IV 11012/MW/CA-13/2024-25/Engr

SCHEDULE A PART-I REPAIR/MAINT OF INTERNAL WIRING, SUBMAIN WIRING, CONNECTED ACCESSORIES AND CONNECTED LIGHT FITTINGS VARIOUS BLDGS AT TRANSIT CAMP, SILCHAR (ASSSAM) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano typ[e switch,phenolic laminated sheet suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required:-2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

All as per item No 2 but for 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing piano type switch 3 pin 5/6 A on the existing switch box/ cover including connections etc. as required.

Supplying and fixing following piano type switch 3 pin 15/16 A on the existing switch box/ cover including connections etc. as required.

Supplying and fixing following piano type 3 pin 5/6 A socket outlet on the existing switch box/ cover including connections etc. as required.

Supplying and fixing following piano type 6 pin 15/16 A socket outlet on the existing switch box/ cover including connections etc. as required.

Supplying and fixing ceiling rose including connections etc as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

SCHEDULE A PART-II REPAIR/MAINT OF 08 x SEATED OR TOILET Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufac turer’s specification and direction of Engineer- in-charge Extruded section profile size 48x40 mm

Providing and fixing to existing door frames.24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110 mm dia with required clips

Providing and fixing on wall face unplasticised - PVC moulded bend 110 mm mm dia

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter

Repair of existing drain brick/concrete work after demolising existing one as per directed by Engineer-in-charge

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. 14.80.1 Long pattern W.C Pan of size 580x440 mm

SCHEDULE A PART-III REPAIR/MAINT OF FLOORING, CEILING, INTERNAL ELECT OF BLDG NO SP/TC/1992/01 (OC RESIDENCE) Dismantling tile work in floors and roofs laid in cement mortar includig stacking material within 50 metres lead. For thickness of tiles 10mm to 25mm

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling old plaster or skirting raking out joints and cleaning surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20mm nominal size)

M/L 15mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement : 4 fine sand)

Providing and laying Ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1: 4 (1 Cement : 4 Coarge sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigments etc., complete

Finishing external walls with Acrylic Smooth exterior paint of required shade : old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

LAKSHMI CONSTRUCTION