Clearing jungle and felling trees of AEEoffice surroundings and name board fixing at canal subdivision Alathur

Amount

ACTIONPLAN 2025-26

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

9.120.1:Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification & drawing.30 mm thick plain PVC door shutters

2.33.1:Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth

OD9318/2025-2026:Information Board.Name board suppiying and fixing information board 8000x1200 mm Size.Using 16 gauge thick sheet surrounded by MS angles including fabrication,a priming coat With metal primer,fixing etc. complete as per direction of the departmental officers at site.

RAMESH.M (BID ID -2234659)

Sreekumar C K (BID ID -2234047)

BHUVANESWARAN.P (BID ID -2235471)

Bidder Name

Sreekumar C K

C.K.BABU

BHUVANESWARAN.P

RAMESH.M