Supply, Installation, Testing & Commissioning of 1.5 Ton Goods Lift and related items at Pathypustak Mandal, G.I.D.C, Sector-25, Gandhinagar. Dist:- Gandhinagar ( Including Civil work) (Second Attempt)

NAME OF WORK :- Supply, Installation, Testing & Commissioning of 1.5 Ton Goods Lift and related items at PathyPustak Mandal, G.I.D.C., Sector-

25, Gandhinagar. Dist – Gandhinagar (Including Civil work) (Beneficiary’s Director.Priority N.R.B.2025-26)

STATEMENT SHOWING AT APROXIMATE A QUANTITY FOR THE ITEM OF ABOVE WORK TO BE CARRIED OUT AND APPROXIMATE COST PUT TO THE TENDER FOR

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

1 Excavation for foundation in loose or soft soil upto 1.5 m. depth including sorting out and 131.20 CMT 121.91 Rs. One hundred twentyone & paise ninety

stacking of useful materials and disposing of the excavated stuff upto any Lead and lift. one only

2 Excavation for foundation in loose or soft soil 1.5 m. to 3.0 m depth including sorting out and 81.50 CMT 134.95 Rs. One hundred thirty four and paise ninety

stacking of useful materials and disposing of the excavated stuff upto any Lead and lift. five only

3 Providing and filling rubbles including hand packing and filling interstices with quarry spalls 20.30 CMT 1836.84 Rs. One thousand eight hundred thirty six

behind abutments and between ruturns as directed and paise eighty four only

4 Filling avaliable excavate earth ( excluding rock). In trenches, plinth sides of foundations etc. in 126.50 CMT 135.56 Rs. One hundred thirty five and paise fifty

layers NOt exceeding 20 cms. In depth consolidation each deposited layer by ramming and six only

5 Providing and laying Cement concrete 1:3:6(1cement:3coarse sand :6 Machine crush stone 11.20 CMT 3054.35 Rs. Three thousand fifty four and paise thirty

aggregate 40mm nominal size) and curing etc complete excluding cost of form work in (A) five only

Foudation and plinth

6 Providing & laying controlled cement concrete M 250 including finishing smooth with curing 43.00 CMT 4674.84 Rs. Four thousand six hundred seventy four

complete including cost of formwork but excluding the cost of reinforcement in Foundation and paise eighty four only

Footing and mass concreteRates Are Inclusive Of Providing & Mixing Plastisizer Of Approved

Make & In Proportion As Prescribed By The Manufacturer.

7 Providing & laying controlled cement concrete M 250 including finishing smooth with curing 3.90 CMT 8932.05 Rs. Eight thousand nine hundred thirty two

complete including cost of plywood formworks only for fair finish and steel propping only so as to and paise five only

give fair finish but excluding the cost of reinforcement in COLUMN UPTO PLINTH.For any

cross sectional area of column.Rates Are Inclusive Of Providing & Mixing Plastisizer Of

Approved Make & In Proportion As per mix design

8 Providing & laying controlled cement concrete M 250 including finishing smooth with curing 45.50 CMT 9881.71 Rs. Nine thousand eight hundred eighty one

complete including cost of formworks only for fair finish and steel propping only so as to give fair and paise seventy one only

finish but excluding the cost of reinforcement in RCC WALL for ground floor.Rates Are Inclusive

Of Providing & Mixing Plastisizer Of Approved Make & In Proportion As per mix design- Up to

9 Providing & laying controlled cement concrete M 250 including finishing smooth with curing 9.50 CMT 9922.42 Rs. Nine thousand nine hundred twenty two

complete including cost of formworks only for fair finish and steel propping only so as to give fair and paise fourty two only

finish but excluding the cost of reinforcement in RCC WALL for First floor.Rates Are Inclusive

Of Providing & Mixing Plastisizer Of Approved Make & In Proportion As per mix design :First

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

10 Providing & laying controlled cement concrete M 250 including finishing smooth with curing 10.00 CMT 9963.13 Rs.nine thousand nine hundred sixty three

complete including cost of formworks only for fair finish and steel propping only so as to give fair and paise thirteen Only

finish but excluding the cost of reinforcement IN RCC WALL for Second floor.Rates Are

Inclusive Of Providing & Mixing Plastisizer Of Approved Make & In Proportion As per mix

design:Second floor

11 Providing & laying controlled cement concrete M 250 including finishing smooth with curing 9.00 CMT 10003.84 Rs. Ten thousand three and paise eighty

complete including cost of formworks only for fair finish and steel propping only so as to give fair four Only

finish but excluding the cost of reinforcement in RCC WALL for Third floor.Rates Are Inclusive

Of Providing & Mixing Plastisizer Of Approved Make & In Proportion As per mix design : Third

12 Providing & laying controlled cement concrete M 250 including finishing smooth with curing 1.00 CMT 7257.99 Rs. Seven thousand two hundred fifty seven

complete including cost of plywood formworks only for fair finish and steel propping only so as to and paise ninety nine Only

give fair finish but excluding the cost of reinforcement in PLINTH BEAMS for any cross

sectional area of beam.Rates Are Inclusive Of Providing & Mixing Plastisizer Of Approved Make

& In Proportion As per mix design

13 Providing & laying controlled cement concrete M-250 & including finshing smooth with curing 1.00 CMT 7735.87 Rs. Seve thousand seven hundred thirty five

etc. complete including the cost of form work but excluding the cost of reinforcement for RCC and paise eighty seven Only

work for SLAB for thickness 13 to 15 cms... etc. The rates are also inclusive of providing and

mixing plastisizer of approved make in proportion priscribed by manufacturer. Ground floor

14 Providing & laying controlled cement concrete M-250 & including finshing smooth with curing 1.00 CMT 7776.58 Rs.seven thousand seven hundred seventy

etc. complete including the cost of form work but excluding the cost of reinforcement for RCC six and paise fifty eight Only

work for SLAB for thickness 13 to 15 cms... etc. The rates are also inclusive of providing and

mixing plastisizer of approved make in proportion priscribed by manufacturer. First floor

15 Providing & laying controlled cement concrete M-250 & including finshing smooth with curing 1.00 CMT 7817.29 Rs. Seven thousand eight hundred

etc. complete including the cost of form work but excluding the cost of reinforcement for RCC seventeen and paise twenty nine only

work for SLAB for thickness 13 to 15 cms... etc. The rates are also inclusive of providing and

mixing plastisizer of approved make in proportion priscribed by manufacturer. Second floor

16 Providing & laying controlled cement concrete M-250 & including finshing smooth with curing 1.80 CMT 7858.00 Rs.seven thousand eight hundred fifty eight

etc. complete including the cost of form work but excluding the cost of reinforcement for RCC only

work for SLAB for thickness 13 to 15 cms... etc. The rates are also inclusive of providing and

mixing plastisizer of approved make in proportion priscribed by manufacturer. Third floor

17 Providing and Laying controlled cement concrete M-250 and including finishing smooth with 0.50 CMT 9045.03 Rs. Nine thousand fourty five and paise

curing etc.complete. Including the cost of formwork but excluding the cost of reinforcement for three only

R.C.C work in beam having any cross section area of BEAM.Rate are also inclusive of

Providing and mixing Plasticizer of approved make in proportion prescribed by Manufacturer.

Ground Floor Formwork Shall be used with plywood shuttering & Steel props.

18 Providing and Laying controlled cement concrete M-250 and including finishing smooth with 0.50 CMT 9085.74 Rs.nine thousand eighty five and paise

curing etc.complete. Including the cost of formwork but excluding the cost of reinforcement for seventy four only

R.C.C work in beam having any cross section area of BEAM.Rate are also inclusive of

Providing and mixing Plasticizer of approved make in proportion prescribed by Manufacturer.

First Floor Ground Floor Formwork Shall be used with plywood shuttering & Steel props.

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

19 Providing and Laying controlled cement concrete M-250 and including finishing smooth with 0.50 CMT 9126.45 Rs.nine thousand one hundred twenty six

curing etc.complete. Including the cost of formwork but excluding the cost of reinforcement for and paise fourty five only

R.C.C work in beam having any cross section area of BEAM.Rate are also inclusive of

Providing and mixing Plasticizer of approved make in proportion prescribed by Manufacturer.

Second Floor Ground Floor Formwork Shall be used with plywood shuttering & Steel

20 Providing and Laying controlled cement concrete M-250 and including finishing smooth with 0.50 CMT 9167.16 Rs.nine thousand one hundred sixty seven

curing etc.complete. Including the cost of formwork but excluding the cost of reinforcement for and paise sixteen only

R.C.C work in beam having any cross section area of BEAM.Rate are also inclusive of

Providing and mixing Plasticizer of approved make in proportion prescribed by Manufacturer.

Third Floor Ground Floor Formwork Shall be used with plywood shuttering & Steel

21 Providing T.M.T. Fe-500 Steel reinforcement for RCC work including cutting, bending, binding 27100.00 kg 78.34 Rs. Seventy eight and paise thirty four only

and placing in position etc. complete for all floors.Brand as approved by GSPHC.

22 BRICK WORK using common burnt clay building bricks having crushing strength not less than 2.00 CMT 4458.23 Rs. Four thousand four hundred fifty eight

35 Kg./Sq cm. In super structure above plinth level. Conventional bricks shall be used only in and paise twenty three only

cement moratar 1 : 6 ( 1 cement : 6 coarse sand) for GROUND FLOOR

23 BRICK WORK using common burnt clay building bricks having crushing strength not less than 0.50 CMT 4499.93 Rs. Four thousand four hundred ninety nine

35 Kg./Sq cm. In super structure above plinth level. Conventional bricks shall be used only in and paise ninety three only

cement moratar 1 : 6 ( 1 cement : 6 coarse sand) for FIRST FLOOR

24 BRICK WORK using common burnt clay building bricks having crushing strength not less than 0.50 CMT 4541.63 Rs. Four thousand five hundred fourty one

35 Kg./Sq cm. In super structure above plinth level. Conventional bricks shall be used only in and paise sixty three only

cement moratar 1 : 6 ( 1 cement : 6 coarse sand) for SECOND FLOOR

25 Brick work using common burnt clay building bricks having crushing strength not less than 35 1.00 CMT 4583.33 Rs. Four thousand five hundred eighty three

Kg/Sq.cm.in superstructure above plinth up to floor two level in conventional bricks in cement and paise thirty three only

mortar 1:6(1-cement;6-fine sand) for Third Floor.

26 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering and 3.50 SMT 209.88 Rs. Two hundred nine and paise eighty eight

finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a floating coat only

of neat cement slurry at GROUND FLOOR.

27 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering and 3.50 SMT 236.99 Rs. Two hundred thirty six and paise ninty

finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a floating coat nine only

of neat cement slurry at FIRST FLOOR.

28 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering and 3.50 SMT 264.10 Rs. Two hundred sixty four and paise ten

finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a floating coat only

of neat cement slurry at SECOND FLOOR.

29 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering and 6.60 SMT 291.21 Rs. Two hundred ninety one and paise

finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a floating coat twenty one only

of neat cement slurry at THIRD FLOOR.

30 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for interior 190.50 SMT 213.51 Rs. Two hundred thirteen and paise fifty one

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing only

with floating coat of neat cement slurry at GROUND FLOOR.

31 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for interior 13.50 SMT 242.77 Rs. Two hundred fourty two and paise

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing seventy seven only

with floating coat of neat cement slurry at FIRST FLOOR.

32 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for interior 12.50 SMT 272.03 Rs. Two hundred seventy two and paise

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing three only

with floating coat of neat cement slurry at SECOND FLOOR.

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

33 Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground level 163.00 SMT 312.56 Rs. Three hundred twelve and paise fifty six

consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thock finishing only

coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height.

34 Providing CEMENT VATA ( 10cm x 10cm )size quarter round in cement mortar 1 : 1 including 10.50 rmt 24.04 Rs. Twenty four and paise four only

neat cement finishing, watering etc. Complete.

35 Providing & Laying integrated cement based proprietary water proofing treatment of required 9.00 SMT 912.58 Rs. Nine hundred twelve and paise fifty eight

thickness over the roof including 10mm thick cement mortar 1:3 and CHINA MOSAIC fitting and only

finally finishing the surface with white cement slurry and sloping out terrace slabs with

Following specification laid to required slope not flatter than 1:80 ( the thickness of water

proofing treatment near rainwater outlet or the lowest point of the finished slope shell not to be

less than 45 mm. Including treating the vertical surface of the parapet wall up to 20 cm. height

above finished level of terracing including finishing top with joint less water proofing plaster

curing testing etc, completed. Rate is Including 10 years performance of guarantee bond to be

given on stamp paper ( no extra shall be paid for increase in thickness for proper slope ).

(A) Applying & grounting a slurry coat of neat cement using 2.75 kg/smt. of cement admixed

with proprietary water proofing compound confirming to IS 2645 and 10mm. Thick water

proofing cement plaster in cement mortar in 1:3.over the RCC slab including cleaning the

surface before treatments.

(B) Laying cement concrete using broken brick bat using 25 mm to 40 mm size with 50% of

cement mortar 1:4 ( 1 cement : 4 corse sand )over 10mm. thick water proofing cement plaster

in cement mortar in 1:3 admixed with proprietary water proofing compound conforming to IS

2645 required slope and treating similarly the adjoining walls up to 200 mm height including

rounding of junction of walls.

(C) After two days of proper curing applying a second coat of cement slurry .

(D) Finishing the surface with china mosaic peices laid on 10 mm thick joint less cement mortar

of mix 1:3 ( 1 cement : 3 sand) admixed with proprietary water proofing compound confirming to

IS 2645 and finally finishing the surface with trowel with neat cement slurry .

(E) The whole terrace so finished shall be flooded with water for a minimum period of two weeks

for curing for final test. All above operation to be done in order and as directed and specified by

the engineer in charge.

36 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop Surface (two 17.50 SMT 193.29 Rs. One hundred ninety three and paise

coats) to give an required shap even shade after throughly brushing the surface to remove all twenty nine Only

dirt and remains of loose poweder material etc. complete. Rate are inclusive of applying two

coat of lapy (Putty) and one coat of primer on new Ceilling/Slop Surface to give and even shade

including thoroughly brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth. Fine Putty Shall be Bison Wall Putty of Berger Paint India Ltd or

Trucare Wall Putty of Asian Paint or Dulux Polly Putty of Dulux Paint Only & Primer shall be BP

White Primer of Berger Paint India Ltd or Asian Paint Trucare Interior Primer of Asian Paint or

Interior Sealer A 500 of Dulux Paint only and Plastic Emulsion paint Shall be Rangoli Total Care

of Berger Paint India Ltd or Apcolite Premium Emulsion of Asian Paint or Dulux Interior A 900 of

Dulux Paint only.

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

37 :- Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an required 180.00 SMT 180.25 Rs. One hundred eighty and paise twenty

shap even shade after throughly brushing the surface to remove all dirt and remains of loose five Only

poweder material etc. complete. Rate are inclusive of applying two coat of lapy (Putty) and one

coat of primer on new wall surface to give and even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand papered smooth. Fine

Putty Shall be Bison Wall Putty of Berger Paint India Ltd or Trucare Wall Putty of Asian Paint

or Dulux Polly Putty of Dulux Paint Only & Primer shall be BP White Primer of Berger Paint

India Ltd or Asian Paint Trucare Interior Primer of Asian Paint or Interior Sealer A 500 of Dulux

Paint only and Plastic Emulsion paint Shall be Rangoli Total Care of Berger Paint India Ltd or

Apcolite Premium Emulsion of Asian Paint or Dulux Interior A 900 of Dulux Paint only.

38 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) over 155.00 SMT 153.35 Rs. One hundred fifty three and paise thirty

and above applying One Coat Of Primer to give an required shape even shade after thoroughly five Only

brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete.

Primer Shall be Weather Coat Exterior Primer of Berger Paint India Ltd or Asian Paint Trucare

Exterior Primer of Asian Paint Or Exterior Sealer E 900 of Dulux Paint only and exterior

emulsion paint Shall be Weather Coat Smooth of Berger Paint India Ltd or Apex Weather Proof

Emulsion of Asian Paint or Dulux Weather Shield Projecs of Dulux Paint Only

39 Finishing wall with white wash on wall surface (three coats) to give an even shade after 167.00 SMT 18.85 Rs. Eighteen and paise eighty five Only

thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc

40 Providing and Laying 25mm thick Mirror Polished (Dimond Cut) Kota Stone Slab Flooring over 20mm thick base of cement 45.50 SMT 1108.30 Rs. One thousand one hundred eight and

mortar 1 : 6 (1-Cement : 6-Coarse Sand) laid over and jointed with grey cement slurry including Rubbing and Polishing etc.

Complete as Directed By Engineer In Charge for all Floors.

paise thirty only

41 Providing and Fixing Granite of Telephonic Black Colour 18mm thick for jambs and sills of doors 27.10 SMT 2428.00 Rs. Two thousand four hundred twenty eight

& windows using neat cement slurry laid over 20 mm average base of cement mortar 1:1 (1 only

cement:1 Coarse Sand) and jointed with grey cement slurry including racking (Tancha Work)

rubbing and polishing, scaffoldings, tools and tackles, scaffolding etc. complete. (with base of

neat cement) as per direction of Engineer in charge including rounding the exposed edges as

directed etc. Complete for ALL FLOORS.

42 Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern fabricated from M.S. 1510.00 KG 75.11 Rs. Seventy five and paise elevan Only

flat,square bars, round bars,c-channel, box pipe as per detail Drawings. Rate is inclusive of

welding with grinding smooth surface, two coats of Oil paint and one coat of yellow Zinc primer

coat. Oil paint shall be as per approved brand list of GSPHCL The structural steel shall be used

43 FIX GLASS WINDOW Providing and fixing standard extruded of alluminium section of size 26.00 SMT 1509.90 Rs. One thousand five hundred nine and

95.00 * 24.00 * 1.95 mm ( of Jindal section no:4605, @ Wt 1.094 Kg/RMT with colour anodized paise ninety Only

alluminium frame with 5 mm thick transparent bronze colour tinted float glass as details etc

complete for fix window

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

44 Providing and fixing Alluminium Section Window having extruded Aluminum Colour anodized 10.00 SMT 1902.50 Rs. One thousand nine hundred two and

section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of paise fifty Only

0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal

Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of

Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of

size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame as per details including One Mosquitoe Jalli

Shutter With Both Side Locking Arrangment.

45 Rebaring of 12 mm dia steel bars up to depth suggested by structural consultant or min. 150 40.00 NO 120.00 Rs. One hundred twenty only

mm, with HILTI chemical grouting at all floors for all size bars as per the instruction of EIC.

46 Rebaring of 16 mm dia steel bars up to depth suggested by structural consultant or min. 150 121.00 NO 161.00 Rs. One hundred sixty one Only

mm, with HILTI chemical grouting at all floors for all size bars as per the instruction of EIC.

47 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats 6.00 NO 195.14 Rs. One hundred ninety five and paise

architraves, holdfasts and other attachment etc. complete and stacking them within all lead and fourteen Only

lift.(i) Not exceeding 3 Sq.M. in area.

48 Demolition including stacking of serviceable materilas and disposal of unserviceable materials 15.90 CMT 1099.75 Rs. One thousand ninety nine and paise

with all lead and lift. (i) R.C.C. Work seventy five Only

49 Demolition of brick work & stone masonary incl. stacking of servicable material & disposal of 11.00 CMT 572.20 Rs. Five hundred seventy two and paise

unservicable material (iii)In cement mortar with all lead and lift. twenty only

50 Steel Work welded in built up sections framed work including cutting, housting,fixing in position 337.50 KL 8750.00 Rs. Eight thousand seven hundred fifty Only

and applying priming coat of redlead paint [ A ] In beam and joints channels angles tees flats

with connecting plate or angle cleates as in main and crossed beam hip and jacke after, purlins

connected to common rafter and the like.

51 Applying priming coat over new steel and other metal surface after over and including preparing 765.00 SMT 127.35 Rs. One hundred twenty seven and paise

the surface by throughly cleaning oil, grease dirt and other foreign matter and scoured with thirty five only

brushes fine steel wool, scrapers and sand paper with ready mixed priming paint brushing red

lead AND Painting two coatsover it with enamel paint brushing, interior to give an even shade

including cleaning the surface of all dift, dust and other foreign matter.

52 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and 87.00 SMT 49.61 Rs. Fourty nine and paise sixty one Only

disposal of serviceable materials with all lead and lift

53 Demolition incl. stacking of serviceable materials & disposal of unserviceable material with all 9.00 CMT 633.39 Rs. Six hundred thirty three and paise thirty

lead & lift (i)Unreinforcement work nine Only

54 Design, Supply and fixing of FR Grade alluminium composit panels with necessary framing 678.00 SMT 5060.00 Rs. Five thousand sixty Only

material for covering of structural lift shaft with specializedmanpower for working at height on

open structure (G+3 FLOORS). ACP sheet thickness 3mm. with ms frames of 35 x 25 MS Pipe

with two coat primer as directed by Engineer - in - charge properly screwed over necessory

structural framing. ACP should be properly fixed and screwed with the frame and all joints to be

filled and finished with silicone in pattern suggested by the architect with tray system. Colours

also should matalic or any colour be selected as per architects instructions. rate includs acp, ms

frame, fixtures, fittings, scafolding, etc. complete and work to be done as per the instructions of

TOTAL CIVIL COST(A)

ELECTRICAL WORK

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

55 Designing, Supplying, Erecting, Testing and Commissioning of 1500 Kg Capacity Goods ( 3.00 Per Job 2275537.00 RS: Twenty Two lac Seventy Five

Ground+ 03 upper Floor) Machine Room Less ( MRL) lift ( in fabricated structure M.S. lift well Thousand Five Hundred Thirty Seven

developed by lift Agency) having following main features:[1] GEAR LESS LIFT DRIVE comprising only

of High Starting torque Lift duty 3 phase 440 V A. C. Permanent magnetic synchronous motor of

proper rating with high efficiency shall be used. [2] Micro processor based / PLC, ACVVF, vector

control drive with encoder feedback closed loop system shall be used for lift car and door

operation which shall be full collective selective operation hall call demand response,

UP/DOWN hall stops, Main, Up/ Down Contactor with overload and phase reversal relay and

safety controls. [3] Car with fabricated platform having 3mm or more thick MS heavy duty

plate with support at 200mm spacing with bracings of adequate size and to sustain the impact

load cabin + Goods with safety factor of fire for steel and side panels of Stainless steel of sheet

of grade 304 duty & 1.5mm thick sheet & Trolly Guard with suitable height at car. . Car

ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car flooring shall

be 3.00 mm heavy duty MS Chequre Plate having adequate thickness & strength to

withstand load & impact of M.S. loading trolly and books Flooring , Car doors & Landing

Door shall be of stainless steel grade 304 & 1.5mm thick sheet , hairline finish with centre

opening / telescopic automatic doors. Guiding Sill made from MS Solid flat bar with groove &

ISMC 100X50mm for sill support at every landing . Car panel will also be S.S. 304 finished &

1.5mm thick sheet with emergency stop device, mechanical door safety device, facility of auto/

attended mode. All car panel buttons and all floor switches must be with brail language as per

lift act. Minimum Car Area Inside:- 1600mm WideX2350mm Deep(3.68 Sq. Meter) & Clear

Door Opening:-1400mm or as per site requirement Wide X2000mm Height

[4] All landing doors must be fire rated for 2 hours necessary test certificate shall be

fully automatic centre opening/ telescopic opening made of hairline finish steel grade of

304 & 1.5mm thick sheet with key holes and infrared curtains with Unlocking facility

from outside [5] Appropriate battery operated emergency light in the car along with

alarm switch shall be provided also ememergency light and fan should start

immediately without any time delay as soo as power fail.[6] Digital scrolling indicator

system for up down arrow along with floor position indicator shall be provided inside the

car and at all floors.[7] Full height infra red curtain with multiple cross / crossing light

beams shall be provided.

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

[8] Automatic Rescue Device (ARD)(seprate UPS) shall be provided accordingly of

Goods capacity with manual rescue operation(manual cranking facility. [9] Audio visual

indication in the lift car showing over loading shall be provided such that doors kept

open till excess load is removed.[10] Spring buffers/PU Buffers shall be provided..[11]

Car rotor motor Fan with automatic sleep timer shall be provided.[12] Voice

annunciate with suitable music shall be provided in lift car.[13] Self diagnostics system

for operational and safety parameters shall be provided in control panel .[14]

Mechanical over speed governor with governor calibration as per actual site perameter

and submission of calibration certificate submission door key holes in the floor doors,

fireman switch shall be provided. [15] Lift machine hoisting arrangement in the lift

machine room and monkey ladder for lift pit should be provided by the lift agency, along

with the other steel structure works, foundations for the machine etc…[16] In the hoist

way fascia plate shall be provided without any extra cost, where ever required as / if

directed by engineer in charge

.[17] Permanent wiring in lift machine room and lift well with proper numbers of light

points, with fixtures, exhaust fan and plug points shall be provided by the agency.

Power supply of 3 phase 440 V shall be made available by department in lift machine

room .[18] Any civil/ electrical works for additional and alteration in lift shaft and

machine room related to erection of lift shall be made by lift agency without any extra

cost.[19] Agency Has To Provide All Working Drawing and Document and Liaison

Service For Obtainning All Necessary Permission From Lift Inspector and Other

Authorities. Agency Has To Provide All Working Drawing and Document and Liaison

Service For Obtainning All Necessary Permission From Lift Inspector and Other

Authorities, The legal and other charges to get erection permission and Final Licence

also will be borne by contractor [20] acrylic transparent licence/display A4 size holder in

[20a]As Per Statutory Requirement Of Govt Of Gujarat Lift and Escalator Act 2000,Lift

Agency has To Provide.1.Car Top Safety Barier 2.Push and Talk Communication

system 3.Fireman s Switch Operation at Ground Floor 4.carrying out third party lift

inspection during/after lift erection and provide report by third party authorized by

concern licensing authority 5.agency has to provide third party insurance upto

completion of free maintenance period and submit the document for the same. [21] Car

Panel Operating Buttons with floor position indicator/buttons must be of Auto Glow type

clearly visible when view from inside cabin. (22 ) Required Capacity of Three Phase

Voltage Stabilizer as per Lift OEM Requirement Having Input voltage Range 340 to

480 Volt AC and Output Voltage Range 415 Volt AC + 1% ( line Line ). Voltage

stabilizer must be installed at Machine Room/ Electrical room .

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

(23) Advanced Control system dual 32 bit embedded microprocessor with CANBUS

serial communication mode operation on site programming facility , anti nuisance, pre

opening, BMS/ RMS system supporting hardware and Software. False call Canceling/

Anti Nuisance, [24] Intercom Suitable For Hook Up To EPBAX (25) As per gujarat lift

and escalator act 2001 and central electricity authority regulations 2010, RCCB for lift

cabin and lift machine must be installed in control panel by lift manufacturer(26) In this

tender , Agency has to maintain all lift including Service and Spare Parts during Defect

Liability period as per item included in tender. one year free service and Maintenance

shall be provided by OEM. Details specification of lift as per Annexure A (a) For

Kg Goods MRL Type Ground + 3 upper Floor ) with Rated Speed of 1.0 m/sec

with micro processor /PLC control and ACVVVF.drive

Designing, Supplying, Erecting, Testing and Commissioning of 1500 Kg Capacity Goods ( 1.00 Per Job 2110275.00 RS: Twenty One lac Ten Thousand

Ground+ 02 upper Floor) Machine Room Less ( MRL) lift ( in RCC shaft) having following main Two Hundred Seventy Five only

features:[1] GEAR LESS LIFT DRIVE comprising of High Starting torque Lift duty 3 phase 440 V A.

C. Permanent magnetic synchronous motor of proper rating with high efficiency shall be used.

[2] Micro processor based / PLC, ACVVF, vector control drive with encoder feedback closed loop

system shall be used for lift car and door operation which shall be full collective selective

operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down Contactor with

overload and phase reversal relay and safety controls. [3] Car with fabricated platform

having 3mm or more thick MS heavy duty plate with support at 200mm spacing with bracings

of adequate size and to sustain the impact load cabin + Goods with safety factor of fire for steel

and side panels of Stainless steel of sheet of grade 304 duty & 1.5mm thick sheet & Trolly

Guard with suitable height at car. . Car ceiling will be S.S. finishes with aesthetic appearance

56 with LED ceiling lights. Car flooring shall be 3.00 mm heavy duty MS Chequre Plate having

adequate thickness & strength to withstand load & impact of M.S. loading trolly and books

Flooring , Car doors & Landing Door shall be of stainless steel grade 304 & 1.5mm thick

sheet , hairline finish with centre opening / telescopic automatic doors. Guiding Sill made from

MS Solid flat bar with groove & ISMC 100X50mm for sill support at every landing . Car

panel will also be S.S. 304 finished & 1.5mm thick sheet with emergency stop device,

mechanical door safety device, facility of auto/ attended mode. All car panel buttons and all

floor switches must be with brail language as per lift act. Minimum Car Area Inside:- 1600mm

WideX2350mm Deep(3.68 Sq. Meter) & Clear Door Opening:-1400mm or as per site

requirement Wide X2000mm Height

[4] All landing doors must be fire rated for 2 hours necessary test certificate shall be

fully automatic centre opening/ telescopic opening made of hairline finish steel grade of

304 & 1.5mm thick sheet with key holes and infrared curtains with Unlocking facility

from outside [5] Appropriate battery operated emergency light in the car along with

alarm switch shall be provided also memergency light and fan should start immediately

without any time delay as soo as power fail.[6] Digital scrolling indicator system for up

down arrow along with floor position indicator shall be provided inside the car and at all

floors.[7] Full height infra red curtain with multiple cross / crossing light beams shall be

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

[8] Automatic Rescue Device (ARD)(seprate UPS) shall be provided accordingly of

Goods capacity with manual rescue operation(manual cranking facility. [9] Audio visual

indication in the lift car showing over loading shall be provided such that doors kept

open till excess load is removed.[10] Spring buffers/PU Buffers shall be provided..[11]

Car rotor motor Fan with automatic sleep timer shall be provided.[12] Voice

annunciate with suitable music shall be provided in lift car.[13] Self diagnostics system

for operational and safety parameters shall be provided in control panel .[14]

Mechanical over speed governor with governor calibration as per actual site perameter

and submission of calibration certificate submission door key holes in the floor doors,

fireman switch shall be provided. [15] Lift machine hoisting arrangement in the lift

machine room and monkey ladder for lift pit should be provided by the lift agency, along

with the other steel structure works, foundations for the machine etc…[16] In the hoist

way fascia plate shall be provided without any extra cost, where ever required as / if

directed by engineer in charge

.[17] Permanent wiring in lift machine room and lift well with proper numbers of light

points, with fixtures, exhaust fan and plug points shall be provided by the agency.

Power supply of 3 phase 440 V shall be made available by department in lift machine

room .[18] Any civil/ electrical works for additional and alteration in lift shaft and

machine room related to erection of lift shall be made by lift agency without any extra

cost [19] Agency Has To Provide All Working Drawing and Document and Liaison

Service For Obtainning All Necessary Permission From Lift Inspector and Other

Authorities. Agency Has To Provide All Working Drawing and Document and Liaison

Service For Obtainning All Necessary Permission From Lift Inspector and Other

Authorities, The legal and other charges to get erection permission and Final Licence

also will be borne by contractor [20] acrylic transparent licence/display A4 size holder in

[20a]As Per Statutory Requirement Of Govt Of Gujarat Lift and Escalator Act 2000,Lift

Agency has To Provide.1.Car Top Safety barier 2.Push and Talk Communication

system 3.Fireman s Switch Operation at Ground Floor 4.carrying out third party lift

inspection during/after lift erection and provide report by third party authorized by

concern licensing authority 5.agency has to provide third party insurance upto

completion of free maintenance period and submit the document for the same. [21] Car

Panel Operating Buttons with floor position indicator/buttons must be of Auto Glow type

clearly visible when view from inside cabin. (22 ) Required Capacity of Three Phase

Voltage Stabilizer as per Lift OEM Requirement Having Input voltage Range 340 to

480 Volt AC and Output Voltage Range 415 Volt AC + 1% ( line Line ). Voltage

stabilizer must be installed at Machine Room/ Electrical room .

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

(23) Advanced Control system dual 32 bit embedded microprocessor with CANBUS

serial communication mode operation on site programming facility , anti nuisance, pre

opening, BMS/ RMS system supporting hardware and Software. False call Canceling/

Anti Nuisance, [24] Intercom Suitable For Hook Up To EPBAX (25) As per gujarat lift

and escalator act 2001 and central electricity authority regulations 2010, RCCB for lift

cabin and lift machine must be installed in control panel by lift manufacturer(26) In this

tender , Agency has to maintain all lift including Service and Spare Parts during Defect

Liability period as per item included in tender. one year free service and Maintenance

shall be provided by OEM. Details specification of lift as per Annexure A (a) For

Kg Goods MRL Type Ground + 2 upper Floor ) with Rated Speed of 1.0 m/sec

with micro processor /PLC control and ACVVVF.drive

57 Executing coprehensive (All in All) service( Per Month) and maintenance(Including 3.00 Per Job 250309.00 RS: Two lac Fifty Thousand Three

replacement of battery For ARD) with spare parts as per terms and condition of tender Hundred Nine only

lift manufacture for defect liability period.For that main agancy has to give All in All

comprehensive maintenance contract to lift manufacturer and copy of this contract will

be submitted before final bill .Agency has to quote rate accordingly.Agency has to also

provide the fitness certificate from lift manufacturer and submit to GSPHCL.Agency has

to Compulsory submit FDR of approved bank as per clause 2.0 of section -3, of

Rs 7,50,927.00 + GST or quoted amount whichever is higher to GSPHCL.for minimum

maturity period of Five years in favour of GSPHCL. Which will be releard after successful

completion of AMC and at the and of defect liability period. in any case without submitting

FDR final bill submission will not be done.lift OME has to mantain written record of sevice

and maintenance during defect libility daily period and one copy of necessary service report

duly sign by pathypustakmandal dept.and submited redulary to GSPHCL.and No Defect

Certificate from pathypustakmandal department at the time of releasing Security Deposite will

be submitted to EE (Ele.), GSPHCL. Without above Service reports security Deposit of whole

project will not be released. (OEM will have to submit stability and performance certificate

regarding Lift at the time of final SD release). Lift agency has to do maintance as per term and

Condition altarenet in tender for delay in rectifing the fault,penalty will be deduced from agency

S.D. For 1500 Kg Capacity Goods ( Ground+ 03 upper Floor)

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

58 Executing coprehensive (All in All) service( Per Month) and maintenance(Including 1.00 Per Job 232130.00 RS: Two lac Thirty Two Thousand One

replacement of battery For ARD) with spare parts as per terms and condition of tender Hundred Thirty only

lift manufacture for defect liability period.For that main agancy has to give All in All

comprehensive maintenance contract to lift manufacturer and copy of this contract will

be submitted before final bill .Agency has to quote rate accordingly.Agency has to also

provide the fitness certificate from lift manufacturer and submit to GSPHCL.Agency has

to Compulsory submit FDR of approved bank as per clause 2.0 of section -3, of

Rs 2,32,130 + GST or quoted amount whichever is higher to GSPHCL.for minimum maturity

period of Five years in favour of GSPHCL. Which will be releard after successful completion

of AMC and at the and of defect liability period. in any case without submitting FDR final bill

submission will not be done.lift OME has to mantain written record of sevice and

maintenance during defect libility daily period and one copy of necessary service report duly

sign by pathypustakmandal dept.and submited redulary to GSPHCL.and No Defect Certificate

from pathypustakmandal department at the time of releasing Security Deposite will be

submitted to EE (Ele.), GSPHCL. Without above Service reports security Deposit of whole

project will not be released. (OEM will have to submit stability and performance certificate

regarding Lift at the time of final SD release). Lift agency has to do maintance as per term and

Condition altarenet in tender for delay in rectifing the fault,penalty will be deduced from agency

S.D. For 1500 Kg Capacity Goods ( Ground+ 02 upper Floor)

59 Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) 665.00 Mtr. 33.00 RS: Thirty Three only

RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & clamps on / in wall / ceiling along with continuous fish wire

to draw mains with necessary fittings and junction boxes for following dia. (a) 25 mm. dia.

60 Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in 2.00 Each 7025.00 RS: Seven Thousand Twenty Five

soft soil. Suitable for doing pipe-in-pipe technology earthing.Earthing electric rod must be made only

from Corrosion free Hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed

Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand Terminal Size:

70mm X 100mm length, Terminal Should be made from inner pipe for that pipe must be

pressed and gave rectangular shape so its work as a terminal.The hot deep galvanising must

be done after above process.Galvanised thickness must be minimum 75 micron any where. SS

Nut bolt:- 2 no.with washer suitable for 14mm dia. hole must be provided at terminal. total

minimum Weight(approx.) of earth electrodewith inside conductive material minimum should be

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time

Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm

depth and Cover should be heavy duty cast iron with required size of 300 mm X 300 mm X

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to

submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured with

earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage between

neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for one year.

Earthing must be done in the presence of A.E. (GSPHCL)]

61 Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed 730.00 Mtr. 141.00 RS: One Hundred Forty One

copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in only

existing pipe of following size (Specifically for control panel, relays, power switchgears, motor

starters & control wiring) with required size of copper lugs, nuts and bolts if required. (a) one

wire 16.00 sq. mm

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking 1.00 Each 6112.00 RS: Six Thousand One Hundred

capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed Twelve only

thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU

63 Providing and erecting 415 Volt MCB four pole motor & inductive load(c Curve) having 10 KA 5.00 Each 730.00 RS: Seven Hundred Thirty only

Breaking capacity and confirms to IS : 8828 in existing metal box having following capacity. (a)

64 Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA 4.00 Each 709.00 RS: Seven Hundred Nine only

breaking capacity & confirms to IS :8828 in existing box having following capacity (a)63 Amp.

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) 6.00 Each 297.00 RS: Two Hundred Ninty Seven

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity only

(A) 6 to 32 Amp DP

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity 4.00 Each 3010.00 RS: Three Thousand Ten only

of 300 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase

and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature

66 & do not incorporate any electronic component for following Max. rating erected as directed. (i)

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity 4.00 Each 1950.00 RS: One Thousand Nine Hundred

of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single Fifty only

phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do

67 not incorporate any electronic component. for following Max. rating erected as directed (i)

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

Supply & Fixing of company fabricated Sheets steel powder coated enclosure Size 4''X6'' for 7.00 Each 272.00 RS: Two Hundred Seventy Two

incorporating Two nos. MCB.(MCBDB must be erected in line level & level with spirit level and only

finish the external edge with box cutting plaster)( Same color MCB(SP/DP) should be used as

same as MCBDB)( Incl. necessary numbiring /marking on box done with RED colour radium

68 sticker as per site requirement & instruction given by EIC on site. Font/ Number size given by

EIC on site as per requirement)(The enclosure should be used of same company of MCB/

ELCB to be used)

Supply & Fixing of company fabricated Sheets steel powder coated enclosure minimum Size 7.00 Each 442.00 RS: Four Hundred Forty Two

8''X6' for incorporating Four nos. MCB.(The enclosure should be used of same company of only

MCB/ ELCB to be used) (MCBDB must be erected in line level & level with spirit level and finish

the external edge with box cutting plaster)( Same color MCB(SP/DP) should be used as same

as MCBDB)( Incl. necessary numbiring /marking on box done with RED colour radium sticker as

per site requirement & instruction given by EIC on site. Font/ Number size given by EIC on site

as per requirement)

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - 1.00 Each 13688.00 RS: Thirteen Thousand Six Hundred

flush / surface mounted double door (IP54) fitted with insulated copper busbar, isolated neutral Eighty Eight only

link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54 suitable for 63/100

AMP TPN MCCB + RCCB as incomer and three phase outgoing as per following .(The DBs

should be used of same company of MCB to be used) (a)8 way outgoing

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor 400.00 Mtr. 213.00 RS: Two Hundred Thirteen only

for 1.1 KV. to be laid on wall with necessary 1.0mmm cable clamps or in existing trench / pipe

71 of following size of cables (A) 3 core 2.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor 400.00 Mtr. 505.00 RS: Five Hundred Five only

for 1.1 KV. to be laid on wall with necessary 1.0mmm cable clamps or in existing trench / pipe

of following size of cables (A) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium 20.00 Mtr. 189.00 RS: One Hundred Eighty Nine

conductor for 1.1 KV. to be laid on wall with necessary 1.0mmm cable clamps or in existing only

trench / pipe of following size of cables (A) 4 core 25 Sq. mm

Providing & fixing double compressed heavy duty flange type brass cable gland with rubber 23.00 Each 43.00 RS: Forty Three only

ring for P V C insulated armoured cable complete with outgoing tails, insulating tape etc. For

following size cables.(A) 2 to 4 core 2.5 / 4 Sq. mm (Sigma, MCI, Comet Make Only)

For 2 to 4 core x 6.0 Sq. mm (Sigma, MCI, Comet Make Only) 13.00 Each 48.00 RS: Forty Eight only

For 2 to 4 core x 25.0 Sq. mm (Sigma, MCI, Comet Make Only) 4.00 Each 61.00 RS: Sixty One only

ITEM NO Description QUANTITY Unit RATE IN RATE IN WORD Amount

Solderless crimping type Copper lugs conforming to IS suitable for cable of following size 144.00 Each 8.00 RS: Eight only

evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium

75 plated nut bolts in an approved manner. For 2.5/6 Sq.mm Cable ( Make:- Dowells, Comet,

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size 16.00 Each 15.00 RS: Fifteen only

evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium

76 plated nut bolts in an approved manner. For 25 Sq.mm Cable( Make:- Dowells, Comet,

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The 140.00 Mtr. 420.00 RS: Four Hundred Twenty only

cable tray should be single or double bended as per required and as per IS 2062/1079 and shall

be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with

77 coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with

necessary support( included) as per Specification and as per instruction of engineer in

charge..(a) 150 X 50 X 1.6 mm Thick( Make:- Indiana , KEW, Metalem, LABH (Dudhat), )

TOTAL ELECTRICAL COST(B)

TOTAL COST(A+B)

Signature of Contractor DY.Executive Engineer Executive Engineer

Gandhinagar Gandhinagar