supply supply of materials and labour work for CCTV project at High Court (EKM)

Amount

SUPPLY OF MATERIALS AND LABOUR WORK FOR CCTV PROJECT AT HIGHCOURT KERALA (ERNAKULAM)

SUPPLY PART

Supply of ISI marked 6 core Single mode outdoor purpose OFC .MAKE : Molex

Supply Of ISI marked 25mm Medium PVC conduits (Ivory) with suitable bend, coupling, saddle, screws ,Junction box, Collars, flexible hose etc (all PWD Standard- all accessories is under the scope of supplier) MAKE : Presion,Balco,Toms

Supply Of ISI marked 20mm Medium PVC conduits (Ivory) with suitable bend, coupling, saddle, screws ,Junction box, Collars, flexible hose etc (all PWD Standard- accessories is under the scope of supplier) MAKE : Presion,Balco,Toms

Supply Of ISI marked PVC cable trunk of dimension 100 mm X 50 mm connector,endcap,inner angle ,outer angle etc to be hanged from top with treaded hanger bolts with necessary fastners with bottom support on trunking in a spacing of one meter(all PWD Standard- accessories is under the scope of supplier) MAKE : Presion,Balco,Toms

Supply Of ISI marked 32mm/40mm emulsion impregnated HDPE pipe for under ground laying for mechnical protection to OFC cable conforming to IS14930partII with suitable bend, coupling, saddle, screws ,Junction box, Collars, flexible hose etc (all PWD Standard- accessories is under the scope of supplier)

Supply of (4x4) Modular PVC Box with top plate.legrand,Crabtree,Colors,ABB or equivalent in performance (All PWD Standard accessories under the scope of supplier) MAKE : legrand,Crabtree,Colors,ABB or equivalent

Supply of CCTV control Room including Supply, Installation,Testing and commissioning of Customized Console desk (H X W X L - 750 mm 600 mm X 3000 mm) Desk with provision of placing 6 nos. of Monitors (32 inch) on Monitor Mount,3 nos of keyboard/mouse/sliding Trays/chairs.Extruded AL profile structure with MS (2 mm) Top and Bottom frame. laminated 26mm(+ 1mm) MDF board side panels (Fixed side panel)and laminated 18 mm (-1 mm)MDF Board frond and rear modesty (openable front and rear modesty with push Locks).Table Top in 12 mm solid Acrylic panel on 26 mm (+-1 mm) MDF Board and Monitor Base in Laminated 18 mm (=1 mm) MDF Board. both Horz and vertical managers for routing lan and power cables, power Distribution sockets within the Desk. and 3 nos of high back chairs & Videowall setup

Supply of RJ 45 Connector with Strain Relief Boots boot MAKE : MOLEX

Supply of 19" 6U ,IP 56 rated Outdoor rack with covered wire manager, cooling fan, AC distribution box andall other accessories.Preferred MAKE : NETRACK(600mm x 500mm)

Supply of 6 mts GI Pole(Class B) with 80 mm base diameter fixed in a concrete footing of minimum height 75 cm properly finished with painting (primer with 2 coat paint) with camera mounting option MAKE : TATA/JINDAL

Supply of 23AWG Cat6 UTP Cable,Warrenty 10 years MAKE : MOLEX

Supply of 1 M Cat 6 factory crimped Patch chord with (Printed PVC cable identifing label/Tags) Preferred MAKE : MOLEX

Supply of UL Certified 19" 6U (600mm depth) rack with covered wire manager, cooling fan 2 nos,AC distribution box and all other accessories MAKE : NETRACK

Supply of UL Certified 19" 800 x1000 mm 42U rack with covered wire manager, cooling fan 4 nos, 2 Nos AC distribution box 6 Nos round Indian socket having surge protection, mcb and all other accessories MAKE : NETRACK

Supply of Duplex SC/UPC-LC/UPC patch chord 1 mtr (Printed PVC cable identifing label/Tags) MAKE : MOLEX

Supply of SITC of 6 Port fully loaded 1 U Rack Mountable LIU with Splicing tray ,pigtails and cable management, Warrenty 5 Years MAKE : MOLEX

Supply of SITC of 24 Port fully loaded 1 U Rack Mountable LIU with Splicing tray ,pigtails and cable management, Warrenty 5 Years MAKE : MOLEX

Supply of 23AWG Cat-6, 8 port patch panel MAKE : MOLEX

Supply of 23AWG Cat-6, 24 port patch panel MAKE : MOLEX

Supply of industrial grade 80SWG PVC insulated GI Taut/ staywire

LABOUR PART

Fixing, Termination and Focusing of Cameras on wall/Pole using PWD Standard- Nut & Bolt or Fishers and screws under the scope of supplier and each camera should do printed ferrule label (As per the standards and customer requirements)

Fixing, Termination of PTZ Cameras on wall/Pole using PWD Standard- Nut & Bolt or Fishers and screws under the scope of supplierand each camera should do printed ferrule label (As per the standards and customer requirements)

Fixing of 43"Monitor on Wall/Panel/TV wall

Laying of ISI Marked PWD approved make 25 mm pvc conduit (ivory) through false celing Pulling of multiple cables( cat 6 cable& OFC etc) as required by the site condition through the pvc , Neat dressing and termination of these cables & restore the celing in orginal condition using PWD Standard- accessories like legs,glands,screws etc,All accessories under the scope of supplier in all locations( as per the standards and site requirements as PWD electrical standards.)

Laying of ISI Marked PWD approved make 25 mm pvc conduit (ivory) through wall/floor & Pulling of multiple cables( cat 6 cable& OFC etc) as required by the site condition through the pvc , Neat dressing and termination of these cables using PWD Standard- Corrosion free accessories like legs,glands,screws etc,All accessories under the scope of supplier in all locations( as per the standards and site requirements as PWD electrical standards.)

Laying of ISI Marked PWD approved make 20 mm pvc conduit (ivory) through false celing Pulling of multiple cables( cat 6 cable& OFC etc) as required by the site condition through the pvc , Neat dressing and termination of these cables & restore the celing in orginal condition using PWD Standard- accessories like legs,glands,screws etc,All accessories under the scope of supplier in all locations( as per the standards and site requirements as PWD electrical standards.)

Laying of ISI Marked PWD approved make 20 mm pvc conduit (ivory) through wall/celing/floor & Pulling of multiple cables( cat 6 cable& OFC etc) as required by the site condition through the pvc , Neat dressing and termination of these cables using PWD Standard- accessories like legs,glands,screws etc,All accessories under the scope of supplier in all locations( as per the standards and site requirements as PWD electrical standards.)

Laying of ISI Marked 32mm/40mm HDPE pipe through wall/underground & Pulling of multiple cables( cat 6 cable& OFC etc) as required by the site condition through the HDPE , Neat dressing and termination of these cables using PWD Standard- accessories like legs,glands,screws etc,All accessories under the scope of supplier in all locations( as per the standards and site requirements as PWD electrical standards.)

Laying of ISI Marked 100mmX50mm PVC cable trunk through wall & Pulling of multiple cables(cat 6 cable& OFC etc) as required by the site condition through the PVC , Neat dressing and termination of these cables using PWD Standard- accessories like legs,glands,screws etc,All accessories like connector,endcap,inner angle,outer angle etc, to be hanged from top with treaded hanger bolts with necessary fastners with bottom support on trunking in a spacing of one meter under the scope of supplier (as per the standards and site requirements as PWD electrical standards.)

Excavation of trench of size 40X100cm,sand cushioning up to a height of 25 cm (80+170mm),providing protective covering with country burnt bricks laid breadth wise,refilling the trench etc. as required(in hard soil) with indication of path of fiber.

Fixing and neat installation of 42U Equipment Rack (Using PWD Standard- accessories under the scope of supplier as per the standards and site requirements.)

Fixing and neat installation of 6U Outdoor Rack wall mount/pole mount Rack (Using PWD Standard- accessories under the scope of supplier as per the standards and site requirements.)

Fixing and neat installation of 6U wall mount/pole mount Rack (Using PWD Standard- accessories under the scope of supplier as per the standards and site requirements.)

Neat installation of 1KVA online Ups with 30 min. mor hour battery backup (using PWD Standard- accessories like legs,glands,screws etc under the scope of supplieras and site requirements as PWD electrical standards.)

Neat installation of 10 KVA Ups (using PWD Standard- accessories like legs,glands,screws etc under the scope of supplieras and site requirements as PWD electrical standards.)

Neat installation of 2 nos of 20 KVA Ups in redundant mode (using PWD Standard- accessories like legs,glands,screws etc under the scope of supplieras and site requirements as PWD electrical standards.)

Fixing of 6 mtr GI Pole with 80mm base diameter fixed in a concrete footing of minimum height 75 cm properly finished with painting (primer wih 2 coat paint) with camera mounting options. As per the PWD standards and site requirements)

Setting of CCTV control Room including Supply, Installation,Testing and commissioning of Customized Console desk (H X W X L - 750 mm 600 mm X 3000 mm) Desk with provision of placing 6 nos. of Monitors (32 inch) on Monitor Mount,3 nos of keyboard/mouse/sliding Trays/chairs.Extruded AL profile structure with MS (2 mm) Top and Bottom frame. laminated 26mm(+ 1mm) MDF board side panels (Fixed side panel)and laminated 18 mm (-1 mm)MDF Board frond and rear modesty (openable front and rear modesty with push Locks).Table Top in 12 mm solid Acrylic panel on 26 mm (+-1 mm) MDF Board and Monitor Base in Laminated 18 mm (=1 mm) MDF Board. both Horz and vertical managers for routing lan and power cables, power Distribution sockets within the Desk. and 3 nos of high back chairs & Videowall setup

Neat installation of Duplex SC/UPC-LC/UPC patch chord 1 mtr

Neat installation of SITC of 6 Port fully loaded 1 U Rack Mountable LIU with Splicing tray ,pigtails and cable management

Neat installation of SITC of 24 Port fully loaded 1 U Rack Mountable LIU with Splicing tray ,pigtails and cable management

Neat installation of SITC of 10 G Base LX Single mode SFP module compatible with switches

Neat laying and termination of 23AWG Cat-6, 8 port patch panel

Neat laying and termination of 23AWG Cat-6, 24 port patch panel

Neat installation of Enterprise class PoE + Access Switch with minimum 8 x 100/1G base- T ports and 2 x 1/10G SFP+ ports

Neat installation of Enterprise class PoE + Access Switch with minimum 24 x 100/1G base- T ports and 2 x 1/10G SFP+ ports

Neat installation of Enterprise class Core Switch with Inernal Redundant Power Supplies

Neat installation of SITC of Commercial Grade of 32" Full HD Narrow bezel LED Display suitable for 24 x 7 opertion ,500nits Brightness,2 HDMI ports 1-RJ45 PORT,1 usb PORT WITH WALL Mount bracket and all accessories

Neat installation of PTZ Digital Joystick controller

Neat installation of Client Workstation

Neat installation of Redundant Recording Server/NVR Supports 128 camera Recording with required licesnses for enabling the redundancy

Neat installation of camera Recording Server/NVR Supports 128 camera Recording

Neat installation of central Video/Database management Server

Neat installation of Video management Server

Splicing

Installation of 1 M Cat 6 factory crimped Patch chord

Crimping of RJ 45 Jack at camera end

BHAGAVATHI ASSOCIATES