SPL REPAIRS TO BATHROOM (OLD JCO MESS), QG FLOOR, RCC STEPS, PROVN OF SENTRY POST AT JRC AND INTERLOCKING TILES NEAR T-171 OF 39 (I) RO FLT, PARKING SHED AT P 3/1 (CWL) , P139/C IN PB MARG, GENTS TOILET NEAR CB 105 JLA OFRS MESS UNDER GE W BAREILLY

Amount

Demolition of cement concrete (unreinforced) in ground floors, and pavings n.exc. 15 cm thickness (below or above GL)

Demolition of reinforced cement concrete of any description and in any position otherwise specifically provided (reinforcement cut as required to facilitate demolition)

Demolition of brick work built in cement mortar in any description.

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) all as spd and directed

M&L brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in cm (1:4) all as spd and directed

Taking down chowkats or frames with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each

All as per item No 6 above but exceeding 1.5 Sqm but n exc 4 Sqm each

Taking down cement plaster on brick/ stone walls etc any description incl raking out joints, hacking for key, scrubbing down with water etc

M & L Rendering 15 mm thick on other than fair faces of brick work in CM 1:6 finished even and smooth (with out using extra cement)

M&L rendering 15mm thick in CM 1:4 on fair faces of brick/concrete walls, finished even and fair (without using extra cement) (WPC measured and paid seperately).

M & L for rendering 10 mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished the surface even and smooth without using extra cement complete all as spd and directed

M&L white washing two coats to ceiling surfaces including preparation of newly plastered untreated surfaces all as spd and directed

M&L white washing two coats to wall surfaces including preparation of newly plastered untreated surfaces all as spd and directed

M&L Preparation of old wall surfaces and applying two coats of white washing on wall all as spd.

M & L applying two coats of cement based paint on newly plastered orer a coat of primmer unplastered wall surface including preparation of surfaces, complete all as specified.

S&F in repair vitreous china water closet (squatt pan) orissa pattern 580x 440 mm size pan white with front or back inlet with integral foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including seat cover ,connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed

S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S & F urinal valve auto closing system with built in control cock & wall flange valve 15 mm bore including urinal sperader of CP complete all as specified and directed Make jaquar or equivalent Cat no PRS-077.

S & F vitreous china urinal half stall type colours excluding flushing cistern flush pipe and waste pipe.

S&F CI floor traps with grating complete 100mm bore outlet including jointing to waste pipe fixed in cement concrete type B1 1:2:4.

S & F in repairs 100 mm cast iron sanitary connection socket to fit WC out let.

S&F in repair fancy type stop valve 15mm dia, chromium plate alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed all as specified or as directed. .

S&F in repairs 450mm long PVC connection 15mm bore with PTMT nuts.

S&F fancy Bib tap 15mm dia cast copper alloy chromium plated with crutch or buter fly handle screwed down (Pressed for iron pipe) fixed in repairs

Taking up or down AC/PVC rain water pipe, soil/waste/vent pipe of any size with fittings etc.

S & F spun pipes iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified

M & L 75 mm dia cost Iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) as in repairs

S&F 100mm bore CI soil waste / vent pipe (spun type) in any length with or without ears with cement joint to wall with stack clamps out of 110mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing end of stays to wall or roof etc.all as specified including black japan paints Make neco

S&F 75 mm bore CI bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door

S&F CI 75 mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door

S&F 100mm bore CI bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door

S&F CI 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door

Dismantling water tanks and removing to store capacity exc 250 and not exc. 500 litres complete all as specified and directed.

S & F 500 ltrs capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repairs, 15 mm dia Ball valves high pressure of PTMT witth epoxy coated Aluminium rod& high-density plastic ball srewed for iron pipe and fixed (minimum weight 15mm-142gms/20mm-210gms/

S&F in repairs chromium plated fancy type concealed stop cock for 15 mm bore pipe complete all as specified and directed.

S&F in repairs chromium plated fancy type stop vlave /angle valves with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.

S & F steel window with side hung shutters incl box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

All as per item no 47 above but without glazing bars.

S&F framed work such as grills, gratings, etc..with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290. Gde-E-165

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed.

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed.

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 600 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed.

S & F Non skid ceramic coloured tiles7 mm to 8mm thick (square /rectangular )area of each tiles exceeding 0.06sqm but n . Exc 0.11 sqm superior premium quality, grade B-1 as per IS in Water splashing floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed or bedding layer in cement mortar 1:4 .

S & F Non skid ceramic coloured tiles7 mm to 8mm thick (square /rectangular )area of each tiles exceeding 0.11sqm but n . Exc 0.18 sqm superior premium quality, grade B-1 as per IS in Water splashing floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed or bedding layer in cement mortar 1:4 .

S&F coloured granite (of any type) 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing after roughing to surfaces and applying screed bed of 10mm thick of cement mortar 1:3 complete all as specified and directed.

M&L for Marble works 16 to 18mm thick Green marble machine cut and machine polished,and moulding, one side green marble, over/jambs of doors/ window cills, riser of steps and urinal partition wash basin platforms and flooring,skirting/dados like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble

S & F Sheet glass ordinary quality 3 mm thick and glazing with oil putty in squares n exc 0.5 Sqm in each pane.

S&F in repairs stain less steel wire cloth 0.36mm nominal dia of wire and average width aperture 1.40mm and fixed with stain less steel wire staples

Taking up or down steel tubing and connections, including cleaning for refixing removal to store bore of pipe 15mm.

Taking up or down steel tubing and connections, including cleaning for refixing removal to store bore of pipe 20mm.

S&F tubes ‘medium’ grade galvanized with all fittings fixed complete to walls and ceiling or laid in floor.bore of tube 15mm.

S&F tubes ‘medium’ grade galvanized with all fittings fixed complete to walls and ceiling or laid in floor.bore of tube 20mm.

M & L preparation of new steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer

M&L providing "FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm ) made out of extruded 5 mm (+- 0.25 mm ) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos Heat bent PVC sheet sections. the inside section of size 90x30 mm shall be made from plain colour PVC sheet of 5 mm (+-0.25 mm ) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS square tube The two vertical door frames are to be reinforced with 40 mm x 20 mm MS tubes of 19 guage through out the farme The door frame shall be fixed to the wall using 8/100 mm long screw through the frame by using anchor fastners. A minimum of 4 nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc complete as per manufacturers specifications and directions of engineers-in-charge

M&L in providing 30 mm thick factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2 nOs PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws etc complete as per direction of engineer-in-charge, manufacturers specification and drawing

S& F 100 mm size Stainless Steel butt hinges.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed,200 mm long.

S&F Extruded aluminium alloy handles, fabricated type., anodised 150 mm long.

S&F Extruded aluminium alloy,anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and slliding bolts of extruded sections or cast-aluminium alloy and fixed,300mm long.

S & F fancy type viterous china counter top, wash hand basin oval shaped colours of size 550 x 400 mm with granite inserted in 25 mm thick mounted granite stone slab platform by cutting on oval shaped etc incl CP bottle trap completed all as specified and ditected. (Granite cuttings shall be measured and paind separately Make Cers, Parryware

Extra over for cutting and moulding of granite in oval shaped to accommodate WHB of size 550 x 400 mm all as directed by EIC

S & F 6 mm thick looking mirror fixed on 12 mm thick marine plywood with power coated aluminium frame alround the mirror incl mounted on wall size 2.40 x 60 complete all as specified and directed.

Supply only liquid water proofing compound

M&L for RCC using 20mm graded mechanically crushed stone aggregate as in RCC shelves roof proj/drops/chajjas etc all as spd.

M&L for form work as in rough finished surfaces of soffits and of shelves, chajjas n.exc 20cm thick all as spd.

M&L for 8mm dia and over mild steel TMT bars for stirrups cut to length bent to shapes as required including bending cranking and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as spd.

All as per item No. 69 but 10mm dia and over.

S/F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls.

S&F in repairs 6 x 6 inches ultra slim shower head with 12 inches arm of Chromium plated brass for fixing 15 mm pipe with bend of 45 degree with flange complete all as specified and directed.

S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.

M & L 75mm thick plain cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L 25mm thick cement concrete type B1 1:2:4 using 20mm graded stone aggregate in floor finishes even and fair to receive floor tiles.

Supply and providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen,MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and directed and described as under :- (a) Prepartion of RCC foof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacture'"s specification complete all as specified and directed. (b) Supply & providing water proofing treatment with polymeric proofing membrane of 3 Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100 micron HMHDPE film centre core including coating he surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified or as directed.

M & L for solar reflective bitumens aluminium paint @ 0.10 Kg per Sqm over membrance surfaces as in roof treatment complete all as specified and directed.

M&L for terrazzo tiles 25cmX25cmX25mm thick with size of chips upto 12mm, set jointed and pointed in neat with white cement slurry in floors and skriting cut and polished. including 20mm thick screed bed 1:4 ,grinding and polishing in floor and 30 cmin height skirting etc.

M&L providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) as in benching, coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer-in-charge.

Removing excavated soils n.exc 50mtrs and depositing where directed at a level n.exc 1.50m above the starting point.

Demolition of reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs and stair case similar work carefully and matching to adjoining disturbed surfaces all as directed.

Demolition of cement concrete(unrinforced), in any position and paving n.exc. 15 cm thickness( below or above ground level) including tile/ terrazzo floor complete all as specified and directed.

M&L RCC desing mix M-25 as in slab, shelves and stair case etc.all as specified and directed.

M&L RCC desing mix M-25 as in beams, cantilevers, lintels, over 1.5 m span.

M&L desing mix M-25 as in columns, pillars, piers, posts and struts.

M&L desing mix M-25 as as in chajjas and like all as specified and directed.

M & L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide.

M & L formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified.

M & L formwork to spiral staircase with sloping or steppped soffits incl risers and staingers finishes rough surfaces of concrete.etc finished rough surfaces of concrete complete all as specified.

M & L for 15-18 mm thick machine cut kota stone slab flooring and jointed with grey cement slurry fixed with pigment to match to shade of the slab including rubbing and mirror polishing over and and or 15 mm thick bedding layer of cement mortar 1:6 for laying floor finishes even and rough with and including dismantling floor, hearth or wall kota stone slab including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L machine cut Kota stone slab 18 to 20mm thick in riser of steps skirting, dado and pillar,landing in single piece with round nosing with three numbers of serration, laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed dismantling of wall tile including cement mortar bedding complete all as spd and directed

M & L applying one coat of cement based paint on old decorated or undecorated wall, roof surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified.

Surface dressing n. exc 15 cm deep in soft/loose soil complete all as specified and directed.

M&l for 150 mm thick hardcore of guage n. exc 63 mm deposited spreaded and levelled in layers n. exc 15 cm thick watered and rammed to a true surface complete all as specified ans dfirtedcted.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

M&L for sand filling under floors or foundation including watering and consolidation complete all as specified and directed.

M&L for precast rubble moulded 80 mm thick M-40 grade concrete interlocking paver bloack any shape and size fixed with gray cement and no pigment confirming to IS 15658-2006 complete all as specified and directed.

M&L for concter type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in coping of sides of interlocking tiles cills steps seisimic and other similar bands plinth course string course lacing course parapets and railings up tpo 60 cm in heights kneelers apex stones bed plates water toughs and like including weathering slightly rounded or chamfered and throating as directed complete all as specified and directed.

M&L for kerb stone outer coloured surface machine pressed factory made M-25 grade of size 45cmx30cmx15cm cement concreter in position to the required lnes level and curvature jointed with cement mortar 1:3 around interlocking tiles including making joints with or without grooves (thixckness of joints expect making drainage openingf wherever required complete all as specified and directed.

Excavating in post holes in hard surface (or similar holes) each n exc 0.5cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface.

M& L for PCC1:3:6 type C2 (40mm aggregate) in surface channels and drainn walls orretaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts(including caps and bases)

S/F steel work in tubular trusses/rafter/ post/purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to fe-410 gde-250

S & F pre-painting galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 thick of an colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws as specified complete

S&F in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as spd and directed

M& L for Preparation of new iron surface and two coat of synthetic enamel paint ovar a coat of red oxide primer

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 m in depth, getting out in soft/loose soil etc., in luding trimming bottom and sides of trenches, leveling/grading and ramming bottom of excavation complete all as specified and directed

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil, complete all as specified and directed.

Removing surplus excaveted soil to a distance exc 250 Mtr and nexc 500 Mtr depositing where directed at a level n. exc 1.5 Mtr above the starting point complete all as specified and directed.

M&L for 150 mm bore SGSW pipe laid and jointed complete with collars all as specified and directed

M&L for concrete bed for 150mm in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation bed of manhole etc all as specified and directed.

M&L for PCC 1:2:4 type B-1(using 20 mm graded stone aggregate) as in channels/benching of manhole, laid to shape and slope and surfaces finished even and smooth using extra cement, complete including all form work etc all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick (internal faces of manholes ST in CM 1:4 mixed with water proofing compouind where ever required in proportion as per manufacturer"s instructions, including finishing the surfaces even & smooth without using extra cement.

Supply only integral water proofing compound (powder).

M&L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast RCC manhole / septic tanks covers including all form work and setting in CM 1:4 all as specified and shown on drgs.

Brick work with sub class B bricks, straight or curved on planexc 6m mean radious built in CM (1:6) etc as directed .

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc

M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square/rectingular)area of each tiles exceeding 0.11 Sqmbut not exceeding 0.18 Sqm (400 x 400mm) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM 1:6, complete all as specified and directed.

S&F in repairs brass chromium plated single lever basin mixer tall boy with 150mm extension body & 600mm long braided hoses complete all as specified and directed (Make- Jaquar cat No FON- 40005B)

S&F in repairs Vitreous china counter top wash basin white size 600mm x 400mm including PVC waste pipe , PVC connection 450 mm long ,32 mm CP waste coupling ,chain & plug, brackets etc complete all as specified and directed (Make :- Jaquar - Cat No SLS-WHT 6601 )

S&F in repairs Vitreous china wash down water closet single piece-WC with UF seat cover, hinges, fixing accessories, cistern fittings, size 655x665x760, S trap-300mm including connection to drain pipe etc complete all as specified and directed.( Make- Jaquar CAT No. LYS-WHT-38851S)

S&F 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like over a scree bed of 15mm thick 1:6 c ement mortar etc complete all as specified and directed

M&L for chromium plated brass angle cock/ stop cock/ two way cock all as spd and directed Make Jaquar/Cera/Hindware

M&L for 100x100mm Stainless steel floor trap Anti cock roach proof Trap

Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square meter of surface area.

Treating the top surface of filled earth at the rate of 5 litres of emulson per square metre of surface.

Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per meter of the perimeter wall

Spreading, levelling, watering and well ramming the earth filling under floor not exc 25cm thick in each layers is soft/loose.

M&L hardcore of broken stone or boulders of guage n.exc 63mm, deposited, sprea and levelled in layers nexc 15cm thick, watered and well reammed to a true surface

M&L PCC 1:4:8 type D2 using 40mm graded aggregate as in foundation, filling and mass concrete

Formwork to sides of concrete foundations, footings, bass of columns, rafts beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or batter, finished rough surfaces of concrete, complete all as specified and directed.

M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete etc finished rough surfaces of concrete complete all as speified and directed.

M&L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs landing and smimilar work no exceeding 200mm thick.

M&L 75mm thick PCC 1:3:6 type C-1 as in plinth protection & finishing the survace even and smooth with out using extra cement complete all as specified and directed.

M/L for 25 mm tublar curtain rod 1.6mm thick fancy pvc coated alloy chromium plated heavy duty with fixing brackets ,stops rollers,etc all as specified.

M & L for vitrified ceramic light shade coloured tiles 10 mm thick (Square/rectangular) area of each tile n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes all as specified and directed.

Ditto but in vertical surfaces including 10 mm thick backing coat or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as

Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed

S&F aluminium power coated(colour) section as in door, window(sliding),ventilator,glazed with aluminium shutter(medium weight) of suitable size, one or more rebate,cut to jointed together with cadmium plated steel screws including rubber bending or gasket for aluminium sections for fixing glass/Xpm jalli and necessary fittingd,screws, plugs for fixing screws, etc complete all as specified and directed by EIC (Aluminium section shall be of make Jindal/Hindalco/Indalco)

S & F Sheet glass ordinary quality 5.5 mm thick and glazing with oil putty in squares n exc 0.5 Sqm in each pane.

S&F 100mm size,SS butt hinges, all as specified.

S&F 150mm long, aluminium, anodised barrel tower bolts of extruded section all as described

S&F 150mm size aluminium handles, cast type anodised all as directed

S&F 300mm long aluminium alloy, anodised, sliding door bolt with asp, staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as directed

Ditto- all as above but 10mm thick in C.M 1:3 on ceiling surfaces

Supply only intigral water proofing compound

M&L for applying layer of 3 mm birla wall care putty on wall/ceiling surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as spd and directed.

M&L for applying two coats of oil emulsion distemper of tint on wall surfaces as approved complete all as specified and directed

M&L applying two coats of cement base paint over a coat of primer on new plastered surfaces of wall including preparation of surfaces

M&L for Three coat of white wash on new decorated surfaces of ceiling, soffits of roof/chajjas/projections etc. complete all as spd and directed.

M & L for double action floor spring hydraullically regulaed made up to of minium 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed completed all as specified and directed.

Supply & providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacturer's specification complete all as specified and directed. (b) Supply & providing water proofing treatment with polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100micron HMHDPE film centre core including coating the surface with the bitumen 85/25 @ 1.20 Kg/Sqm and torch application of membrane with 10cm overlaps and longitudinal edges 15 cm at the ends as required thereof, complete all as specified & directed.

M&L Aluminium paint one coat on APP membrane complete all as specified and directed.

Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified.

M&L point wiring with 1.5 Sqmm (FRLS) multi strand PVC insulated and unsheathed copper conductor cable concealed in PVC conduit 20 mm dia and including complete with 1.60mm thick pressed steel concealed galvanised terminal boxes and with top cover 3.0 mm thick ISI marked plastic laminated hylum sheet of reqd colour fixed with brass screws and cup washers, complete with all accessories and all as specified including 1.5 Sqmm (FRLS) PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for following.

(a) One light / fan/ exhaust fan point controlled by one switch.

(b) One 5 pin 5 Amp switch socket out let point on an independent board.

(c) One 5 pin 5 Amp socket out let point controlled by one switch on same board.

All as per item 2 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified.

S&F switch piano flush type 5 Amp single pole one way.

S&F socket out let 2 in 1 flush type 5 Amp 5 Pin complete.

S&F socket out let 6 Pin 2 in 1, 5/15 Amp flush type 240 Volt complete.

S&F switch piano flush type 15 Amp single pole one way.

Taking down submain wiring and cables including all accessories complete all as specified and directed.

M&L for sub main wiring with two single core 6.0 Sqmm (FR) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 2.5 Sqmm (FR) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 4.0 sqmm (FR) and one run of 2.5 sqmm (FR) copper conductor shall be measured as one unit length.)

Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.

M & L for replacement of lamp holder, PVC / Poly carbonate, insulated body with back plate batten/angle type for batten fittings complete all as specified and & directed

S&F MCB SPN 63 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.CAT No. CSMBS1B40/63 N of Make C&S or equivalent in Legrand/ Scheneider.

S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.CAT No. CSMBS1B6-32 of Make C&S or equivalent in Legrand/ Scheneider.

Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links Cat part No CSDBSPNSD04 ofof C&S or Equivalent Model in Legrand / Schenieder as Approved by GE complete including taking down old unsv all as specified and directed.

Supply and fixing surface mounting LED indoor decorative PVC extruded T-5 batten , 20 Watt, 4 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed. Model : Cat No. LTTB4F20WLED P/W of Make-C&S, its equivalent model in Philips/CG/Bajaj

Taking down, testing, repair and replacement of necessary item such as winding, bearing, bush, shaft, painting etc and refixing carefully serviceable exhaust fan of size 300mm, 230V , AC type including provision of new single core twin twisted cable from ceiling rose to ceiling fan connector all as specified and directed by Engineer in Charge.

Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced all as specified

Taking down, testing, replace/repair of parts such as elements, assembely, thermosta, painting etc and refixing of serviceable storage type electric water heater of capacity 25 ltrs , 230V AC type all as specified and directed by Engr-in-Charge.

Supply and fixing in repalcement LED bulb of 9 watt, 230V AC type of make- Surya, Havells, Bajaj all as specified and directed by Engr-in-Charge.

Supply only LED lamp 12 Watt, 230 V , AC integrated circuit complete all as specified and directed. Model -LTHPLED22W/B22 of Make C&S or equivalent in Philips/ Havells.

S&F MCB SPN 32 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.CAT No. CSMBS1B40/63 N of Make C&S or equivalent in Legrand/ Scheneider.

Supply and fix flush sheet metal enclosure SPN DB 4 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links Cat part No CSDBSPNSD04 ofof C&S or Equivalent Model in Legrand / Schenieder as Approved by GE complete including taking down old unsv all as specified and directed.

Supply & Fixing security light fitting, LED type, 25 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed. Model-BCLST 20W LED of Make- BAJAJ or eqvlt in Philips/ Havells.

Supply and fixing 1100 volt grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connectious suspended by insulating hangers not more than 1 meter apart including 4 mm dia suspension wire, one twin core cable flat of size 6 sqmm all as specified.

Suuply, fixing and testing exhaust fan of size 300 mm , 230V AC type of make- havells/Crompton/Surya complete all as specified and directed by Engr-in-Charge

S&F in replacement sheet metal enclosure DB's 415 Volts, IP-42, vertical suitable for mounting MCCB's, TPN, 4 way with 200 Amps rated copper bus bar complete all as directed by Engineer-in-charge.

Supply and Fixing in repairs MCCB TPN 100 Amps, 415V, 16kA ,Thermal Magnetic Release

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 3.5 core as required at site.

Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

Sand cushioning for cables all as specified and directed . Note:-Punned sand layers meassured only.

Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

REHAN CONSTRUCTION

Shikhar ji Enterprises

Goel Enterprises

novell engineers

Jain construction co

M/s S. K. Construction Co.