Construction of Phina Singh Multipurpose project in Tehsil Nurpur District Kangra HP

Amount

Schedule-1 Construction of Concrete Gravity Dam for Phina Singh Project in Himachal Pradesh. Survey, Soil and Geotechnical Investigations, Soil Stability Analysis, preparation and submission of reports for complete job of all componenet of Dam, Intake, Connencting Bridge including surge Tank as per the directions of Engineer-in-Charge complete in all respects.

Preparation, submision,vetting from CWC and approval of Architectural, Functional, Hydraulic, Civil, Structural, Electrical, Instrumentation and Control System designs, drawings and reports of remaining Civil Works, Hydromechanical components, complete in all respects as per codes, standards and guidelines to the entire satisfaction of Engineer-in-Charge for all Compoments i.e.. i) Dam and all of its associated components such as NOF and OF Sections of Dam Body, Gravity Wall(s), Intake Structure, Connecting Bridge, Connecting arrangement of Intake with already constructed tunnel, desilting and dredging arrangements, upstream and downstream protection structures, control room, Hydraulic, Mechanical, Fabrication/Shop drawing including automation of all gates /sluices, Hoisting and operating system of all Hydromechanical equipment for all structures, Design and drawings of Lighting, Electrical, Instrumentation, Control System and SCADA systems for dam and surge tank complete in all respects. ii) Surge Tank and its associated components such as connection to outlet of tunnel and to main canal, provisions for connenctions to proposed Hydropower plant, desilting and dredging arrangements of Tunnel and Surge Tank including provision for ingress inside tunnel for mechanical cleaning of tunnel by means of small excavator/loader complete in all respects.

Earth work in excavation in all kinds of soils by mechanical means (Hydraulic excavators) in foundations, foundation trenches, drains etc including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil, including dewatering to any extent within all leads and lifts as per the direction and satisfaction of Engineer-In-Charge.

Filling /Banking all surplus excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments as directed by Engineer - in - Charge. upto all leads and lifts.

Providing and laying/filling filter sand of approved quality, grade and specifications as Filter Media in upstream or downstream of the dam with complete dressing of filled up area within all leads and lifts, as per the specifications/directions and satisfaction of Engineer-In-Charge.

Providing and laying/filling filter gravels/aggregates of approved quality, grade and specifications as Filter Media in upstream or downstream of the dam with complete dressing of filled up areas within all leads and lifts, as per the specifications/directions and satisfaction of Engineer-In-Charge.

Providing & Laying Stone Pitching in upstream or downstream of the dam with complete dressing within all leads and lifts, as per the specification/directions and satisfaction of Engineer-In-Charge.

Construction of Dykes/Cofferings/Coffer Dam for diverting water of Khad/River for construction of dam including its maintenance and upkeep till completion of dam as per the specification/directions and satisfaction of Engineer-In-Charge within all leads and lifts.

Drilling holes for grouting with spacing and specifications as approved, upto specified depth/direction using suitable machinary including cleaning of holes by washing with water at required pressure and then drying the holes with air pressure, including all the necessary arrangements, material, labour, etc. as per approved drawing by CWC or as per direction of the Engineer-In-Charge within all leads and lifts.

Grouting in drilled holes under pressure as per BIS specifications in accordance with IS:6066(Latest Edition ) under close guideance of geologist and procedure adopted at site as directed by the Engineer-in-Charge with cement slurry, including pre and post permeability test, including cost of the material, labour, machinery re-drilling, if required, complete job as per approved drawings and specifications as direction of the Engineer-In-Charge within all leads and lifts.

Prov. Form work with steel plates so as to give a fair finish including centring, shuttering, strutting & propping etc. work in : -

Vertical surfaces such as walls (any thickness) partitions & the like including attached pillasters, buttresses plinth and string courses and the like : within all leads and lifts, straight or curved in section/elevation as per the direction of Engineer-In-Charge.

In Circular or Curved surface In Plan within all leads and lifts as per the direction of Engineer-In-Charge.

Flat surfaces up to 200 mm in thickness : within all leads and lifts as per the direction of Engineer-In-Charge.

Providing and laying in position machine batched and machine mixed design mix M-15 grade Temperature controlled cement concrete for cement concrete work, using cement content as per approved design mix, including transportation/pumping of concrete to site of laying as per approved method of placement, compaction by rolling or vibrating as per approved method but excluding the cost of centering, shuttering and reinforcement, including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability of concrete as per Drawing/design/specification or as per direction of Engineer-incharge.

Providing and laying in position machine batched and machine mixed design mix M-20 grade Temperature controlled cement concrete for cement concrete work, using cement content as per approved design mix, including transportation/pumping of concrete to site of laying as per approved method of placement, compaction by rolling or vibrating as per approved method but excluding the cost of centering, shuttering and reinforcement, including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability of concrete as per Drawing/design/specification or as per direction of Engineer-incharge.

Providing and laying in position machine batched and machine mixed design mix M-25 grade Temperature controlled cement concrete for cement concrete work, using cement content as per approved design mix, including transportation/pumping of concrete to site of laying as per approved method of placement, compaction by rolling or vibrating as per approved method but excluding the cost of centering, shuttering and reinforcement, including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability of concrete as per Drawing/design/specification or as per direction of Engineer-incharge.

Providing and laying in position machine batched and machine mixed design mix M-30 grade Temperature controlled cement concrete for cement concrete work, using cement content as per approved design mix, including transportation/pumping of concrete to site of laying as per approved method of placement, compaction by rolling or vibrating as per approved method but excluding the cost of centering, shuttering and reinforcement, including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability of concrete as per Drawing/design/specification or as per direction of Engineer-incharge.

Providing and laying in position machine batched and machine mixed design mix M-60 grade Temperature controlled cement concrete for cement concrete work, using cement content as per approved design mix, including transportation/pumping of concrete to site of laying as per approved method of placement, compaction by rolling or vibrating as per approved method but excluding the cost of centering, shuttering and reinforcement, including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability of concrete as per Drawing/design/specification or as per direction of Engineer-incharge.

Providing & fixing in position high yield strength deformed (HYSD) or Thermo-Mechanically Treated steel reinforcement bars including straightening, bending hooking and placing in position complete within all leads and lifts as per thedirection and satisfaction of Engineer- In-Charge.

Construction of Tool room cum Control Room/Attandent Room including submission and approval of Architectural, Structural, Functional, Interior Drawings & Electrical, HVAC, Control systems drawings of Tool room and control room with machinary/appurtenances/appliances detail including Electrical and sanitary fittings, construction and commissioning complete in all respects with in all leads and lifts as per the direction and satisfation of Engineer -In-Charge.

Wire crates of G.I wire filled with bolders with square cut faces against the wire (Bolder filling to be measured and paid for separately) with G.I wire 4mm thick, 100mm x100mm mesh size, wire crate 1.25m x 1.25m x 1.25m size complete in all respects as per directions and satisfaction of Engineer-in-charge.

Wire crates of G.I wire filled with bolders with square cut faces against the wire (wire crates to be measured and paid for separately) wire crate 1.25m x 1.25m x 1.25m size within all leads and lifts as per the directions and satisfaction of Engineer-in-charge.

Providing and Placing in Position PVC water stop seal conforming to IS:12200 for construction/ expansion joints between two cement concrete members of required size etc. 10 to 12mm thick within all leads and lifts as per the specifications , directions and satisfaction of Engineer-In-Charge.

P/L & Jointing Of RCC Pipe 200mm dia complete in all respets within all leads and lifts as per the direction and satisfaction of Engineer-In-Charge.

Providing Laying Jointing and testing of Ductile Iron Pipe (Spigot and socketed including all accessories, fittings, end cap, puddles and perforations etc) Pipe 600mm class K-7 dia complete in all respets within all leads and lifts as per the direction and satisfaction of Engineer-In-Charge. (Perforated DI Pipe with puddle coller and end cap to be used as inlet port of Intake Well)

Providing Laying Jointing and testing of Ductile Iron Pipe (Spigot and socketed including all accessories and fittings) Pipe 900mm class K-9 dia complete in all respets within all leads and lifts as per the direction and satisfaction of Engineer-In-Charge. (DI Pipe with puddle coller proposed to be used as outlet port of Surge Tank and for supply to proposed Power House)

Providing & fixing railing with G.I. pipe 32mm dia (Medium class) in three rows embedded in RCC posts complete in all respects with in all leads and lifts as per direcion of the Engineer-In-Charge.

P/F G.I. pipe 80mm dia of medium class complete in all respects within all leads and lifts as per the direction and satisfaction of Engineer-In-Charge.

Providing and fixing in position 20mm thick bitumen impregnated fiber board conforming to IS: 1838,including cost of primer,sealing compound Grade-A in expansion joints within all leads and lifts as per the direction and satisfaction of Engineer-In-Charge.

P/F Rain Drop Iron Mesh flat strip for 80mm dia G.I. pipe as per the direction and satisfaction of Engineer-In-Charge.

Providing and Fixing suitable bearings (as vetted in drawings and approved by the Engineer-in-Charge) for connecting bridge bearing complete in all respects as per specifications within all leads and lifts as per the direction and satisfaction of Engineer-In-Charge..

P/F gates of dam, stoplogs, screens ,under sluices ,hoisting gantry , emergency and service gate of HRT, gates of intake well and Surge tank gates complete as per specifications including design, Fabrication, Transportation, errection, testing and commissioning in all respects, as per the direction and satisfaction of Engineeer in charge.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of Submerged Radial Gate (7.0m x 6.20m) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Procurement, Transportation, Erection, Testing and Commissioning of Hydraulic Hoist of suitable capacity and stroke length of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of Stoplog Gate (7.0m x 8.8m) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of Embedded Parts for Stoplog gates including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of Gantry Crane of suitable capacity with 70 mtr rail, fixtures and lifting beam of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of HRT Emergency Gates (2.4m x 2.70m) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of suitable capacity RDH for HRT Emergency Gate (2.4m x 2.70m) of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of HRT Service Gate (2.4m x 2.70m) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of suitable capacity RDH for HRT Service Gates (2.4m x 2.70m) of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of Gates for connection of Surge Tank to main Canal (3.0m x 2.40m) and valves/gates for outlet ports of 900mm dia DI Pipe (i) to power house and (ii) to scour arrangement including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of suitable capacity (min 25 MT capacity or more) RDH Hoist for Surge Tank main canal gate (3.0m x 2.40m) and for control of DI Pipe outlets of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of Surge Tank Penstock (3.0m x 2.40m) for control of Penstock outlets of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of suitable capacity (min 25 MT capacity or more) RDH for Surge Tank penstock gate (3.0m x 2.40m)and for control of Penstock outlets of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational

Design, Fabrication, Transportation, Erection, Testing and Commissioning of Escape at Intake Penstock (2.0m x 2.0m) for control of Penstock gate outlets of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of suitable capacity (min 15 MT capacity or more) RDH for Escape at Intake penstock gate (2.0m x 2.0m) for control of Penstock outlets of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational

Design, Fabrication, Transportation, Erection, Testing and Commissioning of Stoplog Escape at Intake Penstock (2.0m x 2.0m) for control of Penstock gate outlets of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of suitable capacity (min 15 MT capacity or more) RDH for Stoplog Escape at Intake penstock gate (2.0m x 2.0m) for control of Penstock gate outlets of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of Gates for Distributaries (2.25m x 2.0m) for control of Distributary gate outlets of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of 5 MT capacity of RDH for Gates for Distributaries (2.25m x 2.0m) for control of Distributary gate outlets of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of Gates for Minors (2.0m x 2.0m) for control of gate minor outlets of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of suitable capacity (min 5 MT capacity or more) RDH for Gates for Minors (2.0m x 2.0m) for control of gate minor outlets of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of Gates for Escape Distributary (2.0m x 2.0m) for control of Distributary gate outlets of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Design, Fabrication, Transportation, Erection, Testing and Commissioning of suitable capacity (min 5 MT capacity or more) RDH for Gates for Escape Distributary (2.0m x 2.0m) for control of Distributary gate outlets of reputed make (to be decided by Engineer-in-Charge) including all accessories, embedded parts/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing Furniture, Laptops, Printers, Plotters, Invertors/UPS, battery etc in Scada Control System and CCTV Etc. as specified under Clause 5.1 of Technical Specifications and elsewhere in tender documents within all lead and lift as per entire satisfection of Engineer - In - Charge.

Electrical and related systems

Providing and Erecting Power distribution panel at DG Room including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erecting Power distribution panel at Control Room including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erecting Lighting distribution panel at Control Room including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erecting Radial gate power supply system including cable, cable tray, accessories etc. including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erecting gantry crane power supply system including cable, cable tray, power take off point, accessories etc. including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erecting HR gate power supply system including cable, cable tray, power take off point, accessories etc. including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erecting Main cable from DG room to control room with trench or cable tray & accessories etc. including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erecting Lighting system, Led light pole, Foundation, earthing, power supply cable and accessories. including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erecting High mast Lighting system, 20mtr. Highmast with Led light, pole, Foundation, power supply cable and accessories. including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erecting earthing to panels, gate hoisting system, HR Gate, Ganrty, High mast etc. including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erecting Lighting arrestor at DG room, Control room, HR room etc. including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erecting 5 HP, Siren at control room with cable, foundation, cover and accessories. including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Automation, SCADA and Instrumentation etc . Providing and Erecting Scada system for Radial gate and HR gate including, (1) Main Control Panel - 1No. Includes PC, PLC, Scada Software. (2) GLU Panel - 5No. Includes panel, 4" HMI, VFD, Encoder limit switch etc. (3) Accessories 3 core shielded cable, Communication wires, cable tray, Pipes, Ethernet switch etc. including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Joint meter for vertical foundation measurement JMV. 100 mm measuring range. with additional 5 mtr (or as required as per site conditions complete in all respects) cable including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Internal joint meter (IJM) 100 mm measuring range. with additional 10 mtr (or as required as per site conditions complete in all respects) cable including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Triaxial Joint Meter. 100 mm measuring range. with additional 18 mtr (or as required as per site conditions complete in all respects) cable including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Joint meter for surface joint measurement (JM). 100 mm measuring range. with additional 3 mtr (or as required as per site conditions complete in all respects) cable including all accessories/ items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Stress meter (S-1) . (VW Shortcrete Pressure Cell). 35 Bar With additional 5 mtr (or as required as per site conditions complete in all respects) cable including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Strain meter (for Group of Five), with additional 5 mtr (or as required as per site conditions complete in all respects) cable 12 core including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of No Stress Strain Meter with additional 5 mtr (or as required as per site conditions complete in all respects) cable including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Vibrating wire Piezometer (Pore Pressure Cell).with additional 5 mtr (or as required as per site conditions complete in all respects) cable. including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Uplift Measuring Device (VW Uplift Pressure measuring System) with additional cable 5 mtr (or as required as per site conditions complete in all respects) including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Multi Point Bore Hole Extensometer MPBX (Three Point VW) for depth upto 30-35m (Depth of Anchors: 5,10,15 ,25,35 mm) Range ± 50mm =100mm. With additional 5 mtr additional 12 core cable (or as required as per site conditions complete in all respects)

Providing and Erection of Temperature Meter (TM) VW with additional 5 mtr cable (or as required as per site conditions complete in all respects) including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Direct Pendulum (Normal Plumbline) including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Indirect pendulum (Inverted Plumbline) including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Strong Motion Accelerograph (STRONG MOTION ACCELEROMETER. Make: ES&S, Australia /Guralp, UK) including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Tilt meter (T) VW with 5 meter additional Cable (or as required as per site conditions complete in all respects) including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of MAGNETIC RING BOREHOLE EXTENSOMETER 37.5 measurement at 2.5m C/C including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Readout Reel, Battery Operated portable with electric cable 50m long with sensing probe including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Piezometer VW with additional 15 mtr (or as required as per site conditions complete in all respects) cable including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Standpipe Piezometer for depth upto 41.6 mtr (or as required as per site conditions complete in all respects) including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Armoured jelly filled cable 2 pair (4 core) including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of Armoured jelly filled cable 6 pair (12 core) including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Providing and Erection of PVC Cable Splicing Kit including all accessories/items and all other electrical and control components as vetted by CWC to make it fully functional and operational.

Schedule-2 Construction of Distributory D-1 Providing /Laying and Jointing of DI pipes of Various Diameters, pipe crossing Bridge, Delivery Tanks, Anchor Blocks and Outlets Chambers etc.) Earth work in excavation in all kinds of soils by mechanical means (Hydraulic excavators) in foundations, foundation trenches, drains etc including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil , Including dewatering to any extent within all leads and lifts as per the direction and satisfaction of Engineer-In-Charge.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m.

Providing and Laying cement concrete 1:4:8 ( 1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) excluding cost of form work in foundation and plinth with all leads and lifts as per direction of the engineer in charge.

Providing and laying in position machine batched and machine mixed design mix M-20 grade for cement concrete works, using cement content as per approved design mix, including transportation/pumping of concrete to site of laying as per approved method of placement, compaction by rolling or vibrating as per approved method but excluding the cost of centering, shuttering and reinforcement, including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability of concrete as per Drawing/ design/ specification or as per direction of Engineer-incharge. :--

In foundation footing and plinth.

In walls any thickness but not less than 0.10 mtr. tickness) i/c attached buttress, pillasters plinth.

In suspended floor roof landing and shelves and their support balconies beams girders , breassumers and cantilevers up to floor two level .

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for cement concrete work, using cement content as per approved design mix, including transportation/pumping of concrete to site of laying as per approved method of placement, compaction by rolling or vibrating as per approved method but excluding the cost of centering, shuttering and reinforcement, including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability of concrete as per Drawing/design/specification or as per direction of Engineer- incharge

Columns, pillars posts and struts upto two floor levels with in all leads and lifts as per the direction of engineer -in -charge. upto 6 m staging height .

Columns, pillars posts and struts upto two floor levels with in all leads and lifts as per the direction of engineer -in -charge. upto 6 to 12 mtr staging height .

Providing Form work with steel plates so as to give a fair finish including centring, shuttering, strutting & propping etc. work in : -

Vertical surfaces such as walls (any thickness) partitions & the like including attached pillasters, buttresses plinth and string courses and the like : within all leads and lifts, straight or curved in section/elevation as per the direction of Engineer-In-Charge.

IFlat surfaces up to 200 mm in thickness : within all leads and lifts as per the direction of Engineer-In-Charge.

Columns, Pillars posts and struts ( In Circular or Curved surface In Plan ) from 4 to 7 mtr within all leads and lifts as per the direction of Engineer-In-Charge.

Columns, Pillars posts and struts ( In Circular or Curved surface In Plan ) from 7 to 10 mtr within all leads and lifts as per the direction of Engineer-In-Charge.

Providing & fixing in position high yield strength deformed (HYSD) or Thermo- Mechanically Treated steel reinforcement bars including straightening, bending hooking and placing in position complete within all leads and lifts as per thedirection and satisfaction of Engineer- In-Charge.

Providing and fixing in position 20mm thick 250 mm wide bitumen impregnated fiber board conforming to IS: 1838,including cost of primer,sealing compound Grade-A in expansion joints within all leads and lifts as per the direction and satisfaction of Engineer-In-Charge.

Providing in RCC work smooth finishing of the exposed surface with cement mortor 1:3(1 cement : 3sand) within all leads and lifts and as per direction of the Engineer-in-carge.

Steel work welded in built up sections, trusses & framed work i/c cutting, hoisting & fixing in position & applying a priming coat of red paint:- In grating, framed, guards, bars, ladders, railling, brackets & simillar works.

Providing & laying in trenches GMS/MS Tubes (L/M class) tube fitting (Earth work in trenches to be measured & paid for separately)150mm dia.

Providing & fixing CI Sluice valve (with hand wheel) as per IS: 780-1984 class - I ( PN-1) including all required fitting and accessories complete in all respects for operation of valves including spool pieces/tail pieces, gaskets, mating flanges, rubber baloons, rubber gaskets etc. as required including brass spindle & as per 2906-1984 class-II for dia> 300mm) complete with bolts nuts, rubber insertion etc. with in all lead and lift .

150mm (For delivery Tank)

150mm (For out let chamber)

300mm (For scour Pipe)

Providing and Fixing of D.I Kinetic air valve as per IS 14845-2000 (PN-1.0) , 100 mm & as sport with pieces Mating flanges as required complete as per direction of Engineer-in-charge

Constructing chamber for sluice valve, with CI surface box 100mm top dia, 160mm bottom dia & 180mm deep(inside) with chained lid RCC top 1:2:4 mix (1cement :2sand :4graded stone aggregate 20mm nominal size) 100mm thick foundation concrete 1:5:10 mix (1cement : 5sand: 10graded store aggregate 40mm nominal size) & inside plastering with cement mortor 1:3(1cement: 3sand) finished with a coat of neat cement i/c curing complete, 600x600x750mm inside size with 150mm thick walls of RCC 1:2:4(1cement: 2sand: 4graded stone aggregate 20mm nominal size) complete with form work & reinforcement with 6mm bars at not exceeding 150mm centres both ways.

Provding & fixing C.I. Man hole cover with frame of size 560mm internal dia. weight of the lid and frame should not be less than 116 kg .

Providing and laying in position machine batched and machine mixed design mix M-15 grade cement concrete for cement concrete work, using cement content as per approved design mix, including transportation/pumping of concrete to site of laying as per approved method of placement, compaction by rolling or vibrating as per approved method but excluding the cost of centering, shuttering and reinforcement, including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability of concrete as per Drawing/ design/ specification or as per direction of Engineer-incharge.

In foundation and plinth within all lead and lifts.

in lintels, beams, girders bressumers and cantilevers upto floor two level within all leads and lifts.

Providing and laying in position machine batched and machine mixed design mix M-10 grade cement concrete for cement concrete work, using cement content as per approved design mix, including transportation/pumping of concrete to site of laying as per approved method of placement, compaction by rolling or vibrating as per approved method but excluding the cost of centering, shuttering and reinforcement, including cost of admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability of concrete as per Drawing/design/specification or as per direction of Engineer-incharge.

Providing Laying , jointing & Testing of DI Pipe (Spigot and socketted ) pipes with S.B.R. (tyton push on joints), including transport of pipe from factory to site of work, cost of back filling & extra earth disposal fitting ,cost of utility shifting & Nallah crossing, Drain water ways crossing, cost of dewatering/ sand filling trench, cost of Hydrotesting ,cost of road crossing complete in all respect as per IS:8329-2000 Class K-9 with upto date amendment as per dimension, weight and test pressures in all respect to the entire satisfaction of Engineer in charge .

D.I Pipe 900 mm dia ( Spigot and socketted ) , Class - K-9 , RD 0/0 to 4170 = 4170 M

D.I Pipe 500 mm dia ( Spigot and socketted ) , Class - K-9 , RD 4170 to 7104 = 2934 M

D.I .Hard seated sluice valve as per IS 14846-2000 (P.N-1.0) Manually gear operated including all required fitting and accessories complete in all respects for operation of valves including spool pieces/tail pieces, gaskets, mating flanges, rubber baloons, rubber gaskets etc. as required including spindle complete with bolts nuts, rubber insertion etc. for successful operation of valves of Dia 900 mm diameters.

D.I .Soft seated sluice valve as per IS 14846-2000 (P.N-1.0) Manually gear operated including all required fitting and accessories complete in all respects for operation of valves including spool pieces/tail pieces, gaskets, mating flanges, rubber baloons, rubber gaskets etc. as required including spindle complete with bolts nuts, rubber insertion etc. for successful operation of valves of Dia 500 mm diameters.

Providing and Fixing of D.I Double Socket Bend of Class K-12 (Spigot and socketted) with in all lead and lift of following diameters.

D.I TEE 900 X900x100 mm dia ( Spigot and socketted ) , Class - K-12 with out let & flange

D.I TEE 900 X900x150 mm dia ( Spigot and socketted ) , Class - K-12

D.I TEE 900 X900x300 mm dia ( Spigot and socketted ) , Class - K-12 with out let & flange

D.I TEE 500 X500x100 mm dia ( Spigot and socketted ) , Class - K-12

D.I TEE 500 X500x150 mm dia ( Spigot and socketted ) , Class - K-12

D.I TEE 500 X500x300 mm dia ( Spigot and socketted ) , Class - K-12

D.I TEE 500 X500x500 mm dia ( Spigot and socketted ) , Class - K-12

Providing and Fixing of D.I reducer 900x500mm dia (Spigot and socketted) class K-12 with in all lead and lift .

Providing and fixing of D.I kinetic air valve as per IS 14845-2000 (PN-1.0) , 200 mm & as sport with pieces Mating flanges as required complete as per direction of Engineer-in-charge

Providing and Fixing of DI Double socket bend of class K-12 (Spigot and socketted ) with in all lead and lift of following diameters :

D.I Double Socket Bend 45 degree 900 mm dia

D.I Double Socket Bend 22.5 degree 900 mm dia

D.I Double Socket Bend 11.25 degree 900 mm dia

D.I Double Socket Bend 45 degree 500 mm dia

D.I Double Socket Bend 22.5 degree 500 mm dia

D.I Double Socket Bend 11.25 degree 500 mm dia

Consultancy charges for design/drawings, soil investigation and re-survey charges of entire pipeline route/crossing/all tanks etc, Design of Pipe lines, Structural Design of all Civil works as per norms, codes and guidelines including getting designs vetted from IIT Delhi/ IIT Roorkee/ NIT Hamirpur or as directed by the Engineer-in-Charge and securing approval of design and drawings from competent authority of the department, construction testing and commissioning of Distributory D-1 including all contingent civil, mechanical and piping works with defect liability period of six months after commissioning of all works in Schedule-2.

Schedule-3 Operation and maintenance for a period of Five (5) years. Annual repair and Operation and Maintenance of complete project fully automated encompassing laboratory, automation and control Project/ station i.e. SCADA system including allied accessaries, transformers, civil, and hydromechanical equipment. The project shall be operated and maintained by deploying sufficient staff strength (skilled /unskilled) as per departmental norms to the entire satisfaction of Engineer -in -charge for period of 5 years after successful commissioning and trial and test period.

OM INFRA LIMITED (BID ID -519061)

LCC Projects Limited (BID ID -518339)

Sarthi Construction and Infra Private Limited (BID ID -515011)

JWIL INFRA LIMITED (BID ID -515135)