Relocation of main gate at MW Building, Chittoor.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

Centering and shuttering including strutting, propping etc., and removal of form for

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above in foundation and plinth in:

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.

12 mm cement plaster of mix :

15 mm cement plaster on the rough side of single or half brick wall of mix :

Finishing walls with Acrylic Smooth exterior paint of required shade :

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Removing existing steel gate from RCC column using gas cutting machine and refixing of existing steel gate in position, making good, including, transportation and all other incidental charges etc., all complete as directed by Engineer in charge. (Necessary fixtures will be paid separately)

Providing and fixing cylindrical hinges of good quality in available frames and gate makining good etc ..complete.

TOTAL

1. यदि किसी भी दर को रिक्त छोड़ दिया जाता है, तो वह "शून्य" माना जाएगा. 1. If any cells (Rates) left Blank, then the same will be treated as "Zero".

CONTRACTOR

BSNL Civil Division,TIRUPATI