NIT NO. 08 ITEM NO. 23

S/o Horizontal split casing Centrifugal pump model UP150/38/ equivalent pump fitted with impeller (LG2) and neckring (BB) and casing (CI) shaft and sleeve (SS-410) in fitted condition with suitable bearings along with IE2 rating TEFC motor. The pump and motor coupled on M.S. Base frame with coupling and coupling guard. Duties of Pump: Head– 38-40 mtrs, Discharge:- 300-450 m3/hr. , Eff:- 85%, RPM-1485, Suction/Delivery Size – 200mmX150mm Motor ratings:-60 HP, Pole:-4, RPM:-1450-1500 rpm Make of pump: Wilo and Mather+Platt./ equivalent in KBL / DJB approved make, Make of motor:- CG/ABB/ Kirloskar/ DJB approved make ( 01 + 01 set spare)

Supply of suitable automatic ATS starter for the above motor including all electrical items required for installation of this starter with motor. Rating for starter : atleast 100 HP. Make: L&T/ Schneider/ Advance/ DJB approved make ( 01 + 01 set spare)

Supply of M.S. Pipe 200 mm B class make Jindal / tata

Supply of M.S. Pipe 150 mm B class make Jindal / tata

Supply of 150 mm CI NRV of PN 1.6 make- Kirloskar/IVC/DJB approved

Supply of 200 mm non rising sluice valve of atleast PN 1.6 make- Kirloskar/IVC/DJB approved

Supply of 150 mm non rising sluice valve of atleast PN 1.6 make- Kirloskar/IVC/DJB approved

Supply of foot valve 200 mm make Kirloskar/IVC/DJB approved make

Supply of M.S. Flange 200 mm dia heavy duty holes as per site requirement.ISI/Jindal/DJB approved make

Supply of M.S. Flange 150 mm dia heavy duty holes as per site requirement.ISI/Jindal/DJB approved make

Supply of M.S. bend of 200 mm dia, 900 heavy duty.

Supply of M.S. bend of 150 mm dia, 900 heavy duty.

Providing/Fixing of S.S. pressure gauge having range 0 to 100 psi and 150 mm dia including pipe fittings, bib cock etc. Make: H Guru, Fibeg, DJB approved make

Making of new C.C. foundation with suitable ratio of gravels, sand and cement as per standard size suitable for above p/set i/c complete finishing etc. as required.

Supply of neoprene rubber packing sheet as per site requirement. ISI marked

Supply of M.S Nut bolts washer as per site requirement.ISI marked

S/o single core 95 sq mm copper wire make- Havells/KEL/DJB approved

Installation of the above new starter including fixing of starter at proper base as per directions of engineer in charge, making proper electric connections to the motor and panel as required while taking all safety precautions including any minor civil work required complete with proper finishing

Cleaning the surface of pipe, specials, valves etc, with wire brush and ambry paper and painting the complete installation with two or more coats of synthetic enamel paints after a coat of steal primer.

Installation of above 60 HP motor and pump along with the MS base frame on CC foundation, the job i/c installing and fixing reducers on both sides, fixing with proper alignment, cartage , taking all safety precautions arranging all tools & tackles etc. and fixing of coupling guard and connection the motor from panel / starter, Consumable items, testing and commissioning the pump set after checking the system both electrical and mechanical on full load in the supervision of engineer in- charge at site. This is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid.

Testing and commissioning of above newly installed system, at no load and at full load, while taking all safety precautions and as per satisfaction of engineer in charge

Cartage/Shifting the pump & motor from tempo to pump house base frame with mannual heavy labour

Raj Engineering Co.

Goodwill Enterprises

CHANDERA BUILDERS