ADDITION ALTERATION OF P-19 BUILDING AT CG ENCLAVE, CHICOLNA GOA UNDER GE(I)(CG) GOA

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stone work and precast concrete articles.Complete all as specified and directed.

Material & Labour for Pre-cast cement concrete block masonry with solid blocks,exc. 10 cm in width and setting in mortar,complete set in CM 1:6 TYPE C1 1:3:6.Complete all as specified and directed.

Material & Labour for rendering 15mm thick in CM 1:6 on fair faces of brick/concrete walls, finished even and smooth without using extra cement Complete all as specified and directed.

Material & Labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer including 3mm wall care putty Complete all as specified and directed.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc.

Material & Labour for Vitrified Ceramic coloured dark shade tiles 10 mm thick (square/rectengular) polished, area of each tile n. exc 0.36 sqm as in floors/vertical surface, set and jointed in neat cement slurry and pointed in coloured cement to match the surface including screed bed of 15 mm thick of cement mortar 1:4 Complete all as specified and directed.

Material & Labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.Complete all as specified and directed.

Supply and installation of automatic sliding sensor door for commercial building.Specifications:Door Type: Automatic sliding sensor door Material: 12 mm thick tuffon/tempered glass Door Size: [Specify dimensions of door is 2100mm (H) x 3200mm (W),in 4 parts each parts have width 800 mm and 2 parts fix in both side and 2 parts are open in center with automatic sensor a distance of 5 m . Sensor Type: Infrared motion sensor Control System: Microprocessor controller Motor: Brushless DC motorPower Supply: 220V, 50HzSafety Features: Emergency stop button, anti-pinch sensors, battery backup Complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water Complete all as specified and directed.

Supply & Fix Glazed ceramic tiles in coloured tiles on vertical surface 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in CM 1:4 on fair faces on brick/ concrete surfaces Complete all as specified and directed.

Taking down and refixing in other opening of chowkats or frames exc 1.5 Sqm each but not exc. 4 sqm each with shutters (without taking off shutters from the frame) including holes for taking out hold fasts or dismantling brick work for holes (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) Complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm each but not exc. 4 sqm each with shutters (without taking off shutters from the frame) including holes for taking out hold fasts or dismantling brick work for holes (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) Complete all as specified and directed.

Taking down chowkats or frames n. exc 1.5 Sqm each with shutters (without taking off shutters from the frame) including holes for taking out hold fasts or dismantling brick work for holes (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) Complete all as specified and directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. Complete all as specified and directed.

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 Complete all as specified and directed.

Supply & Fixing Aluminium anodised, butt hinges of size 100 mm Complete all as specified and directed.

Supply & Fixing Aluminium anodised, barrel tower bolts of extruded section and fixed,200 mm long Complete all as specified and directed.

Supply & Fixing Extruded aluminium alloy handles, fabricated type anodised 150 mm long Complete all as specified and directed.

Supply & Fixing Aluminium alloy, anodised, sliding door bolt of size 200 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed Complete all as specified and directed.

Material & Labour for mild steel hold fast clamps of 200mm length of bolt or similar small articales confirming to Fe 410 or Fe-310- Complete all as specified and directed.

Supply & Fixing Factory made UPVC white colour three track three panels sliding window Including 5 mm thick glass with fly proofing Stainless steel wiremesh ( two Nos glazed & 1 No wire mesh panels) upto 1.5 M height made of (Big series) frame 108mm x 52mm & sash 38mm x 60mm both having wall thickness of 2.3+/- 0.2mm and single glazing bead/double glazing bead of appropriate dimension.( Area of window 1.75 sqm above) comprising of UPVC multi chambered frame,with inbuilt roller track and sash extruded profiles duly reinforced with 1.6 + ot - 0.2mm thick galvanised mild steel section made from roll forming process of required length(shape & size according to UPVC profile) appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy body with single nylon rollers(weight bearing capacity to be 40 Kg), GI fasteners 100mm x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc.Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality Complete all as specified and directed. [Note:- Glass or wire mesh shall be paid separately]

Supply & Fixing 12 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required.including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) Complete all as specified and directed.

Supply & Fixing Stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel staples Complete all as specified and directed.

Dismantling Single layer Mangalore pattern or similar tiles in roofing Complete all as specified and directed.

Supply & Fixing Plates(Plain or chequerred) channels,square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment of Fe- 290 (Gde E- 165) Complete all as specified and directed.

Supply and fixing Rolled sections as in main and cross beams,hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of Fe-410 (Gde E-250) Complete all as specified and directed.

Supply & Fixing Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long and dia of neck Exc 12, n.exc 20mm Complete all as specified and directed.

Supply & Fixing pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550 MPA as in roof covering/cladding fixed with self tapping screws Complete all as specified and directed.

Supply & Fixing pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of an colour having tensile strength of 550 MPA as in roof covering/cladding fixed with self tapping screws Complete all as specified and directed.

Supply & Fixing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application Complete all as specified and directed.

Material & Labour for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of primer Complete all as specified and directed.

Anodised aluminium snap grid frame work for false ceiling Complete all as specified and directed.

Material & Labour for Hangars 6mm dia (upto 1200mm length) adjusting level fixed to frames by means of ceiling cleats made out of GI flat 40x3mm size 60cm long and expansion hold fasterners 1 complete suitable to as in steel truss roofing members/purlins Complete all as specified and directed.

Material & Labour for Providing and fixing 10mm thick plaster of paris ( POP) ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) Complete all as specified and directed.

Material & Labour for Providing and fixing 10mm thick plaster of paris ( POP) ceiling (Gypsum anhydrous) to curved surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) Complete all as specified and directed.

Material & Labour for Vitreous china European type water closet with inbuilt flushing cistern and with seat cover fixed with all necessary acessories for fittings Complete all as specified and directed.

Supply & Fixing vitreous china wash basin, white flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand incl 15mm bore, pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated. PVC connection 15mm dia 45cm long and 32mm dia PVC waste pipe and CP coupling Complete all as specified and directed.

Supply & Fixing 15 mm bore, fancy type chromium Stop valves, angle cock, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed plated cast copper alloy screwed down, high pressure with crutch and screwed both ends for iron pipe or for unions Complete all as specified and directed.

Supply & Fixing 15 mm chromium plated fancy bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipesor for brass ferrule and fixed Complete all as specified and directed.

Material & Labour for cutting chases, for concealed water tubing and making good, cutting not exc 10 cm girth in CM 1:3 Complete all as specified and directed.

Supply & Fixing brass chromimum plated shower rose of size 125mm with or without swivel joints including fixing with 15mm bore pipe Complete all as specified and directed.

Supply & Fixing 15mm bore fancy type stop valve long neck cast copper alloy screwed down high pressure with capston head handle chromium plated conceled type screwed both end for iron pipe or for unin Complete all as specified and directed.

Supply & Fixing Pillar taps fancy type 15 mm bore cast copper alloy, with capstain heads, chromium platedscrewed down high pressure, with or without lettered "Hot" of "Cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed Complete all as specified and directed.

Supply & Fixing PVC (SWR) floor trap plain with greating including jointing with solvent cement & fixed of 75 mm dia out let Complete all as specified and directed.

Supply & Fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect Complete all as specified and directed.

Supply & Fixing aluminium anodised tubular towel rail 20mm dia, D type, 60cm long between flanges Complete all as specified and directed.

Supply & Fixing PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to wall of 110 mm dia bore Complete all as specified and directed.

Supply & Fixing (SWR) bend of 110mm radius Complete all as specified and directed.

Supply & Fixing 110mm PVC (SWR) junction single, (single T) equal or unequal with access door Complete all as specified and directed.

Supply & Fixing PVC (SWR) vent cowl of 75 mm bore Complete all as specified and directed.

Supply & Fixing PVC (SWR) pipes single socketed in any length with rubber ringh joint fixed to wall of 75mm dia bore Complete all as specified and directed.

Supply & Fixing PVC (SWR) bend of 75mm radius coplete all as specified .Complete all as specified and directed.

Supply & Fixing 75 mm PVC (SWR) junction single, (single T) equal or unequal with access door Complete all as specified and directed.

Supply & Fixing 110mm PVC (SWR) junction single, (single Y) equal or unequal with access door Complete all as specified and directed.

Supply & Fixing 75mm PVC (SWR) junction single, (single Y) equal or unequal with access door Complete all as specified and directed.

Supply & Fixing 20mm bore steel tube medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floors Complete all as specified and directed.

Supply & Fixing 15mm bore steel tube medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floors Complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm Complete all as specified and directed.

Material & Labour for Cement concrete in sunkun floor type E-2 1:5:10 (40 mm graded), filling and mass Complete all as specified and directed.

Material & Labour for Cement concrete 25 mm thick type B-0, 1:2:4 (12.5mm graded aggregate) Complete all as specified and directed.

Material & Labour for 15mm thick rendring in cement mortar 1:3 on fair faces of brick/floor or concrete surfaces finished ceven and soomth without using extra cement and using with water proofing compound Complete all as specified and directed.

Material & Labour for for applying evenly a tack coat of industrial bitumen 85/25 at the rate 12 Kg per Sqm incl cleaning surfaces Complete all as specified and directed.

Supply and fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed Complete all as specified and directed.

Material & Labour for Aluminium (Diecast) body door closer hydraulically regulated,designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed Complete all as specified and directed.

M/s. ARK BUILDERS (BID ID -3370258)

M/s Gayatri Contruction Co. (BID ID -3383262)