PROVN OF SOLID WASTE MANAGEMENT PLANT AT BORARUPAK MIL STN

M&L for providing plain cement concrete1:2:4, type B2, using 40mm aggregate, any size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts bases etc complete all as specified and as directed.

S&F mild steel works as in fencing, posts & struts in fencing embedded in stone masonry/bricks works or concrete including cutting tops to shape as directed, drilled holes notching for wires flat iron fillets (for securing wire mesh etc) inlcuding all drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

S&F mild steel round bars 10mm dia and over, in horizontal support for chain link fencing straining of fencing including cut to length, bent to shape required including cranking, bending spirally for hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) complete all as specified and directed.

Fixing only chain link fencing , any mesh, size and type to any type of standards, rails, straining bolts, etc. including providing of binding wire or clips complete all as specified and directed.

Supply and Fix Gunmetal Gate valve with iron wheel head, screwed both ends, ISI marked fixed to GI pipe of size 20 mm dia complete all as specified and as directed.

S&F in Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and strained and fixing to any type of standard rails straining bolts, etc. all as directed. (Each line wire to be measured)

Preparation of new or previously untreated steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint of approved shade over a coat of red oxide primer complete all as specified.

Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan, getting out in soft/loose soil complete all as specified and as directed.

Returning, filling including spreading leveling watering and well ramming in layers not exc 25 cm thickness using excavated soft/loose soil complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point for soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation ,filling mass complete all as specified & directed.

M&L for RCC 1:2:4, type B1 using 20mm graded aggregate as in Foundations, beam, plinth beams, base of columns etc basement slabs complete all as specified.

M&L for RCC 1:2:4, type B1 using 20mm graded aggregate as in columns, pillars, piers, post and struts etc complete all as specified.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or batter complete all as specified & directed.

M& L Formwork to sides of colums, pillars, posts etc. rough finished surface of suqare or rectengular complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F mild steel works as in doors or gates of angle or other sectons with gusset plates, rails, braces etc complete drilled, welded etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing all complete conforming to Fe 410 -W (Gde- E- 250) quality- A.

S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

Supply and laying well burnt clay Bricks, locally available best quality (sub class "B" bricks) laid in trenches perpandicular to U/G cable for cable protection complete all as specified and directed.

Supply and lay XLPE Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade of size 95 Sqmm x 3.5 Core complete all as specified and directed.

Supply and fixing XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross sectional area 10 sq mm 2 core complete all as specified and directed.

Supply & Fixing/ Laying Galvanised steel water tubing (Medium Grade), ISI Marked with all new GI Fittings laid in wall etc of size 40 mm dia complete all as specified and as directed.

Supply & Fixing/ Laying Galvanised steel water tubing (Medium Grade), ISI Marked with all new GI Fittings laid in wall etc of size 25 mm dia complete all as specified and as directed.