. complete all as specified and directed.

S&F to outer cell heavy duty suitable for 25 Ltr capacity geyser complete with 02 Nos MS adjustable all as specified and directed.

S&F to outer cell heavy duty suitable for 50 Ltr capacity geyser complete with 02 Nos MS adjustable all as specified and directed.

S&F top cover of geyser suitable for 25 Ltr cap complete with screw, washer etc all as directed and specified.

S&F (in repair) for PVC connection 15 mm die with brass ferule both end length 450 mm all as specified.

Supply only twisted flexible cord PVC insulated, 3 core, 23/0.0076 all as specified.

S&F (in repairs) of fancy type chromium plated stop cock with brass spindle & with crutch or butterfly handle screwed down high pressure suitable for 15 mm bore GI tubing all as specified and directed.

S&F Bib taps, cast copper alloy with crutch handle, screwed for 15 mm bore dia iron pipe or for brass ferrule and fixed complete all as specified.

S&F fuseable plug suitable for any type of storage water heater of any make capacity complete all as specified.

S&F (in repairs) non-return valve, gun metal, suitable for 15 mm bore GI tubing all as specified and directed.

S&F pressure releasing safety valve ISI marked all as specified and directed.

Supply and fixing plug top polycarbonate 3 pin, 16 Amp (Cat No. 38637 of Anchor or equivalent of other specified a make) all as specified and directed.

Supply, installation testing and commissioning of storage type water heater 25 ltrs capacity vertical mounting type complete made out of CRCA outer body, copper storage tank, heating element,thermostat,thermal cut out, glass wool etc. complete including making necessary electrical connections with suitable size copper multistranded cable all as directed by EIC.

S&F in repairs prepainted inspection plated rounded in two pieces made out of 22 gauge MS sheet and with fixing space for indicating lamp of any type and make of Geyser 25/50 ltrs capacity including fixing screws all as specified and directed.

Dismantling any type and capacity of geysers and re-fixing after descalling of geyser tank 25/50 Ltr capacity including geysers and element holding assembly complete all as specified.

S&F Sheet metal enclosures Single door SPN, 2 ways suitable for mounting MCB/complete all specified.

S&F MCB of the following rating and to be housed in DBs catered here in after complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are including in unit rate of each MCB of any rating) (a) SP, 6 to 32 Amps, 240 Volts (Cat No. 6032 31 to 6032 37 of legrand or equivalent of other specified make).

Taking up or down steel tubing and connections, including removal of 15 mm bore all as specified (Excavation and earthwork measured and paid separately).

Supplying, laying, jointing and testing 15 mm nominal bore steel water tubes, 'medium grade', galvanised, with all fittings, laid in trenches complete all as specified.

Refixing old steel tubing and connections in new and old position walls, ceiling, floors etc.) of following bore all as specified.

S&F GI nipple, 15 mm bore, medium grade upto 150 mm length all as specified and directed.

Taking out compressor from water cooler of any make by cutting of suction and discharge lines for carrying out necessary repairs to the water cooler base such as renewal of MS angle iron , base plate, nuts , washers, bolts,compressor rubber grooves and refixing it including N2 flashing and charging of refrigerent with with non CFC refrigerant gas matching with R-22 in required quantities and testing complete of following capacity of water

40/40 litres/Hrs

40/80 litres/Hrs

Dismantling of unserviceable compressor of any make/model from water cooler including disconnecting suction / Discharge copper tubing and supply & fixing new compressor (sealed unit) with nuts, bolts, rubbers grommet and washer, connecting copper tubing by welding flare nuts, detecting leak and repairs if any flushing and pressure testing by nitrogen & etc. vacuumising, charging with non CFC refrigerant gas of 40/40 ltrs/Hrs capacity water cooler of any make & Model complete all as directed by Engineer-in-Charge.

Ditto all as item No- above but of capacity 40/80 ltrs capacity.

Supply & fixing (in repairs) CP Brass push cock (inner or outer threaded) of 15 mm bore size complete all as directed by the Engineer-in-Charge.

Renewal of 32 mm PVC pipe with clip and strainer tee Elbow all as specified and directed by Engineer-in-Charge.

Supply & fixing (in repairs) starting relay for 40 ltrs/hr water cooler complete all as specified and directed .

Supply & fixing (in repairs) starting relay for 80 ltrs/hr water cooler complete all as specified and directed .

Supply & fixing (in repairs) running capacitor (conforming to IS:2993 - 1975) AC 240 volts in plastic container of following capacity complete all as specified and directed

Supply & fixing (in repairs) overload protector for 40/80 ltrs water cooler complete all as specified and directed .

S & F wiring loom for water cooler all as directed by Engineer-in-Charge complete all as specified and directed.

S & F Thermostat long/short tail for water cooler all as directed by Engineer-in-Charge complete all as specified and directed .

Taking out defective blower motor with blade and supply & fixing new blower motor with blade AC 240 volts, 50 HZ single phase, for water cooler 40/80 ltrs complete all as specified and directed.

Renewal of condensing coil for 40/80 ltrs water cooler of any make all as specified and directed by Engineer-in-Charge.

M&L for disconnecting of water cooler of 40/80 ltrs capacity from its position, taking out water from its water tank, cleaning of water tank by washing with washing powder and with fresh water externally and internally and spray painting with synthetic enamel paint of approved tint/colour to all painted surface of water cooler after preparation of old painted surfaces without disturbing the components & wiring etc. complete and reconnceting all as specified and directed by Engineer-in-Charge.

S&F in repairs water tray for water cooler of 40/80 ltrs made out of stainless steel complete and connecting to draining system.

Renewal of PVC inner liner of front door of following capacity of refrigerators including glass wool packing and making other petty repairs complete all as specified.

165/ 170 / 180 litres capacity

286 litres/ 300 litres / 310 litres

M&L for spray painting with two coats of synthetic enamel paint of approved tint/colour to outer surface of refrigerator of following capacity on all three outer sides after preparation of old painted surfaces and without disturbing the components & wiring etc. complete as specified and directed by Engineer-in-Charge.

165/180 litres capacity

286 /300/310 litres capacity

Checking of leakage in refrigerant system of refrigerator of following capacity by putting nitrogen pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuuming the system including charging refrigerant gas Non CFC in required quantity all as directed by Engineer-in-Charge.

165 / 170 / 180 litres capacity

286 /300 / 310 litres capacity

S&F starting relay, open type for refrigerator of capacity 165/170/180/300/310 litres all as directed by Engineer-in-Charge.

S & F over load protector for 1/6 HP refrigerator of capacity 165/300 /310 litres all as directed by Engineer-in-Charge.

S & Fin repairs thermostat defrost type for refrigerator all as directed by Engineer-in-Charge.

S & F in repairs thermostat non defrost type for refrigerator all as directed by Engineer-in-Charge.

S & F in repairs door gasket for refrigerator of following capacity , any make all as directed by Engineer-in-Charge.

165 / 170 / 180 litres capacity

286 /300 /310 litres capacity

Supply & fixing ( in repairs) vegetable basket with glass suitable for refrigerator of following capacityall as specified and directed by Engineer-in-Charge.

165 / 170 / 180 litres capacity

286 /300 / 310 litres capacity

S & F ( in repairs) Defrost tray (Plastic) as per sample for following capacity of refrigerator complete all as specified and directed

165 / 170 / 180 litres capacity

286 /300 / 310 litres capacity

S&F copper capallery for water cooler, refrigerator and deep freezer of any sizy / capacity complete all as specified and directed.

Checking of leakage in refrigerant system of deep freezer of 200 / 300 litres capacity by putting nitrogen pressure, identifying the leak, rectifying the leak/defects by brazing a. nd testing, vacuuming the system including charging refrigerant gas Non CFC in required quantity all as directed by Engineer-in-Charge.

S&F of Fan Motor of deep freezer, 230Volts rating, AC, Single Phase, 50 Hz including disconnection and reconnecting and testing complete all as specified .

Renewal of Door gasket of deep freezer of any make of following capacity 300/310 litres .

Supply and fixed in repairs of starting capacitor of 80-120 Mfd capacity in plastic /metal container all as directed.Make:Nicon

Supply and fixed in repairs of starting capacitor of 120-150 Mfd capacity in plastic /metal container all as directed.Make:Nicon

Supply and fixed in repairs of running capacitor 36 Mfd to 50 Mfd capacity in plastic container all as directed.Make:Refcom

Supply and fixed in repairs in repairs starting relay for 1.5TR/2 TR compressor all as directed.

Supply and fixed in repairs in repairs over load protector for 1.5TR/2TR compressor all as directed.

Supply and fixed in repairs Thermostate switch for 1.5TR/2TR split AC all as directed.Make:Indfoss

Supply and fixed in repairs Swing Motor for 1.5TR/2TR Indoor unit all as directed.Make:LG

Supply and fixed in repairs Swing Motor for 1.5TR/2TR window type AC all as directed.Make:LG

Supply and fixed in repairs reverse cycle solenoid valve in split/window type AC 1.5 /2 TR capacity with necessary extension to suction / discharge copper tubbing & toggle switch complete all as directed .

Supply and fixed in repairs suction copper pipe line heavy duty 1/2'' dia with puff insulation and flair nuts from indoor to outdoor unit of split AC 1.5 /2 TR capacity all as specified and directed.

Supply and fixed in repairs suction copper pipe line heavy duty 1/4'' dia with puff insulation and flair nuts from indoor to outdoor unit of split AC 1.5TR/2TR capacity all as specified and directed.

Supply and fixed in repairs copper Gas filter for AC 1.5TR/2TR capacity all as specified and directed.

Supply and fixed in repairs PVC pipe nylon imbraided 15 mm dia for condenser water drain with clamps/ concealed in wall all as specified and directed.

Dismantling of defective indoor unit of 1.5 TR capacity split type AC and supply & fixing indoor unit of the same capacity with blower motor . Front grill and connecting the copper tubing by brazing detecting leak and rectifying the same and recharging with Non CFC refrigerant gas as required the unit in wall/ ceiling mounted all as specified and directed.

Dismantling of defective condensing unit of split type AC of 1.5 TR capacity and supply & fixing new condensing unit complete with condensing coil, coil frame , wiring kit and running capacity , relay condensing motor with blade complete all as directed. Make:Carrier

Material & labour for servicing of indoor and outdoor unit by means of electric blower and water under pressure cleaning & washing of condensing coil / cooling by soap solution or recommended chemical, oiling & greasing of moving parts such as blower motor etc. complete of 1.5 TR capacity window type AC all as specified and directed.

Material & labour for servicing of indoor and outdoor unit by means of electric blower and water under pressure cleaning & washing of condensing coil / cooling by soap solution or recommended chemical, oiling & greasing of moving parts such as blower motor etc. complete of 2 TR capacity window type AC all as specified and directed.

Dismantling of burnt blower motor of 1.5 TR split AC (indoor unit) and supply & fixing blower motor of same manufacturer of AC of make of AC Carrier/Voltas /Blue star as per sample complete all as specified and directed.

Supply and charging (Top up) the AC unit of 1.5 TR/ 2 TR split type AC unit with Refrigeration Gas non CFC compatible to R-22 in required Qty complete all as specified and directed.

Supply and fixed in repairs of suction valve size 1/2" complete all as specified and directed.Make:BAP

Supply and fixed in repairs of discharge valve size 1/4'' complete all as specified and directed.Make:BAP

Supply and fixed in repairs of rubber coupling mounting for blower motor of split type AC all as per directed by EIC ( Make: - Carrier /Voltas)

Supply and fixed in repairs of air filter made out Nylon suitable for 1.5 TR split/window AC capacity air conditioners of any Make and model all as directed.

Carrying out pressure leak test of split Acs 1.5 /2.0 TR by Nitrogen gas pressure for detecting leak in cooling unit refrigerant pipe and repairing the leak by wilding or brazing of cooling unit and refrigerant pipe , putting under pressure for leak checking after repairs of leak pipe including gas charging transporting & carrying out Tools and Plant required at site all as specified and directed.

Carrying out pressure leak test of1.5 TR window AC by Nitrogen gas pressure for detecting leak in cooling unit refrigerent pipe and repairing the leak by welding or brazing of cooling unit and refrigerant pipe, putting under pressure for leak checking after repairs of leak pipe including gas charging transporting & carrying out Tools and Plant required at site all as specified and directed.

Dismantling of defective worn out wiring of indoor unit of window/split AC of capacity 1.5 TR/2TR, supply and fixing PCB ( Printed circuit Board) & Visual Eye demo plate remote hand set to suit/match the existing system all as specified and directed.Make:LG/Universal

Supply and fixing compressor reciprocating suitable for window type AC 1.5 TR (Original sealed unit is to supply) of specified/approved make including filling of refrigerant gas and testing upto entire satisfaction of Engr-in-Charge.

S&F in replacement sheet metal enclosure with metallic socket and MCB single pole 32 Amp and metallic plug top connected from mains to AC all as specified and directed .

S&F repairs metallic plug top of 16 Amps connected from mains to AC all as specified and directed. ( Make : Havells/ Legrand/ Hager).Make:Legrand

Dismantling of defective cooling coil of 1.5 TR window type AC of any make and S&F cooling coil for AC, detecting the leakage with N2 Gas , reconnecting in to the system complete all as specified and directed.

Dismantling of defective condensing coil of 1.5 TR window type AC of any make and S&F condensing coil for AC, detecting the leakage with N2 Gas, reconnecting in to the system complete all as specified and directed.

Dismantling of burnt blower motor of 1.5 TR /2 TR window AC and supply & fixing new blower motor, double shaft, 1/6 or 1/8 HP as per sample complete including making necessory electrical connection with suitable size copper conductor wire all as specified and directed.

Dismantling of burnt blower motor of 1.5 TR/ 2 TR split AC ( outdoor unit) and supply & fixing new blower motor, as per sample complete including making necessory electrical connection with suitable size cooper conductor cable all as specified and directed.Make:LG

Supply and fixed in repairs of aluminium blower / fan blade with alminium alloy bush, screw for window Acs complete as required at site complete all as directed.

Supply only PVC Knob of window type AC complete all as specified and directed.Make:- LG/ Carrier/Voltas.

Supply and fixing in repairs front grill quantity for window AC of 1.5 TR /2TR of Make National / Cosmo all as specified and directed.

Supply and fixed in repairs of PVC insulated three core stranded copper cable of size 80/20 all as specified and directed. Make:Polycab

M&L for servicing of window type AC 1.5 TR/2.0 TR capacity by means of electric blower and water under pressure cleaning & washing of condensing coil/cooling coil by soap solution or recommended chemical, coiling & greasing of moving parts such as blower motor etc complete of following capacity all as specified and directed.

Supply only refrigerant gas Non CFC equivalent to R-22 in returnable sealed cylinder all specified and directed ( Make :- Floran / Mafron) Make:Floron

Dismantling of old rusted flexi glow sign board of any description from various installations under AGE Charduar and M&L for glow sign board made out of MS angle iron box of size 7.25Mx1.20Mx0.3M fabricated with MS flat angle of size 40x40x5mm by means of cutting or welding in shape with 0.7mm thick Aluminium sheet on one side and blue acrylic sheet 2mm thick on other side in background and writing letter as directed by Engr-in-Charge such as “PUMP HOUSE/SUB STATION NO, MILITARY ENGINEER SERVICES, GARRISON ENGINEER (N) TEZPUR” with white acrylic sheet of suitable size as directed by Engr-in-Charge including 1x20 watt 4’ LED light fitting and making electrical connections with copper multistranded PVC insulated wire of nominal dia 1.5 sqmm single core and fixing/grouting it at suitable height including mounting bracket/legs fixed on the pillers of gate or as directed at site by Engr-in- Chrage and including of all welding/grouting in PCC and other materials such as angle iron/GI or MS pipe etc all as required at site and testing on completion of job.

Supply and replacement of multi stage pump single phase 230 volts 50 Hz of capacity 1.5 kW of existing model suaitbale for maximum water temperature 70 degree thermally protected for reverse osmosis plant of one hundred fifty litre per hour including making all electrical and water supply connections and testing on full load and dismantling of old/unsv pump all as specified and directed

Supply and replacement of DOL starter suitable for three phase 2 HP motor of air compressor including making all electrical connections and testing on full load and dismantling of old/unsv starter of any make/type all as specified and directed

Collection of unserviceable voltage stabilizers of any make of following capacity from AGE store yard & transporting it to local workshop of the contractor, dismantling the stabilizer for repairs of the defective parts/ spares & reassembling including repair of defective screws, rubber shoes, testing & painting with two coats of synthetic enamelled paint after removing old paint and repairs body etc. depositing back to MES stores yard all as directed by EIC. (Note :- Spares/ parts renewed shall be paid for separately under respective items at appropriate rates).

Supply only relay 25/30 Amps 24 Volts for 4 KVA/5KVA voltage Stabilizer all as specified and directed. (Make :- Dunmag, Eaglemen, Powerman)

Supply only Relay for 1KVA/2 KVA voltage Stabilizers all as specified and directed. (Make :- Dunmag, Eaglemen, Powerman)

Supply and fixing connector for IN-Out supply of voltage stabilizer 32 Amps with earth connection all as specified and directed.

Supply and fixing porcelain cutout of same size capacity as existing of 16 Amp each connection all as specified and directed.

Supply and fixing porcelain cutout (Kit-Kats) 32 Amps/240 volts all as specified and directed.

Supply and fixing indication lamp in voltage stabilizers of any capacity all as specified and directed.

S&F (in repair) 2 Meter long conductor cable 3 core PVC insulated and sheathed 80/0.20 (2.5 sqmm) size duly fitted with 3 pin top, 20 Amps (Cat No. 386337 of Anchor or any equivalent specified make all as specified.

S&F AC volts meter, square/round type, 0-300 volts suitable for 2KVA / 4 KVA / 5 KVA single phase stabilizer complete all as specified.

S&F (in repair) power transformer suitable for Voltage stabilizer of make Blue Bird/ Vinitec / Servel suitable for following capacity duly winded with suitable size super enamelled copper wire and testing complete all as specified and directed.

4 KVA / 5 KVA

Supply and fixing Main PCB with high & low voltage cut off suitable for voltage stabilizers of any make all as specified and directed for following capacity:-

4 KVA / 5 KVA

Rewinding of main power transformer of following capacity Voltage stabilizer, with suitable size of supper enamelled copper wire and fixing & testing complete all as specified and directed.

4 KVA / 5 KVA

SRI JAINATH SINGH