MAINTENANCE AND REPAIRING WORK OF VARIOUS MUNICIPAL SCHOOL & AAGANWADI BUILDINGS IN TPS NO.20,.68,51,92 & NEWLY ADDED VILLAGE AREA (KATHODARA,LASKANA,KHADSAD) IN NEW EAST (SARTHANA) ZONE , SURAT.

NAME OF WORK :- MAINTENANCE AND REPAIRING WORK OF VARIOUS MUNICIPAL SCHOOL &

AAGANWADI BUILDINGS IN TPS NO.20,68,51,92 & NEWLY ADDED VILLAGE AREA

(KATHODARA,LASKANA,KHADSAD) IN NEW EAST (SARTHANA) ZONE , SURAT.

SN ITEM Qty Unit Total

Excavation for foundation includ.sorting out &

stacking of useful materials & disposing of the

excavated stuff upto 50 mt. Lead & all lift,

watering etc. Comp. (A) Loose or Soft soil

1 Executed With Mechanised Efforts /

(1) Up to 1.5 Mt. depth 10 117.26 C.M.

Excavation for foundation includ.sorting out &

stacking of useful materials & disposing of the

excavated stuff upto 50 mt. Lead & all lift,

watering etc. Comp. (A) Loose or Soft soil

2 Executed With Manual Labours

(1) Up to 1.5 Mt. depth 5 203.83 C.M.

Providing & Laying C.C1:5:10 (1cement :5coarse

sand :10 graded stone agg. 40 m.m Nominal size

)& curing comp. excl. cost of from work in

:Foundation & Plinth

Providing & laying cement concrete 1:4:8 (1

cement:4 coarse sand:8 graded stone agg. 40 mm

nominal size) & curing comp. excl.cost of form

work in (A) Foundation and Plinth

Providing & laying C.C 1:3:6 (1cement :3 coarse

sand :6 Crushed stone agg 20m.m Nominal

size)&curing comp. excl. cost of form work in :(a)

foundation & Plinth

Providing & laying cement concrete 1:1.5:3 (1

cement:1.5 sand:3 graded stone agg. 20 mm

nominal size)& curing comp. Includ.cost of form

work but exclu. Cost of reinforcement for

reinforced concrete work in : (A) Foundation,

footing, Base of columns and Mass concrete.

Filling available excavated earth (excluding rock)

in trenches. plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth consolidating

each disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc.

SN ITEM Qty Unit Total

Providing & laying ordinary cement

con.1:1.5:3(1cement:1.5sand:3 graded graded

stone agg. 20 mm nominal size) finishing

smooth curing etc. comp. Incl.. Cost of form work

but excl. Cost of reinforcement for R.C.C. Work in :

(1)Having c/s area up to 0.08 s.mt- Ground Floor 7 12,632.60 C.M.

First Floor 2 12,672.24 C.M.

Second Floor 2 12,711.88 C.M.

Terrace (third) Floor 2 12,751.53 C.M.

(2) c/s area more than 0.08sq. mt. & upto

First Floor 2 11,206.61 C.M.

Second Floor 2 11,246.25 C.M.

Terrace (third) Floor 2 11,285.89 C.M.

(3) Having cross sectional area more than

First Floor 3 9,241.32 C.M.

Second Floor 3 9,280.96 C.M.

Terrace (third) Floor 2 9,320.61 C.M.

(1)Having c/s area up to 0.08s.mt- Ground Floor 7 9,102.61 C.M.

First Floor 2 9,142.25 C.M.

Second Floor 2 9,181.89 C.M.

Terrace (third) Floor 2 9,221.53 C.M.

(2) Having c/s area more than 0.08 s.m. & upto

First Floor 2 8,214.05 C.M.

Second Floor 2 8,253.69 C.M.

Terrace (third) Floor 2 8,293.33 C.M.

(3) Having cross sectional area more than

First Floor 2 7,126.52 C.M.

Second Floor 2 7,166.16 C.M.

Terrace (third) Floor 2 7,205.81 C.M.

(2) Slabs having more than 8cm. and upto

First Floor 1 8,024.06 C.M.

Second Floor 0 8,063.70 C.M. -

Terrace (third) Floor 0 8,103.34 C.M. -

(3) Slabs having more than 10 cm. & upto

First Floor 2 7,436.60 C.M.

Second Floor 2 7,476.24 C.M.

Terrace (third) Floor 0 7,515.89 C.M. -

(4) Slabs having more than 13 cm. Thickness --

First Floor 2 6,852.65 C.M.

Second Floor 2 6,892.29 C.M.

Terrace (third) Floor 0 6,931.94 C.M. -

(D) LINTELS: -- G.F 5 9,531.24 C.M.

SN ITEM Qty Unit Total

First Floor 2 9,570.88 C.M.

Second Floor 2 9,610.53 C.M.

Terrace (third) Floor 0 9,650.17 C.M. -

(E) CHAJJAS: -- G.F 5 5,512.83 C.M.

First Floor 2 5,552.47 C.M.

Second Floor 2 5,592.11 C.M.

Terrace (third) Floor 0 5,631.76 C.M. -

Providing & laying ordinary cement

con.1:1.5:3(1cement:1.5sand:3 graded graded

stone agg. 20 mm nominal size) finishing

smooth curing etc. comp. Incl.. Cost of form work

but excl. Cost of reinforcement for R.C.C. Work in :

(A) Stair cases including landings etc.

Ground Floor 3 7,380.20 C.M.

10 First Floor 2 7,419.85 C.M.

Second Floor 2 7,459.49 C.M.

Terrace (third) Floor 0 7,499.13 C.M. -

(B) Vertical and horizontal fins

Ground Floor 5 10,831.75 C.M.

First Floor 3 10,871.40 C.M.

Second Floor 3 10,911.04 C.M.

Terrace (third) Floor 0 10,950.68 C.M. -

Providing & fixing IS Mark TMT Bar FE 500d

reinforcement for R.C.C. work incl. bending,

binding & placing in position etc.comp.---Ground

First Floor 100 77.21 Kg.

Second Floor 100 78.21 Kg.

Terrace (third) Floor 0 79.21 Kg. -

Brick work using common burnt clay building

bricks having crushing strength not less than

kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 25 4,511.97 C.M.

6 -fine sand)(C) Fly Ash Bricks

12 Ground Floor

First Floor 10 4,786.95 C.M.

Second Floor 5 5,061.92 C.M.

Terrace (third) Floor 0 5,379.24 C.M. -

Half brick masonry in common brunt clay

building bricks having crushing strength not less

than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- 25 625.53 S.M.

Cement : 4 - coarse sand ) in foundation and

13 plinth (C)Fly Ash Bricks

Ground Floor 20 678.86 S.M.

First Floor 10 631.79 S.M.

Second Floor 5 638.04 S.M.

Terrace (third) Floor 0 644.29 S.M. -

Uncoursed rubble masonary with hard

stone of approved quality in foundations and

plinth in cement mortar 1:6 (1 Cement : 6 sand)

including leveling up etc. complete.

SN ITEM Qty Unit Total

Providing Rubble Pitching with hard stone of

approved quality in cement mortar 1:6 (1

Cement : 6 Coarse sand) including leveling up

,Curing etc. complete excluding pointing

Providing and filling rubbles including hand

packing and filling interstices with quarry spalls

behind abutments and between returns as

Providing & Applying 10mm.th.cement plaster

in single coat on brick/ concrete walls similar

surfaces for plastering & finished even & smooth

with a floating coat of cement slurry mixed

with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement :

3sand) (A) For wall

and similar surfaces -- Ground Floor

First Floor 50 217.93 S.M.

Second Floor 20 246.07 S.M.

Terrace (third) Floor 0 274.20 S.M. -

(B) For ceilings &soffits of stairs

Ground Floor 100 214.60 S.M.

First Floor 50 242.74 S.M.

Second Floor 20 270.88 S.M.

Terrace (third) Floor 0 299.02 S.M. -

Providing & Applying 15mm.th.cement plaster

in single coat on brick/ concrete walls similar

surfaces for plastering & finished even & smooth

with a floating coat of cement slurry mixed

with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement :

3sand) (A) For wall and similar surfaces --

20mm thick sand faced cement plaster on

walls for height more than 10 metres above

ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

Providing 20 mm thick double coat mala cement

plaster on brick / concrete work for plastering

comprising of base coat 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse

sand) in rough finishing and 8 mm thick top coat

of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing

SN ITEM Qty Unit Total

Providing & Applying 20mm. Th. Heavy Roller

plaster on walls or similar surfaces at all floor

levels consisting of 12 mm av. Th. Backing coat of

C.M. 1:3 (1 cement:3 sand) & 8 mm. th.

21 Finishing coat of C.M. 1:1 (1 cement: 1 sand) 100 324.00 S.M.

apply thick cement slurry and apply roller

horizontal as well as vartical ( two times ) up to

good quality and size of grain in elevation as per

directed by engineer incharge.

Providing throating or plaster drip and

22 moulding it to R.C.C. chajja etc. comp.. For all 10 41.66 R.M.

Providing 20 mm deep finished groove in

23 plaster in line and level etc. Comp. For all Floor 10 50.00 R.M.

Providing and laying polished Kota stone slab

flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A)

Providing and laying polished kota stone slab

25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3

25 (1- Cement : 3 coarse sand) and jointed with 50 1,076.94 S.M.

gray cement slury mixed with pigment to

match the shade of slab including rubbing and

polishing etc. complete.

Providing & Laying white glazed tiles

6mm. th. of Orient, Kajaria,

Jhonson,Nitco,Somani ,Bell make at all floor

26 levels, in flooring, treads of steps & landings 100 857.42 S.M.

laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3

sand) finished with flush pointing in white

cement etc.com. For all floors

Providing & Laying white glazed tiles

6mm. th. Of Orient, Kajaria,

Jhonson,Nitco,Somani,Bell make at all floor levels

27 in skirting risers of steps & dado on 10 mm. th. 500 887.64 S.M.

C.M.1:3(1cement :3 sand) including necessary

cement paste for fixing and joined with white

cement slurry etc. complete. For all floors

Providing and laying Ceramic tiles 6mm thick in

flooring treads of steps and landing laid on a bed

28 of 12mm thick cement mortar 1:3 (1-cement : 3- 10 914.69 S.M.

coarse sand ) finishing with flush pointing in

SN ITEM Qty Unit Total

Providing and laying Ceramic tiles 6mm thick

in skrting risers of steps and dedo on 10mm

thick cement plaster 1:3 (1-cement : 3-coarse

sand) and jointed with white cement slurry

Providing & laying granite slab 18mm thick

in flooring, treads of steps and landing laid

on bed of 20mm thick cement mortar 1:6 (1

30 Cement : 6 coarse sand) or lime mortar 1:1.5 laid 50 2,410.00 S.M.

and finished with flush pointing in white or colour

cement including rubbing and polishing

complete. ( Basic Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick

in skirting, risers of steps, dedo and pillars

laid on 10mm thick cement mortar 1:4 (1

31 Cement : 4 Coarse sand) and finished with flush 25 2,449.00 S.M.

pointing in white or colour cement including

rubbing & polishing comp.. (Basic Rate:-

Providing & laying granite slab 18mm thick in

Window-Door seal Frame Etc laid on 10mm

thick cement mortar 1:4 (1 Cement : 4 Coarse sand)

32 with nessary adhesive material and finished with 20 2,026.00 S.M.

flush pointing in white or colour cement, including

rubbing & polishing comp.. (Basic Rate:-

33 Labour Charges For Edge Finished For Granite 50 43.43 R.M.

Providing & laying Vitrified tiles of 8mm

thick of Orient, Kajaria, Jhonson, Nitco, Somani,

Bell, Asian or Euro make in flooring,treads of

steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1

Cement : 6 Coarse sand) on new surface or

fixing on existing flooring by adhesive material

including dismentaling of existing flooring and

jointed with colour cement slurry including

finished with flush pointing & cleaning the

surface etc. comp.Size 24" x 24"

For Antiskid tiles

Providing and laying Vitrified tiles 8 to 10 mm

thick, 24" x 24" in flooring treads of steps and

35 landing laid on a bed of 12mm thick cement 100 1,040.35 Sqm.

mortar 1:3 (1 cement : 3 coarse sand) finishing

with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm

thick, 24" x 24" in skrting risers of steps and dedo

36 on 10mm thick cement plaster 1:3 (1 cement : 3 25 1,081.71 Sqm.

coarse sand) and jointed with white cement

SN ITEM Qty Unit Total

Providing & fixing 35mm.th. Flush Door Solid

Double Core type Both Face water proof Ply

Vennered & 1.5 mm th.laminate shall be

pasted on both side with adhesives as specified

37 by the manufacturers. The laminate shall be as per 25 3,720.00 S.M.

approved shade & texture, of make incl. Sal wood

frames of finished size 12cm x 7cm .incl. S.S.

Hinges with nessary screws & Anodized

aluminum fixtures & fastenings For all Floor

38 Same as Above But Without Frame 20 2,520.00 S.M.

Providing & fixing 35mm.th. Indian teak wood

shutters for doors, windows & clearstory

windows incl. Indian teak wood frames of

finished size 12cm x 7cm.incl. anodized 20 5,533.68 S.M.

39 aluminum fixtures & fastenings incl. Primer

coat of approved quality & two coats of oil

painting etc. For all Floor (A) Fully Panelled

(B) Partly Panelled and Partely Galzed 10 5,185.03 S.M.

(C) Fully Galzed 5 4,551.69 S.M.

Providing and fixing 35mm thick shutters for

Doors, windows and clearstory windows

40 including anodised alluminium butt hinges with 5 3,941.37 S.M.

necessary screws. (A) Indian teak wood. (i) Fully

Providing and fixing FRP FRAME size 125 x

mm and 35 mm thick FRP shutter with wood

grain raised panneled design finish shutter having

extra reinforcement on sides & edges in Gel coat

finish. The core of the shutter & frame is to be

filed up with injected polyurethene foam done in

41 situ along with embedded wooden pieces for 20 2,019.98 S.M.

stiffening & also taking hinges & fixtures. The

whole FRP frame & shutter is to be water proof

weather proof,termite proof &resistance to mild

acid/alkali. Rates are to be inclusive of S.S.hinges

with fastener sleeve & alluminium fixtures &

Providing & fixing M.S.Grills of required pattern

to wooden frames of windows etc. At all floor

levels with M.S. flats at required spacing &

42 frame around square or round bars with round 1000 104.20 Kg.

headed bolts & round headed bolts and nuts or by

screws incl. Priming coat of Red lead paint etc.

comp. (A) Plain grill For all Floors

SN ITEM Qty Unit Total

Providing & fixing in position collapsible steel

shutters with vertical channels 20 x10 x 2 mm.

Braced with flat iron diagonals 20 x5mm size

with top & bottom rails of T-iron 40x40x6mm.

with 38mm dia. steel pulleys comp. with bolts,

locking arrangements, stoppers, handles incl.

applying a priming coat of Redlead paint etc.

Providing and fixing M.S. Fan clamps type 1 to

mm dia M.S. bar bent to shpe with hooked ends

44 to RCC slabs curing, layig including painting 10 129.02 Each

the exposed portion of loops, all as per standard

design complete.

Providing & laying ordinary C.C.1:1.5:3 mix for

R.C.C. work incl. boxing, centering, vibrating,

curing & mixed with approved water proofing

cement compound or "CEMWET"or"PIDICRETE

LW"integral water proofing admixture as water

proofing agent to be mixed with 50 kg.

cement bag shall be as recommended by the

manufacture of the water proofing material,

concrete work for top, bottom slab & side

pardi for Under ground Tank & Item incl.

Necessary excavation & refilling the available

earth, 15 cm th' C.C 1:4:8 for bedding concrete,

Half B.M. in C.M. 1:4 outside wall, inside R.C.C.

pardi as per design, 10mm.th. water proofing

cement plaster in C.M. 1:3 with smooth

finishing,watering etc.Comp.to all inner face &

bottom of tank curing etc. comp. incl. Locking

arrangement, outlet, inlet, overflow & wash out

pipe arrangement as necessary & C.I. Cover 0.60 x

.045 weight not less then 35kg. etc. com. as per

structural drawing excluding Steel & as directed

by Engineer- in-charge

Underground tank 1000 5.46 Lit.

Providing and filling in depressions of Bath and

W.C. At all floor levels, after completing plumbing

work of pans, pipes,traps etc.with cinder or fly

ash as directed by Engineer in charge etc. comp..

NOTE :- (1) The whole work is to be executed

through specialized agency with a guarantee of

10 (Ten) years given on a prescribed

proforma duly stamped (2) The rate shall

include for work at all floors & conducting

water proof test as directed. (M.R.)

SN ITEM Qty Unit Total

(A) Providing and laying water proofing

treatment to vertical and horizontal surfaces of

depressed portions of W.C.,kitchen and the like

consisting of :

(a) I course of applying cement slurry @

kg/sqm mixed with water proofing compound

conforming to IS : 2645 in recommended

(b) II course of a layer of plaster in C.M. 1:3 with 50 296.00 S.M.

water proofing compound confirming to IS:2645

about 25 mm. th' in the floor of the depression &

about 18mm th' On the side walls of the

depression up to the floor level, water proofing

plaster about 18 mm. th' be continued on the

walls above the floor level for a height of 600 mm.

with surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to

12mm nominal size spreading @0.008 C.M./S.M.,

(B) Providing and laying integral cement based

water proofing treatment including preparation

of surface as required for treatment of roofs,

balconies, terraces etc. consisting of following

(a) Applying and grouting a slurry coat of neat

cement using 2.75 kg/sqm of cement admixed

with proprietary water proofing compound

comforming to IS:2645 over the R.C.C. slab

including cleaning the surface before tratment.

(b) Laying cement concrete using broken

bricks/brick bats 25 mm to 100 mm size with

50% of cement mortar 1:5 (1 Cement : 5 Coarse 50 511.00 S.M.

sand) admixed with proprietary water proofing

compound conforming to IS:2645 ,brick bats is

finally covered by jointless cement plaster 20mm

th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth

finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried

along the vertical surface of the parapet & other

adjoining wall up to height of about 300 mm in a

shape of quarter round vata Incl. curing etc. Comp.

With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded

with water for a minimum period of two weeks

for curing and for final test. All above operations

to be down in order and as directed and specified

by the engineer-in-charge. With average thickness

of 120 mm and minimum thickness at khurra as

65 mm. (Cement consumption 0.511 Bags / S.M.)

SN ITEM Qty Unit Total

Proiding & laying water proofing treatment to

vertical and horizontal surfaces like consisting of

(a) I course of applying cement slurry 4.4 kg per

sq.mt. mixed with water proofing compound

confirming to IS:2645 in rcommended

proportions. (b) II corse of 20mm cement plaster

48 1:3 mixed with water proofing compound in 50 505.00 S.M.

recommended proportion (c) III course of

applying blown or / resideal bitumen applied hot

at 1.7 kg per sqm of area. (d) IV course of 400mm

micron th. PVC sheet. (Overlaps at joints of PVC

sheet should be 200mm wide and pasted to each

other with bitumen about 1.7 kg./ sqm.)

Providing & fixing G.I. Rain water spout of

mm.dia & 30 cm length etc.

Providing & fixing at all floor levels, both face

polished machine cut edge green kota stone

50 slab (30mm) for urinal partition joined with 10 900.00 S.M.

grey cement slurry (1:1) incl. Rubbing & polishing

etc. complete. (M.R.)

Providing & fixing at all floor levels, both face

polished machine cut edge Marble slab for

51 urinal partition joined with grey/White 5 1,050.00 S.M.

cement slurry (1:1) incl. Rubbing & polishing etc.

complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

WATER SUPPLY AND SANITARY ITEMS

Prov.& Fixing water closet squatting pan

(Indian type W.C.pan) at all floor levels, size

580mm incl. 100 mm size "P'or "S" trap for water

52 closet squatting pan joining the trap with the 10 1,401.60 No.

pan & soil pipe in C.M. 1:1 (1cement :1 fine

sand) etc. Comp.(A) Vitreous china long pattern of

approved colour For all Floor

Providing and fixing Wash Down Water closet

European type W.C. pan with integral P or S trap

including jointing the trap with soil pipe in

53 cement mortar 1:1 (1 cement : 1 find sand) 10 1,303.71 Each

(seat and cover to be measured and paid for

separately) (A) Viterous china pattern - I (i) in

approved colour

Providing and fixing plastic seat and cover for

54 wash down water closet with C.P. brass hinges 10 291.33 Each

and rubber buffers (B) Plastic seat and cover.

SN ITEM Qty Unit Total

Providing & fixing wash basin with single hole for

pillar tap at all floor levels, with C.I. or M.S.

Brackets painted white incl. cutting holes &

making good the same incl. fittings such as pillar

tap, capstan head screw down high pressure with

screws, shanks & back nuts, C.P. Brass waste

trap, screw down stop tap 15 mm. dia. etc.

complete. (A) Vitreous china flat back wash basin

550 mm.x 400 mm. size in approved colour For

Providing & fixing Urinal or approved quality

including conecting the Urinal with waste pipe,

tap etc. complete. (A) White earthenware flat back

or corner type size 430 mm x 260mm x 350mm

Providing & fixing 600 mm.x 450 mm.

mirror of superior glass at all floor levels,

57 mounted on 6 mm. th. A.C. sheet or plywood sheet 5 833.73 No.

& fixed to wooden plugs with C.P.brass screws

and washers etc. For all Floor

Prov. & Fixing S.W. Gully trap with

C.I.grating brick masonary (C.M 1:5)chamber

& water tight C.I. cover with frame of

300mmx300mm size (inside) with weight 5 1,292.19 No.

includ. plastering smooth inside & outside

15mm. th' in C.M.1:3 etc. comp. (i) Square mouth

traps---(A) 100mm x 100mm Size -P type

(B) 150mm x 100mm Size- P Type 5 1,246.92 No.

Prov. & Fixing S.W. Gully trap with

C.I.grating brick masonary (C.M 1:5)chamber

& water tight Pre cast R.C.C. cover of

300mmx300mm size (inside) includ. plastering 5 1,098.48 No.

smooth inside & outside 15mm. th' in C.M.1:3 etc.

comp. (i) Square mouth traps---(A) 300mm x

300mm Size -P type

(B) 150mm x 100mm Size- P Type 5 1,053.20 No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with

Inside dimension ,455 x 610 mm & 450 mm

deep sewer trap chamber with 23 cm th' B.B.

masonary walls in C.M 1:5 with cement plaster

mm th' in C.M. 1:3 inside & outside to exposed

faces, R.C.C. top slab with 1:2:4 mix ( 1 cement:

Sand : 4 Grade stone aggregate 20mm size)

,Foundation concrete 1:5:10 & fixing C.I. cover

with frame to be not less than 38 kg. On top etc.

comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty

Cover instead of C.I. Cover

Extra for every additional depth of 0.1 mt

beyoung 0.45 mt

SN ITEM Qty Unit Total

Providing & construction simple chamber of

cm. th' B.B. Masonary in C.M 1:5 with cement

plaster 15 mm th' in C.M. 1:3 inside & outside

to exposed faces, R.C.C. top slab with 1:2:4 mix

( 1 cement: 2 Sand : 4 Grade stone aggregate 5 2,932.93 No.

20mm size) ,Foundation concrete 1:5:10 &

61 fixing C.I. cover with frame to be not less than

kg. On top etc. comp. Inside dimension,455 x

610 mm &450 mm deep for single pipe

(A) Same as above but Precast RCC heavy duty

Cover instead of C.I. Cover

Extra for every additional depth of 0.1 mt

beyoung 0.45 mt

Providing, Lowering & laying joining R.C.C. NP2

CLASS Pipe In C.M. 1:1 of following nominal

62 internal diameters incl. Testing of pipes and

joints etc. Comp

Providing & Fixing C.P. Brass screw down bib

tap at all floor levels, polished bright etc. comp.- 25 186.83 No.

(A) 15mm dia. For all Floors

Providing & Fixing gun metal check or non

return full way wheel valve at all floors levels, 25 186.83 No.

etc. complete. (A) 15 mm. dia.

Providing & Fixing chromium plated brass half

turn flush cock at all floor levels, of approved

quality incl. fixing in pipe line etc. Comp.-- 25 mm

Providing & Fixing abonite ball cock of

65 approved qualities directed etc. comp. (A) 25 10 102.91 No.

Providing and fixing C.I. Machinehole cover

66 0.60 x 0.45 mt. Size having weight not less 5 958.17 No.

than 35 Kg. etc. complete.

Providing and fixing C.P. brass waste for

washbasin or sink.

(A) 32mmdia. 5 67.91 Each

(B) 40mm dia. 5 89.83 Each

Providing & Fixing U-PVC pipe (SWR) confirming

to IS no. 13592 (Type "B") of

Prince/Supreme/Jain/Astral/Tulsi/Finolex

make for soil and waste discharge system at 50 412.00 R.M.

68 all floor levels incl. All fixtures like bends, tees,

shoe etc. jointed with resin of approved brand

& manufacture etc. comp. (M.R.) (a) 75mm Dia

SN ITEM Qty Unit Total

Providing & fixing U-PVC pipes Confirming to

IS no. 13592 (Type "A") of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex

make for rain water at all floor levels incl. 10 203.00 R.M.

69 fixtures like bends, tees, shoe etc joined with

resin of approved brand & manufacture etc.

comp. (M.R.) (A) 75 mm. Dia.

Providing, Laying and jointing on true line and

level UPVC pipe (SCH-40) line of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex

make including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be

fixed on the wall the help of clamp at every

two meter C/C or shall be concealed as

directed including necessary fittings etc.

70 including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

(F) 65 mm dia. 5 R.M. -

Providing & Fixing P.V.C. pipes (SCH-80) of

Prince/ Supreme/ Jain/ Astral/ Tulsi/Finolex

make for water supply line at all floor levels

incl. fixtures like bends, tees, shoe etc joined

with resin of approved brand & manufacture etc.

comp. Pipe shall be fixed on the wall the help of

clamp at every two meter C/C or shall be

concealed as directed including necessary

71 fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 110x110 mm diameter with jali

of the following nominal diameter of self cleaning

design with C.I. scread down or hinged grating

including the cost of cutting and making good the

Providing & Fixing in position PVC

Cowl vent to pipes of

73 Prince/Supreme/Jain/Astral/Tulsi/Finolex

make etc.Comp. (A) 75 mm. dia.

(B) 110 mm Dia. 5 50.00 NO

SN ITEM Qty Unit Total

Providing & fixing M.S. Holder Bat clamps at

all floor levels of approved design to C.I. Or

74 S.C.I pipes including the cost of cutting holes 5 30.00 No.

& making good the wall etc. Complete - 100 mm.

Providing & fixing G.I./Aluminum Patti clamps

at all floor levels of approved design to C.I. Or

75 S.C.I pipes including the cost of cutting holes 5 20.00 No.

& making good the wall etc. Complete - 100 mm.

Providing erecting and fixing double coated

Sintex/Super/Reno PVC (ISI) mark water tank

of required capacity each with all necessary

fittings & connection etc. complete on terrace.

Providing & Fixing Kathi around the vertical

PVC drainage pipes for concealing with cement

plaster 20 mm avg thickness(CM 1:3 [1 cement :3

coarse sand]) finishing as per instruction given by

Eng. incharge. for

(A) 75 mm PVC PIPE 10 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 10 180.00 R.M.

Providing & fixing C.P. brass pillar cock with

78 copper connection, C.P.

brass screws complete

Make- Cera F2013101, Parry ware Cat. No.:

G3102A1, HindWare Cat. 5 1423.00 NO.

No.: F650003, Jaquar FLR-5011N

Providing & Fixing 15 mm Dia 2 way bib tap with

79 wall Flange at all

floor levels, polished bright etc. comp.

Make- Cera F2013163, Parry ware G4834A1,

HindWare Cat. No.: 5 1755.00 NO.

F530004, Jaquar FLR-5041N

Providing & fixing 15mm C.P. brass angle valve

(Stop Cock) with

80 C.P. copper connecting pipe 450 mm long and

nuts, washer and brass flange complete, including

cutting and making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1,

HindWare Cat. No.: 5 1432.00 NO.

F440020 F850094, jaquar CON 053 KN

Providing & fixing of overhead shower 80 mm

(3”) dia with 3 flow with

Overhead Shower arm 200 mm with wall flange

Make- Cera F7010602AB, Parry ware, Jaquar OHS-

1989 ,HindWare 5 1569.00 NO.

Cat. No.: F160144

Providing and fixing Towel Ring fabricated from

seamless stainless steel tube 2mm thick in bath

room with polished wall flange at end of bars with

heavy duty anchor fasteners & accessories.

SN ITEM Qty Unit Total

Make- Cera F5014115CH, Parry ware

F5014115CH, Jaqua ACN- 1121N ,HindWare 5 890.00 NO.

Providing & fixing S.S.towel rail of 600 mm long

approved make including, providing & fixing C.P.

brass screws, making holes in walls & making

Make- Cera F5015103CH, Parry ware F880005T,

Jaquar 1111BSM 5 1043.00 NO.

,HindWare F880005T

Providing & Fixing stainless steel recessed type

Soap dish of approved make. Including providing

& fixing screws, washers, cutting

& making good the walls.

Make- Cera F5007106, Parry ware T6902A1,

Jaquar ACN-1131N 5 793.00 NO.

,HindWare F880011

Providing Metropole Flush Valve Dual Flow 40mm

Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1

Jaquar FLV-1089NSQ 5 3465.00 NO.

,HindWare F860075

86 Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1

Jaquar FLR-5347N 5 1722.00 NO.

,HindWare F650013

Providing and fixing waste Pipe for Washbasin or

Providing and fixing Supply Pipe for Washbasin

Providing and fixing Jet Sprey Cock at all floor

level etc. complete.

ITEMS FOR COMPOUND WALL & OTHER MISC. I

Boring holes 3.5 mt.deep in ordinary soil ( for

cast in situ piles) & disposal of the surplus

excavated soil as directed within a lead of

90 M. For following diameter of piles.

Providing & laying cement concrete 1:2:4 (1

cement:2 sand:4 graded stone agg. 20 mm

nominal size)& curing comp. Includ.cost of form

work but exclu. Cost of reinforcement for

reinforced concrete work in : (A) Foundation,

footing, Base of columns and Mass concrete.

SN ITEM Qty Unit Total

Providing & laying ordinary cement

con.1:2:4 (1cement:2sand: graded stone

agg. 20 mm nominal size) finishing smooth

curing etc. comp. Incld. Cost of form work but

excl. Cost of reinforcement for R.C.C. Work in : Up

to G.L./P.L. (A) COLUMNS:

(1)Having c/s area up to 0.08s.mt 5 12,123.79 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto

(3) Having cross sectional area more than 0.12 sq.

(1)Having c/s area up to 0.08s.mt 5 8,593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto

(3) Having cross sectional area more than 0.12 sq.

Providing & laying C.C 1:3:6 (1cement :3 coarse

sand :6 crushed stone agg.

20 m.m Nominal size)& curing comp. incl. cost

of from work in: wall caps/ copings.

Steel work welded in built up sections,

framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead

(A) in beams & joists channels angles, tees,

flats with connection plates or angle cleats as

in main & cross beams,hip & trussed purlins

connected to common raffers & the like.

(B)For work like chain link fencing, above

compound wall etc.

(C)in trusses & trussed purlins upto 25m.Span

&15m.Overall height

Providing and fixing G.I. chain link of 50mm x

50mm size x 10 guage thick with nuts, bolts,

washer or G.I. pins, excluding M.S. angles

etc.complete as per relevent IS specification &

directed by engineer in charge. (TATA or Jindal

Providing and fixing and fitting TATA or Jindal

make G.I. barbed wire fencing with necessary

barbed wire (12 x 14 guage, weight not less than

0.14 kg. / mt.) pins, hooks, excluding M.S. angles

etc. complete as per relevent IS specification.&

directed by engineer in charge

Providing & fixing colouron galvaniced steel,

zinc / aluminium allus coated sheet 0.5 mm.

thick roofing fixed with gslvanised grom J or L

97 hook bolts and bolt 8mm dia with bituman and 100 999.00 S.M.

impet washer filled with white lead etc.

Excluding the cost of purlins rafter and trusses.

(Tata / Jindal or equivalent)

SN ITEM Qty Unit Total

Providing and Fixing hot dip concertina coil of

610 mm dia. made out of 2.59 mm (12 SWG) hot

dip galvanized (G.I. coating not less than

gm/sqmt.) th. wire having 80 nos. of spikes and

200 nos. of clips made out of stainless steel (AISI

304) 1.5 mm th. dia., G.I. strips 0.5 mm th. ( G.I.

coating not less than 120 gm/sq.mt.) weight of

one coil should not be lesss than 15 kg. etc.,

complete at the top of compound wall fixed with

S.S. clips and binding wires whereever necessary

etc. complete. ( NOTE: Strctching length of one

coil should not be more than 9 mt.)

Providing corrugated G.I. Sheets of class-3

roofing fixed with glavanished iron J or L Hooks,

Bolts and nuts 8m diameter with bitumen and G.I.

99 limpet washer or G.I. limpet washer. filled with 20 727.13 S.M.

white lead complete excluding the cost of

purlins, Rafters and Trusses. (1) 0.80 mm

thick sheet. (Tata / Jindal or equivalent)

Providing corrugated G.I. Sheets of class-3

roofing fixed with glavanished iron J or L Hooks,

Bolts and nuts 8m diameter with bitumen and G.I.

100 limpet washer or G.I. limpet washer. filled with 20 1,016.00 S.M.

white lead complete excluding the cost of

purlins, Rafters and Trusses. (1) 0.63 mm

thick sheet. (Tata / Jindal or equivalent)

Providing & fixing 150mm wide 450mm over

all semicircular plain G.I. sheet class-3

gutter with iron brackets 40mm x 3mm size

bolts, nuts, washers etc. including marking

necessary connection with rain water pipes. (i)

Providing ridges or hips 600mm over all in

plain G.I. sheet fixed with G.I. "J" of "L" hooks

bolts and nuts 8mm dia G.I. limpet and

bitumen washer complete (1) 0.80 mm thick

Providing & fixing 150mm wide 450mm over

all semicircular plain G.I. sheet class-3

gutter with iron brackets 40mm x 3mm size

bolts, nuts, washers etc. including marking

necessary connection with rain water pipes. (i)

Providing ridges or hips 600mm over all in

plain G.I. sheet fixed with G.I. "J" of "L" hooks

bolts and nuts 8mm dia G.I. limpet and

bitumen washer complete (1) 0.63mm thick sheet

SN ITEM Qty Unit Total

Providing & Fixing UV stabilise FRP Sheet

roofing with overlapping the main cladding on

both edges. All fixing holes must be predrilled

oversize as specified for the sheet length and

fastener being used. Fasteners must be fitted with

approved washers. Fixings should be tightened to

ensure a weatherproof seal but they must not be

over tightened Side-lap fasteners must also be

installed at specified centers with the FRP sheet

105 having clearance holes provided as per the main

fasteners Weatherproofing shall be provided at all

flashing points under the normal flashing by the

fitting of a foam closure strip to match the profile

being used. Closure strips will be sealed to the

sheet with an appropriate non setting silicone

sealant. Excluding the cost

of purlins rafter and trusses.

(a) 1.5 mm thick 10 992.00 SM

(b) 2 mm thick 5 1,100.00 SM

Providing & Fixing Polycarbonate sheet

roofing with surface of the sheet is coated with an

anti-UV Co-extrusion layer having good weather

resistance, it can maintain its optical properties

and mechanical performance for a long time.

Fasting is usually done by screws. , The fastening

screws should be inserted about 500 mm apart

and 300mm apart Along the supporting internal

purlin and edge pulin.All fixing holes with

diameter at least 2 mm larger than screw must be

predrilled into each screw location. The screws

should be 6mm diameter with length according to

sheet thickness and corrosion resistant, with at

least heavy duty hot dripped galvanized or

stainless steel. Excluding the cost of purlins rafter

(a) 1.5 mm thick Solid Sheet 10 1,261.00 SM

(b) 2 mm thick Solid Sheet 5 1,510.00 SM

Providing & Fixing 80 mm dia M.S. pipe as

vertical post are beded in 1:1.5:3 concrete also

107 horizontaly in line and connecting to purline angle 10 750.00 R.M.

etc by welding rereting etc. (a) Medium duty

Providing & Fixing 50 mm dia M.S. pipe as

vertical post are beded in 1:1.5:3 concrete also

108 horizontaly in line and connecting to purline angle 10 485.00 R.M.

etc by welding rereting etc. (a) Medium duty

SN ITEM Qty Unit Total

Providing & fixing black board on walls of

1.8mt.x1.2mt size made up to 12 mmth.B.W.P

.Plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) fixed with teak

wood beading of 65 mmx 50mm size, rubbing &

sanding comp., incl. applying two coats of black

board paint over a priming coat on plywood &

French polishing the frame all round etc.

Comp. as per instruction of Engineer in charge

Providing & fixing Green board on walls of

1.8mt.x1.2mt size made up to 18 mm th.ply

(using IS 710 Marin ply) with 1 mm thick

outside green board & 0.8mm backside white

110 laminate & with good Quality of adhesive 2 5,195.00 No.

with appropriate fittings of Alluminium fittings or

teak wood bedding 65 mmx 50mm size, rubbing &

sanding comp., as per instruction of Engineer in

Providing & fixing White board on walls of

1.8mt.x1.2mt size of 12mm thick with

111 appropriate fittings and Alluminium fittings 2 4,230.00 No.

comp., as per instruction of Engineer in charge

Providing & Fixing Reading table size 8' x 4'

and height 2'-6" with table top 18mm thick

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood

Stock or century) commercial plywood with

1.0mm thick lamination sheet fitting with

teakwood moulding table top supported on 3" x 3"

teakwood leg & 3" x 11/2" teakwood framing top

and bottom with french polish labour work

hardware etc. as per site in charge instruction and

as per drawing.

Providing & Fixing Librarian table with 18mm

thick commercial plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) )with 1.0mm thick lamination sheet table

top supported on 2" x 2" teakwood leg & make

nos. drawers of 1' 3" width on both side with

necessary french polish hardware labour etc. as

per site incharge instruction and as per drawing (

Size 4' x 2'-6" x 2'-6", all framing other then legs

are teak wood of size 2" x 1")

Providing & Fixing simple 12mm thick

commercial plywood (Brand Saras,Kitply,Uniply,

Anchor, Green,Wood Stock or century) Rack of

114 size 6' x4' and depth 1'-6" 5 Nos. horizontal 1 7,690.00 NO

partition, supported 2" x 1" framing with

necessary french polish hardware labour etc. as

per site incharge instruction and as per drawing.

SN ITEM Qty Unit Total

Providing & Fixing fitting commercial 8mm thick

plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) magazine stand of

Size 6' x 4' with 3" x 11/2" vertical supporting

and adjustable lag support and horizontal simple

2" x 1" teakwood patti for magazine support with

necessary french polish hardware labour etc.as

per site in charges instruction and as per drawing.

Providing and fixing stainless steel ( Grade 304)

railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing,

polishing and making curvature (wherever

required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c

fixing the railing with necessary accessories &

116 stainless steel dash fasteners , stainless steel 50 450.00 Kg

bolts etc., of required size, on the top of the

floor or the side of waist slab with suitable

arrangement as per approval of Engineer-

incharge, (for payment purpose only weight of

stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts,

fasteners etc.).

Providing & fixing Z - clamps at all floor levels of

approved design to C.I. S.C.I. or PVC pipes

117 including the cost of cutting holes & making good

the wall etc. Complete - 100 mm dia as per

architect instructions.

(A) 40 to 50 mm dia 10 62.00 No.

(B) 75 to 90 mm dia 10 75.00 No.

(C) 110 mm dia to upto 150 mm dia 10 90.00 No.

(C) 150 mm to 200 mm dia 10 98.00 No.

Providing and constructing sandwitch type

Polish Kota Stone cooking platform 0.6 mt.

wide & 0.75 mt. height, including one end side

Polish Kota stone (Double Polish) of 1.25 mt.

height & front Polish Kota stone patti of 10 cm

wide, vertical partitions of half B.M. wall in C.M.

1:4 and 10mm th. plaster in 1:3 with finishing

smooth with cement slurry as required and

Stainless Steel sink of 0.45 mt x 0.45 mt size of

approved quality and make with required all

fitings & fixitures etc. comp as per instruction

given by site in charge at all floors.

SN ITEM Qty Unit Total

Providing and constructing sandwitch type

Granite stone cooking platform 0.6 mt. wide &

0.75 mt. height, including one end side granite

stone (Double Polish) of 1.25 mt. height & front

granite stone patti of 10 cm wide, vertical

partitions of half B.M. wall in C.M. 1:4 and

119 10mm th. plaster in 1:3 with finishing smooth 5 3,128.00 Rmt.

with cement slurry as required and Stainless

Steel sink of 0.45 mt x 0.45 mt size of approved

quality and make with required all fitings &

fixitures etc. comp as per instruction given by

site in charge at all floors. (Basic rate of Granite

Providing and fixing 150 mm wide, approved

quality chicken wire mesh (FRP / PVC)at junction

of brick work and RCC work or two dissimilar

120 surfaces, at all heights fixed by nails, rowal plugs 10 102.00 S.M.

or tag by cement mortar 1:3 before applying the

plaster, including curing, scaffolding all complete

Providing and filling Epoxy grout of

approved or suggested brand by consultant /

121 Engineer in charge in 4mm to 6mm thick tiles 10 40.00 Rmt.

joint including spacer with cleaning of joint by

vacuum or blower etc

Providing and fixing rebar of following

diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make

including cost of all equipments, tools, material,

labour, etc. Standard procedure as

mentioned in manufacturer's specifications

shall be strictly followed, which shall be

submitted and got approved from the authority

prior to start of work. The rate shall also include

122 cost of drilling of hole of required diameter

and depth as mentioned in manufacturer's

specification, cleaning the hole with required air

blower and other necessary tools and tackles,

positioning, providing and grouting chemical,

allied fixtures and fasteners, etc. but excluding the

cost of reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour,

tools and equipments, etc. complete as

directed by the engineer-in- charge.

SN ITEM Qty Unit Total

Carring out plinth treatment to post

construction / existing structure by spraying

chemical solution for termite control treatment

including labour and material consistment with

ISI specification. Using Chlordene and

Chiorpurfiles 20 EC. As per 6131_paret-II

Consentration Weight one percent is

recommended i.e. one litre 20 EC chemical

emulsion with 19 liter give 1% concrentration

inclusive of one litre chemical emulsion

appication at the rate of 5 litre chemical / Sqm of

surface is recommended as per IS.

Providing and fixing rolling shutters of approved

make made of 80 mm wide M.S. laths inter locked

together through their entire lenght and jointed

together at the ends by end locks mounted on

specially designed pipe shaft with bracket

plates, guide channels and arrangements for

inside and outside locking with push-pull

operation including the cost of hood cover and

spring etc. complete (A) Shutters having width

Providing and fixing rolling shutters of approved

make made of 80 mm wide M.S. laths inter locked

together through their entire lenght and jointed

together at the ends by end locks mounted on

specially designed pipe shaft with bracket

plates, guide channels and arrangements for

inside and outside locking with push-pull

operation including the cost of hood cover and

spring etc. complete. (B) Shutters having width

3.5 M and above

Providing & Fixing 3 mm thick metal sheet

with CNC cutting to fix it on vertical

surface.Steel work welded in built up sections,

framed work including cutting, hoisting, fixing in

126 position and applying a priming coat of red lead 5 2,677.00 Smt.

paint in beams & joists channels angles, tees, flats

with connection plates or angle cleats as in main

& cross beams, hip & trussed purlins connected to

common raffers & the like.

Providing and laying broken china mosaic flooring

for terrace using 12mm to 20mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring

mortar creme out upto surface using white

cement including rounding off junctions and

extending them upto 15 cm along the wall clearing

with water and oxalic acid etc. as directed.

SN ITEM Qty Unit Total

Providing and Fixing Hollow steel Sections

Framed Work including Cutting, Hoisting,

128 Welding & Fixing in position Purlin, Main Chord 900 126.00 Kg

etc. as per Engineer- in-charge.TATA / JINDAL /

Providing cement vata (10 cm x 10 cm size)

129 quarter round in cement mortar 1:1 including 10 23.68 Rmt.

neat cement finishing, watering etc. complete.

Apply two coats of putty and two coats of

primer of approved brand and manufacture on

new wall surface to give an even shade

including thoroughly brushing the surface free

from mortar dropping and other matter and sand

papered smooth.

Wall painting (two coats) with plastic

emulsion paint of approved brand and

manufacture on undecorated wall surface to

give an even shade including throughly 50 79.39 S.M.

131 brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

For every subsequent coat Extra over item

Painting two coat (excluding priming coat)

on new steel and other metal surface with

132 synthetic enemal paint, burshing to give an 50 65.31 S.M.

even shade including cleaning the surface of all

dirt, dust and other foreign matters.

Providing & applying two coats of weather

shield max paint (3 coats may be required in

case of darker colours.)of ICI Dulux or Apex

Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour

approved by architects, on exterior surfaces of the

building including scaffolding, preparing the

surface, watering, curing etc. complete and as

directed by the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from

133 all loose dirt, chalk, grease, fungi, algae and 50 82.00 S.M.

flaking paint. This can be achieved by brushing

with a wire/ stiff coir brush, followed by water

jetting if required. Fill up all minor cracks and

defects with white cement and sand mixture in

the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface

thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and

allow it to dry for 4-5 hours. Application of putty

is not recommended.

Minimum 4-6 hours duration is required between

SN ITEM Qty Unit Total

Providing and fixing window having extruded

aluminum Colour anodized section frame main

outer size 127mm x 38.10mm x 1.35mm @wt.

1.384kg/m, horizontal Four track member size

kg/m, vertical member of size 122.20mm x

31.75mm x 1.50mm @1.398 kg/mt with sliding

134 shutters of horizontal member size 40mm x 5 2,140.33 S.M.

18mm x 1.29mm@ 0.456kg/mt ,vertical member

of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt

with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for

(A) Same as above but Colour anodized 5 2,140.33 S.M.

Providing and fixing window having extruded

aluminium Powder Coated section frame main

outer size 95 mm x 24 mm x 1.17 mm (of jindal

section no:2459 @ Wt. of 0.738 Kg/mt),

horizontal Three track member size 92 mm x

31.75 mm x 1.30 mm (of jindal section no;8688,

@ Wt. 1.07 Kg/mt), vertical member of size

mm x 31.75 mm x 1.50 mm (of jindal section

no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters

of horizontal member size 40 mm x 18 mm x

mm (of jindal section no:8947 @ wt. of

kg/mt), vertical member of size 40 mm x 18 mm x

1.29 mm (of jindal section no:8949 @ wt. of

kg/mt) with 5 mm thick transparent bronze

colour tinted float glass with powder coated

aluminium fittings & fixtures and transparent

silicon sealant glass fixing to frame as per details

(A) Same as above but Colour anodized 5 1,591.87 S.M.

SN ITEM Qty Unit Total

Providing and fixing window having extruded

aluminium Powder Coated section frame main

outer size 63.50 x 38.10 x1.95 mm (of Jindal

section no.4605, @ Wt. 1.094Kg/mt) horizontal

Two track member size 61.85 mm x 31.75 mm x

1.20 mm (of jindal section no:8687, @ Wt.

0.695 Kg/mt.) vertical member of size

31.75 mm x 130 mm (of jindal section

no:8758 @ wt. of 0.659 kg/mt) with sliding

shutters of horizontal member size 40 mm x18

mm x 1.29 mm ( of jindal section no:8949, @

Wt. of .456 Kg/mt) vertical member of size

mm x 18 mm x 1.29 mm (of jindal section

no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @

Wt. of 0.457 Kg/mt) with 5 mm thick tranparent

bronze colour tineted float glass with powder

coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as

per details etc. complete for window.

(A) Same as above but Colour anodized 5 1,705.67 S.M.

Providing and fixing standared extruded

ofalluminium section of size 63mm x

38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with

colour Powder Coated alluminium frame for

ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

(A) Same as above but Colour anodized 5 2,414.00 S.M.

Providing and fixing standared extruded of

aluminium section of size 61 x 37.0 x0.90 mm (of

Jindal section no.14080, @ Wt. 0.471 Kg per

138 mt) with Powder Coated alluminium frame 5 2,336.00 S.M.

with 5 mm thick transparent bronze colour

tinted float glass as details etc. complete for fix

(A) Same as above but Colour anodized 5 2,336.00 S.M.

SN ITEM Qty Unit Total

Providing & fixing partly panel & partly glass

Powder Coated Aluminium doors with

aluminium section of Hindalco, Jindal

Narmada,Banco or Equivalent approved make

having Poder Coated outer frame Leg

Partition section of 63.50 mm x 38.10 mm

having weight 1.158 kg. / R.M. shutter section

having size 83.5 mm x 44.45mm ( top & bottom:

139 1.384 kg./rmt. and middle 1.139 kg./rmt.) door 5 3,237.00 S.M.

vertical 47.62mm x 44.45 mm ( vertical:0.881

kg./rmt. & top hing side:0.974 kg./mt.), Glazing

Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.)

with 5mm thick sheet glass in acid frogting and

mm thick prelaminated sheet of Greenlam,

Panama or archid make as approved by Engineer-

in charge including fixing brass pivot, handle, lock

(A) Same as above but Colour anodized 5 3,237.00 S.M.

Providing & fixing Powder Coated Aluminium

partly glazed and partly panelled partition

using medium duty sections of

Hindalco,Zindal, Narmada, Banco or Equivalent

approved make having section 63.50 mm x

38.10mm ( Frame-.758 kg/rmt & Middle section-

0.819 Kg./rmt), Galzing Clip with 5 mm thick

clear float glass of approved make including all

other necessary fittings and fixtures. Entire work

will have to be made water proof using necessary

rubber sectioned wherever required. Gaps all

round the frame to be filled with approved water

proof sealent. Bottom portion of doors both side

to be covered with 12mm thick prelaminated

particle board of approved make and quality and

(A) Same as above but Colour anodized 5 2,400.00 S.M.

Demolition including stacking of serviceable

141 materials with all 2 1,057.47 C.M.

lead and lift. (i)) RCC Work

Demolition of brick work and stone masonry

including stacking of serviceable materials and

disposal of unserviceable materials with all lead

and lift. (i) On Cement Mortar.

Removing and scraping of old deteriorated plaster

of any thickness from wall / RCC member

143 including stacking of serviceable material and 10 19.57 S.M.

disposal of unserviceable from site

of work with all lead and lift.

Dismentling steel work including distempering

144 and stacking 10 3.67 Kg.

the maerials with all lead and lift.

SN ITEM Qty Unit Total

Dismentling door, windows, ventilators etc. (wood

or steel) shutters including chowkhats architraces,

145 holdfasts and other attacement etc. complete and 2 187.71 EACH

stacking them within all lead and lift. (i) Not

exceeding 3 Sq.M. in area.

Dismentaling of sheet roofing inlcuding ridges,

Hips, Valleys, Gutters etc. stacking of serviceable

materials and disposal of unserviceable materials

with all lead and lift. (i) G.I. sheet roofing.

147 Removing of Collapsible Gate 1 1,500.00 No.

148 Removing of Rolling Shutter 1 1,000.00 EACH

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead

A Kota stone flooring and steps 5 47.72 S.M.

B Marble 5 47.72 S.M.

C Tiles flooring / Dedo 5 47.72 S.M.

D Granite flooring and steps 5 47.72 S.M.

Providing & filling with Mix soil in layers of

150 cm. Th'. Incl. watering, 10 206.00 C.M.

ramming & consolidation etc. complete.

Supplying & filling fine sand(pana) in 75 mm /

100 mm / 150 mm compacted thickness over the

base including necessary compaction, watering

etc. complete. Item includes leveling by using

vibratory plates compacted machine and as

directed by engineer in charge.

Providing and laying cement concrete 1:5:10 (1-

Cement : 5- Coarse sand : 10- hand broken stone

152 aggregates 40 mm nominal size) and curing 2 2,517.44 C.M.

complete excluding cost of formwork in (A)

Foundation and Plinth

Providing 100mm thick readymade C.C. kerb of

strength M-20 (size 300mm x 380mm) purchased

from SMC's approved paverblock manufacturer &

setting in line, level and in truly vertical position,

153 including filling joints in C.M. 1:1 (1 part of 50 228.00 R.M.

cement : 1 part of stone dust) smooth pointing in

C.M. 1:1 (1 part of cement : 1 part of coarse sand)

including watering etc. complete and

as directed by engineer in charge.

Providing interlocking type Rubber moulded

cement concrete paver block of approved

shape, design & colour having 60mm thickness (M-

35) purchased from SMC's approved paverblock

manufacturer only & fixing of fine sand bedding.

Item includes levelling by using vibratory plates

compacted machine. Item also includes all

materials, labour, equipments, tools, plants,

watering, cleaning etc. complete.

SN ITEM Qty Unit Total

Without colour 5 524.00 S.M.

Providing & laying Granular sub base

(GSB)confirming to Grading-V of Table 400.0 of

compacted thick of 150mm with specified graded

stone metal and sand mixed in place and laid

with mechanical means spreading with motor

grader and compacting with vibratory roller

having minimum 80-100 KN static weight to

acheve desired density of 98% of MDD

including all material, labour, machinery with all

leads and lift etc. complete.

Providing & laying cement concrete Pavement

using 1:1.5:3 (1 cement:1.5 sand:3 graded stone

156 agg. 20 mm nominal size) & Vaccuum 5 5,981.00 C.M.

Dewatering technique including floating surface

with a skim powder floater, curing etc. complete.

Providing & laying cement concrete Pavement

using 1:2:4 (1 cement:2 sand:4 graded stone agg.

157 20 mm nominal size) & Vaccuum Dewatering 5 5,245.25 C.M.

technique including floating surface with a skim

powder floater, curing etc. complete.

Providing and laying 200 micron plastic sheet

on prepared sub base For V.D.S Concrete

Cutting of Groove 5 to 7 mm thick in VDS for

159 depth 1/3 of total thickness with filling of epoxy 10 50.00 R.M.

sealent as directed by engineer in charge

RCC Core Cutting is about making precise, circular

cuts for creating holes of required diameters for

Rehabilitation in civil works. The core drilling rod

is fitted with diamond pieces at the drilling end.

The core cutting machine can be used for both

horizontal and vertical hole making purposes.

Providing and fixing eco-friendly light

weight calcium silicate false ceiling tiles having

Tegular edge & 15 mm Thick Densified edges

on the Tile Periphery for Extra Strength The

Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-

combustible as per B.S. 476 part IV, 100%

humidity resistance and also having thermal

161 conductivity0.043° w/m KC.for the best thermal

Insulation . The Light weight calcium Silicate

tile shall be of approved texture Fine

fissured/ Spintone/Cosmos having NRC value

of 0.5 & Globe having NRC value of 0.75 NRC

or equivalent of size 595 X 595 mm to be laid on

true horizontal level suspended inter locking

metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm

SN ITEM Qty Unit Total

162 GYPSUM CEILING 50.00 958.58 Sqm.

Supplying and Fixing of Suspended ceiling system

components which includes Single Layer Boarding

with 12.5mm thick USG Boral Standard

Plasterboard This includes of USG Boral

Thundersteel Perimeter Channel (0.50mm thick

having one flange of 20mm and another flange of

30mm and a web of 28mm) screw fixed to brick

wall/partition with the help of approved screws

at 600mm centers. Then suspending of USG Boral

Thundersteel Intermediate channel (45mm x

0.90mm thick with two flanges of 15mm each)

from the soffit at 1220mm centers with of USG

Boral Thundersteel Ceiling Angle

(25x10mmx0.50mm thick) fixed to RCC Slab with

of USG Boral Soffit Cleat (37x27x25x1.6mm thick)

and 8mm dia 40mm long Anchor Fastener @

600mm Centers, respectively. USG Boral

Thundersteel Ceiling Section (having web of

mm and two flanges of 27mm each) are then fixed

to the of USG Boral Thundersteel Intermediate

channel with the help of connecting clip (2.6mm

Dia) and in perpendicular direction to the USG

Boral Thundersteel intermediate channel at

457mm centers. USG Boral Thundersteel profiles

are rolled with AZ Steel (150 GSM & 310 MPa

Yield Strength) having base metal conforming to

163 CEMENT SHEET CEILING 50.00 1248.00 Sqm.

Providing and fixing of Cement sheet ceiling using

aluminium channel & pipe, screws etc. complete

with all material, labour with all lead, lift and

transport. and finished by approved shade of

plastic paint (Basic Rate for 8 mm plain cement

sheet : 35 rs./sqft.)and finished and complete the

work satisfactorily as per instruction of architect

or Engineer-in charge And as per " Architecture"

Providing and fixing

(A) 40 mm thick RCC cover for simple

chamber,s.w.trap & tank Top

(B) PVC water tank cover upto 2000 Lit. 5.00 200.00 No.

Providing and Replace door, Window S.S. Fixtures

fix in wooden / Alluminium door - window

(A) S.S. Stopper 60 Cm long of ASIS 304 5.00 363.77 No.

(B) S.S. Stopper 30 Cm long of ASIS 304 5.00 182.32 No.

(C) S.S. Stopper 20 Cm long of ASIS 304 5.00 127.53 No.

(D) S.S. Aldrop 20 Cm long of ASIS 304 Grade 5.00 218.26 No.

(E) S.S. Aldrop 25 Cm long of ASIS 304 Grade 5.00 327.83 No.

(F) S.S. Aldrop 30 Cm long of ASIS 304 Grade 5.00 400.58 No.

(G) S.S. Handle for door/ window 10 Cm size of

165 ASIS 304 Grade

(F)S.S. Handle for Door 15 Cm size of ASIS

SN ITEM Qty Unit Total

(I) S.S. Pipe Handle for door 30 Cm size o ASIS

(J) Inter Lock [Kadaka lock] 5.00 209.71 No.

(H) Locks Godrej Mortice lock cover 5.00 329.63 No.

(I) Door closers arrow type with spring 12 length

as approved sample (30 cms)

(J)Handle for doors Windows Cupboards etc.

Brass 15 cms. Length

(K) S.S. Door / window hinges 4x1"x1" 5.00 54.78 No.

Providing & fixing water proof plywood (ISI

marks 710 grade) at the door,window and any

space in the building. necessary hardware,screws

materials etc. complete as per instruction by

engineer in charge.

Providing & laying Non reflective solar contact

film for fixing on glass as approved

colour,design,cutting complete as per instruction

by engineer in charge.

Providing & fixing Glass Table Top using 08mm

th.clear glass with crystal edge & necessary

hardware materials etc. complete as per

instruction by engineer in charge.

Removing & resetting existing readymade c.c.

kerb stone of required size & thickness in line

.level and in truly vertical position including

filling joints in C.M. 1:1 (1 part of cement : 1 part

of stone dust) smooth pointing in C.M. 1:1 (1 part

of cement : 1 part of coarse sand) including

watering etc. complete and as directed by

engineer in charge. (M.R)

Removing and Resetting of Paver block of walk-

way with necessary sand / pana filling and make

in line and level with necessary vibrating using

compactor machine.

Providing and fixing hard drawn steel wire fabric

75mmx25mm mesh or weight not less than

kg.per Sq.M. to window frames etc. including 60x

20mm beading of teak wood.

Providing & fixing G.i mesh 25X25X3mm used for

celling repair fixed with celling rebar column as

per directed by enginner incharge rate excluding

the rebar cost .

SN ITEM Qty Unit Total

Providing and filling the expansion joint by

polymer confirm to BS4254-1983 as per required

shade and specification by making groove of

mmx12.5mm lather by cutting or by repairing

groove and removing mortar dropor anyother

foreign materials including applying primer and

filling required size (over size of joint PU foam etc.

Cutting out cracks of roof terrace to V- section

174 , cleaning out, wetting , grouting with cement 10 65.23 Rmt

and sand slurry 1:3 (1-cement 3-sand )

Cutting out cracks roof terrace to V-Section

cleaning out and filling solidly with a hot

mixture of bitumen and clean dry sand (1:1 by

Anti-Termite System:Providing and laying

of permanent piping technology anti-

termite treatment before flooring work by

installing LLDP (Low linear density

polyethylene) tube of 8 mm O.D. & 6.4 mm

1.D. with inbuilt pressure compensation chip

every 30 cm interval in the tube, having

working pressure of 2 Kg/cm2 and release rate

176 of 1.9 Itr/hour fixed by P-clips and nails. The 20.00 134.33 S.M.

LLDP pipe shall be installed at the entire

periphery of the building and at internal

network of building at a depth of 20 to 200 mm

under floor at every 2 to 3 mtr. c/c distance

(adjusted as per building layout ) & Ends of

loop pass through a PVC elbow of minimum

mm ID at junction box of wall and floor level,

entering into a steel reinforced grooved

flexible pipe of minimum 22 mm ID leading

Providing & fixing Aluminium Composite panel of

Alum Decor, Indobond & Flexibond make to all

sufaces . 4mm thick in required colours of exterior

consisting of two layers of aluminium skins of

0.25mm thick sandwiching a thermo plastic core

in continuous lamination process with PVDF

coating of exterior grades ensuring long life colour

177 and fungal resistance .Base frame work with 50.00 220.00 Sq.ft

aluminium sections shall be fixed over the all

surfaces,ACP shall be fixed to the frame work as

cladding it includes cost of labour ,Materials

,accessories ,adhesive ,scaffolding ,wastages

,transport , taxes, fixing into a neat finish in

aesthetic point of view, without any undulations

in facias all complete as per drawing and

instruction of engineer in-charge.(M.R)

SN ITEM Qty Unit Total

Providing and applying textured plaster as per

design of ICI Dulux or of Asian

paint as per manufacturers specification and

directions in shade and colour

178 approved by architects, on exterior surfaces of the 50.00 538.00 S.M.

building including

scaffolding, preparing the surface, watering,

curing etc. complete and as

directed by the architects and manufacturers.

Providing and laying and fixing 50 mm thick

expansion joint by hydro cell semi

rigid UV resistance with high performance

laminated closed cell polythene

foam joint filler in sheet foam as directed, etc.

complete. R&B SOR, Pg No.57 ,Item no.-5048

Total Amount :-

Total Amount :-

EXECUTIVE ENGINEER

NEW EAST (SARTHANA) ZONE

SIGNATURE OF CONTRACTOR SURAT MUNICIPAL CORPORATION