SPL REPAIR TO BLDG NO T-48 AT PC COY AND PROVN OF LADIES TOILET NEAR BLDG NO P-140 OF GP HQ COY UNDER GE ROORKEE

Amount

Demolition of concrete (Un-reinforced) including stone slabs etc in ground floor and paving etc in n exc 15 cm Thick below or above GL complete all as specified and directed.

Demolition of reinforced concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20 mm graded aggregate) as in plinth protection, floor etc, laid in panels not exc 1.80 sqm each and filled with mastic fillig of bituman and sand all specified,finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded aggregate) as in sub base of floors complete all as specified and directed.

M&L 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in sub floor and levelling coarse etc complete all as specified and directed.

Demolition of concrete in roofs, floor (other than ground floor), chajjas and other similar suspended work complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in coping/ kerbs/stops rounded or chamfered on edges etc complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Dismantling of Brickwork masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L For Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Fair finished formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for brick work in CM 1:6 using Sub class ‘B’ Bricks straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M & L for brick work in CM 1:4 using Sub class ‘B’ Bricks straight or curved on plan any radius in half brick complete all as specified and directed.

M&L for precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) in manhole covers including necessary form work and fixing in position in cement mortar (1:4) complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding of edges where required all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars but 5mm dia and over upto andincluding 10mm dia in stirrups, spacers, cut to length, bent to shape required ,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m but not exc 2 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) not exc 1.5 Sqm each including necessary cutting holes and making good using PCC (1:2:4) Ty B-0 complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each including necessary cutting holes and making good using PCC (1:2:4) Ty B-0 complete all as specified and directed.

S&F for Powder coated anodised aluminium frame for doors, windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F for Powder Coated aluminum door shutters, having top rail of size 83.50x44.45x1.87, Middle rail of size 83.50xmm x 44.50x2.11mm, bottom rail of size 101.60mmx44.50x2.50mm mm and side vertical rail of size 85.00mmX44.45X1.80mm aluminum section including necessary joining cleats, glazing clips, rubber neoprene packing, 2 Nos powder coated handles 200mm long in each door, 250mm long powder coated tower bolt, hinges if required, mortice lock, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F for Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, 4mm thick plain glass with sun control film, Powder coated aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.), suitable handle (1 no.) and 100mm long tower bolt (2 No) in each shutter complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S/S screws, all as per direction of Engineer-In-Charge. (Note : Butt hinges and necessary S/S screws shall be paid separately)

S & F Factory made single extruded WPC (Wood) Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed S/S screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/ S/S dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or S/S dash fasteners shall be paid for separately).

S&F Powder Coated anodised aluminium grill of 50x50x5mm size (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per direction of Engineer in-charge.

S&F 30mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F sheet glass 5.5 mm thick ordinary quality and glazing with neoprene beading to aluminium frame complete exc 0.5 sqm in each pane complete all as specified and directed.

S&F sheet glass 5.00 mm thick ordinary quality and glazing with neoprene beading to aluminium frame complete n exc 0.5 sqm in each pane complete all as specified and directed.

S&F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre-laminated shutter for aluminium door, kitchen cupboard, room cupboard and bathhroom cupboard. The laminated shutter should be 12 microne pre mainated side with different design density not less than 650Kg/cum manufactured by an ISO 9001:2015 certified company fixed with screws to timber/ aluminium frame work complete all as specified and directed.

M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of steel, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L ultra charged vitrified Ceramic Light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

-Ditto- but as in skirting over 15mm thick rendering in CM (1:6).

M & L for glazed ceramic colour joint free tiles in vertical surface size 450X 350X7mm/450x300x7mm/ 600x300mmx7mm thick as required set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for Non skid Ceramic tiles 7 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for Non skid Ceramic tiles 7 to 10 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L Udaipur green (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding of edges where required complete all as specified and directed

Taking down cement plaster of any description on Brick walls including racking out Joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm Thick in CM (1:6) on Brick surfaces, rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for rendering 15mm thick consisting of two coats, top layer 5 mm thick in CM 1:4 (mixed with WPC) over 10mm thick layer in CM 1:6, on fair faces of brick work (WPC shall be measured & paid separately) finished even & fair complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed

M&L for complete removal of existing treatment on surfaces of walls by scrapping down with mechanical grinder on old walls as per the specification of manufacturers instructions of paints/OBD complete all as specified and directed.

M&L preparation of newly or old treated plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm complete all as specified and directed .

M&L preparation of newly or old treated plastered surfaces of walls applying with 2 coat of oil bound distemper over a coat of 2mm thick putty on wall, complete all as specified and directed.

Dismantling timber scantlings 40 sq cm and over in section, in any position, framed work complete all as specified and directed.

M&L for rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde E-250) complete all as specified and directed.

M&L for mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde E-250) complete all as specified and directed.

M&L for mild steel bolts of dia 16mm purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified and directed.

M&L preparation new steel surface over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Taking down asbestos (corrugated, semi-corrugated etc) sheets in roof covering complete all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including necessary cutting chases to bk work and making good by filling the pcc (1:2:4) B-0 between the gap of roof sheet and wall, complete all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of wall/ceiling boards Asbestos plywood of any thickness including cover fillets complete all as specified and directed.

Providing and fixing tiled false ceiling of designer tiles (high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling/truss using GI soffit cleats fixed to existing RCC lintel/truss with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width complete all as specified and directed.

S & F in repairs of 25 mm dia steel complete fancy type CP curtain rod with and including steel type brackets, stops, of suitable size & side caps etc. complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore GI steel tubing medium grade with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases and filling with CM (1:3) if necessary complete all as specified and directed.

S&F 20mm bore GI steel tubing medium grade with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases and filling with CM (1:3) complete all as specified and directed.

S&Fin repair for Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe)including necessary fixing bolts, 'P' or 'S' trap with white seat cover complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float, handle and PVC. 32 mm dia flush pipe including brackets of 10 Ltr capacity complete all as specified and directed.

S&F in repair vitreous china counter wash basin, white, Oval type, size 550x400mm, excluding taps, chain and plug and porcelain stopper but including waste coupling, exclusive of fixing of supply and waste pipe fixing complete all as specified and directed.

S&F in repair vitreous china pedestal type wash basin, white, Oval type, size 630x450mm, excluding taps, chain and plug and porcelain stopper but including waste coupling, brackets including cutting and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe fixing complete all as specified and directed.

S&F in repairs, 15mm dia bore brass CP mixer (Central hole basin mixer with 450mm long braided hoses) for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair for Angle cock, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed.

S&F for Flush pipe of polyethylene of high density or PVC. 32 mm dia for flushing cistern complete all as specified and directed

S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repair chromium plated fancy type 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S & F in repairs towel rail 600 mm long 20 mm dia Brass chromium plated fixed to wall D type with CP steel screws etc, complete all as specified and directed.

S & F 150 mm size MS pressed handles oval type stove enameled black, complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minium of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 200mm Mild steel, semi-barrel tower bolt, open cover, with sheet pressed barrel, stove enamelled black with bright bolt and fixed complete all as specified and directed.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed

S & F Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tack/ galvanised wire staple complete all as specified and directed. (ISI Marked)

S&F in repairs 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating cover including jointing with solvent cement complete all as specified and directed.

M&L for preparation of wood and wood based surfaces and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Dismantling water tanks of 500 Ltr capacity and removing to store complete all as specified and directed.

M&L 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve Ball valve (Make:- Prayag) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) multi floor trap, plain with grating cover including jointing with solvent cement complete all as specified and directed

M&L for rendering 15mm thick in cement mortar (1:3) mixed with water proofing liquid on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for cleaning of blocked/chocked sewer pipe line of 150 mm dia sewage line (n.exc 3.00 m in depth from top of manholes to bottom of pipe line) by rodding or by mechanical means and well flushing the complete line including removing of sludge/waste to low lying areas within 200m distance and burying the same properly to the entire satisfaction and including taking out and re-fixing of manhole covers in cement mortar 1:4 complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

M&L for Plain cement concrete(1:4:8) Ty D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed

M&L for Hard core of broken bricks, broken to gauge n exc 63 mm complete all as specified and directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed

Formwork to sides and soffits of floor or roof beams, beam hunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or flat rough surface) complete all as specified and directed

M&L for Reinforced cement concrete 1:2:4 Ty B-1 using 20mm graded stone aggregate (nominal mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L for Reinforced cement concrete 1:2:4 Ty B-1 using 20mm graded stone aggregate (nominal mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed

M&L for powder coated (50 micron thick) aluminum ventilator fixed type (partly glazed and partly gauzed) with gasket, glazing clip etc, weight of frame not less than 0.55 Kg/RM and weight of shutter frame not less than 0.425 Kg/RM complete all as specified and directed

S&F 4mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed

S&F for 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, fixed complete all as specified and directed.

S&F for 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150 mm long extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed.

M&L Rendering 15 mm thick on fair face on brick work in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 5 mm thick on other than fair face on ceiling in CM 1:3, finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new surface on ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M & L for preparation of new surface on walls and applying three coats of white wash complete all as specified and directed.

M&L for 40mm thick cement concrete type B-2, 1:2:4 (20mm graded aggregate), as in pcc padding over roof using WPC. (WPC will be measured and paid for separately) complete all as specified and directed

M&L for roof treatment with polymeric membrane (APP based) with non woven polyester mat as reinforcement with following:- (a) M&L for surface preparation clean smooth and dry surface and preparing the surface. (b) M&L for providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface. (c) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight of 3.0 Kg/Sqm with non woven polyster fiber as reinforcement on primed surface by torch application with side over laps & joints over laps etc as per manufacturers instruction. (d) M&L for finishing of top surface by two coat of aluminum paint over a coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm grouted all as specified and as per manufacturers instruction. (e) M&L for providing test with filling of water over roof slab continuously for 48 hours all as specified and directed.

M&L 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve (Ball valve) hoisted and fixed in position all as specified in SSR Part I.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe)including necessary fixing bolts, 'P' or 'S' trap with white seat cover complete all as specified and directed

S&F in repair PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed

S&F for Stop/angle valves, fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed suitable for 15mm bore pipe.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15mm bore.

S & F vitreous china squatting pan (Orissa pattern) long pan including connection to trap, and to flushing pipe , anti-syphonage pipe etc incl making good to floor fixed in repair size 580x440mm white with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush) complete all as specified and directed.

S&F vitreous china wash basin , white, flat back type, size 630x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe fixing complete all as specified and directed.

S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

M&L for 75mm dia PVC (SWR) iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

Demolition and breaking up drain pipes 150mm Dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed

M&L for 110mm PVC (SWR) WC connector with lip ring complete all as specified and directed

S&F 75mm bore PVC (SWR) bends any radium complete all as specified and directed

S&F 110 mm bore PVC (SWR) junction single,(Single T) equal or unequal complete all as specified and directed

PVC (SWR) vent cowl 75mm bore complete all as specified and directed

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm bore complete all as specified and directed

M&L 75mm thick plain cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in sub base complete all as specified and directed

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60, with grey cement and pigment, complete all as specified and directed

M&L SWG drain pipe 150 mm internal dia, grade `A' laid in trenches & jointed in cement mortar 1:1 complete all as specified and directed by Enginner-in-Charge.

M & L PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregrate) as in bed of drain pipes including packing under and haunching against sides of pipes after they are laid and tested for 150 mm dia, complete all as specified and directed by Enginner-in-Charge.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float, handle ,32 mm dia flush pipe including brackets of 10 Ltr capacity complete all as specified and directed

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F chromium plated fancy type 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F 110mm bore PVC (SWR) bends any radium complete all as specified and directed

M&L for new point wiring with PVC insulated PVC unsheathed electric (FRLS-H) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS-H) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including non-modular type GI sunken boxes with hylam sheet cover glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:3) with all necessary surface finishes such as distempering etc to match the existing surfaces complete all as specified for the following:-

One light point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all specified and directed .

One fan/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed.

All as per item No 144 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated (FRLS-H) but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm (FRLS-H) cable as earthwire complete all specified and directed.

S&F switch piano flush type white finish 5/6 Amps, single pole one way , 230 volts, 50 hz complete all as specified & directed.

S &F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz complete all as specified and directed

S&F switch piano flush type white finish 15/16 Amps single pole one way, 230 volts, 50 hz complete all as specified and directed

S &F socket out let 5 pin 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.

S&F fan regulator socket type, fulsh stepped type, compatible for BLDC ceiling fan complete all as specified and directed.

Supply and fix in replacement of bell push switch flush type 6 Amps, 240V, 50Hz, complete all as specified and directed

Supply and fix in replacement of electric call bell ding dong type, AC, 240V, 50Hz, complete all as specified and directed

M&L for Ceiling rose in poly carbonate 3 terminal brass flush type 6 Amps, 250 volts AC ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and directed.

Supply and fix single pole & neutral plastic enclosure prewired power unit with 25 Amp rated MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board including taking down existing unserviceable plug & socket board of any description and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.

S&F LED T-5 tube light batten 20 watts 4 fts extruded aluminuim housing, translucent diffuser with LED light source, minimum 2000 lumen, natural white, surge protection range-2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed.

Supply and fix in replacement of surface/recessed mounted LED panel light 2'x2' size, 36 watts, full white with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP / Amstrong / grid false ceiling complete with all fixing accessories including making electrical connection with PVC insulated and pvc sheathed twisted two core wire of suitable size complete all as specified and directed.

S&F Decorative ultra slim round profile LED Tube light fitiing with extruded polycarbonate, energy efficient for mirror light 9/10 Watt 2 ft with LED light source with uniform light output, fixed on site with all accessories complete all as specified and directed.

Supply and fixing sub main wiring two single core 4 sqmm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 4.0 Sqmm PVC insulated unsheathed copper conductor cable (FRLS-H) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified and directed

S&F new sub main wiring with two runs of 6.0 Sqmm 1100 Volt grade single core PVC insulated and unsheathed (FRLS-H) LT cable having multi stranded copper conductor, drawn through and including PVC non metallic conduit of 20mm / appropriate dia with all accessories and one run of 6.0 Sqmm 1100 Volt grade single core PVC insulated and unsheathed (FRLS-H) LT cable having multi stranded copper conductor complete all as specified and directed. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.

S&F BLDC Ceiling fan copper winded complete with three blades down rod , accessories 230 V, 1200mm sweep, BEE 5 star white with service value not less than 6 complete all as specified and directed. Note: Old Ceiling fan to be deposited in MES store Yard

M & L for clamp made out of flat iron of size 50 mm x 5mm suitable for fitting on 50 mm GI pipe for hanging of ceiling fan complete with nut bolts washer etc all as specified and directed.

S&F in replacemment exhaust fan PVC body 250mm sweep with louvers 240 volt single phase 900RPM including making hole as per exhaust size on brick wall and making good the disturbed surface by plaster as per existing surrounding complete all as specified and directed. Note: Old exhaust fan to be deposited in MES store yard

S&F and testing TP&N vertical load line (VTPN) 4 way 415 Volts 50 Hz indoor type double door sheet metal enclosure IP-43 DBs with copper bus bar not less than 200 Amp for each phase with two neutral bar & two earthbar and cable lies for cable management for provision of MCCB 100 Amps ICs=100% ICu, 16 KA four pole as incomer including connecting terminal strip complete and SP MCBs as outgoing complete pre-wired with suitable size copper conductor including taking out old unservicable DB and removing from site and making good of disturbed surface complete all as speciifed and directed.

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN (Single pole and neutral) 240V AC 8 way with 200 Amps rated copper busbar complete all as specified and directed.

Supply & fixing MCB, SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply and fix in replacement of MCCB 100 Amp, 16 KA, Ics = 100%Ics four Pole, 'B' curve, 415 V, 50 Hz complete all as specified and directed. Note: MCCB should be of same make as of VTPN 4 way

Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron, UL listed, CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 50kg/pit (resistivity is less than 0.20 Ohm meter). The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS-H insulated copper conductor of size 6 sqmm, single core cable drawn through and including light grade GI pipe of size 15 mm upto 7 mtr incl cutting and chases on wall and floor and aking good using PCC complete all as specified and directed. Note: On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (b) Rate quoted by contractor is inclusive of excation work for earthing and refilling the excavated soil around earth pit.

Dismantling & taking out old unserviceable LT UG cable & Supplying & laying in replacement of LT UG cable (Conforming to IS 1554) ISI marked 1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor in trenches / ducts/through HDPE pipe under roads of size 35 sqmm 4 core complete all as specifed and directed. Note:- The earth work shall be measured and paid sepretely under appropriate item of Sch A

Excavation in trenches in soft/disintegrated soil not exc 1.5 m wide and not exceeding 1.5m in depth for laying UG cable/foundation etc complete all as specified and directed.

Returning filling in soft/disintegrated soil including spreading levelling watering and well ramming in layers n.exc 25cm each layer complete all as specified and directed.

Removal of excavated surplus soft/disintegrated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L river washed and screeened dry fine sand filling in trenches below and above / around under ground cable for cable protection including punniing around cable complete all as specified and directed.

M&L for well brunt bricks sub class 'B' in old size as cable protection laid flat width wise complete all as specified and directed.

Supply and fix GI tubing light grade ISI marked of 50 mm bore dia complete all as specified and directed.

Labour and T&P for horizontal boring of hole passing through pavement/road/hardstanding by manual or mechanical means suitable for 50mm bore complete all as specified and directed

M&L for Design, supply, Fabrication, Installation, testing and Commissioning factory made, LT panel board, outdoor type, totally enclosed, dust and vermin proof, suitably ventilated, floor mounted, 415 volts, 3 phase and neutral, 50 hz, AC supply system, fully compartmentalised, made out of 3.00 mm thick CRCA sheet steel, protection of enclosure IP-54 as per IS : 2147 of 1962 with pre-treatment and powder coated of approved colour including suitable frame work/support made out of suitable size of angle iron/flat iron, front opening type with provision for cable entry, with proper ferrule and cable glands, internal wiring with PVC insulated multi stranded copper conductor FRLS-H cable of adequate size (minimum 1.5 sqmm), including required civil works/anchoring bolts for fixing, PCC foundation etc with and including following all as specified and directed : - INCOMER :- (i) MCCB 250Amps, 415Volts, 4 pole 50 Hz, 36 KA with thermal magnetic based released, in built instantaneous protection, Ics = 100 % Icu (1 sec) complete all as specified and directed. 01 Nos. (v) Phase Indication lamps (RYB), LED type - 01 No (set of three). OUTGOING:- Electrically grade shrouded aluminium bus bar for 03 Nos outgoing - 04 Nos of capacity 300 Amps for each phase and neutral and current density 0.8A/Sqmm

S&F in replacement LED bollard light 9/10 Watt LED as source light CDL/WW made out of pressure die cast powder coated housing with PC diffuser with LED as a source light height not less than 90 cm including making electrical connection and PCC 1:2:4 work for founation etc complete all as specified and directed including making electrical connection with pvc insulated and pvc sheathed twisted three core wire of size 1.0 sqmm complete all as specified and directed.

Supply and fix in replacement PVC / DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof suitable for outdoor installation for Gate light and Post top lantern, fixed on wall with screw & rawal plug and on GI Pipe wth suitable size MS clamp and Nut-bolts,washer of size outside dimension 170x170x105mm complete including one connector block three terminals with provn of 01 nos single pole MCBs 10-32 amps inside the box including taking out/down existing unserviceable junction box of any description complete all as specified and directed at site.

S&F in replacement of unserviceable off load changeover 415 Volt switch four pole with sheet metal enclosure 100 Amps current rating mounted on wall, including connecting all incoming and out going electrical connections complete all as specified and directed.

Supply and fix in replacement of old unserviceable LED Post Top Lantern/Gate Light light fitting 30/40 watt with LED as source light IP-65 protection & tranparent diffuser and fixing arrangement on new GI Pipe medium grade of dia 40 mm duly grouted on wall/brick pillar with the help of cement mortar including making electrical connection with pvc insulated and PVC sheathed twisted three core wire of size 1.0 sqmm complete all as specified and directed at site.

Supply and fix in replacement of 1100 old unservicable pvc insulated and PVC sheathed three core copper wire of size 1.0 sq mm including medium grade PVC conduit for providing electrical connections for LED bollard light including connecting on DB/junction box complete all as specified and directed.

Cutting existing steel tubing of size 50 mm for addition or alteration for water connection complete all as specified and directed.

Screwing existing steel tubing of size 50 mm for alterations or additions (or lengthening screw on pipe to form connector) and inserting Tee of size 50x25 mm or 50 x20 mm as per site requirement complete all ass pecified and directed.

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 4 way with 200 Amps rated busbar complete all as specified and directed.

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate complete all as specified & directed.

S & F LED Bulb 9 Watt (cool day light) having colour temp 6500 K and lumen output 950 suitable for lamp holder complete all as specified and directed.

S&F LED T-5 tube light batten 20 watts 4 fts with aluminium housing, translucent diffuser with LED light source, 2000 lumen, natural white, surge protection range-2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed.

Supply and fix ventilating / PVC exhaust fans fancy square type 225mm sweep, 900 RPM with plastic fiber body heavy duty 250 Volt AC, single phase complete with plastic louvers and including making suitable size of holes in wall for fixing the fan & making good including making electrical connection with ceiling rose including taking down existing unserviceable ventilating fan of any description complete all as specified and directed.

Supply and fix weather proof twin core aluminium cable of size 6 sqmm complete all as specified and directed.

Drilling and tapping cast iron water mains (in position) for branch connection of the internal dia of 20 mm complete all as specified and directed.

M&L for Straight plain brass ferrules (or connecting screws) screwed both ends and fixed to water mains for tapping branch connection of size 20 mm bore complete all as specified and directed.

IRFANAHMAD CONTRACTOR (BID ID -3134291)

G.H. INFRASTRUCTURE PRIVATE LIMITED (BID ID -3141015)

AMAR NATH SHARMA (BID ID -3134243)

BHAGAT JI ENTERPRISES (BID ID -3133909)

AJAY KUMAR CONTRACTOR (BID ID -3133674)

Alankar Traders (BID ID -3133623)

AMAN MATERIAL AND LABOUR CONTRACTOR (BID ID -3140821)

VIMAL CONSTRUCTION CO (BID ID -3141283)