Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.2 LAccepted-AOC | L1 | Accepted-AOC L1, being lowest | |
| 2 | L2₹40.3 L+₹1.1 L (2.77%)Rejected-Finance FLAT NO 1 GURUKRUPA APARTMENT BEHIND TELEPHONE EXCHANGE DEHUROAD PUNE | PUNE | PUNE | MAHARASHTRA | 412101 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹41.2 L+₹2.0 L (5.16%)Rejected-Finance 27 ABUSETH ROAD DEHU ROAD PUNE 412 101 | NA | NA | 412101 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹41.6 L+₹2.4 L (6.15%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹42.8 L+₹3.5 L (9.05%)Rejected-Finance PR CDA SC PUNE 01 THROUGH AO GE DEHU ROAD | L5 | Rejected-Finance Not being lowest |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
30 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE dehu road
GE dehu road Pune
SPECIAL REPAIR TO EXPLOSIVE STORE HOUSE NO 112 AT NO 2 AMUNITION AREA OF 29 FAD, PROVISION OF BATHROOM AND TOILET FACILITIES FOR GD ROOM NEAR SANT TU-KARAM GATE, PROVISION OF GUARD REST ROOM NEAR SANT TUKARAM GATE, PROVN OF SANTRY (RP) POST INFRONT O
2024_MES_669960_1
8907
Open Tender
Civil Works
Item Rate
270 days
GE dehu road
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE dehu road
₹97,000
29 Nov 2024
2 Sept 2024
2 Oct 2024
2 Sept 2024
30 Sept 2024
16 Sept 2024
Amount
Demolition of brick/stone masonry built in cement mortar all as specified.
M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6 mtr mean radious and built in cm 1:6.
M & L 15 mm thick cement plaster on brick wall in cement morat 1:4 and plastered surfaces shall be even and smooth without using extra cement complete.
M & L 15 mm thick cement plaster on brick wall in cement morat 1:6 and plastered surfaces shall be even and smooth without using extra cement complete.
M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls. complete all as specified and directed.
M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls.
Demolition of cement concrete (unreinforced) of any description and in any position not ohterwise specifically provided for .complete all as sspecified.
M&L for PCC type B1(1:2:4, using 20mm graded stone aggregate) as in bed blocks/coping/ edging all as specified and directed.
M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone agg.) as in plinth protection 75 mm thick finished top surface even and smooth with out using extra cement
M & L for Preparation of Old previously plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete.
M&L for preparation of surfaces of Old plaster surface of wall and applying two coat of cement base paint complete all as specified and directed.
M & L for Preparing old decorated plastered or unplastered surfaces of ceiling including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash in ceiling complete all as specified.
M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base for hard standing complete all as specified and directed.
M&L for cement conceret 1:3:6 Type C-2 Using 40 mm graded stone aggregate as in surface channel and drain bed.
Extra for forming fair finished drain or channel 30 cm inner girth or more in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
M&L for Hard core, broken to gauge n exc 63 mm complete all as specified and directed.
M & L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less completed all as specified
Finishing surface of concrete roads, pavements etc by belting/brooming complete all as specified and directed.
M & L for forming 12 mm thick expansion joints 150 mm deep, filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound grade 'A' complete all as specified and directed.
M & L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed.
M & L for Rendering 10 mm thick in cement mortar 1:4 using water proofing compound @ 3% of weight of cement on RCC roof slab, finished even & smooth without using extra cement as directed by Engineer-in-charge
M & L for taking out old water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge (a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer. (b) On the dried roof surface, apply one coat of bituminous primer @ 100 Gm/ Sqm as per manufacturers instruction. (c) On this primed surface, the approved APP modified bituminous membrane with non woven polyester mat asreinforcement weighing not less than 3.5 Kg/ Sqm laid by torch application metho and top surface shall be applied with bituminous aluminium paint. (d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction. Note:-Obtain material through out low laying Area
Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed.
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil.
M & L for Cement concrete type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete.
M&L for Precast cement concrete block masonry 1:3:6 type C1 with solid block exc 10cm in width and setting in cement morter 1:6 complete all as specified and ditected by Engr-in-Charge.
M&L for Pre-cast cement concrete solid block masonry in PCC 1:3:6 type C-1 in wall 10 cm thick and setting in CM 1:4 complete all as specified and directed.
M & L for 40 mm thick Cement Concrete M-15 Nominal Mix (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - water proofing compound will be measured and paid separately.
Supply only Integral water proofing compound (WPC)
M&L for 75mm thick P.C.C 1:4:8 type D-2 in sub base of floor complete all as specified and directed by Engr-in-Charge.
M & L for 25 mm thick PCC 1:2:4 type B1, 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface with out using extra cement.
M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed by Engr-in-charge.
M & L for Glazed ceramic coloured tiles of size 300 mm X 450 mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. over 10mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.
Returning filling in including speading,leveling ,watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed by Engr-in-Charge.
Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point.
M&L for 50 mm thick PCC 1:3:6 type C2 in plinth protection finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge..
M & L for Reinforce cement concrete Type B1 1:2:4 (20 mm graded aggregate) Beams, cantilevers, bressumm ers, lintels over 1.5m spcomplete all as specified and directed.
M & L for Reinforce cement concrete Type B1 1:2:4 (20 mm graded aggregate) in chajja spcomplete all as specified and directed.
M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.
Formwork to chullah hoods, chajjas, troughs and similar items in?cluding edges
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing
S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.
S & F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr In Charge.
All as per item No. 46 above but fix in valley gutter / ridge
Material & labour for two coats of synthetic enamelled paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of surfaces.complete all as specified and directed by Engr In Charge.
S&F Rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A)
S&F 1000 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position all as specified.
S & F hume pipe septic tank 50 users capacity including all excavation earth work required including vent pipe, cowl, rcc covers, plasters and connecting the new septic tank to the incoming sewer lines and connected to soak pit directed.
M&L for reinforced cement concrete pipes class NP-3 , laid in trenches & jointed complete with collars, dia of pipe 150 mm .
M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 150 mm bore RCC pipe.
S&F 15 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge.
S&F 15mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge..
S&F 20mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge..
S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete
S & F for Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.
S & F PVC valveless, syphonic action type, 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, CP down pipe and connecting to the WC and making good to the floor with PCC including waste pipe all as specified and directed.
S&F bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge.
S & F Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms
S&F 15mm dia stop valves , fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed by Engr In Charge.
Supply & fixing 15mm pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm complete all as specified and directed by Engr In Charge..
S&F for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms)
S&F PVC connections 15mm size with PTMT nuts of length 600mm
S&F C P floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)..
M & L for Gully traps salt glazed stoneware (SGSW) square or round mouthed type 'P' of size 180x100mm for drain pipes complete all as specified and directed.
S&F in repair CP jet spray with one mtr flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge
S&F in repair health Faucets with flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge
M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.
S & F 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors
S & F 75 mm dia bore PVC (SWR) bends any radius
S & F 110 mm dia bore PVC (SWR) bends any radius
S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal
S & F PVC (SWR) 110 mm bore vent cowl
M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 100 mm bore RCC pipe.
S&F soap dish vitreous china white, approximate size 160x160x90mm embedded in the wall.
S & F steel window double leaf double shutter (gauge shutter will open inside and glaze shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauge bars of FI 10x 3mm thick dovetailed or welded .All as specified.
S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match.
All as per item No 81 above but on skirtings incl 10 mm th rendering in CM (1:4) complete.
S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling all as specified
M&L 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid comlplete as specified
S & F hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long complete all as specied and as directed.
S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.
S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.
S & F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides
S & F of 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed.
S & F of 100 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.
S&F 100 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.
S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.
S & F for 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate complete
S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.
Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean redious built in CM 1:4
M&L for 10 mm thick rendering in cement mortar 1:6 on concrete block masonry finishing even and smooth without using extra cement .complete all as specified and as directed by engr-in-charge.
Material & labour for preparation of new surfaces and & applying three coat of white wash complete all as specified and directed by Engr-in-charge.
M & L for providing reinforced cement concrete 1:2:4 Nominal Mix using 20 mm graded stone aggregate as Slabs supported on walls, beams and columns in floors,roofs complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M&L for TMT bar 6mm to 8mm dia as in stirrups cut to length bend to shape required and binding with mild steel wire annealed not less than 0.9mm dia. complete all as specified and as directed by engr-in-charge.
M&L for 40 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone agg in floor finishes.complete all as specified and as directed by engr-in-charge.
M& L Chequared Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.
Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc and getting out in soft/loose soil (BC) all as specified and directed.
Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc and getting out in hard disintegrated soil all as specified and directed.
Excavation in post holes (or similar hole) each n. exc. 0.5 cum, getting out, returning filling and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm watering and removing surplus soil to a distance n. exc. 50cm and making good surface in hard and dense soil complete all as specified and directed by Engineer-in-Charge
M & L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post complete all as specified and directed by Engineer-in-Charge
M&L for providing RCC Nominal Mix Type B0, 1:2:4 using (20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams, bases for columns, etc, under-reamed piles, etc all as specified and direcetd.
M&L for form work to sides of Concrete foundatins, footings, bases of columns plinth beams for rough finished surfaces of concrete flat etc all as specified and direcetd.
M&L for providing RCC Nominal Mix Type B0, 1:2:4 using (20 mm graded stone aggregate) in columns, pillars,piers, posts and struts etc all as specified and directed by Engr-in-Charge.
M&L for form work to sides of pillars, posts, struts, piesrs, columns and stanchions etc for rough finished surface of concrete flat all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with spounge finishall as specified and directed by Engr-in-Charge
M & L Framed work as in doors or gates of angle or other section, hollow section with gusset plates, rail, braces, etcof Fe 290 Gde E 165 complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.complete all as specified and directed by Engineer-in-Charge.
S & F for MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long 5 to 10mm dia of shank etc complete all as specified and directed by Engineer-in-Charge
Supply only chain link MS galvanised fencing incl line wire 50x50 mm mesh size with 3 to 4 mm thickness and any type of strands, rails, straining bolts etc incle provn of binding wire all complete all as specified and directed by Engineer-in-Charge
Fixing only chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire complete all as specified and directed by Engineer-in-Charge
S & F for GI two strand, steel barbed wire 2.24mm dia, narbed with 2mm dia barbs @ 75mm spacing and straining and fixing to any type of standard rail, straining bolts, inlc securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc.(Each line of wire to be measured.) complete all as specified and directed by Engineer-in-Charge
M & L for preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer surface area not exc. 10cm in width or girth complete all as specified and directed by Engineer-in-Charge
H S TAKHI (BID ID -3105539)
Star Construction (BID ID -3101857)
M/S B.A. GAIKWAD (BID ID -3101139)
S Y Itkar Construction and Company (BID ID -3108442)
DR J S CHADHA AND SONS (BID ID -3106562)
KARPE AND SONS CONSTRUCTION (BID ID -3101786)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .