A/R and M/O to 500 Bedded Hospital in Dr. RPGMC at Tanda in Distt. Kangra (Deposit work) (SH-Repair of various works for the year 2021-22)

Amount

Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres (Twenty metres) lead in cement mortar complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Repair to plaster with cement mortar 1:3 (One cement : Three sand) in patches of 2.50 sqm (Two decimal five zero) square metres upto any thickness including cutting the patches in proper shape and re-plastering the surfacing to the wall including disposal of rubbish to the dumping ground complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Brick work using second class common burnt clay building bricks in Super-structure above plinth level up to floor two level in cement mortar 1:6 (1 cement: 6 sand) complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying cement concretefly ash blocks masonry with cement concrete blocks of size 40cm x 19cm x20 cm (Forty centimetre into nineteen centimetres inti twenty centimetres) i/c quion block jamb blocks and closers etc. made of cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) laid with cement mortar 1:6 (1 cement : 6 sand) i/c curing complete in super structure upto floor two level complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and laying cement concrete work 1:2:4 ( one cement isto two sand isto four graded stone aggregate 20mm ( twenty millimetres ) nominal size and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floor roof , landing and shelves and their support balcones , beams , girders, bressumers and contilever upto floor two level complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm (Twenty milimetres) nominal size) and curing complete excluding cost of form work in complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Grinding and polishibg of terrazoo tile flooring/skirting/kota stone fooring and skirting or dado upto 30 cm. (Thirty centimetres) height (rubbed and polished to granolithic finish) complete and as per direction of Engineer- in-Charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and laying marble chips skirting or dado upto any height (rubbed and polished to granolithic finish) laid in cement marble powder mix 3:1 (Three cement : one marble powder by weight) in proportion of 4:7 (Four cement marble powder mix : Seven marble chips by volume) in top layer light shade pigment with white cement (in top layer only) complete and as per direction of Engineer- in-Charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing 20mm (Twenty milimetres) thick Kota stone slab flooring, risers of steps,skirting dado 25 mm (Twenty five millimetres) (average) thick base of cement mortor 1:4 (One cement : Four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing completecomplete within all leads, lifts and carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge

Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws for doors windows and ventilatiors and glazed partitions frames. All complete as per architectural drawings complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws for shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) all complete as per architectural drawings complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In-charge (cost of aluminium snap beading shall be paid in basic item.) Glazing with glass panes of 6mm(Six millimetres) thickness (weight not less than 13.75 kg/sqm (Thirteen point seventy five kilgrams/square metre) Modi guard or its equivalent complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors complete as per the direction of the Engineer-Incharge including making good the floors complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 4mm (Four millimetres) thick E-Board (Embassed board) Ceiling of approved quality of ISI Mark including fixing to base frames with screws and clamps etc complete (frame work for base & cover fillets to be measured and paid for separately) complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 19mm (Nineteen milimetres) thick commercial board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 1.00mm (One decimal zero milimetres) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

White glazed tiles 6mm thick in flooring, treads of steps and landing laid on a bed of 12mm (Twelve milimetres) thick cement mortar 1:3(One cement :Three sand) 30x60cm (Thirty into sixty centimetres) thick Somany, Kajaria or Cera make finished with flush pointing in white cement complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

White glazed tiles 6mm (Six millimeters) thick in skirting , risers of steps and dado for all heights and 12mm (Twelve millimeters) thick sizes of tiles with cement mortar 1:3 (One cement: Three sand) and jointed with white cement slurry complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing second class deodar wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 40mm (Forty milimetres) thick second class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows, including black enamelled iron butt hinges with necessary screws complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing second class deodar wood 35mm (Thirty five millimetres) thick second class deodar wood, panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws, including carriage of material as per directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing second class deodar wood 40mm (Forty millimetres) thick Fly wire mesh shutters using galvanized S.S. wire gauge of I.S. gauge designation 85G (Eighty five G) with wire of dia 0.56mm (Zero point five six millimetres) for doors windows and clerestorey windows including bright finished/black enamelled iron hinges with necessary screws complete as per specifications, drawing, design including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-Incharge.

Providing and fixing 4mm (Four millimeters) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) as per approved drawing, design complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 10mm (Ten millimetrers) thick plaster flat surfaces of paris (Gypsum unhydrous) ceiling upto a height of 5 (Five) metres above floor level with aluminium frame work and hangers complete in all respect and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing brass curtain rail with rollers stop ends and brackets in pelmets instead of wooden curtain rod 25 mm dia and brackets of first class deodar wood (actual length) of rails of be measured complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing M.S. grills Ornamental Grill of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing 40x3mm (Forty into three millimeters) flat iron hold fast 40cm (Forty centimeters) long including fixing to frame with 10mm (Ten millimeters) diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30x10x15cm. 1:3:6 (One cement : Three sand: Six graded stone aggregate 20mm nominal size) complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

300x16mm size (Three hundred into sixteen milimetres)nominal size

250x16mm(Two hundred fifty into sixteen milimetres) nominal size

Providing and fixing 300x10mm (Three hundred into ten millimetres) aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

300x10mm (Three hundred into sixteen millimetres) nominal size

250x16mm(Two hundred fifty into sixteen milimetres) nominal size

Providing and fixing 300x10mm (Three hundred into ten millimetres) aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

125mm (One hundred twenty five milimetres) nominal size

100mm (One hundred milimetres) nominal size

Providing and fixing 100mm (One hundred millimetres) size bright finished brass rim latch and lock a pair of knobs with necessary screws etc. complete (indian make of approved quality) complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred milimetres) bright finished brass door stoper with rubber cushion screws etc to suit shutter thickness complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 65x35mm (Sixty five into Thirty five milimetres) special quality bright finished brass cup-board locks or ward robe locks with six levers including necessary screws etcetra complete (Indian make of approved quality) complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing chromium plated brass sliding door bolts with nuts and screws etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

300x16mm (Three hundred into sixteen millimetres) nominal size

250x16mm(Two hundred fifty into sixteen milimetres) nominal size

Providing and fixing 150mm (One hundred fifty millimetres) M.S. double acting spring hinges of approved brand with necessary screws etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 12mm (Twelve millimetres) thick prelaminated board both side bwp phenol bonded exterior/interior grade panelled shutters including bright finished/black enamelled iron butt hinges with necessary screws complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying 16mm to 20mm (Sixteen to Twenty millimeters) thick granite stone in flooring 20mm (Twenty millimeters) (average) thickness base of cement mortar 1:3 (One cement : Three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing and moulding complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm (One point sixty six milimetres to two milimetres) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Supplying and fixing expended metal to wood or steel members in partitions etc. weight exceeding 3kg (Three kilograms) and not exceeding 5kg (Five kilograms) per Sqm. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing plain square edged cover fillets (beading) 50mmx12mm (Fifty milimetres into twelve milimetres) section, with wood screws in ceiling and lining includingmitring at junction complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying water proofing of RCC slab with liquicrete ISI as Acrlic Polymade binding with cement, providing Fibre mesh and liqucrete RTU as Two components Acrylic base Modified cementation water proofing coat system complete and ornamental moulding in side of gutter complete and as per direction of Engineer-In-Charge, including entire carriage of material within all leads, lifts and other incidentals.

Providing and fixing toughened glass 8mm to 10mm (Eight millimetres to Ten millimetres) thick with holes if required of any size and chamfering of cutting edges of the glass complete and as per direction of Engineer- in-Charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing wire mesh 50x50mm (Fifty into fifty milimetres) size of 3mm (Three milimetres) thick wire complete and as per direction of Engineer- in-Charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing Garsa stone 12mm (Twelve milimetres) cladding on R.C.C.surface side as on faces of Arch masonry walls etc.on 12mm (Twelve milimetres) thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry i/c scaffolding etc. complete and as per direction of Engineer- in-Charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm (Six hundred into Six hundred into ten millimetres) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 0.63mm (Zero decimal six three milimetres) thick G.I. sheet roofing fixed with galvanized iron J or L hooks, bolts and nuts 8mm (Eight milimetres) diameters with bitumen and G.I. limpet washers filled with white lead complete, excluding the cost of purlins rafters and trusses including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing valleys 90cm (Ninety centimeters) over all in 0.63mm (Zero decimal six three milimetres) thick plain galvanised iron G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8mm(Eight milimetres) diameters G.I. limpet and bitumen washers complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing ridges or hips 60 cm(Sixty centimeters) over all in 0.63mm(Zero decimal six three milimetres) thick plain galvanized iron G.I. sheet fixed with galvanized iron J or L hooks, bolts and nuts 8mm(Eight milimetres) diameters G.I. limpet and bitumen washers as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet ISI marked or its equivalant in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 10 (Ten) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six millimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required including carriage of materials within all leads, lifts of materials and other incidentals and further as per specification approved architectural drawing, design and specification as directed by the Engineer-Incharge.

Providing and fixing ridges or hips laying propper Gola/ shape 60cm (Sixty centimeters) over all with 0.60mm (Zero point Six zero millimeters) thick prepainted sheet ridges with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Tweny) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimeters) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of material within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge.

Providing and fixing valley 90cm (Ninety centimeters) over all with 0.60mm (Zero point Sixty millimeters) thick prepainted sheet roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 5 (Five) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimeters) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge.

Providing and fixing 30cm (Thirty centimeters) wide 30cm (Thirty centimeters) deep of 0.60mm (Zero decimal six zero milimetres) thick plain G.I. sheet gutter with iron brackets 40x3mm (Forty into Three milimetres) size dome shape shall be provided which shall be M.S. plate 25x5/6mm Sqm (Twenty five inti five/six millimetres) square round shape with 6mm (Six millimetres) dia bars in dome bolts, nuts and washers etcetera including making necessary connections with rain water pipe complete including carriage of materials within all leads, lifts and other incidentals and further as per specification approved architectural drawing, design and specification as directed by the Engineer-Incharge complete.

Providing and fixing 150mm (One hundred fifty millmetres) dia for C.I. pipes M S holder bat clamps of approved design to C.I. or S.C.I. pipes embeded in including cement concrete blocks 10x10x10cm (Ten into ten into ten centimeters) of 1:2:4 (One Cement : Two Sand : Four graded crushed stone aggregate 20 mm (Twenty millimetres) nominal sizecutting and cost of cutting holes and making good the wall etc; making good complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

150mm (One hundred fifty millmetres) dia

100mm (One hundred millmetres) dia

Providing 2mm (Two millimetres) thick sheet perpex sheet roofing fixed with G.I. or J. and L hooks,bolts and nuts 8mm (eight millmetres)diametre with bitumen and G.I. limpet washers filled with white lead complete excluding cost of purlins, rafters and trusses complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying on wall face PVC (D-Plast) rain water working pressure not less than 4.50 kg/sqm (Four decimal Five Zero kilograms per square metre)including filling the joints with approved adhesive complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

100mm (One hundred millmetres) dia

150mm (One hundred fifty millmetres) dia

Providing and fixing PVC plain bend 150mm (One hundred fifty millimetres) dia on wall face P.V.C. acessories for rain water pipes 4.50 kgs/sqm (Four point five zero kilograms per square metre) working pressure class B PVC D-Plast ISI mark of SFMC/Finolex/Relpipe(Reliance) or its equivalent high denesity pipe for rain water pipe fixed with approved adhesive including filling the joints complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing polycarbonated transparent sheet 1.20mm (One decimal twenty millimeters) thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpet and bitumen rubber washer complete with all accessories as required complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Steel work welded in built up sections,trusses and framed work, including cutting, hoisting ,fixing in position and applying a priming coat of red lead paint in beams joists channels, angles, tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima ) or equavalent Asian paints of Nerolac on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Applying priming coat over new steel & other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Applying modrent solution on new G.I sheet for preparation of surface for painting @5 (Five) litres/100 sqm (One hundred square meter) of surface and rubbing the solution with brush including thoroughly cleaning the surface of all oil grease dirt and other foreign matter complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with white readymixed paint complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Painting (Two or more coats) on G.I. sheets with readymix paint of approved brand and manufecture on old work to give an even shade white /grey/green shade complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Removing old paint from steel and other metal surfaces & making the surface even with paint remover of approved brand and manufacture complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces of all dirt, dust and other foreign matter and sand papering and knotting with ready mixed paint brushing wood pink primer complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Painting two coats (excluding priming coat)on new wood and wood based surface under coat with enamel and finishing coating with flat oil paint, brushing to give an even shade including cleaning of all with paint other then white complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with readymixed primer complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand papering as required with paint other than white as complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Removal of old broken glass panes (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Supplying and fixing 3.50mm to 4mm (Three point five zero millimetres to Four millimetres) thick Plain Glass panes with putty and nails including removal of broken glass panes wherever necessary complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing Gl Clip in Metal Ceiling System of 600x600mm (Six hundred into Six hundred millimetres) module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm (Zero point five millimetres) thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm (Three hundred millimetres) centre to centre, suspending the main C carrier of size 10x38x10 mm made (Ten into thirty eight into ten millimetres) of G.I steel 0.7 mm (Zero point seven millimetres) thick from the soffit with help of soffit cleat 37x27x25x1.6 mm(Thirty seven into twenty seven into twenty five into one point six millimetres), rawl plugs of size 38x12 mm (Thirty eight into twelve millimetres) and C carrier suspension clip and main carrier bracket at 1000 mm one thousand millimetres centre to centre inverted triangle shaped Spring Tee having height of 24 mm (twenty four millimetres) and width of 34 mm (thirty four millimetres) made of Gl steel 0.45 mm (zero point forty five) thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm 9Sxi hundred millimetres) centres with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (One hundred) (both side inclusive), fixing with clip in tiles into spring T with GI Metal Ceiling Clip complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) Jindal and Tata approved quality tube fitting and clamps including making good the wall, ceiling and floor complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe Cera, Jaquuar and Hindware in cement mortar 1:1 (One cement : One sand) Angle Indian Universal closet (Seat and over to be measured and paid for separately complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing sand cast iron 100mm (Hundred milimetres) size P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (one cement: one sand) complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing vitreous china water closet squatting pan (Indian type W.C. pan) size 580mm (Five hundred eighty millimeters) Cera, Jaquuar and Hindware (earth work, bed concrete, foot rest and trap to be measured and paid for separately) complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 50mm (Fifty millimetres) thick G.I. Inlet connection for flush pipe with W.C. Pan complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing plastic seat (Solid/Hollow type) and cover Cera, Jaquuar and Hindware for wash down water closet with C.P. Brass hinges and rubber buffers complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing vitreous China squatting plate pattern urinal Cera, Jaquuar and Hindware of size 450mmx350mm (Four hundred fifty into three hundred fifty millimetres) with integral longitudinal flush pipe complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing (vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white Cera, Jaquuar and Hindware including cutting holes and making good the same but excluding fittings complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

550x400mm (Five hundred fifty into four hundred millimetres)

400x400mm (Four hundred into four hundred millimetres)

Providing and fixing 600x450x150mm (Six hundred into Four hundred fifty into One hundred fifty millimetres) vitreous china laboratory sink Cera, Jaquuar and Hindware with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 610x460mm (Six hundred ten into Four hundred sixty millimetres) with bowl depth 200 mm stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetres) nominal size C.P. Brass chain 50cm (Fifty centimetres) size long and rubber plug of following sizes for sink or wash basin Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two milimetres) diameters rubber plug for sink/wash basin ISI make complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetres) dia C.P. Brass waste for wash basin or sink ISI make complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two milimetres) diametres M.I. Union for wash basin or sink ISI make complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred milimetres) diametres C.P brass grating for gully floor or Nahni trap ISI make complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x450mm (Six hundred into Four hundred fifty milimetres) size bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x20mm (Six hundred into Twenty milimetres) size C.P. Brass Towel rail Cera, Jaquuar and Hindware complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x120mm (Six hundred into One hundred twenty milimetres) glass shelf with C.P. brass. (Heavy duty makes) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) diameters long nose brass bib tap (Superior or heavy type) Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) dia long body brass bib tap (Superior or heavy type) Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing C.P. brass bib tap with capstan head (Heavy duty) Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing 15mm (Fifteen milimetres) C.P. brass angle valve without nuts and pipe Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing Mixer for kitchen sink with casted swinging spout at top Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing bath shower Cera, Jaquuar and Hindware complete with necessary fitting complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing P.V.C. connection 300x450mm (Three hundred into four hundred fifty millimetres) length with check nut and brass union Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing brass full way valve with wheel Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing brass ball valve (horizontal plunger type) high pressure with polythene plastic floats complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing 15mm (Fifteen milimetres) diametres G.I./M.I Union of for wash basin or sink complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing composite end seal compression fittings Cera, Jaquuar and Hindware as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with joint testing and fittings complete including cutting and making good the walls etc; complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing Equal Tees 1216 (One thousand two hundred sixteen)

Providing and fixing Equal Tees 2025 (two thousand twenty five)

Providing and fixing Reducing tees 1620 (One thousand six hundred twenty) all branches

Providing and fixing Reducing tees 2025 (Two thousand twenty five) with all branches

Providing and fixing Female Elbows 1620 X 15 mm thread (One thousand six hundred twenty by fifteen millimetres) thread

Providing and fixing Female Elbows 1620 X20 mm thread (One thousand six hundred twenty nto twenty millimetres) thread

Providing and fixing reducer 1620x1216mm thread (One thousand six hundred twenty by One thousand two hundred sixteen millimetres)

Providing and fixing reducer 2025x1216mm thread (two thousand twenty five by One thousand two hundred sixteen millimetres)

Providing and fixing 1000 (One thousand) litres net capacity tank (THREE LAYER SINTAX, JAI BHARAT, D-PLAST, VECTUS) PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm (Fifteen milimetres) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level (Jai bharat D-plast Vacuts equivalent) complete as per direction of Engineer-Incharge including carriage of material within all leads, lifts and other incidentals.

Providing and fixing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

110x90mm (One hundred ten into Ninety millimetres) nominal size

110x75mm (One hundred ten into seventy five millimetres) nominal size

Providing and fixing PVC spigot and socketpipes Type-B for soil waste and ventilating pipe, including fixing with approved adhesive etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

110mm (One hundred ten milimetres) diametres

50mm (Fifty milimetres) diametres

Providing and fixing 75mm (Seventy five milimetres) diametres PVC door bend with oval access door, insertion rubber washer 3mm (Three millimetres) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

110mm (One hundred ten milimetres) diametres

75mm (Seventy five milimetres) diametres

50mm (Fifty milimetres) diametres

Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

110x90mm (One hundred ten into ninety milimetres) diametres

90x75mm (Ninety into Seventy five milimetres) diametres

75x63mm (Seventy five into sixty three milimetres) diametres

Providing and fixing 610x460mm (Six hundred ten into Four hundred sixty millimetres) with bowl depth 200 mm stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PTMT Coloured/white high density polyethylene / poly propylene 10.00 ltrs (Ten litres) capacity (full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm (Fifteen millimetres) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (Forty millimetres) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing bright finished M.S. hydraulic door closer within all leads, lifts of materials and other incidentals as per approved drawing, design complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing elbow operated tap including necessary fitting complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing tap including necessary fitting complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing door handle round shape stainless steel ISO certified compaby 327x302x25 (Three hundre3d twenty sseven into three hundred two into twenty five ) complete fitting with necessary screws complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing motice lock set double lock (Harison only) complete fitting with necessary screws complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing door harison channel complete fitting with necessary screws complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing door hinges complete fitting with necessary screws complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) dia brass bib tap superior of heavy type complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred milimetres) nominal size sand cast / cast iron spun spigot and socket soil, waste and ventilating pipes (Lead caulked joints to be measured and paid for separately) complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) nominal bore CPVC Finolex, Ashirvad and Vectus pipe (Heavy Grade) tube fitting and clamps including making good the wall, ceiling and floor complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) CPVC Finolex, Ashirvad and VectusTank Nipple complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) CPVC Finolex, Ashirvad and Vectus Elbow complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) CPVC Finolex, Ashirvad and Vectus Tee complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) CPVC Finolex, Ashirvad and Vectus Socket complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) CPVC Finolex, Ashirvad and Vectus Union complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 20mm (Twenty milimetres) nominal bore CPVC Finolex, Ashirvad and Vectus pipe (Heavy Grade) tube fitting and clamps including making good the wall, ceiling and floor complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 20mm (Twenty milimetres) CPVC Finolex, Ashirvad and VectusTank Nipple complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 20mm (Twenty five milimetres) CPVC Finolex, Ashirvad and Vectus Elbow complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 20mm (Twenty five milimetres) CPVC Finolex, Ashirvad and Vectus Tee complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 20mm (Twenty five milimetres) CPVC Finolex, Ashirvad and Vectus Socket complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 20mm (Twenty five milimetres) CPVC Finolex, Ashirvad and Vectus Union complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 25mm (Twenty five milimetres) nominal bore CPVC Finolex, Ashirvad and Vectus pipe (Heavy Grade) tube fitting and clamps including making good the wall, ceiling and floor complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 25mm (Twenty five milimetres) CPVC Finolex, Ashirvad and VectusTank Nipple complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 25mm (Twenty five milimetres) CPVC Finolex, Ashirvad and Vectus Elbow complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 25mm (Twenty five milimetres) CPVC Finolex, Ashirvad and Vectus Tee complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 25mm (Twenty five milimetres) CPVC Finolex, Ashirvad and Vectus Socket complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 25mm (Twenty five milimetres) CPVC Finolex, Ashirvad and Vectus Union complete and as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Saini