REPAIRS TO LEAKAGE SEEPAGE AND CERTAIN JOINERY WORKS OF OTM MD ACCN AT RANIKHET STATION UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Taking down chowkats or frames exc 1.5 Sqm but not exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutter only area exc. 1.00 sqm but n.exc. 2.00 sqm each complete all as specified and directed.

Taking down shutter only area n.exc. 1.00 sqm each complete all as specified and directed.

Supply & Fixing 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints and fixed to any position complete all as specified and directed.

Supply & Fixing 40mm thick (batten thickness) IInd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of 12mm thick veneered particle board medium density, wood particle board with commercial face veeneers or 9 mm BWP commercial ply complete all as specified and directed.

Material & Labour for prelam particle board18/19mm thick exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame work complete all as specified and directed.

S&F 30 mm thick flush shutter solid core construction with block board and ply wood face commercial type complete all as specified and directed.

Supply & Fixing 35mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, guage etc, (with out sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc, size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F 30 mm thick IInd class hard wood glazed and skelton shutters open rebated but divided into squares with plain chamfered or rounded mitred and sash bars and prepared to receive glass, guage etc, with out sash bars, edges of framing plain chamfered or rounded, fited with cut and mitred beads for securing glass, guage etc, if window, ventilators etc are providd with stiles and rails as specified, sizes of members of shutters as specified in MES SSR 2009 Part-I, Section 8, Clause 8.24 (b) complete all as specified and directed.

S&F factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / stainless steel dash fasteners of required dia and length complete as per direction of Engineer-in-Charge Note:- (i) M.S. hold fast/ lugs or stainless steel dash fasteners shall be paid for separately). (ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2, modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, all as per direction of Engineer-In-Charge (Note:- stainless steel butt hinges and necessary stainless steel screws shall be paid separately).

S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply & fixing 250mm long Aluminium alloy, anodised, sliding door bolt not less than 12 mm dia bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.

Supply & Fixing 125 mm size aluminium handle plate type anodised complete all as specified and directed.

Supply & Fixing 100 mm size aluminium handle plate type anodised complete all as specified and directed.

Supply & Fixing 150mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & Fixing 100mm long Aluminium tower anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply & Fixing 100mm size MS butt hinges, medium weight, cold rolled complete all as specified and directed.

Supply & Fixing 75mm size MS butt hinges, medium weight, cold rolled complete all as specified and directed.

Supply & Fixing in repairs Aluminium ( Die cast) body door closer hydraulically regulated designation No-3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight 61 to 80 Kg complete all as specified & directed..

Supply & Fixing in repairs 150 mm length of cover plate floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F in repairs helical door spring 375 mm with roller plate complete fixing arrangement complete all as specified and directed.

Supply & Fixing in repairs MS pressed handle 150 mm oval type, stove enamelled black fixed with screw and bolt in steel window complete all as specified and directed.

Supply & Fixing in repairs MS stay 300 mm fixed with screw and bolt in steel window complete all as specified and directed.

Supply & Fixing in repairs 150mm long brass barrel tower bolt and fixed complete all as specified and directed.

Material & Labour for 18/19mm thick block boards, grade 2 quality, exterior grade, commercial type, fixed with screws to timber frame work as in cup board shelf fixed in repairs complete all as specified and directed

Supply & Fixing in repairs 40mm width of flaps continuous (Piano) type hinges mild steel, bright finish or electrogalvanised complete all as specified and directed.

Supply & Fixing in repairs of galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply & Fixing galvanised mild steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Supply & Fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

Supply only 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in hold fast, bed block, etc, incuding necessary form work complete all as specified.

Supply & Fixing mild steel work as in hold fasts, bands, straps, supports or stays for pipes eaves gutter including bolts if required, hooks (stay), clamps and similar small articles, conforming to Fe 290 Grade E-165 complete all as specified and directed.

Material & Labour for preparation of new or previously untreated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material & Labour for preparation of new or previously untreated steel and iron surfaces of any description,not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling timber scantling in fillets, post, beading etc under 40 Sqcm in section fixed in any position with nails complete all as specified and directed.

M&L for 2nd class soft wood (Chir) plain fillets, square, rectangular or triangular in section, clean sawn secured with nails cross sectional area exc 3 Sqcm but not exc 6 Sqcm complete all as specified and directed.

M&L for 2nd class soft wood (Chir) plain fillets, square, rectangular or triangular in section, clean sawn secured with nails cross sectional area exc 13 Sqcm but not exc 25 Sqcm complete all as specified and directed.

S&F three track aluminium powder coated sliding window with three sliding shutter, the size of outer frame three track 100x37x1.50mm (using two track for glazed window shutter and one track for wire guaged), the section shutter size 37x18x1.2mm) and glazing with 5mm thick transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminium flat and inserted in the frame of shutter with tracking arrangment each sliding window shall be provided with one number handle including locking arrangement and 2 numbers sliding rollers of nylon with incuding all necessary fittings complete all as specified and directed.

Dismantling of wall panelling and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed.

S&F soild PVC wall lining consisting of 5 mm thick colour single side prelaminated PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

Dismantling of ceiling board (flbre pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed.

Supply & fixing 4 mm thick E-board classic for insulation and acoustic purpose, 595 X 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surface complete all as specified and directed.

Supply & fixing of powder coated aluminium anodised snap grid frame work for false celling comprising of the following sections for making partitions of 600x600 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 2mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 37mmx24mmx0.3mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick complete all as specified and directed.

Cleaning of PVC water storage tanks of capacity exc 250 ltr but n exc 500 ltrs mechanised dewatering of water including sludge from the tanks, cleaning internal & external tank surfaces with high pressure water spray, vaccum cleaning, anti bacterial spray, UV radiation, spray of bleaching powder including writing date of cleaning (with thick paint in capital bold letter) on each tank etc complete all as specified and directed. Note :-Rate includes the following:- (i) Opening & closing of tank covers properly before & after carrying out of cleaning work. (ii) Removal & refixing of float valves of any size & description before & after carrying out of work. (iii) Removal of sludge where directed by Engr-in-Charge. (iv) User completion certificate shall be produced by the contractor. (v) If damage of tank occurs during the cleaning, the same will be replaced with new tank by the contractor at his own cost. (vi) If damage of float valve occurs during the removal, the same shall be replaced with new one by the contractor at his own cost.

Dismantling plain or corrugated steel sheeting any guage, thickness, including Nainital pattern or similar pattern roof covering complete all as specified and directed.

Dismantling of Asbestos cement (corrugated or semicorrugated etc) sheets as in roof covering complete all as specified and directed.

Supply & fixing 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugation side laps, fixed with L or J type hooks or crank hook bolts and washers as in roofs, walls etc with grade of zinc coating 120gm per Sqm both sides inclusive complete all as specified and directed.

Supply & fixing 0.63mm thick Plain, galvanised, mild steel sheeting, as in roof, ridges, hips, valley gutters, drip and straight flashing with grade of zinc coating 120gm per Sqm both sides inclusive complete all as specified and directed.

Supply & fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete all as specified and directed

Supply & fixing pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete all as specified and directed

Taking down/dismantling of old tarfelt/old unserviceable roof treatment from RCC roof by scrapping, brooming and washing with water etc complete all as specified and directed.

M&L for 15 mm thick cement mortar rendering in 1:3 mixed with water proofing compound @ 3% by weight of cement over RCC roof and applying bitumen primer @ 0.30 kg/sqm and then apply hot blown bitumen grade 85/25 @ 1.2 kg/sqm and water proofing treatment by APP modified polymeric water proofing membrance (weight not less than 3 kg/sqm) with overlap of 10 cm sealed by frame shall be laid & the overlaps sealed/fused by flame as per manufacturer instructions & finally it will be finished with a coat of aluminium paint @ 0.200 Ltr/sqm as per manufacturers instructions complete all as specified and directed.

Dismantling of boarding any description and fixed in any position with nails complete all as specified and directed.

S&F 20mm thick 2nd class soft wood (Chir) boarding planned one side fixed with butt joints with nails in any situation/position except flooring and skirting complete all as specified and directed.

Demolition of brick work or stone masonry or precast PCC block walling built in cement mortar complete all as specified and directed.

Material & Labour for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubish to a distance exc 50m complete all as specified and directed.

M&L for providing cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) for making good of broken part of chajjas, roof projections etc, or recasting after dismantling broken portion including providing benching over chajjas from junction of wall & chajja to end of projection and making good to match with existing surface of wall including necessary form work, in different quarters of Cantt area, all as specified and directed. Note:- (The work shall be carried out at 1st floor/ 2nd floor. The contractor shall make necessary arrangement of scaffolding and ensure safty of labours at his own cost).

Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing complete all as specified and directed.

Material & Labour for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Material & Labour for 20 mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repairs 20 mm bore Gun metal gate valve with iron wheel head, screwed both ends for iron pipe all as specified and directed.

Dismantling of water tanks 500 ltrs capacity including disconnecting from existing connections complete all as specified and directed.

Dismantling of water tanks of any description, capacity exceeding 500 litres but not exceeding 1000 liters capacity including disconnecting from existing connections complete all as specified and directed.

Supply & Fixing coloured rotational moulded polythene water storage tanks Triple layered (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Supply & Fixing coloured rotational moulded polythene water storage tanks Triple layered (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Supply & Fixing in repairs 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including raking out joints, hacking for keys, scrubbing down with water etc and removing rubbish to a dostance not exc 50 m complete all as specified and directed.

Material & Labour for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finishing the surfaces fair and even complete all as specified and directed.

M&L for 5 mm thick rendering in CM 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material & Labour for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material & Labour for 15 mm thick rendering in CM 1:4 mixed with WPC @ 3% by weight of cement and finished even and smooth with additional thickness provided as floating / setting coat in vertical surfaces all as specified and directed. Note: WPC shall be measured and paid separately

Supply only WPC complete all as specified and directed.

M&L for sunken portion filled with lean concrete 1:5:10, type E-2 (using 40 mm graded stone aggregate) complete all as specified and directed.

M&L for 25 mm thick PCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in flooring complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in CM (1:6) for laying finishes in floors complete all as specified and directed.

M&L for 10 mm thick screed bed or bedding layer in CM (1:4) for laying finishes in vertical surfaces complete all as specified and directed.

Material & Labour for 300x450x7mm thick glazed ceramic tiles coloured, design and pattern as approved fixed as in vertical surface such as skirting,dado and riser to steps etc, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match over with and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Material & Labour for coloured non skid ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tiles exc. 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white cement with colour pigment over screed bed complete all as specified and directed.

Taking down AC rain water pipes (any size or pattern) including all fittings heads shoes bends swan necks etc complete all as specified and directed.

Supply & Fixing 100 mm bore cast iron pipe (sand cast) as in soil, waste and vent pipe, in any length with or without ears, with cement joints fixed to walls with mild steel work as in small articles such as stack clamps, flat iron, stays, including bolts and nuts and securing ends of stays to wall complete all as specified & directed.

Supply & Fixing 75 mm bore cast iron pipe (sand cast) as in soil, waste and vent pipe, in any length with or without ears, with cement joints fixed to walls with mild steel work as in small articles such as stack clamps, flat iron, stays, including bolts and nuts and securing ends of stays to wall complete all as specified & directed.

Supply & Fixing in repairs 100 mm dia cast iron bend (any radius) diminishing pieces or tapers including taking down existing & making good to match with existing surfaces complete all as specified and directed.

Supply & Fixing in repairs 75 mm dia cast iron bend (any radius) diminishing pieces or tapers including taking down existing & making good to match with existing surfaces complete all as specified and directed.

Supply & Fixing in repairs 75 mm dia cast iron bend (any radius) with oval access door including taking down existing & making good to match with existing surfaces complete all as specified and directed.

Supply & Fixing in repairs CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket types) or with parellel branches, 100 mm bore fitted with oval access door including taking down existing & making good to match with existing surfaces complete all as specified and directed.

Supply & Fixing in repairs CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket types) or with parellel branches, 75 mm bore fitted with oval access door including taking down existing & making good to match with existing surfaces complete all as specified and directed.

Supply & Fixing in repairs 100mm CI sanitary short connection pipe of length upto 300mm complete all as specified and directed.

Supply & Fixing in repair 15mm dia bib taps, long body cast copper alloy with crutch or butterfly handle screwed down ,screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

Supply & Fixing chromium plated stop valve or angle cock 15 mm bore brass chromium plated, screwed both ends for pipes or for unions fixed in repairs including making good to match with existing surface complete all as specified and directed

S&F in repair 100mm dia CP grating complete all as specified and directed.

S& F in repair Vitreous china premium/ 1st quality wash down water closet EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

Supply & Fixing in repair vitreous china squatting pan Orrissa pattern size 580 x 440 mm white with integral foot rests, with & including P or S trap (excluding material & labour of flushing cistern and flush pipe) including conection to trap and to flush pipe etc complete including making good to floor complete all as specified and directed

Supply & Fixing in repair polymer white (polypropeylene Delrin and ABS) low level flushing cistern 10 Ltrs capacity, valveless, syphonic action type complete with inlet, ball valve float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731, complete all as specified and directed.

M/s RK JOSHI&SONS

Shri Varada Enterprises

aditya construction

SS Construction Co

M/S G. S. MATIYANI AND SONS

M/S AJIT CONSTRUCTION CO

M/s RN Kharwar & Sons

M/s Arihant Builders

Prem singh kuwarbi and co

Amit Engineering

Jain Engineering Works

Ms dev associates