WBPWD/EE/PED/NIQ36 /2025-2026

Electrical Installation Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] [E-15/5]

Average run 8 mtr [E-15/5(c)]

On Board [E-15/4(a)]

Separate Board 2x5A Switch and Socket Average run 6 mtr [E-15/4(e)]

Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E-7/28]

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board\ andbakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-6/22]

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.(D12/17)

Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A, TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 32 A TPN/FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.(D12/18)

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-17/5(a)]

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections. [E-17/5(b)]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-19/17]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(D9)

2+12 way Enclosure (607712) L&T/Legrand/Scimens) (D9,13)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

4 way Make:-L&T/Legrand/Scimens) Enclosure (LTTD04N) [D-11/14]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [NS]

4 way Up to 160A Make:-L&T Enclosure (LTVD04MGN) (D12/15)

6 way Up to 160A Make:-L&T Enclosure (LTVD06MGN) (D12/15)

8 way Up to 160A Make:-L&T Enclosure (LTVD08MGN) (D12/15)

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl.painting,connection & provision for earthing attachment

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection.

63 A FP Make:-L&T [D-5/6]

40 A DP Make-L&T [D-5/6]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

63 A FP Make:-L&T [D-6/7]

16 A FP Make:-L&T [D-6/7]

63 A TP Make:-L&T [D-6/7]

32 A TP Make:-L&T [D-6/7] VTPN

16 A TP Make:-L&T [D-6/7]

25 A SP Make:-L&T [D-6/7] for AC

10 A SP Make:-L&T [D-6/7] for comp Point

6 A SP Make:-L&T [D-6/7]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection [D-8/10]

200 A Make-L&T[ D-8/10]

160A Make-L&T[ D-8/10]

125 A Make:-L&T [D-8/10] for AC VTPN

100 A Make:-L&T [D-8/10]

Supply of 1.1 KV Gr.PVC/Al./A. Cable Make (Gloster / Polycab / Havells)

2 core 6 sqmm [NS] for Street Light

4 core 16 sqmm cable [NS] for HTPN & 3-Ph Line

4 core 35 sqmm cable [NS] for VTPN

4 core 95 sqmm cable [NS] from main panel to Gr flr Sub panel

4 core 185 sqmm cable [NS] from main panel to Wrokshop Building Panel

4 core 240 sqmm cable [NS] from New panel to Existing Panel(Double Run)

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [F-1/2(a)]

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [F-1/2(b)]

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting [F-1/2(c)]

Laying of two cables above 35 sqmm and upto 185 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed[F-2/2(b)]

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed. [F-2/1(b)]

Laying of two cables above 185 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. [F-2/2(c)]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : [F-4/7]

for 2 core 6 sqmm [F-4/7(c)]

upto 4 core 16 sqmm [F-4/7(c)]

upto 4 core 25 sqmm [F-4/7(c)]

upto 4 core 50 sqmm [F-4/7(c)]

upto 4 core 95 sqmm [F-4/7(c)]

upto 4 core 185 sqmm [F-4/7(c)]

upto 4 core 240 sqmm [F-4/7(c)]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

2 core 6 sqmm cable [F-5/8(b)(ii)]

4 core 16 sqmm cable [F-5/8(b)(xii)]

4 core 25 sqmm cable [F-5/8(b)(xiii)]

4 core 50 sqmm cable [F-5/8(b)(xvi)]

4 core 95 sqmm cable [F-5/8(b)(xviii)] 4core /3½ core

4 core 185 sqmm cable [F-5/8(b)(xxi)] 4core /3½ core

upto 4 core 240 sqmm [F-5/8(b)(xxii)] 4core /3½ core

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy.fittings as required [E-14/1(a)]

3 x 22/0.3 (1.5 sqmm) [E-14/1(a)i]

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC [E-14/1(a)ii]

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC [E-14/1(a)iii]

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC [E-14/1(a)iv]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works [E4/11]

150 mm x 100 mm x 65 mm[E4/11b]

240 mm x 200 mm x 65 mm[E4/11e]

Supply of 4' 18 W 2100 Lumens T8 Master LED tube light(Make:- Philips Mas LED tube 18W 865 T 8 I-2100lm )

Supply of 48" sweep A.C. ceiling fan complete with all accessories. (Make: Usha /Orient/Crompton ) [ NS]

Supply and fixing 450mm striker plus (safety wire & P2 capacitor) wall mounted fan fully metal Body . (Make:-Orient- Tornado Wall- II/Crompton/Usha) [NS]

Supply of 45W LED Street light (Make:Crompton/Philips/ Bajaj/ Havells)

Supply of 70W LED Street light (Make:Crompton/Philips, Bajaj/ Orient)

Fixing only LED street light fitting incl necessary accessories on arm bracket.

Suply & Fixing 2.5 MFD Fan Capacitor.(Tibcon)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [C-3/21(a)]

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required[C2/14d)

Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-5/14(a)]

Supply & Fixing 240 V 16/20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-5/14(b)]

Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc. [E-5/15(a)]

Supply & Fixing 240 V, 20 A plug socket (Brand approved by EIC), without plug top and switch, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc. [E-5/15(b)]

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required [E-4/12]

240 mm x 200 mm x 65 mm [E-4/12(e)]

Supply & Fixing Switch type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. [NS]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/17]

S/F 40 mm . Dia. 1.5 mtr long GI ditachable single arm bracket (ISI-M) with necy. Arrangement. [NS]

Excavation of soil for installation of Earth Electrode and filling & ramming. [G-1/1]

For Morrum Soil [G-1/1(b)]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:

By ISI-Medium GI pipe [G-1/2(a)]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [G-2/4(a)]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages

Solid GI Wire No. 4 SWG [G-2/5(a)(i)]

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts[G-1/2(d]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required[G-2/4(c]

Connecting the equipments body to earth busbar incl. S & F 50 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts,nuts,washers etc.[G-2/5(e]

Supply of 3 star rated non-inverter/ fix speed Split type Air conditioners of cooling capacity of minimum 24000 BTU/hr. Air Flow capacity must be 800 CFM & above. The units should be factory charged with R32/R410 A refrigerant only.The indoor unit should be compatible with wireless LCD remote controller with alphabetic error display like HP, LP, SPPR. (Make- O-General, Model-ASGA24BMWA-B) or equivalent model of Mitsubishi Heavy/Mitsubishi Electric as approved by EIC). Temparature distribution should be equal at every space of the specified room.

Supply of 3 star rated non-inverter / fix speed Split type Air conditioners of cooling capacity of minimum 18000 BTU/hr. Air Flow capacity must be 600 CFM & above. The units should be factory charged with R32/R410 A refrigerant only.The indoor unit should be compatible with wireless LCD remote controller with alphabetic error display like HP, LP, SPPR. (Make- O-General, Model- ASGA18BMWA-B or equivalent model of Mitsubishi Heavy/Mitsubishi Electric as approved by EIC). Temparature distribution should be equal at every space of the specified room.

Installation, testing and commissioning of split type A. C. Machines.

Supply and laying of 5/8" and 1/4" copper pipes with thermal foamtube insulation with 5/8" drain pipes for AC machines including S & L 3 core 2.5sqmm round copper cable.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. (F-6/11)

65 mm dia. (F-6/11€)

80 mm dia (F-6/11f)

METAL BOARD:- Supply & Installation of recteangular shape(12'X4') Metal glow sign board of stainless steel high glossy lettering to be fixed on aluminium composite panel (ACP) 3 mm thick, Identical Board to be fixed on wall of fromt of the wall. The total MS structure to be febricated by 40x40x6mm angle and 35x6 mm flat(size-10'x4') complete with 2 nos of door pallah in the back side including rail type locking arrangement. S&F of 3 nos of 25x25x6 mm 5ft. length MS angle with stifner to be fixed on the top of the board for lighning arrangement with 4 nos of 20W Spot/Flood light fitting with necessary connection etc. as per direction of EIC.(Make-Crompton/Philips/Bajaj). Total Box facia will be covered by 22 SWG GI sheet except front side. The high glossy lattering & suitable size national Emblem & logo will be fixed on ythe ACP board over front facia.Stainless Steel angle with SS screw for fixing the board on 50x50x6 mm M.S. angle to be grouted on board & protection with the pressure 2 nos of back stay may be provided. .

Supply & Fixing 10HP Fully Automatic Star Delta Starter in Sheet Steel enclosure T Type MN/ML(Motor Rating- AC-3 Duty, 415V, 50Hz, 3-Ph) on angle iron frame on wall as per direction of EIC. Specification: Product Name L&T MK1 FASD 10HP Brand L&T Series MK1 Product Type FASD Starters Coil Voltage 415V Code SS92454ACIVO Coil Voltage 240V Code SS92454ACIVO Power 10 HP Relay Range (A) 6A - 10A Rated Coil Voltage 240V Rated Voltage 415V Frequency 50 Hz Model SS96254COVO HSN Code 85369010 Product Code TNB-0117

S & F 3 phase MK1 Dol starter Thermal Overload Relay ensures Overload Protection and manual reset facility. make- L&T(Upto 10 KW)