Construction of Booking office at Santacruz, Vileparle(w) & Naigaon

A-All DSR-23 Items (For Civil portion only) 19898055.27 Below/P

B-All USSOR-21 Items (For Civil portion only) 55093.68 Below/P

C-All NS Items ( For Civil portion only) 4983671.22 Below/P

Item Breakup - A-All DSR-23 Items (For Civil portion only)

Item Breakup - B-All USSOR-21 Items (For Civil portion only)

Ordinary Portland Cement approved brands/makes Total 55093.68

Item Breakup - C-All NS Items ( For Civil portion only)

Providing waterproofing treatment with china Sqm mosaic on terrace slab as per under in addition to specification enclosed along with tender documents. Preparing the surface for water proofing treatment by scrapping &brushing the surface so as to remove all loose materials after removing old tarfelt bitumen fiber glass tissues etc. complete washing of the surface with water. Only dismantling of concrete if any will be paid separately under DSR item. Providing cement concrete to proper slopes as directed by the Railway Engineer or his representative however cost of providing cement concrete will be paid separately under USSOR items. Applying one coat of polymer based waterproofing compound of approved quality like SBR/ similar mixed with cement (OPC). 1Kg. Of polymer based water proofing compound & 2Kg. Of cement (OPC) should cover an area of 2.80 sqm. Providing & laying broken china mosaic (broken pieces of china glazed tiles) of approved colour set 20 mm thick cement mortar 1:3 mixed with water proofing powder of approved quality to correct level & slope and joints finished by pouring cement slurry brooming them down. The tiles shall be closely packed such that china mosaic covers at least 90% slab area. The above treatment shall be provided on the parapets/ any other wall up to 30cm. Above the floor level and the junction between the wall & the parapet round off shape of arc or curve. Curing of flooring continuously for 10 days so as to render the surface hard. Cleaning the china mosaic tiles of all dust & strains. The rate shall also exclude cost of cement, which will be paid for separately but shall include disposal of debris released from this work. Total 110160.00 Item- 2 Rubble soling S No. Item No Description of Item Unit Qty Rate Amount

Uncoursed FILLING (in work like rubble filling behind abutments etc.)without any special dressing of stones. Total 3793.26 Item- 3 Aluminum louvers MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY S No. Item No Description of Item Unit Qty Rate Amount

Supplying ,cutting and fixing adjustable Sqm aluminium louvers of 100 mm blade with suitable handle and fixing 4 mm thick glass sheets in louvers blades of approved quality with five joints etc. complete( Payment will be made in sqm i.e. area of clear opening shall be measured correct to two places of decimal) Total 2862.00 Item- 4 Trac metal false ceiling S No. Item No Description of Item Unit Qty Rate Amount

Supplying & installation of TRAC METAL Sqm 600mm x 600mm Steel COIL COATED TILE TYPE FALSE CEILING as per following specifications: (a) STEEL TILES : Steel tiles shall be of 600mm x 600mm size manufactured out of 0.5mm TCT coll coated galvanized steel (base steel as per JIS 3312) produced on advanced equipment which would include several leveling stages. All the tiles will have square/beveled edges. For clip in tile, two sides of each tile will be raised and piped and stopped to ensure positive engagement into the spring tee yet allowing dismounting of individual tiles. SUSPENSION (CLIP IN SYSTEM) Tiles shall be suspended by means of a suspension system consisting of 0.5mm galvanized steel clips in proper profiles installed at correct spacing to support the tiles. Suspension profiles shall be suspended from roof structure by galvanized iron ceiling brackets and aluminum hold on clamps at maximum 1200mm centre to centre along the clip in profile. (b) WALL ANGLES: The ceiling shall be trimmed along the wall perimeter by means of 19mm x 19mm coated steel perimeter angles. (c) PAINT FINISH : Steel tiles would be store finished on exposed side with 20 microns polyester coil coating over primer in approved shade and backing coat on the rear surface (Nominal 5 microns). Tiles would alternatively finished with 50 microns epoxy polyester powder paint in approved shade on exposed surface. Rate includes all labour, material, tools & plants etc. complete and shall also include for making provision in ceiling for tube lights. Total 358128.00 Supplying and fixing counters/cupboards made of marine ply of kit ply gold or Gujran ply or similar conforming to IS 710 as per following description. The top shall be supported by vertical supports of marine ply and fixed to wall without any gap. Drawers for wooden knobs, locking arrangements and sliding arrangements consisting of PVC sliding rollers on aluminium angles shall be provided as per approved drawings. Shelves as per approved drawings below the working platform with horizontal Item- 5 and vertical dividers, shutters of marine ply with brass hinges, wooden knobs and locking arrangements with brass locks shall be provided. Cost of providing veneer, polishing and CT wood work involved will be paid separately. Payment will be made for actual area of marine ply and used in the work as per following items and no extra payment will be made for fittings, sliding arrangements etc. S No. Item No Description of Item Unit Qty Rate Amount

a) 19 mm marine ply conforming to IS 710

b) 12 mm marine ply conforming to IS 710

c) 6 mm marine ply conforming to IS 710 Total 142455.00 Item- 6 Supply and fixing 12 mm thick Toughened Etched glass S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply and fixing 12 mm thick Toughened Sqm Etched glass with all edge Machine polished. The rate shall include cost of all materials , labour, tools & plants and with all lead, lift, transportation, taxes etc. Complete Total 108108.00 Item- 7 Roller blinds S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing roller blinds. The rate Sqm including all contractor's labour, tools and plants etc. Total 179247.60 Item- 8 Three tracked colour anodised sliding window S No. Item No Description of Item Unit Qty Rate Amount

Supplying & fixing THREE TRACKED COLOUR Sqm ANODISED SLIDING WINDOW as per following description:- (a)The outer frame shall be colour anodised aluminum tube section of size 100mm x 37.5mm x 16 gauge of Jindal or similar make. (b) Three tracks channel for sliding of shutters ( ie., Track bottom at sill and track top for sides and top) shall be provided of colour anodised aluminum channels of size 100mm x 31.75 mm x 16 guage. (c) The window shutters shall be colour anodised aluminum section of size 40mm x 18mm x 16 guage with interlocking arrangements & concealed lock. 2 nos best quality bearings shall be provided in each shutter. (d) The glass panels of the shutter shall be of smoke glass 5mm thick provided with PVC liners on top, bottom & sides. All aluminum sections shall be colour anodised of approved colour and window shall be fixed to the masonry by drilling holes, wooden plugs and screws. Rate is inclusive all materials, labour, tools & plants, consumables etc.. Complete. Total 72230.40 Item- 9 Aluminum grill 10 mm thick S No. Item No Description of Item Unit Qty Rate Amount

Supplying and cutting, fixing Aluminium grill Sqm of 10 mm thick. Decagrille design No. DG.201with Al. section DG-6 around the grills including necessary screws at suitable intervals as directed by the Engineer-in charge at site with necessary drillings to black cudappa stone slab/wall etc. complete. Rate shall be quoted including all labours, materials, tools& plants etc. complete with removing the old BRC fabric & depositing the same in CIOW's godown. Note:- (1) All aluminum grills, Al. section & screws should be silver anodized with 15 micron.(2) The material to be used should be best quality and shall be got approved by the Engineer in charge of works. (3) Touching up to the connecting wall work with same colour, enamel paint etc. complete. Total 37704.96 Item- 10 20 mm to 25mm thick roofit plaster S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Providing and applying 20 to 25mm thick Sqm water resistance premixed/ready mixed plaster of thick render's of Roofit Industries Ltd. or similar. The specifications of the premixed plaster shall be as under. 1.Colour- Gray 2. Binder- 43 Grade portland cement. 3.Fillet- Graded sand conforming to BS 1199. 4.Additv- Water soluble polymers to improve work ability, water retention, durability and adhesion strength. 5.Composition- 43 grade Portland cement - 25-30% graded sand - 75- 70% (including quartz and additives). 6.Max. aggregate- Size 4.5mm 7.Density- 1.80kg/Litre in dry and 1.90kg/litre in wet condition. 8.Pot lift- One hour. 9.Consumption- 1.7kg per sqm per mm thickness. 10.Water demand- About 15% of 6 litres per 40kg. 11.Date of pack- Not/more than 6 months. NOTE: The ready mix plaster in bags shall be first supplied to the SSE(W) in his godown & then drawn from his godown from time to time. The material should be got approved by the Contractor from the Railway Engineer before use on work. Transportation to site has to be done at contractor's cost and payment will be made for area of work done and not for any bags supplied. The rate is inclusive of scaffolding. Total 102375.00 Item- 11 8 mm to 15 mm thick roofit plaster S No. Item No Description of Item Unit Qty Rate Amount

Providing and applying 8 to 15mm thick Sqm water resistance premixed/ready mixed roofit mix internal plaster of thick render's of Roofit Industries Ltd. or similar. The specifications of the premixed internal plaster shall be as under. 1.Colour- Gray 2. Binder- Ordinary Portland cement. 3.Fillet- Graded sand conforming to BS 1199. 4.Additives- Water soluble additives to to improve workability, water retention, durability and adhesion strength. 5.Water Demand: For hand application: Approx14- 16% or 7-8L/50Kg bag. 6.Max Aggregate- Size 2.60 mm 7.Pot lift- Approx. One hour. 8.Composition- 2.30Kg per sqm per mm thickness. 9.Particle consumption; Approx

10.Adhesion to concrete: > 0.75N/mm2 (1.0N/mm2) 11.Compressive strength:> 10 N/ mm2 12.Chloride content:<0.01% 13.Date of pack- Not/more than 6 months. NOTE: The ready mix plaster in bags shall be first supplied to the IOW in his godown & then drawn from his godown from time to time. The material should be got approved by the Contractor from the Railway Engineer before use on work. Transportation to site has to be done at contractor's cost and payment will be made for area of work done and not for any bags supplied. Total 207807.00 Item- 12 Tactile tile 300mmx300mmx25 mm S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Providing and laying tactile tile (for vision Sqm impaired persons as per standards) of size 300x300x25mm approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. Total 3658800.00

Item Breakup - D-All Electrical NS Item

Supply of material and providing light/fan Numbers 300.00 point concealed wiring, with single core multi-strand copper wire, PVC insulated unsheathed, LSHF / ZHFR, of size 1.5 sq.mm. for phase, neutral & earth wire and modular switches, complete with all accessories, junction box, ceiling rose etc, as per specifications in Annexure I. Total 154500.00 Item- 2 Supply of material and providing main/ submain concealed wiring S No. Item No Description of Item Unit Qty Rate Amount

Supply of material and providing main/ Running submain concealed wiring with single core Metre multi-strand copper wires, PVC insulated unsheathed, LSHF / ZHFR, of size 2.5 sq.mm., with set of 3 wires for phase, neutral & earth wire, as per specifications in Annexure II. Total 81000.00 Item- 3 Supply of material and providing main/ submain concealed wiring S No. Item No Description of Item Unit Qty Rate Amount

Supply of material and providing main/ Running 1050.00 submain concealed wiring with single core Metre multi-strand copper wires, PVC insulated unsheathed, LSHF / ZHFR, of size 4.0 sq.mm., with set of 3 wires for phase, neutral & earth wire, as per specifications in Annexure II. Total 159600.00 Item- 4 Supply and fixing of modular concealed/ surface mounting box of four S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of modular concealed/ Numbers surface mounting box of four module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. Total 1404.00 Item- 5 Supply and fixing of modular concealed/ surface mounting box of six S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of modular concealed/ Numbers surface mounting box of six module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. Total 1530.00 Item- 6 Supply and fixing of modular concealed/ surface mounting box of eight S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply and fixing of modular concealed/ Numbers surface mounting box of eight module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. Total 2968.00 Item- 7 Supply and fixing of modular concealed/ surface mounting box of S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of modular concealed/ Numbers surface mounting box of twelve module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. Total 2916.00 Item- 8 Supply and fixing of modular concealed/ surface mounting box of S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of modular concealed/ Numbers surface mounting box of sixteen module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. Total 3900.00 Item- 9 Supply, fixing, testing & commissioning of modular socket 3 pin of 6A S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers 150.00 modular socket 3 pin of 6A capacity with 10A one way modular switch, as per specifications in Annexure IV. Total 25800.00 Item- 10 Supply, fixing, testing & commissioning of modular power socket 3 pin S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers modular power socket 3 pin twin heavy duty of 6/16 A capacity with 20A one way modular switch having neon indicator, as per specifications in Annexure V. Total 14160.00 Item- 11 Supply, fixing, testing & commissioning of MCB DB single phase with S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers MCB DB single phase with RCBO, m.s. enclosure, I/C-DP RCBO of 40Amp - 1No, O/G: SP MCB of 6A-32A - 8Nos, as per specifications in Annexure VI. Total 47358.00 Item- 12 Supply, fixing, testing & commissioning of MCB DB three phase with S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers MCB DB three phase with RCBO, in m.s. enclosure, out door type, I/C-FP RCBO of 63Amp - 1No and O/G: SP MCB of 10-32 Amp - 12Nos, as per specifications in Annexure VII. Total 49476.00 Item- 13 Supply of energy efficient BEE 5 star rated BLDC ceiling fan 1200mm S No. Item No Description of Item Unit Qty Rate Amount

Supply of energy efficient BEE 5 star rated Numbers BLDC ceiling fan 1200mm (48") sweep, with down rod, and standard accessories, fan & regulator shall be compatible to work with various makes & models, as per specifications in Annexure VIII. (Minimum Warrantee - 2 years) MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Total 130500.00 Item- 14 Fixing & commissioning of ceiling fan on existing M.S. hook: S No. Item No Description of Item Unit Qty Rate Amount

"Fixing & commissioning of ceiling fan on Numbers existing M.S. hook: 1. The fan shall be installed complete with accessories & safety device e.g down rod, blades, canopies, rubber insulator, split pin & nut bolt with spring washers. If required size and length of down rod is different than original OEM make, then down rod will be supplied by the Railway. 2. The fan shall be connected with the supply point (within 3 mtr distance) using PVC insulated & sheathed copper wire 03 core 1.5mm2 size, LSHF / ZHFR, conforming to IS 694/2010 or latest and ISI marked, in PVC pipe or as per site conditions, with proper workmanship. (The ceiling fans will be supplied by Railways, transportation to site will be done by the firm from Mumbai central)." Total 3120.00 Item- 15 Supply, fixing, testing & commissioning of 5 step fan regulator S No. Item No Description of Item Unit Qty Rate Amount

"Supply, fixing, testing & commissioning of 5 Numbers step fan regulator electronic modular stepped type, compatible to work with various makes & models of BLDC ceiling fans: 1. Ceiling fan's electronic modular stepped type regulator shall be of minimum 100 watts capacity suitable to work on 230 volts single phase AC supply. 2. Regulator should be compatible to work with various makes & models of BLDC ceiling fans. 3. Stepped regulator shall be fixed on modular board & connected with ceiling fan's piano controlling switch, shall be suitable for flush mounting on switch board, necessary internal wiring is included in the scope of work." Total 18000.00 Item- 16 Supply and fixing of ceiling fan down rod, heavy duty, white colour, S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of ceiling fan down rod, Numbers heavy duty, white colour, rod size 2 feet length, 19 mm dia., 1.4 mm thickness, made of CRC Cold Rolled Coil or Cold Rolled Steel material. Total 8280.00 Item- 17 Supply, fixing, testing & commissioning of super energy efficient BLDC S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers super energy efficient BLDC motor industrial exhaust fan of size 300mm (12") sweep and standard accessories, as per specifications in Annexure IX. (Minimum Warrantee - 2 years) Total 66696.00 Item- 18 Supply, fixing, testing & commissioning of wall bracket fan of size S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

"Supply, fixing, testing & commissioning of Numbers wall bracket fan of size 16"/400mm sweep and 1350 rpm with BLDC motor : The bracket fan shall be of plastic material, oscillating type with 03 blades, air delivery 75 Cu.Mtr./ Min., suitable to work on 230 volts, 50 HZ AC supply, power consumption 35W max.. The fan shall be fixed on the wall with proper fixing arrangement/ suitable size fasteners arrangement / M.S. bracket rag bolts of suitable size to withstand the weight and thrust." Total 67356.00 Item- 19 Supply and providing Pedestal fan size 16"/400mm sweep, BLDC motor S No. Item No Description of Item Unit Qty Rate Amount

Supply and providing Pedestal fan size Numbers 16"/400mm sweep, BLDC motor, with regulator. The pedestal fan shall be of plastic material, 16"/400mm sweep, 1350 rpm (min.), Minimum air delivery 75 Cu.Mtr./Min., complete with BLDC motor & regulator; power consumption 35W max, adjustable pedestal 03 blades, Fan Body & blade material - Rust Proof Polypropylene, and PVC copper flexible cable of adequate size, suitable to work on 230V 50 HZ single phase AC supply. Total 81162.00 Item- 20 Supply, fixing, testing & commissioning of indoor type LED luminaires S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers indoor type LED luminaires 20W (maximum, including driver), 4 ft long, System efficacy greater than or equal to 110 lm/W, Lumen Output greater than or equal to 2000 lumens, Colour consistency CRI greater than or equal to 80, Driver Surge protection greater than or equal to 2.5KV. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site). Luminaires complete with all accessories and other specifications as per Annexure X. (Minimum Warrantee - 5 years) Total 15750.00 Item- 21 Supply, fixing, testing & commissioning of indoor type LED luminaires S No. Item No Description of Item Unit Qty Rate Amount

"Supply, fixing, testing & commissioning of Numbers 150.00 indoor type LED luminaires 20-25W (24W), 8""x 8"" size, recess mounting type, System efficacy greater than or equal to 100 lm/W, Lumen Output greater than or equal to 2400 lumens, Colour consistency CRI greater than or equal to 80, Driver Surge protection greater than or equal to 2.5KV. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site. Luminaires complete with all accessories and other specifications as per Annexure X. " Total 207300.00 Item- 22 Survey, design, manufacture, display of wall / hanging / floor S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Survey, design, manufacture, display of wall / Square hanging / floor mounting type LED Foot illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 Micrometer thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. The unit rate in the schedule is for single sided board. In case of double sided boards, the quantity will be counted as 1.3 times of the schedule quantity. Details as per specifications in Annexure XI. Total 327600.00 Item- 23 Erection and installation of wall / hanging / floor mounting type LED S No. Item No Description of Item Unit Qty Rate Amount

Erection and installation of wall / hanging / Square floor mounting type LED illuminated sign / Foot direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 Micrometer thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. The unit rate in the schedule is for single sided board. In case of double sided boards, the quantity will be counted as 1.3 times of the schedule quantity. Details as per corresponding specifications in Annexure XI. Total 32550.00 Item- 24 Supply, fixing, testing and commissioning of 125A, 4 pole electronic S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply, fixing, testing and commissioning of Numbers 125A, 4 pole electronic / microprocessor based MCCB, with inbuilt earth fault protection along with earth leakage protection having shunt coil, earth leakage relay 30mA -30A CBCT etc., in sheet steel enclosure, as per specifications in Annexure XIV. Total 326268.00 Item- 25 Provision of new fire extinguishers, 6 KG DCP type S No. Item No Description of Item Unit Qty Rate Amount

Provision of new fire extinguishers, 6 KG DCP Numbers type, as per specifications in Annexure XII. Total 4497.00 Item- 26 Provision of new fire extinguishers, 4.5 KG CO2 type S No. Item No Description of Item Unit Qty Rate Amount

Provision of new fire extinguishers, 4.5 KG Numbers CO2 type, as per specifications in Annexure XIII. Total 8649.00 Item- 27 Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade S No. Item No Description of Item Unit Qty Rate Amount

Supply of XLPE insulated, PVC sheathed, Metre armoured 1.1 KV grade, multi-stranded aluminum conductor cable of size 50 sq.mm.x 4 core, as per specifications in Annexure XV. Total 399000.00 Item- 28 Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade S No. Item No Description of Item Unit Qty Rate Amount

Supply of XLPE insulated, PVC sheathed, Metre armoured 1.1 KV grade, multi-stranded copper conductor cable of size 10 mm² x 4 core, as per specifications in Annexure XV. Total 261500.00 Item- 29 Supply, fixing, testing & commissioning of cable jointing kit for S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers cable jointing kit for aluminium conductor XLPE insulated PVC sheathed, armoured cable of size 50 sq.mm. 4 core, as per specifications in Annexure XVI. Total 72189.00 Item- 30 Supply, fixing, testing & commissioning of aluminium lugs of size 50 S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers 240.00 aluminium lugs of size 50 sq.mm. for cable termination, as per specifications in Annexure XVII. Total 3840.00 Item- 31 Supply, fixing, testing & commissioning of heavy duty copper lugs of S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers heavy duty copper lugs of size 10 sq.mm. for cable termination, as per specifications in Annexure XVIII. Total 312.00 Item- 32 Supply of material & saddling to the cables with GI saddles: S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

"Supply of material & saddling to the cables Metre with GI saddles: 1. The cable shall be fixed on walls/structures with G.I. saddle thickness of 1.2mm and G.I. base and suitable for the size of cables, minimum two saddles per meter shall be used while saddling the cable. 2. Galvanized base shall be provided below the cable and the base shall be fixed firmly first with M.S. fasteners of required size / standard quality counter sunk headed self- threading G.I. screw. Same shall be used for saddles also." Total 24048.00 Item- 33 Supply of material, fabrication of clamps of size minimum 25x3 mm & S No. Item No Description of Item Unit Qty Rate Amount

"Supply of material, fabrication of clamps of Metre size minimum 25x3 mm & GI screw of size minimum 2 inch, and clamping of cables : 1.The cable shall be clamped on wall / structure of station building or any service building with G.I. clamps made out by G.I. flat of 25mm x 3mm size minimum and GI screw of size minimum 2 inch, at every one meter distance. 2.The clamp shall be suitably shaped as per site requirement. The clamp shall be fabricated after the site survey by the contractor, as per actual size/ load requirement. GI flat spacers shall be of minimum 3 mm thick. 3.All the cables shall be clamped individually. 4.The clamp shall be fixed with suitable galvanized nut bolts/ fasteners with washers / standard quality counter sunk headed self-threading G.I. screws. " Total 118500.00 Item- 34 Supply of material & installation of maintenance free earth electrode S No. Item No Description of Item Unit Qty Rate Amount

Supply of material & installation of Numbers maintenance free earth electrode of length 3 meter, including earth enhancement material for earthing for each electrode & other accessories as per Drg. No. SDO/ RDSO/ E&B/001 and RDSO Spec No. RDSO/SPN/197 /2008, as per Annexure XIX. Total 65394.00 Item- 35 Supply, fixing, testing & commissioning of G.I. strip 25mm x 6mm for S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Metre G.I. strip 25mm x 6mm for earthing, including cutting, bending, welding, excavation etc., as per specifications in Annexure XX. Total 9540.00 Item- 36 Supply and fixing G.I. strip hot dip galvanized of size 50mm x 6mm for S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing G.I. strip hot dip galvanized Numbers of size 50mm x 6mm for main earthing terminal MET with total length including all bends etc. minimum 2 ft.. Scope also includes cutting, bending, welding, excavation etc. Specifications in Annexure XXI. Total 5064.00 Item- 37 Supply, laying, testing, fixing and commissioning of PVC insulated & S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply, commissioning of PVC insulated & PVC sheathed, multi-stranded, 1.1 KV grade, copper conductor cable of size 16 sq.mm. single core FRLS, in flexible / rigid PVC conduit, complete with clamping of the cables, and lugs at each connection, as per specifications in Annexure XXII. Total 58800.00 Item- 38 Supply & fixing of PVC casing & capping of size 100mm x 100mm with S No. Item No Description of Item Unit Qty Rate Amount

Supply & fixing of PVC casing & capping of Metre size 100mm x 100mm with all accessories for covering of cables/ wires etc., as per specifications in Annexure XXIII. Total 602615.00 Item- 39 Supply of aluminum ladder of size 6 feet height (when open), double S No. Item No Description of Item Unit Qty Rate Amount

Supply of aluminum ladder of size 6 feet Numbers height (when open), double sided, made from aluminum section of minimum size - 66 x 31 x 3.15 mm thickness, 5 steps of 1 ft. width min., two way climbing, Top platform min. size 10" x 14", complete with anti-skid solid rubber at bottom, as per specifications in Annexure XXIV. Total 35589.00 Item- 40 Supply of aluminum folding ladder of size 10 feet height (when open), S No. Item No Description of Item Unit Qty Rate Amount

Supply of aluminum folding ladder of size 10 Numbers feet height (when open), double sided, made from aluminum section of minimum size - 66 x 31 x 3.15 mm thickness, 9 steps of 1 ft. width min., two way climbing, Top platform min. size 12" x 16", complete with anti-skid solid rubber at bottom, as per specifications in Annexure XXV. Total 60567.00 Item- 41 Supply of hammer type drill machine, heavy duty, 230V, 50Hzs, S No. Item No Description of Item Unit Qty Rate Amount

Supply of hammer type drill machine, heavy Numbers duty, 230V, 50Hzs, complete with auxiliary handle, accessory set, Accepted make - Bosch GBH 220 SDS Plus Professional Rotary Hammer or similar of Stanley / Dewalt / Hitachi Rotary Hammer Drill. Total 23274.00 Item- 42 Supply of Digital Earth resistance meter with Testing Kit. Display : 3½ S No. Item No Description of Item Unit Qty Rate Amount

Supply of Digital Earth resistance meter with Numbers Testing Kit. Display : 3½ or 4 Digit LCD display, Data hold facility, Ground resistance measurements from 0 ohm 01 to 2000 ohm, Power Source - Battery Powered, Maximum Operating Voltage - 30V, Measurement Type - Ohmmeter. KM 2030 model of Kusum MECO make or similar of FLUKE, RISHABH, MEGGER, MITRAVI. Total 35403.00 Item- 43 Supply of Digital Clamp Meter with following specifications: 3 ½ S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply of Digital Clamp Meter with folllowing Numbers specifications: 3 ½ digits, LCD display, 2000 counts with automatic sign & function, 5 functions, Battery check function, Low battery indication, Overload protection, Audible continuity, Average Sensing, Over Range Indication, Diode Test, AC Current- 0.01 Amp, AC Voltage- 0.1V -750V DC Voltage- 1.0MV-1000V, Resistance- 0.1 Ohms-2000K Ohms, Power supply- Single standard 9V Battery. Make- KUSUM-MECO KM 2700, FLUKE 362, RISHABH RISH 1000 AAC, MEGGER-DCM-310/EN, MITRAVI-DT- 4250. Total 13401.00