Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.6 LAccepted-AOC 39 6644 PADMAKSHI BUILDING OPPOSITE COCHIN SHIPYARD ATLANTIS KOCHI KERALA 682015 | ERNAKULAM | KERALA | 682015 | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹32.5 L+₹77,143 (2.43%)Rejected-AOC INDUSTRIAL ESTATE PAPPANAMCODE THIRUVANANTHAPURAM 695019 | THIRUVANANTHAPURAM | THIRUVANANTHAPURAM | KERALA | 695019 | L2 | Rejected-AOC L2 Bidder | |
| 3 | L3₹41.7 L+₹9.9 L (31.2%)Rejected-Finance KUNNAPPILLIL BUILDING SOUTH MARADY P O MUVATTUPUZHA 686673 | MUVATTUPUZHA | ERNAKULAM | KERALA | 686673 | L3 | Rejected-Finance L3 Bidder | |
| 4 | Not Admitted-Fee/PreQual/Technical/Finance 1 260 A1 NARAN CHIRAKKAL CORPORATE PRIVATE LTD KODAMPUZHA PO FAROOK COLLEGE 99472 KOZHIKODE KERALA 673632 | KOZHIKODE | KERALA | 673632 | - | Not Admitted-Fee/PreQual/Technical/Finance Price Bid not complied |
| Sl No | Description | Qty | Unit | Forte Storage Solutions L1 | Ashly Furnishing Co Pvt Ltd L3 | SIDCO WOOD WORKING UNIT L2 |
|---|---|---|---|---|---|---|
| 1.00Chair | ||||||
| 1.01 | Three seater waiting area chair: suppling and placing of chair with following specifications, perforated metal bench -Cross beam and Leg shall be powder coated made of cold rolled steelwith 0.2 ± 0.01 cm thickness. Seat-Back shell shall be 1.2 mm thk powder-coated perforated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness. The Side Bar shall be made of powder-coated solid steel with inserts. The Shell shall be assembled on the Cross Beam with help of bolts . dimensions may range between Seat width50.0 cm- 54.5 cm per seat. Thickness of side bars is 4.5cm & gap between seats shall be min 2cm. Overall Dimensions shall be Seat Height :40.6 -44.0cm, Total Height from ground :77.5cm-91.0cm, Width & Depth of Chair as measured from ground - Width:173.5cm -176.5 cm and Depth:71 cm-74cm.Dimensions tolerance / variations shall be within +/- 1 cm. contractor shall obtain prior approval on submission of mock sample from Engineer in charge. | 12 | set | 24,658 ₹2,95,896 | 9,790 ₹1,17,480 Lowest | 11,500 ₹1,38,000 |
| 1.02 | Medium back chair :-suppling and placing of chair with following specifications,The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support at fixed position. Size of back shall be (W)46.5cm-55cm, (H)58.0cm-60.5cm & size of seat shall be (W)47cm-50 cm x (D)44.0cm-48cmn +. Armrest . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro 1 mechanism, Tilt tension adjustment. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm<br>pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP .Overall dimensions of Chair shall range, Width of Chair 70.0cm-76.5cm, Depth of Chair 70.0 cm-76.5cm as measured from pedestal below. Height from ground - min 89.5cm - 102.5cm to max 100.5cm-111.5 cm. Seat height - min 43.3-44.5 cm to max 53.5 cm-54.3cm. Dimensions tolerance / variations shall be within +/- 1 cm.Chair tested as per ANSI/BIFMA x5.1 standards. contractor shall obtain prior approval on submission of mock sample from Engineer in charge. | 60 | each | 6,541 ₹3,92,460 | 5,995 ₹3,59,700 Lowest | 6,200 ₹3,72,000 |
| 1.03 | Executive chair -Highback :- The seat shall made up of plywood and moulded polyurethane foam upholstered with fabric.Backrest assembly is of injection moulded plastic with black mesh fabric and height adjustable lumbar support pad and adjustable headrest. The moulded polyurethane foam for seat is with density=50-55 kg/m ³.The dimensions of seat shall be- 48 cm(W) x 45 cm(D) and of back shall be 46.5 cm(W) x 51.5 cm(H). Armrest has button operated height adjustment . The arm top is made of soft moulded PU with MS in sert. The mechanism of chair shall have following features:360 degree revolving type, Synchronous 1 Mechanism. The chair shall be provided with Class 4 pneumatic height adjustment which shall have stroke of 112 mm. The pedestal shall be injection moulded in black GF nylon and fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The cushioned head support is adjustable in height and angle for optimum user comfort. Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 92.5 to max 103.0 cm. Seat height - min 41 cm to max 51.5 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards | 1 | each | 11,031 ₹11,031 | 10,010 ₹10,010 Lowest | 11,500 ₹11,500 |
| 1.04 | Visitor chair (single):suppling and placing of chair with following specifications. The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support size at fixed position.Size of back shall be (W)46.5cm-55cm, (H)58.0cm-60.5cm & size of seat shall be (W)47cm-50 cm x (D) 44.0cm-48cmn +. Armrest : The arm top shall be made of soft moulded PU .The visitor base is cantilever type. Overall dimensions of Chair shall be, Width of Chair 61.0cm-70.0cm, Depth of Chair - 64.5cm- 70.0 cm as measured from pedestal below. Total Height from ground shall range from 93.5cm- 102.5 cm. Seat height - 44.5 cm-46.5cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards contractor shall obtain prior approval on submission of mock sample from Engineer in charge. | 50 | each | 5,410 ₹2,70,500 | 5,060 ₹2,53,000 | 3,900 ₹1,95,000 Lowest |
| 1.05 | Providing, supplying and placing of stool. SEAT ASSEMBLY: The seat should be made up of 1.2±0.1cm thick flat plywood and with moulded Polyurethane foam and should be . upholstered with replaceable synthetic leather covers.SEAT SIZE: Diameter 40.0 cm ADJUSTMENTS: 3600 Revolving type HIGH RESILIENCE (HR) POLYURETHANE FOAM: The_HR.polyurethane foam should be _moulded with density = 45 +1-2 kg/m3 and Hardness load 16 ± 2 kgf for 25% compression. HEIGHT ADJUSTMENT: The manual height adjustment should be very easy to operate with a help of a knob.. It can be easily locked at the most comfortable position.PEDESTAL ASSEMBLY: The five-prong pedestal should be fabricated from 0.2 ± 0.02 cm thick HR sheet( should be : DD 10791 HR ), powder coated ( OFT 40-60 microns )and fitted with an injection moulded black Polypropylene Hub Cap and 5 nos. twin wheel castors. The pedestal should be 55.0±0.5cm pitch-circle diameter (65.0±1.0cm with castors).TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in Black Nylon.Seat size- dia 40.0cm Adjustments- 3600 degree revolving type Width- 65.0cm Depth- 65.0 cm Seat Height- 45.0 to 56.5cm | 120 | each | 3,081 ₹3,69,720 Lowest | 3,500 ₹4,20,000 | 5,500 ₹6,60,000 |
| 1.06 | Jefferson chair made of Hard wood with chair plank seat and back. Wooden writing pad without arm rest,writing pad fixed (Breadth 230mm) seat size 520x510x530 mm back full chair length 915mm, seat height 458 mm. | 175 | each | 4,050 ₹7,08,750 | 3,800 ₹6,65,000 | 3,400 ₹5,95,000 Lowest |
| 1.07 | Writing table made of Hard wood (700mm x 550mm x 750 mm)(LxBxH) | 200 | each | 3,335 ₹6,67,000 Lowest | 7,900 ₹15,80,000 | 3,500 ₹7,00,000 |
| 1.08 | Armless chairs made of Hard wood for writing table wooden seat and back | 200 | each | 2,295 ₹4,59,000 Lowest | 3,800 ₹7,60,000 | 2,900 ₹5,80,000 |
Tender Value
₹34.1 L
EMD Value
₹50,000
Closing Date
18 Aug 2025, 3:00 pmClosed
Managing Director, INKEL Limited
1st Floor, Ajiyal Complex, Post Office Road, Kakkanad - 682030
Supply of Chairs
2025_INKEL_782506_1
NIT/INKEL/KIIFB/2025-26/166 dated 04/08/2025
Open Tender
Miscellaneous Works
Item Rate
90 days
Govt. Medical College Thiruvananthapuram
As per NIT
5 documents required · 5 mandatory
₹2,950
₹50,000
14 Oct 2025
4 Aug 2025
20 Aug 2025
5 Aug 2025
18 Aug 2025
11 Aug 2025
Amount
Chair
Three seater waiting area chair: suppling and placing of chair with following specifications, perforated metal bench -Cross beam and Leg shall be powder coated made of cold rolled steelwith 0.2 ± 0.01 cm thickness. Seat-Back shell shall be 1.2 mm thk powder-coated perforated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness. The Side Bar shall be made of powder-coated solid steel with inserts. The Shell shall be assembled on the Cross Beam with help of bolts . dimensions may range between Seat width50.0 cm- 54.5 cm per seat. Thickness of side bars is 4.5cm & gap between seats shall be min 2cm. Overall Dimensions shall be Seat Height :40.6 -44.0cm, Total Height from ground :77.5cm-91.0cm, Width & Depth of Chair as measured from ground - Width:173.5cm -176.5 cm and Depth:71 cm-74cm.Dimensions tolerance / variations shall be within +/- 1 cm. contractor shall obtain prior approval on submission of mock sample from Engineer in charge.
Medium back chair :-suppling and placing of chair with following specifications,The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support at fixed position. Size of back shall be (W)46.5cm-55cm, (H)58.0cm-60.5cm & size of seat shall be (W)47cm-50 cm x (D)44.0cm-48cmn +. Armrest . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro 1 mechanism, Tilt tension adjustment. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm<br>pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP .Overall dimensions of Chair shall range, Width of Chair 70.0cm-76.5cm, Depth of Chair 70.0 cm-76.5cm as measured from pedestal below. Height from ground - min 89.5cm - 102.5cm to max 100.5cm-111.5 cm. Seat height - min 43.3-44.5 cm to max 53.5 cm-54.3cm. Dimensions tolerance / variations shall be within +/- 1 cm.Chair tested as per ANSI/BIFMA x5.1 standards. contractor shall obtain prior approval on submission of mock sample from Engineer in charge.
Executive chair -Highback :- The seat shall made up of plywood and moulded polyurethane foam upholstered with fabric.Backrest assembly is of injection moulded plastic with black mesh fabric and height adjustable lumbar support pad and adjustable headrest. The moulded polyurethane foam for seat is with density=50-55 kg/m ³.The dimensions of seat shall be- 48 cm(W) x 45 cm(D) and of back shall be 46.5 cm(W) x 51.5 cm(H). Armrest has button operated height adjustment . The arm top is made of soft moulded PU with MS in sert. The mechanism of chair shall have following features:360 degree revolving type, Synchronous 1 Mechanism. The chair shall be provided with Class 4 pneumatic height adjustment which shall have stroke of 112 mm. The pedestal shall be injection moulded in black GF nylon and fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The cushioned head support is adjustable in height and angle for optimum user comfort. Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 92.5 to max 103.0 cm. Seat height - min 41 cm to max 51.5 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards
Visitor chair (single):suppling and placing of chair with following specifications. The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support size at fixed position.Size of back shall be (W)46.5cm-55cm, (H)58.0cm-60.5cm & size of seat shall be (W)47cm-50 cm x (D) 44.0cm-48cmn +. Armrest : The arm top shall be made of soft moulded PU .The visitor base is cantilever type. Overall dimensions of Chair shall be, Width of Chair 61.0cm-70.0cm, Depth of Chair - 64.5cm- 70.0 cm as measured from pedestal below. Total Height from ground shall range from 93.5cm- 102.5 cm. Seat height - 44.5 cm-46.5cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards contractor shall obtain prior approval on submission of mock sample from Engineer in charge.
Providing, supplying and placing of stool. SEAT ASSEMBLY: The seat should be made up of 1.2±0.1cm thick flat plywood and with moulded Polyurethane foam and should be . upholstered with replaceable synthetic leather covers.SEAT SIZE: Diameter 40.0 cm ADJUSTMENTS: 3600 Revolving type HIGH RESILIENCE (HR) POLYURETHANE FOAM: The_HR.polyurethane foam should be _moulded with density = 45 +1-2 kg/m3 and Hardness load 16 ± 2 kgf for 25% compression. HEIGHT ADJUSTMENT: The manual height adjustment should be very easy to operate with a help of a knob.. It can be easily locked at the most comfortable position.PEDESTAL ASSEMBLY: The five-prong pedestal should be fabricated from 0.2 ± 0.02 cm thick HR sheet( should be : DD 10791 HR ), powder coated ( OFT 40-60 microns )and fitted with an injection moulded black Polypropylene Hub Cap and 5 nos. twin wheel castors. The pedestal should be 55.0±0.5cm pitch-circle diameter (65.0±1.0cm with castors).TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in Black Nylon.Seat size- dia 40.0cm Adjustments- 3600 degree revolving type Width- 65.0cm Depth- 65.0 cm Seat Height- 45.0 to 56.5cm
Jefferson chair made of Hard wood with chair plank seat and back. Wooden writing pad without arm rest,writing pad fixed (Breadth 230mm) seat size 520x510x530 mm back full chair length 915mm, seat height 458 mm.
Writing table made of Hard wood (700mm x 550mm x 750 mm)(LxBxH)
Armless chairs made of Hard wood for writing table wooden seat and back
SIDCO WOOD WORKING UNIT (BID ID -2291182)
Ashly Furnishing Co Pvt Ltd (BID ID -2292972)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .