REPAIRS TO KITCHEN AND TOILETS CUM BATH INCLUDING INTERNAL WATER SUPPLY, SANITARY/BATH FITTINGS, SUNKEN FLOORS ETC AND MISC CONNECTED WORKS IN CERTAIN MD ACCNS IN MIL STN JAMNAGAR

Amount

Demolition of cement concrete (un-reinforced) in any position not otherwise specifically provided complete all as specified and as directed by Engr-in-charge.

M&L filling PCC type D2 1:5:10 (40 mm graded stone aggr) as in sunken floor after applying appropriate treatment to side walls complete all as specified and as directed by Engr-in-charge.

M&L 15mm thick rendering in cement plaster 1:3 with WPC on vertical sides of sunken floor incl finished even and smooth w/o using extra cement complete all as specified and as directed by Engr-in-charge.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded mixed with liquid water proofing compound @ 0.200 litre per bag of 50 Kg of cement in bottom of sunken floors

M& L complete preparation of efforescence or wetted internal wall surface using wire brush to remove all the loose laittence & wash with clean water and applying crack filling as directed on site wet the wall prior to over coating brush apply 1 primer coat of Dr fixit Primeseal & allow to dry for 4 hours , apply damp proof coating Dr fixit Damp guard, Blend a mixture of Dr Fixit damp guard & water in the ratio 1:1:1(Base: Hardner: Water) & brush apply 2 coat over the plastered surface in a span of 4 hrs, over coat of walls with the suitable protective (decorative) coating complete all as specified and directed Make : Dr Fixit or techno commercially Equivalent product complete all as specified and as directed by Engr-in-charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.complete all as specified and as directed by Engr-in-charge.

M&L Non skid Ceramic coloured Joint free tiles of 7-8mm thick (area of each tile exceeding 0..06 Sqm but n.exc. 0.11 Sqm) as in floor set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 15mm thick bedding layering cement mortar (1:6) complete all as specified and directed by Engr-in-charge.

M & L for Glazed ceramic tiles, coloured (light colour as approved), of size 450X 350X 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:3) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-charge.

M&L 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, incl 20 mm thick screed bed in CM 1:6 all as specified and as directed by Engr-in-charge.

Moulding to Granite(single or double) slab including rounding off edges for 20 mm thick slabs including grinding and polishing

M&L Machine cut kota stone slab 20-25mm thick as in vertical partition, pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc. all as specified and as directed by Engr-in-charge.

M&L 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement plaster 1:6 on fair faces incl finished even and smooth w/o using extra cement all as specified.

M&L for rendering 5mm thick in CM 1:3 on concrete surfaces in ceiling including finishing even and smooth without using extra cement

M&L for rendering 15 mm thick in CM 1:4 on the external surfaces of brick work/Stone or concrete surface finishing fair and even without using extra cement.

Preparation of newly plastered surfaces of wall incl sweeping clean with brush to remove loose dust, sand, etc and applying two coats of heavy duty waterproofing coat (Dr Fixit Wounderproof-1 or techo commercial equivalent product of specified make) by mixing water @ 25-30% to make slurry coating and allow 4 to 6 hrs time for drying up of first coat before application of second coat in perpendicular direction of first coat and further left to dry for 4 hrs (APP Membrane :- STP Ltd/ Texsa India Ltd/ IWL Ltd/ Tiki Tech/ Asian & Waterproofing Chemicals:- M/S ChokseyChemicals,M/S AppurvaIndia Ltd,Bostick India Ltd,Stp Ltd, M/s Maruti) complete all as specified and directed as per manufacturer instructions all as specified and as directed by Engr-in-charge.

M&L Preparation of newly plastered surfaces of walls and applying three coats of white wash on wall all as specified and as directed by Engr-in-charge.

M&L Preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling all as specified and as directed by Engr-in-charge.

M&L Preparation of newly plastered surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Supply, lay, connect and test GI tubing ,medium grade with all fitting, laid in trenches, or fixed to walls with clamps, floors, ceiling or laid in trenches etc. complete of 15mm bore , fixed in repairs complete all as specified and as directed

Supply, lay, connect and test GI tubing ,medium grade with all fitting, laid in trenches, or fixed to walls with clamps, floors, ceiling or laid in trenches etc. complete of 20mm bore, fixed in repairs all as specified and as directed by Engr-in-charge.

S&F fixed in repairs Vitreous China wash down water closet (Pedestal pattern) white with concealed S-Trap/P-trap, 360mm wide, 390mm high and 415 to 445mm long at top including fixing bolt, Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete, , all as specified and as directed by Engr-in-charge.

S&F in repairs counter sunk Vitreous china wash basin (560x410x180mm), white including mounting on granite slab 20mm thick brass chromium plated perforated waste coupling/fittings 32mm dia with long screwed shanks and fly nut, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and suitable length all as specified

S&F fixed in repairs Vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets excluding taps, waste, chain and plug and porcelain stopper but including chromium plated brackets, restoring all connections, all as specified and as directed by Engr-in-charge.

S&F 10 litre capacity low level PVC flushing cistern (white), PVC low level flushing cistern 10 litres capacity valve less symphonic action type, ISI Marked white with inlet, ball valve, float and handle including brackets, fixed in repairs all as specified and as directed by Engr-in-charge.

S&F in repairs Brass CP Wall Mixer 3 in 1 system, for mixing hot & Cold water with provn.of both hand shower and overhead shower complete with 115mm long bend pipe and wall flange(without hand and overhead shower), all as specified and as directed by Engineer-In-Charge. Model Jaquar COP-CHR-119PM or eq model of make specified

S & F in repairs Fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch screwed down fixed in repair / replacement complete all as specified and directed. Make: Jaquar Model No. CON-107KN or equivalent model of make specified in Appx 'B' herein before.

S&F in repairs Central Hole Basin Mixer, cast copper alloy,chromium plated, including taking down old unservicable one, all as specified and as directed by Engineer-In-Charge. Model Jaquar CON-CHR-167KNB or eq model of make specified

S&F in repairs angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.(Make: Prayag,Jaquar,Cera or equivalent make specified)

S&F in repairs Brass chromium plated shower rose 100 mm size along with 190mm long shower arm casted and 15mm dia with swivel joint and arm including fixing to steel pipe or union complete fixed in repairs, all as specified and as directed by Engr-in-charge. Make: Jaquar Model No. OHS-1789 & SHA-477 or equivalent model of make specified in Appx 'B' herein before

S&F in Repairs Soap dish fancy type all as specified and as directed by Engineer-In-Charge. Cat No ACN-1131N of Jaquar or eq model of make specified

S&F in Repairs Toilet paper holder fancy type all as specified and as directed by Engr-in-charge.

S&F in Repairs Glass shelf 300mm with bracket complete all as specified and as direcetd.

S & F in repairs PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent etc. making good floor with matching specifcation all as specified and as directed by Engineer-In-Charge.

S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors.

S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors.

S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal specified and directed by Eng-in-charge

S&F in repairs PVC(SWR) bend any radius, 110 mm dia.provided with access door specified and directed by Eng-in-charge

S&F in repairs PVC (SWR) junction double, (double T), equal or unequal provided wit access door specified and directed by Eng-in-charge

S&F 500ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm PTMT ball/float valve, fixed in repair all as specified and as directed by Engr-in-charge.

S&F 1000ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm PTMT ball/float valve,fixed in repair all as specified and as directed by Engr-in-charge.

S & F vitreous china squatting Pan “ Orissa” Pattern , of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and as directed by Engr-in-charge.

Demolition of RCC in any description and in any position not other wide specifically provided reinforced (reinforcement of cut as required to facilitate demolition etc) incl removal of demolished materials out side of MD land complete all as specified and directed.

M &L RCC 1:1.5:3 type A1 using 20 mm graded aggregate as in slabs supported on wall as kitchen platform etc. complete all as specified and directed by Engr-in-charge.

S & F TMT steel deformed or twisted bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips.

Use and waste of formwork to soffits of suspended slabs and similar works n. exc 200mm thick (horizontal or sloping) with fair finished surfaces of concrete in flat.

S&F Coloured Vitrified tiles 10 mm thick (square/rectangular) polished area of each tiles n exc 0.36 sqm in floors & skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match in light shade including 20mm thick screed bed in CM 1:6

Demolition of brick work/stone masonry/block Masonry built in cement mortar of any description

M&L for brick work with sub class 'B' Half brick thick, old size built in cement mortar in CM (1:4) straight or curved on plan, complete all as specifiedand as directed.

M/s Jagdish Machinery Stores

VINUBHAI P. CHANDRA

S H CONSTRUCTION