Electrification of New West Fort Shopping complex

Amount

Wiring for light point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Tube Light point (Short point)

Batten point (Short point)

Ceiling Fan with stepped type electronic fan regulator (short point)

Combined 5/6A plug point

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated 2.5 Sq.mm copper conductor, single core cable in surface/ recessed PVC conduit as required. ( Including cost of PVC conduit) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing suitable size Gl box with modular plate and cover in Front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connection etc. as required.

Supply and drawing copper conductor etc for earthing. as required 3.00 mm dia

Providing independent ordinary pipe earthing using 1.85 mtrs of 40 mm dia GI pipe ,earth wire copper and other specials such as common salt, charcoal bolts and nuts etc. complete required at site.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator) single phase 6 way Double door

Single phase 8 way DB duble door

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A

Supplying and fixing 5 A to 32 A rating, 240 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supplyirig and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing! MCB DB complete with connections, testing and commissioning etc. as required. 40 A

Supply and fixing box type single tube fittings 1200 mm with 18 W LED tube light on PVC round block mounted directly on wall or hanging from ceiling with suitable steel rods and giving connections using 3 core copper flexible conductor. etc. complete. .

Supply and fixing backlite Angle holder with shade and giving connection including supply of 9/10W LED lamp.

Main LT Panal Board App. Size 3000x1750x250 mm : Supply, fabrication, erection, testing and commissioning the following floor mounted free standing cubicle type fully compatmentalised (Busbar chamber,Cable chamber, 20Nos Single phase Energy meter chamber, 1No. 3phase Energy meter chamber,20 single phase SFU chamber and 3 phase SFU chamber ) dust tight, vermin proof LT panel boards fabricted out of 16SWG CR sheet and 2 coated enamel paint after primer coated as per IS specifications . The Board shall be completed with phase indication lamps in the incoming, suitably rated TPN Aluminium Busbars and earth bus of adequate capacity, double earth connection to all switches, intenal rigid connection etc. (Incomer:- 125A 3phase SFU with HRC fuse.1No. TPN Al. Busbar as per ISS, Outgoing :- 32A single phase SFU with HRC fuse. 20 Nos, 32A Kitkat fuse unit 20Nos and 100A Kitkat fuse unit 3Nos.)

Supplying and Fixing Single phase meter chamber with inspection type front door,size 450x300x200mm, made of MS sheet 16SWG and flats neatly painted,including provison for fixing Fuse units and single phase energy meter directly on wall using proper bolts ,nuts etc.and making good the surface of wall etc. complete

Supply and fitting 32A 230V LT heavy duty switch disconnector fuse unit in sheet steel enclosure on angle iron frame work and giving connections etc. complete.

Supply and fitting 32 A 230V Kitkat type fuse unit in the existing fuse box and giving connections etc. complete.

All the Statutory payment remitted by the contractor,for effecting Electrical Service Connection will be reimbersed in actual on producing the bill from concerned Electrical Department.