PETTY REPAIRS TO B/R NATURE WORKS FOR LEAKAGE, SEEPAGE, FLOORING, RAILING, GRANITE WORK, PLUMBING, JOINERY ROOF TREATMENT ETC IN DIBER HALDWANI

Amount

Contract Details

Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 15mm dia pipes complete all as specified and directed.

Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed.

S&F 15 mm dia (normal bore) galvanised iron water tubing 'medium grade'with and including all GI fitting such as unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S&F 20 mm dia (normal bore) galvanised iron water tubing 'medium grade'with and including all GI fitting such as unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S&F in repair 20mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed fixed complete all as specified and directed

S&F in repair 15 mm bore dia Stop cock fancy type Chromium plated screwed down, high pressure, with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm bore dia Bib taps chromium plated with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repiars pillar taps cast copper alloy with capstan head Chromium plated (fancy type), screwed down high pressure with or without lettered Hot or cold with long screwed shank and fly nuts screwed for 15mm bore iron pipe complete all as specified and directed

S&F in repair 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F in repair 600x450 mm bevelled edge of slected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed.

S&F in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between falnges complete all as specified and directed.

S&F in repairs PVC syphonic action type low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, 32 mm PVC flush pipe and necessary fixing arrangements and connecting to water pipe, complete all as specified .

S&F in repair 15mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed fixed complete all as specified and directed

Taking down cement plaster on brick walls including. raking out joints, hacking for key, scrubbing down with water etc all asspecified and as directed.

M&L10mm thick cement plaster on fair faces of brick work or concrete surface on wall even and smooth without using extra cement in CM 1:6 finished fair and even complete all as specified and directed.

M&L 15 mm thick cement plaster other than fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed.

M&L Rendering 5 mm thick in cement mortar (1:3) on ceiling concrete surfaces finished even and smooth without using extra cement, complete all as specified.

M&L Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening, complete all as specified.

M&L Preparation of new plastered surfaces of wall and applying two coat of cement base paint (snowcem) white or tinted complete all as specified and directed.

M&L Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

Demolition of Brickwork or stone/boulder masonry, built in lime mortar Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles as directed.

M&L for Brick work with subclass ‘B’ bricks, with cement mortar 1:6 straight or curved on plan exc 6m mean radius, with curing and finishing including all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for any work as directed and specified .

M&L for Reinforced cement concrete (nominal mix) in type B0 1:2:4(12.5 MM graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and as directed and specified .

M&L for Reinforced cement concrete (nominal mix) in type B0 1:2:4(12.5 MM graded aggregate) in chajjas as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof padding, 40mm thick, finished the surface fair and even all as specified and as directed.

M&L for screeding 10mm thick in CM 1:4 using water proofing compound, finished even and smooth without using extra cement complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid separately under respective item of Sch A (BOQ).

Supplyt only Liguid water proofing compound complete all as specified and as directed

Material and labour for APP based polymeric water proof membrane, minimum 3 mm thick and weighing not less than 3.6 kg per square metre, black finish reinforced with non woven polyster matt with thermo finish laid over compatible bitumen primer @ 0.30 liters per square metre and applying a layer of blown grade bitumen (conforming to IS -702) 85/25 @ 1.20 Kg/Sqm with help of torching with a proplane or a butane gas using torch with minimum overlap of 75 mm at side and 100 mm at ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions.Complete all as specified and as directed. For parapet the membrane will be taken to a height of 30 cm and then inserted inside the parapet in a groove (No separate payment will be made and the measurement will be done for horizontal surface ).Including applying a coat of 85/25 penetration Industrial bitumen over top surface @ 1.2 kg/Sqm and binding materials such as sand in dry condition @ 0.5 to 1.00 Kg/Sqm shall be dusted over the bitumen complete all as specified and as directed. (Note :- 1. APP based polymeric water proofing membrane shall be purchased directly from the manufacturer or their authorized distributors) .

Demolition of Laid bedded and pointed in any mortor Stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified .

Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified.

S&F non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 Sqm but n exc 0.11 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick rendering in CM 1:4 complete all as specified and as directed.

S&F non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.6 Sqm but n exc 0.11 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 200 x 200 x 7mm thick on vertical surface , skirting/dedos etc over screed bed or bedding layer of mortor 10 mm thick in cement mortor 1:4 complete all as specified and as directed.

Hacking out old broken glass (any thickness), size quality or description from wooden frames/ steel window complete all as specified & directed

S & F 3mm thick figured glass pin headed type, ordinary quality, glazing with oil putty or fixed with wooden beads in steel/wooden windows in squares n.exc 0.50sqm each pane at any floor/hight complete all as specified & directed.

S & F 3mm thick sheet glass, ordinary quality, glazing with oil putty or fixed with wooden beads in steel/wooden windows in squares n.exc 0.50sqm each pane at any floor/hight complete all as specified & directed.

S & F Repairs for Harrison rails of anodised aluminium alloy curtain rails with fixing brackets and stop rollers fixing with screw complete all as specified and as directed.

Taking down shutters of any description exc.1 Sqm & n.exc 2 Sqm each complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed .

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50 Sqm and n.exc 4.00 Sqm each. complete all as specified & directed.

M&L for second class hard wood plain ,solid ,straight chowkhat and framed rebeated on solid rounded chamferred put together with glue pinned at joint complete all as specified and directed.

M&L for 35mm thick kiln seasoned and chemically pressure treated second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), complete all as specified and directed.

S&F 35m thick second class hard wood glazed and skeleton door shutters , open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framming plain, chamfered or rounded fitted with cut and mitred beads or securing glass etc, size of members of shutters all as per clause No 8.20 (a) of SSR Part-I (2009) complete all as specified and directed.

S & F 30mm thick second class hard wood glazed and skeleton shutters for window/ventilator with sash bars & size of members of shutters as per clause No 8.20 (b) of SSR Part-I (2009) complete all as specified and directed.

S & F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both side complete all as specified & directed.

M & L solid PVC door frames of size 50mm X 47 out of 5mm plain colour PVC sheets reinforced with MS Square tube supplying and fixing in openings as per manufacturers instructions complete all as specified and directed.

S & F factory made solid PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded wood grain print PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for tp rail & bottom rail, panelling of wood grain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to geter with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified & directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified & directed.

S&F butt hinges 100mm long, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified & directed.

S&F butt hinges 75 mm long, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.

S&F aluminium handles cast type anodised, 125 mm long complete all as specified & directed.

S&F aluminium handles cast type anodised, 100 mm long complete all as specified & directed.

S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed.

S&F aluminium anodized barrel tower bolts 150mm long, of extruded section complete all as specified & directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.

M&L for preparation of new wooden surfaces with any description not otherwise described, over 10cm width or girth and applying two coat of Synthetic enamel over a coat of pink primer complete all as specified and directed.

S&F in repairs mortice lock, vertical type, aluminium, anodised body size 100 mm 2 livers as specified and directed.

Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract.

Pushkar Dutt Bhatt (BID ID -3088692)

RAJ BUILDERS (BID ID -3094715)

SIDDHIDATRI CONSTRUCTION (BID ID -3095167)

Prem singh kuwarbi and co (BID ID -3095389)