Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹37.0 LAccepted-AOC PO PS BANARHAT DIST JALPAIGURI PIN 735202 W B | JALPAIGURI | WEST BENGAL | 735202 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹40.5 L+₹3.5 L (9.40%)Rejected-Finance GARRISON ENGINEER GE NORTH BINNAGURI | JALPAIGURI | WEST BENGAL | 735232 | L-2 | Rejected-Finance Being L-2 | |
| 3 | L-3₹42.5 L+₹5.5 L (14.8%)Rejected-Finance P O BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L-3 | Rejected-Finance Being L-3 | |
| 4 | L-4₹42.8 L+₹5.8 L (15.6%)Rejected-Finance DURGA NAGAR CHECK POST PO ETHELBARI DIST ALIPURDUAR PIN 735204 WB | ALIPURDUAR | WEST BENGAL | 735204 | L-4 | Rejected-Finance Being L-4 | |
| 5 | L-5₹42.9 L+₹5.9 L (16.0%)Rejected-Finance PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L-5 | Rejected-Finance Being L-5 |
Tender Value
₹36 L
EMD Value
₹72,000
Closing Date
24 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (North) Binnaguri
GE North Binnaguri Post Binnaguri Dist Jalpaiguri West Bengal PIN - 735232
PROVN OF STORAGE ACCN AT BSO STORE YARD, PAVED AREA PLATFORM FOR FLAG BASE AND WAR TROPHIES AT NORTH ZONE, WALL CONNECTED WKS FOR OBSTACLE COURSE AT T JUNCTION NEAR ARMY SCHOOL, STEEL CAGE FOR PROTECTION OF WATER STORAGE TANK UNDER GE (N) BINNAGURI
2024_MES_658665_2
NIT No. 8701 / 05 / 2024-25 / 12 / E8
Open Tender
Civil Works
Item Rate
180 days
BINNAGURI CANTONMENT
Class D Category a (i)
8 documents required · 8 mandatory
₹500
GE (North) Binnaguri
₹72,000
Yes
26 Oct 2024
3 Sept 2024
26 Sept 2024
3 Sept 2024
24 Sept 2024
11 Sept 2024
Amount
Surface dressing n.exc 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum getting out in soft/loose soil and removing surplus soil to a distance not exceeding 100 Mtr and making good surface complete all as specified and as directed.
Excavating in trenches, n.exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.
M&L for Rolled Mild Steel work as in tubular trusses (CHS, RHS & SHS) including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 or IS-4923-1968 and Plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment confirming to IS-1730 (Part-I)-1974, bands, straps or stays, plain angle cleat or flat iron cleat or securing purlins to steel trusses or rafters, knee piece, securing clits at base and similar small articles, angle or other section with gusset plates, rails,braces, etc., complete, drilled forfixing of steel sheeting or other covering also fastening and fixing etc complete all as specified and as directed.
M&L for 75mm thick PCC (1:3:6) Type C-2 (40mm graded stone aggregate) as in plinth protection including finishing the concrete surface even and smooth without using extra cement complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n.exc 3 mtr long with 12 mm wide and 50mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed.
M&L for PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.
M&L for sand filling under floor well ramming including watering as required spreading & leveling in layers n.exc. 25cm thick complete all as specified and as directed.
M&L for hardcore using Broken stone or boulders of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface complete all as specified and as directed.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.
M&L for Diamond cut kota stone slab flooring 18-20mm thick, polished (mirror finish), crack resistance, optimum strength, cut to required size, having excellent stone resolvability, non-slippery, tough etc over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete with screed bed or bedding layer of mortar 20 mm thick for laying the same in cement mortar 1:6 complete all as specified and as directed.
M&L for providing Plain Cement Concrete Type B1 1:2:4 using 20 mm graded stone aggregate in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
M&L for brick work with fly ash bricks old size straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM 1:4 complete all as specified and as directed.
Removing excavated material n exc. 50m & deposited where directed at a level n.exc. 1.5m above the starting point complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.
M&L for 15mm thick rendering in cement mortar 1:6 on brick or concrete surface finished fair and even (without using extra cement) complete all as specified and as directed.
M&L for preparation of newly wall plastered surfaces and applying three coats of white / colour wash on wall to match the existing colour complete all as specified and as directed.
M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F pre-painted galvalume aluminum zinc coating GI based Plain or curved crimped steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F fibre glass reinforced translucent corrugated sheeting with two corrugations side lap /plain sheeting fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.
Material & Labour for 40 mm thick PCC 1:2:4 Type B-0 using 12.50 mm graded stone aggregate as in damp proof course to horizontal or vertical surface including necessary form work complete all as specified and as directed.
Spreading and levelling in layers n exc. 25 cm thick of excavated soil as in plinth filling etc complete all as specified and as directed.
M&L for 150mm thick PCC 1:3:6 type C2 using 40mm graded stone aggreegate as in sub base complete all as specified and as directed.
M&L for 10mm thick anti-skid pavement tiles, each tiles n.exc 0.40Sqm area of approved color & Shade and in anti skid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Note: Design/pattern shall be as approved by GE at the time of execution.
M&L for RCC type B1 1:2:4 using 20mm graded stone aggregates (nominal mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including crabking, bending spirally for hooping for column, hooking ends and binding with including mild steel wire annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
M&L for DIGITAL ELEVATION TILES area of each tiles not exceeding 1.0 sqm, 7-8mm thick on vertical surfaces such as skirting, dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendenring in CM 1:4 on brick wall complete all as specified and as directed.
M&L for RCC type B1 1:2:4 using 20mm graded stone aggregates (nominal mix) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.
M&L for RCC type B1 1:2:4 using 20mm graded stone aggregates (nominal mix) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and as directed.
M&L for RCC type B1 1:2:4 using 20mm graded stone aggregates (nominal mix) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7-8mm thick (squares/rectangular) area of each tile not exceeding 1.0 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed CM (1:6) 15mm thick complete all as specified and as directed.
All as per item No 28 herein above but 5mm dia and over upto to and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
M&L for form work to sides of concrete foundations, footings,plinth beam etc. for rough finished surfaces of concrete complete all as specified and as directed.
M&L form work to sides of concrete for columns, pillars, posts, sturts for rough finished surfaces of concrete complete all as specified and as directed.
M&L for form work to sides and soffits floor or roof beams for rough finished surfaces of concrete complete all as specified and as directed.
M&L for form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter for rough finished surfaces of concrete complete all as specified and as directed.
M&L for Rolled Mild Steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work confirming to Fe. 290 Gde-E-165 complete all as specified and as directed.
Shri Amarnath Sah (BID ID -3110189)
BBKundu (BID ID -3109734)
R.MANJIT& CO (BID ID -3109587)
L. B. SHARMA (BID ID -3110988)
BINOD TRADING CO. (BID ID -3109405)
SS SHARMA (BID ID -3110843)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .