ANNUAL RATE CONTRACT FOR PROVIDING AND APPLYING HOT THERMOPLASTIC ROAD MARKING PAINT (ASIAN, BERGER and As per MORTH) WITH GLASS BEADS, MOLDED SHANK RAISED PAVAMENT MARKERS AND SOLAR STUD IN TPS NO. 11,12,17 (PUNA) AND TPS 64 (MAGOB-DUMBHAL) AREA OF EAST (VARACHHA) ZONE-A.

EAST (VARACHHA) ZONE-A

NAME OF WORK : ANNUAL RATE CONTRACT FOR PROVIDING AND APPLYING HOT THERMOPLASTIC

ROAD MARKING PAINT (ASIAN, BERGER & As per MORTH) WITH GLASS BEADS, Molded Shank

Raised Pavament Markers And Solar Stud IN T.P.S. NO.11,12,17(PUNA)AND T.P.S. 64(MAGOB-

DUMBHAL)AREA OF EAST (VARACHHA) ZONE-A.

Item Rate Amount

Particulars Quantity Per

Providing and applying 2.50 mm thick hot

applied thermoplastic road marking of white /

yellow colour on bituminous / concrete surface with fully

automatic machines as per detailed drawings /

engineers instructions for Lane markings, edge

markings / arrows including materials, labour charges,

tests required to be carried out etc. complete as per

details in tender specification & as directed by

A For Edge line marking of 15cm width

B For Center Line marking of 10cm width

C For pedestrian markigns at junctions (Zebra Crossing)

D For pedestrian markigns at junctions (STOP LINE)

E Letter markigns at junctions

F Direction arrow markigns at junctions

G For lane line marking of 15cm width

Supplying of Molded Shank Raised Pavement Markers

made of polycarbonate and ABS molded body and

reflective panels with micro prismatic lens capable of

providing total internal reflection of the light entering the

lens face and shall support a load of 16000 kg tested in

accordance to ASTM D 4280 Type H and complying to

Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 – DO III Dt 11.06. 1997. The height,

width and length shall not exceed 50 mm, 100 mm and

mm and with minimum reflective area of 13 Sqcm on each

2 side and the slope to the base shall be 35 +/- 5 370.00 217.40 Nos.

degree. The strength of detachment of the integrated

cylindrical shanks, (of diameter not less than 19 +/-

mm and height not less than 30+/- 2 mm) from the

body is to be a minimum value of 500 Kgf. Fixing will

be by drilling holes on the road for the shanks to go inside,

without nails and using epoxy resin based adhesive as

per manufacturer’s recommendation and complete

as directed by the engineer. (3M or Equivalent Brand)

Solar Stud: Supplying of Solar Raised Pavement

Markers made of polycarbonate molded body with circular

shape, solar powered, LED self illumination in active

mode, 360 degree illumination and reflective panels

with micro prismatic lens capable of providing total

internal reflection of the light entering the lens face in

passive mode. The marker shall support a load of

kg tested in accordance to ASTM D 4280. The marker

should be resistant to dust and water ingress according to

IP 65 standards and should withstand temperatures in the

range of 0 C to 70 C. Color of lighting could be provided in

red or yellow (amber) as per requirement and typical

frequency of blinking is 1 Hz. There should be current

3 losses of less than 20 micro- amperes at 2.4 V in sleep- 245.00 2068.00 Nos.

charging mode to enhance the life of the marker and a

full charge should provide for a minimum autonomy of

50 hours. The height, width and length of the marker

shall not be less than 10 mm x 100 mm x 100 mm.

Also, the surface diameter of the marker shall not be less

100 mm respectively. The weight of the marker shall

not exceed 0.5 Kilograms. Fixing will be by drilling

holes on the road for the shanks to go inside, without

nails and using epoxy resin based adhesive as per

manufacturers recommendation and complete as

directed by the engineer. (3M or Equivalent Brand)

Estimated Amount (Rs.)

Executive Engineer

East (Varachha) Zone-A

Surat Municipal Corporation