Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC DOOR NO 2 391 VUDA COLONY GURRAMPALEM DISTRICT VISAKHAPATNAM ANDHRA PRADESH 530051 | VISAKHAPATANAM | ANDHRA PRADESH | 530051 | L1 | Accepted-AOC RATES
QUOTED ARE
REASONABLE | |
| 2 | L2₹9.4 L+₹10,083.60 (1.09%)Rejected-Finance | L2 | Rejected-Finance RATES
QUOTED ARE
HIGHER
THAN L1 | |
| 3 | L3₹9.8 L+₹56,260.30 (6.08%)Rejected-Finance D NO 38 22 40 NEAR LAKSHMI NARASHIMA THEATER 104 AREA VISAKHAPATNAM 530007 | VISAKHAPATANAM | ANDHRA PRADESH | 530007 | L3 | Rejected-Finance RATES
QUOTED ARE
HIGHER
THAN L1 | |
| 4 | L4₹10.5 L+₹1.3 L (13.5%)Rejected-Finance | L4 | Rejected-Finance RATES
QUOTED ARE
HIGHER
THAN L1 | |
| 5 | Rejected-Technical SECOND FLOOR RZ 46B 3 KH NO 34 3 4 7 GALI NO 2 MAIN SAGARPUR NEW DELHI 110 046 | NEW DELHI | DELHI | 110046 | - | Rejected-Technical Rejected due to not enlisted in required category |
Tender Value
₹9.6 L
EMD Value
₹19,200
Closing Date
13 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (P) (NAVY) VIZAG
Garrison Engineer Project Navy Vizag, HQ CE Navy Complex, Station Road, Visakhapatnam AP-530004
8876/E8 PROVISION OF LADIES AND GENTS TOILET AT GARRISON ENGINEER (PROJECT) (NAVY) VISAKHAPATNAM
2024_MES_657527_1
8876/E8
Open Tender
Civil Works
Item Rate
180 days
GE (P) (NAVY) VIZAG
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (P) (NAVY) VIZAG
₹19,200
Yes
21 Oct 2024
12 Jun 2024
20 Jul 2024
12 Jun 2024
13 Jul 2024
26 Jun 2024
12 Jun 2024 - 26 Jun 2024
Amount
SCHEDULE 'A' PART-I (B/R WORKS) Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft / loose soil complete all as specified and directed by Engineer-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed by Engineer-in-Charge.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.
M&L for PCC type D-2 (1:4:8) (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
M&L for RCC M-25 (20mm grade aggreagtes) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engineer-in-Charge.
M&L for RCC M-25 (20mm grade aggreagtes) in Columns, pillars, piers, posts and struts complete all as specified and directed by Engineer-in-Charge.
M&L for RCC M-25 (20mm grade aggreagtes) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge.
M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape, required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as per item No.8.00 as above but 6 to 8 mm dia
Formwork to sides rough finished of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc flat complete all as specified and directed.
M&L for brickwork with fly-ash old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for Hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface with broken stones complete all as specified and directed.
M&L for plain cement concrete (1:3:6) type C-2 using 40 mm graded aggregates in sub base of floor etc, complete all as specified and directed.
M&L for non skid ceramic 7-8 mm thick coloured tiles (square/ rectangular), area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment as in floor, laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L glazed coloured ceramic tiles in vertical surface 300 X 450 X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles including 10mm thick screed bed in cement mortar (1:3) complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished rendering surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished rendering surfaces even and smooth without using extra cement complete all as specified and directed.
Supply only water proofing compound all as specified and as directed.
M&L for preparing new surface of walls and applying two coats of oil bound distemper over on coat of primer applied over 3 mm thick wall putty complete all as specified and as directed.
M&L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.
S&F of Chlorinated Polyethylene Chloride (CPVC) pipes 20 mm outside dia, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings (such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector etc) fixed / laying walls, ceilings or in floors etc. With suitable size MS clamp of spacing 1.00 mtr etc pipe line complete all as specified and directed.
S&F of Chlorinated Polyethylene Chloride (CPVC) pipes 15 mm outside dia, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings (such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector etc) fixed / laying walls, ceilings or in floors etc. With suitable size MS clamp of spacing 1.00 mtr etc pipe line complete all as specified and directed.
M&L for Vitreous China urinals, bowl type, flat back, sizeof 465 x 355 x 265 mm white (minimum), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and Union for discharge pipe. complete all as specified and directed.
S&F vitreous china (white) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
S&F of PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, of capacity 10 Litres, including brackets, flush pipe, complete all as specified and directed.
S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type), making good disturbed Surfaces in Cement Mortar 1:3, providing CP waste coupling including brackets complete all as specified and directed.
S&F 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F 15 mm bore angular stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F 15 mm bore PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/ platic cleats complete complete all as specified and directed.
S&F 75 mm dia. PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed
S&F Factory made solid PVC door frame (chowkhat) of size 50mm X 47mm, made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, Supply and fixing in opening as per specification & drg as per manufacturer instrutions complete all as specified and as directed.
S & F factory made solid panel PVC door shutter of 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in frame complete all as specified and directed.
S&F 75 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 complete all as specified and directed.
S&F 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 125 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as suitable 150 mm long peg stays (01 No), hinges type B-21 100 mm long (02 Nos), suitable handle-01No each shutter etc as per manufactures instruction complete all as specified and directed. (NOTE: Quoted rate is deemed to be inclusive of the cost of include for anodised aluminium hard ware as indicated, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames, handle etc as described in item. Sheet glass shall be measured seperately)
S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes, single socketed, conforming to IS:13592-1992, type 'A', in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes, single socketed, conforming to IS:13592-1992, type 'A', in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed.
S&F 110 mm bore UPVC (SWR) bend any radius complete
S&F 110 mm bore PVC (SWR) bends any radius with access door fixed with solvent cement complete all as specified and directed.
M&L for Concrete bed drain pipes (bore of pipe 100mm) including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D-2 complete all as specified and directed.
M&L for Salt-Glazed stoneware drain pipe 100mm bore (dia), grade ‘A’, laid in trenches, jointed with cement mortar 1:1 and tested, complete all as specified & directed.
S&F Salt-gauged stoneware gully traps, square or round mouthed, type 'P', size 150x100 mm complete all as specified and directed.
M&L for structural steel work Fe 410-W (Gde-E-250) quality-A in roof trusses (framed), trussed, purlins, crane gantries, rials and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed by the Engineer-in-Charge
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge
M&L for preparation of new steel or steel based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/sub base, finished even and smooth without using extra cement complete all as specified and directed.
Supply, hoisting and fixing rotational moulded polythelene water storage tank cylindrical vertical type with closed top of capacity 500 Ltrs, double layered, ISI marked cement complete all as specified and directed.
S&F PTMT Ball Valve 15mm dia having minimum weight 142 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed complete all as specified and as directed.
Cutting into existing manholes 100mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
S&F galvanised tube, medium grade, 15mm dia with necessary fittings laid in walls and ceilings or laid in floors complete all as specified and directed.
S&F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
SCHEDULE 'A PART-II (INT ELECTRIFICATION) Material and labour for point wiring with 1.5 sqmm (nominal area) FRLS-H PVC insulated unsheathed multi stranded copper conductor (1100 V grade) cable drawing in and including PVC rigid concealed conduit medium grade, 20mm dia, ISI marked, with all conduit fittings and accessories, for one light/fan/call bell point controlled by one switch alongwith FR PVC insulated unsheathed cable with multi stranded copper conductor of size 1.5 sqmm and connected to earth dolly including fixing of 1.2 mm thick MS sunken terminal box suitably flushed to wall with 3.0 mm thick plastic laminated/ebonite sheet cover fixed with brass screws & cup washer complete all as specified and directed. NOTE :- (i) Where tube light fittings is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling. (ii) Point wiring shall be measured from switch board to outlets only. Main circuit wire of the switch board shall be measured & paid seperately.
S&F modular switch one way 6 Amps 230 volts, 1 module complete all as specified and directed
S&F surface mounted LED luminaire, 1 X 9/10 Watt in polycarbonate housing, operating voltage 180-270 V, with acrylic/polycarbonate difuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size complete all as specified and directed.complying with the following specifications:- (a) minimum efficacy 100 lumen/watt (b) CRI not less than 80, (c) THD < 20% (c) having in built short circuit and surge protection (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation
All as per Item No. 65.00 as above but 5/6 watts
S&F surface mounted LED luminaire, 1 X 20 Watt in aluminium housing, operating voltage 180-270 V, with acrylic/polycarbonate difuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size fitting complete all as specified and directed. complying with the following specifications:- (a) minimum efficacy 110 lumen/watt (b) CRI not less than 80, (c) THD < 20% (c) having in built short circuit and surge protection (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation
S&F LED Street Light fitting, of 35/36 WATT capacity as mentioned under, in high pressure die cast aluminium housing with prismatic polycarbonate modular secondary lens optics with integrated constant current electronic driver, top opening driver cover, IP66 ingress protection, impact resistance of IK07 complete all as specified and directed and complying with the following specifications:-. (a) minimum system efficacy 120 lumen/watt (b) CRI not less than 70, (c) THD < 10% (d) Power Factor not less than 0.90 (e) having in built short circuit and surge protection upto 4 kV (f) having 10 KV external surge protection (for 45 watt & above) (g) colour temperature not less than 5700 degree K (h) life not less than 50000 hours of operation
Supply and fixing ceiling rose surface bakelite of size 63 x 23.5 mm three terminals complete all as specified and directed.
S&F ventilating fan 250 mm sweep, and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 Sq mm, 3 core, 1100 Volts grade, from ceiling rose to fan complete all as specified and directed.
S&F SPN DB, IP 43 protection, double door 240 volts, 4 way, with 100 Amps copper Bus Bar complete all as specified and directed.
S&F MCB 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.
S&F MCB 'C' series, SPN, 32 Amps, breaking capacity 10KA complete all as specified and directed.
Material and laying for sub main wiring with 2 runs (P-N) of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm 1100 volts grade along with one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6 sqmm 1100 volts grade as earth continuity conductor drawn through and including adequate size PVC nonmetallic concealed conduit complete all as specified and as directed. (NOTE : Three runs of single core 6.0 sqmm cable and one run of PVC conduit shall be measured as one unit)
SHIKHARA PROJECTS (BID ID -3053412)
AYYAPPA CONSTRUCTIONS (BID ID -3058821)
LAKSHMI SAI CONSTRUCTIONS (BID ID -3060287)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .