REPLACEMENT OF HEPA FILTERS FOR DIFFERENT OTS AND COMPREHENSIVE MAINTENANCE OF OT LIGHTS AT CHAF BANGALORE

Amount

Comperenensive maintainence and servicing of followig mentioned OT Light fittings including control Panel including all connected items and carrying out routine check OT lights for smooth functioning all as per manufacturer' instructions and entire satisfaction of engr-in-charge as directed. Notes for (a) to (g) mentioned below :- (i) Unserviceble spares which are required to be replaced shall be measured and paid seperately under relevants items of schedule 'A' (ii) Authorized personnel should repair the unit. (iii) Clean the light housing and arm using mild soap and water mixture. Apply this mixture to a clean microfibre cotton cloth and wipe down the light head and arms (iv) Check front lens and optics to assure there are no chips, cracks, or other (v) Check to see that all mounting and attachment screws, washers, etc. are in place and securely tightened. Replace any missing screws and retighten as required. (vi) Ensure that casters are seated properly on the base assembly of OT lights (vii) Check to make sure all moving joints function properly along the mounting system and head and arm system of OT Light fittings (viii) Contractor will maintain a monthly record of servicing duly sighned by user and the concerned JE E/M (x) All the tools/microfibre cotton cloth/ cleaning material will be provided by contractor only

(a) OT-I (Two Lights)

(b) OT-II (Two Lights)

(c) OT-III (Two Lights)

(d) OT-IV (Two Lights)

(e) OT-V (Two Lights)

(f) OT-VI (Two Lights)

(g) OT-CTVS (Two Lights)

S & F inreplacement Switching mode power supply, including installation,testing ,serviceability,complete all as specified and as per existing Make KLS Martin/Germany

S & F inreplacement Reusable sterile handle, including installation,testing ,serviceability complete all as specified and as per existing Make : KLS Martin/Germany

S & F inreplacement Lower glass assembly, including installation,testing ,serviceability complete all as specified and as per existing Make: KLS Martin/Germany

S & F inreplacement Control Electronic from HWOOBoard, including installation,testing ,serviceability complete all as specified and as per existing Make Cat No 08-659-33-04-Model, KLS Martin/GermanyV10/V16)

S & F inreplacement Cabling and wiring ,complete all as specified and as directed

S & F inreplacement LED Light Engines, including installation,testing ,serviceability complete all as specified and as per existing Make.(Model V10/V16)KLS Martin/Germany

M & L for repairs to operation theater lighting system of Burns OT,Mortury OT,Gynec OT-I,II,,Labour OT and Minor OT including cleaning ,painting,cheking to ensure serviceablity to the entire satisfaction of the engineer-in-charge all as specified and as directed. Note:-(i) Unserviceble spares which are required to be replaced shall be measured and paid seperately under relevants items of schedule 'A' (ii) Clean the light housing and arms using mild soap and water mixture with clean microfibre cotton cloth and wipe down the Minor & Major lights,glass assembly, and check arms of all moving joints are funtioning properly by Authorised personnel only. (iii)) Check to see that all mounting and attachment screws, washers, etc. are in place and securely tightened. Replace any missing screws, Nut,bolts, and retighten as required.

S & F of rotary switch model CL-02 of OT light fittings in repairs all as specified and as directed, Make :Phillips,Macflav

S & F of OT light fitting in repair above but condenser model CL-02Make :Phillips,Macflav

S & F of OT light fitting in repair above but transfoemer for CTV model CL-02Make :Phillips,Macflav

S & F of OT light fitting in repair above but lamp holder assemblyMake :Phillips,Macflav

S & F of OT light fitting in repair above but lamp holderMake :Phillips,Macflav

S & F of OT light fitting in repair above but rotatory switch model CL-01Make :Phillips,Macflav

S & F of OT light fitting in repair above but on/off switch CVTMake :Phillips,Macflav

S & F of OT light fitting in repair above but rotatory switch CVT model CL-02Make :Phillips,Macflav

S & F of OT light fitting in repair above but condenser model CL-01Make :Phillips,Macflav

S & F of OT light fitting in repair above but transfoemer for CTV model CL-01Make :Phillips,Macflav

S & F of OT light fitting in repair above but glass reflector by any model Make :Phillips,Macflav

S & F of OT light fitting in repair above but MCB CL-01/4/5/7/10Make :Phillips,Macflav

S & F of OT light fitting in repair above but MCB CL-2/6/8Make :Phillips,Macflav

S & F of OT light fitting in repair above but filter glass assembly porcelain connector with mobilux Make :Phillips,Macflav

S & F of OT light fitting in repair above but diode block model CL-10Make :Phillips,Macflav

S & F of OT light fitting in repair above but toughened glass standard/major/minor. Make :Phillips, Macflav

S & F of OT light fitting in repair above but change over relay model CL-10Make :Phillips,Macflav

S & F of OT light fitting in repair above but change over relay model CL-05/7Make :Phillips,Macflav

S & F of OT light fitting in repair above but change over relay model CL-6Make :Phillips,Macflav

S & F of OT light fitting in repair above but screw kit for OTL any model

S & F of OT light fitting in repair above but contact plate square/oblong any model

S & F of OT light fitting in repair above but shadowless bulb 12v 50w,2000hMake :Phillips,Macflav

Material & Labour for Enamel Metallic painting,after scraping the old corroded paint with emry paper,& with a coat of anti-corrision paint on O.T light fitting including connected accessories complete to the entire satisfaction of engr-in-charge as specified and directed.

Supply install tesing and commisssioning inreplacement Hepa filters frame with CRCA Steel casing with epoxy powder coated/Aluminium of imported micro fibre glass media with efficiency 99.97 down to 0.3 micron of size 915x610x150mm including taking down unserviceable one all as specified.(Half yearly 2x26Nos=52 Nos)

All as per Item no 1 but of size 610x305x150mm.(Half yearly 2x10Nos=20 Nos)

All as per Item no 1 but of size 610x610x150mm(Half yearly 2x2Nos=4 Nos)

Supply and fix inreplacement Discharge filter,5 micron,of suitable size for AHUs of different locations of 2x120TRall as specified and directed.

Supply and fix inreplacement Suction filter,10 micron,of suitable size for AHUs of different locations of 2x120TR all as specified and directed.

Supply and fix inreplacement Suction filter,10 micron,of suitable size approx hight 4" and length 2" for AHU of 3x20TR all as specified and directed.

G.L.THIRUMALAI NAIDU AND COMPANY

RRK PROJECTS