constt of tile path at Buitul Huuz and graveyard Hajam mohalla, Under PRI -ADP for year 2026-27 ,Halqa Habak Tangoo Block Singhpora.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 15.2.2 1:4:8 or leaner mix (i/c equivalent design mix)

Surface dressing of the ground by manual means ,including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish etc, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Earth work in excavation by manual means in trenches for foundations,drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:all kinds of soil

Proving stone soling hand packed in excaated trench incl. Ramming ,levelling and incl all carraiges of material avg lead 30 km.

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand)

Providing and laying factory made chamfered edge 55+-2 mm thick Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 16.93.1 55+-2mm thick cement concrete paver block of M-30 grade with approved colour, design & pattern.

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. Vertical posts are avaliable at site.