Work related to necessary repairs, renovation, and associated civil works for the CTM Gymnasium and swimming pool in Indrapuri Ward, as well as various municipal buildings (ARC Tender)

Name of work :-ઈ રુ વોડમાં આવેલ િસ.ટ .એમ નેશીયમ તથા વીમ ગ ુ તેમજ

I. No. Qty Description Rate Unit

1 Demolition incl. stacking of serviceable materials

& disposal of unserviceable materials with all

lead and lift.(Bldg.SOR.2021-2022)

2.00 (a) R.C.C. work (20.3,page 217) 698.25 Cmt

10.00 (b) Brick work in Cement mortar (20.11,page

50.00 (C) Plaster (CH NO. 20 ,20045,PG NO -186) 12.92 Smt

50.00 (d) Tiles or Stone flooring (I.No.20.23 I.C NO.-

0.00 (e) Sheet roofing (G.I. Or A.C.) (I.No.20.27 I.C

10.00 (f) Doors,Windows ventilators (wood/steel)

2 0.00 Dismantling barbed wire fencing / Chainlink

Fencing including making rolls and also including

dismantling fanning posts including all earth

work concrete in the base and making

good the disturbed ground stacking unseal

materials as directed and disposing all the

unserviceable materials with all leads al lifts &

carting to AMC Store as directed by engg. in

charge (SOR 2021-22 I.No.20.49 I.C NO.-20014,

3 Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(A) Loose or soft soil(SOR

0.00 (a) 0 to 1.5 mtr depth 77.28 Cmt

0.00 (b)1.5 to 3.0 mt. depth. 85.68 Cmt

0.00 (c)3.0 to 5.0 mt. depth 94.07 Cmt

4 0.00 Providing and laying cement concrete 1:4:8 (1 -

Cement : 4-Coarse sand : 8-Graded Brick bats

aggregate 40 mm normal size) and curing

complete excluding cost of form work in (A) 2378.20 Cmt

Foundation and Plinth (upto 10 ton) (Bldg.Sor

0.00 (B)Provdg. & laying cement concrete 1:4:8 (1

cement : 4 coarse sand : 8 hand broken stone

aggregates 40 mm nominal size) and curing

complete excluding cost of form work in 2062.50 Cmt

Foundation and plinth. (Bldg.Sor 2021-22,item

Providing & Applying Tremix method ( Vaccum

de extracted & Powered trowelled ) for Concrete

Flooring with necessary finishing either smooth

6 0.00 or wire finish as approved by consultants. Rate

shall includes the rate of side shuttering with

channel , rails to form panels etc. complete.

Providing and laying controlled cement concrete

M-200 and curing complete, excluding the cost of

7 form work and reinforcement for reinforced

concrete work in: (Bldg.Sor 2021-22)

(A) Foundations, footings, base of columns, and

0.00 mass concrete.(Item no.5.8.2, 05024AA) 3874.20 Cu.M.

(B) Walls from top of foundations/level up to floor

0.00 two level. (Item no.5.8.2, 05024BA) 4199.80 Cu.M.

(C) Slabs, landings, shelves, balconies, lintels,

0.00 beams, girders and cantilever upto floor two 4187.70 Cu.M.

level.(Item no.5.8.2, 05024CA)

(D) Columns, pillars, posts and struts upto floor

0.00 two level. (Item no.5.8.2, 05024DA) 4255.90 Cu.M.

(E) Staircase up to floor two level.(Bldg.Sor

2021-22, item Code 05024EA,5.8.2)

(K) Vertical and horizontal fins up to floor two

0.00 level. (Bldg.Sor 2021-22, item Code 4338.40 Cu.M.

Filling in plinth with sand under floors including

watering ramming, consolidating and dressing

complete . (Bldg.Sor 2021-22,item

Code04007A,4.24)

Filling Available Excavated Earth (Excluding

Rock) In Trenches,Plinth,Sides Of Foundations

Etc.In Layers Not Exceeding 20 Cm.In Depth

Consolidation Each Deposited Layer By

Ramming And Watering.(SOR 2021-22,I.

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm.

10 1.00 thicknessincluding watering, ramming and 215.54 Cu.m

consolidating etc. complete. (Bldg.Sor 2021-22,

item Code 04008A,0.00)

Providing form work in ordinary timber planking

so as to give a rough finish including centering,

shuttering, strutting and propping etc. height of

11 propping and centering below supporting floor to

celling not exceeding 4 M & removal of the same

for in situ reinforced or plain concrete work

in(Bldg.Sor 2021-22 CH. NO 9, I. NO 9.1)

(A) Foundation, footings, bases of columns etc.

and mass concrete.

(B) Flat surface such as soffits of slabs, landing

0.00 and the like (I) Floors etc. 200 mm in thickness. 168.00 Sq.M.

(C) Vertical surface such as walls (any thickness)

0.00 partitions and the like including attached but 153.30 Sq.M.

tresses & string course & the like.

(D) 1.Columns Pillars Posts and struts.(1) Square

0.00 Rectangular Polygonal in plan. 198.45 Sq.M.

2. Columns, pillars, posts & struts.(2)Circular

or curved in plan.

E (1) Sides and soffits of beam, haunchings

0.00 cantilevers, girders, bressumers and lintels not 128.10 Sq.M.

exceeding 1 M in depth.

(2) Sides and soffits of beam, haunchings

0.00 cantilevers, girders, bressumers and lintels 173.25 Sq.M.

exceeding 1 M in depth.

(L) chullah hoops, weather sheds, chhajas,

carbels etc including edges.

(M) Staircase with-sloping or stepped soffits incl.

risers & strings excluding landing.

0.00 (Q) Vertical fins and vertical sun breakers. 255.15 Sq.M.

Provdg. & laying cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of form work and

reinforcement for reinforced concrete work in

(P.74,Bldg.Sor 2021-22 CH. NO 5, I. NO 5.4.1)

(A) Foundations, footing, of columns and mass

1.00 concrete 3624.50 Cu.M.

(B) Slabs, landings, shelves, balconies, lintels,

1.00 beams, girders and cantilever upto floor two 3687.20 Cu.M.

(C) Columns, Pillars posts and struts upto floor

Providing TMT Bar FE 415 reinforcement for

R.C.C. work including bending,binding and

13 50.00 placing in position complete upto floor two 62.61 Kg

level.(Bldg.Sor 2021-22,item no.5.4.11,

Brick Work Using Common Burnt Clay Building

Bricks Having Crushing Strength Not Less

14 5.00 Than 35 Kg/Sq. Cm. In Cement Mortar 1:6 (1 2814.90 Cmt

Cement : 6 Fine Sand) (A) In foundation and

Plinth(Bldg.Sor 2021-22,item no.6.13, 06002BA)

Extra for brick work in super structure above

15 10.00 plinth level upto floor two level (B) Conventional 181.50 Cmt

.Half Brick Masonry In Common Burnt Clay

Building Bricks Having Crushing Strength Note

Less Than 35 Kg/Sq. Cm. In Cement Mortar 1:4

(1 Cement : 4 Coarse Sand) In Foundation

and plinth (Bldg.Sor 2021-22,item no.6.3,

Extra for half brick masonry in super structure

17 50.00 above plinth level upto floor two level. (B) 35.20 Smt

Conventional (I.C NO 06010B)

Providing cement plaster in single coat on

brick/concrete wall for interior/exterior plastering

upto any floor level finished even and smooth in

18 CM 1:3 incl. finishing with floating coat of neat

cement slurry, with necessary scaffolding etc.

complete(Bldg.Sor 2021-22,item no.17.6,

Extra over above item for Ceilling plaster on

19 200.00 Ceilling and soffits of stairs up to any floor 16.38 Smt

(app.rate) (P.201,Ch.17.,Item No.17.91,17006)

Providing 20mm thick double coat sand

face/mala cement plaster on interior

brick/concrete work for plastering comprising o f

base coat of 12mm thick cement plasterin

cement mortar (1Cement:4coarsesand) in rough

finishing and 8mm thick t op coat of cement

mortar1:2 (1Cement:2Coarsesand) finished with

trovel including scaffoldingcuring etc.

complete.(Bldg.Sor 2021-22

Providing & laying Stone chips Plaster with /

without grooves for making panels incl.backing

coat of plaster in C.M.(1:3) in grey cement as per

dir.Of consultants.(N.S/ARC.)

Providing & Applying Cement Popada

Plaster In Cement Mortar In 1 : 3 Incl.

22 50.00 Cleaning Surface Before Plastering Rate Also 120.00 Smt

Incl. Scafloding, Watering , And Neat

Finishing Etc. Comp. As Dire.(N.S./ARC)

Providing and applying fibere reinforced

cementitious micro concrete work in cellings and

beams incl.mixture of CEMSCREED HM (F) fair

mate company material, FBR bonding agent

23 0.00 material with water in suItable proportion anti 530.00 Sq.M.

corrosive treatment on exposed beam,celling

steel bars with safeCore R incl.all kind of labour

etc.comp.including three coat of white

wash.(Approved Rate in ARC)

Providing And Laying Polished Kota Stone

Slab Flooring Over 20 Mm. (Average) Thick

Base Of Cement Mortar 1:6 (1 Cement :

Coarse Sand) Or Lime Mortar 1:1.5 Laid

Over And Joined With Grey Cement Slurry mixed

with pigmentt omatchtheshade of slab including

rubbing and polishing

etc.complete.(A)25mmthick. (Bldg.Sor 2021-22

Providing and laying Rough chiselled dressed

(kota stone green) stone flooring over 25 mm.

thick base of cement mortar 1:5 (1 cement :

coarse sand) or L.M. 1:1.5 including pointing with

cement mortar 1:2 (1 cement : 2 coarse sand)

etc. complete.(P.187,Item No.14.46,14014A)

Labour Work for moulding the polish kota stone

surface rate also including provding cutting and

grinder machine for molding work etc.complete

as directed.(app.rate)

Labour work for Polish kota stone surface rate

also including providing cutting and grinder

machine for molding work etc comlete as

directed.(app. rate)

Providing And Laying Cement Concrete

Flooring For I.P.S.1:2:4 (For Indian Patent

Stones) (1 Cement: 2 Coarse Sand:4 Graded

28 50.00 Stone Aggregate 20 Mm. Nominal Size) Lain 198.45 Smt

In Layer Finished With A Floating Coat Of

Net Cement.(40 Mm Th.)(SOR 2021-22

P.160,Item No.14.71,14015AA)

Additional Rate For Providing Water Proofing

Solution in I.P.S

P & L 24"x24" vitrified 8mm thick tile flooring over

20mm (average) base of cement mortar

1:6(1cement:6coarsesand) on new surface or

fixing on existing flooring by adhesive material

including dismentaling of existing flooring and

jointed with color cement slurry including finis ed

with flush pointing & cleaning the

surfaceetc.complete for anti skit(SOR2021-

P & L 24"x24" vitrified 8mm thick tile flooring over

20mm (average) base of cement mortar

1:6(1cement:6coarsesand) on new surface or

fixing on existing flooring by adhesive material

31 45.00 including dismentaling of existing flooring and 785.40 Smt

jointed with color cement slurry including finis ed

with flush pointing & cleaning the surfaceetc.(sor

Providing and Fixing pvc.Door (sintex door-

32 45.00 equivalent) with necessary alluminium fitting with 1617.00 Sq.M.

EL-7 section frame (Approved Rate as per ARC)

Providing & laying polish kota stone (25 mm th,)

Sandwich platform. Work incl. provdg good

quality & even shade polish kota stone of

33 8.00 required size having uniform thickness. Work 850.00 Smt

also incl. providing nece. Dismentling of brick

work for making jari to support the etc.comp.(app

P/F glass of 4 mm thik for vent lowers and

34 3.00 window with wooden border patti as per 150.00 No

instruction of eng. In chage.(app.rate)

Making hole in brick wall & all damaged work

shall be well repaired as per inst. etc. comp

Provdg. & fixing rubber plug for sink or wash

36 1.00 basin. (SOR 2021-22 P.212,Item 19.43 No

Providing and fixing 30mm thick FACTORY

MADE SOLID BOTH SIDE PRELAM PANEL

PVC DOOR SHUTTER consisting of frame made

out of M.S. tubes of 19 gauge thickness and size

of 19mm x 19mm for stiles, top and bottom rails.

M.S. frame shall have a coat of steel primer of

approved makde and manufactures. M.S frame

covered with 5mm thick heat moulded prelim

PVC ‘C’ channel of siz 30mm thickness, 70 mm

width of which 50mm shall be flat and 20mm

shall be tapered in 45 degree Angle on either

side forming stiles, and 5mm thick, 95mm wide

pream PVC sheet out of which 75mm shall be flat

and 20mm shall be tapered in 45 degree on the

inner side ot form top and bottom rail and 115mm

wide prelim PVc sheet out of which 75nmm shall

37 0.00 be flat and 20mm shall be tapered on both side 2214.00 Smt

to form lock rail, Top, bottom and lock rails shall

be provided either side of the panel. 10mm (5mm

x 2) thick 20mm wide cross PVC sheet shall be

provided as gap insert for top rail and bottom

rails. Panelling of 5mm thck both side prelim sqm

2214.00 PVC sheet to be fitted in the M.S. frame

welded, sealed to the stiles and rails with 7mm

(5mm + 2 mm) thick x 15mm wide PVC sheet

beading on inner side, and joined togeth with

solvent cement adhesive. An additional 5mm

thick PVC strip of 20mm width is to be stuck on

the interior side of the ‘C” chanel using PVC

solvent adhesive etc. complete as per direction of

Engineering in charge, manufacture’s

specification and rawing.(SOR 2021-22 I.C no-

Providing and fixing approved standard brand

factory made PVC door FRAME of size 50 x

mm with a wall thickness of 5 mm made out of

extruded 5 mm rigid PVC foam sheet mitred

at corners and jointed with 2 Nos. of 150 mm

long brackets of 15 x 15 mm M.S.square tube

the vertical door profiles to be reinforced with

19 x 9 mm M.S.square tube of 19 guage, EPDM

38 10.00 rubber gasket weather seal to be provided 256.00 Rmt

through out the frame. The door frame to be

fixed to the wall using M.S.screws of 65/100

mm size etc.complete as per manufacturers

specifications and direction of Engineering in

charge incl. medium grade aluminium hardware

all octroi, tax charges etc.complete (SOR 2021-

Providing and fixing pre laminated PVC rigid

foam sheet manufactured by approved standard

brand wall paneling of thickness 5 mm stuck on

inner frame work of 35 mm wide strips of 5 mm

thick PVC rigid foam sheet. The strips should

have in their centre a groove of 6 mm width and

2 mm depth for sinking the head of the screw

39 0.00 used to fix the strips to the wall and should be 1350.00 Smt

placed vertically at equal intervals of 405 /

mm center to center. The PVC strips to be fixed

to the wall using 65 mm long M.S. screws

through the groove in the strip by using PVC

fasteners. the distance between two screws shall

not be more then 300 mm. A groove of 2 mm to

be left at the joint of two panels for aesthetic look.

Providing and fixing 35 mm th. Shutters for

doors windows & clearstory windows incl. wood

frames as specified 12 cm. x 7cm. size incl.

40 anodised alluminium fixtures and fastenings

including primer coat of approved quality and

two coats of oil paint etc. complete.(SOR.2021-

a 4.00 (I) Fully glazed 4248.06 Sq. M.

b 3.00 (II)Fully panelled 5042.98 Sq. M.

c 4.00 (III) Partly panelled & partly glazed. 4645.52 Sq. M.

Providing and laying white glazed tiles 6mm thick

in flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1-cement :

41 10.00 3-coarse sand ) finishing with flush pointing in 726.60 Smt

white cement.(SOR 2021-22P.157,Item

Providing And Laying Glazed Tiles 6 Mm

Thick In skirting risers of Steps and dedo 10Mm

Thick Cement plaster 1:3 (1Cement : 3Coarse

Sand)Finished With Flush Pointing In White

Cement slurry.(SOR 2021-22 PG NO-

Providing and laying Ceramic tiles 6mm thickin

flooring treads of steps and landing laid on abed

of 12mm thick cement mortar 1:3 (1-cement: 3-

coarse sand ) finishing with flush pointing inwhite

cement. (R&B SOR 21-22 Item Code 14009A

Providing and fixing rough cast wired glass 6 mm

thick bedded in putty and thick with wooden

44 beading including the cost of wooden beadings of

Indian teak wood and necessary cutting of glass.

1.00 (C) wired figured glass. 659.58 Smt

Supplying and fixing Nimbhada ladi 37 to 50 mm

thick for walk-way, covering the activity of

excavation, ramming, Laying on sand bedding as

45 5.00 per requirement to fix the Nibhada Stone in Line 236.61 Smt

& Level with cement pointing in cement mortar

1:2 etc complete as directed.

Labour work for fixing above or any interlocking

blocks/nimbhada on up to 50mm th sand

bedding,levelling,watering anf fixing. Rate incl.

46 20.00 average 30cm depth for excavation and or 69.64 Smt

filling,carting away debries/excavated material up

to 5 km and cleaning the site etc.comp. as

directed.I00194

Providing & Laying China Mosaic Flooring On

Terrace With 6Mm Th.White Or Coloured

Glazed Tiles Chips Of Mini.25 To 35Mm

Approved.Square Or Rectangular Shape & Fixing

It.Before Start The Work Remove All Existing

Flooring & Open Old Slab Surface With Wire

Brush & Fill Crack If Shown With Water Proof

Material.Than For Making Level Gps.Work

Done In Mini.45 To 50 Mm Th.& Fixing.China

47 200.00 Mosaic In Cm 1:3 With Neat Cement Slurry At 700.00 Smt

Top & Filling The Gap With White Or Colour

Cement With Finishing Smooth Surface &

Even Shade Incl.Cleaning Of All Dirt,Dust

& Other Foreign Matter.Rate Including For

Making Colour Patta,Round Vata With Fixing

Neccessary Water Spout Opening Gap

Etc.Comp.As Directed.(As per A.R.C)

Providing & fixing Approved Make Glass Mosaic

on Plastered surface.Glass mosaic shall be of

mm x 25 mm size & 4 mm thickness pasted on a

net / paper sheet.Glass mosaic pieces are

mounted uniformly on the net / paper

sheet.colour shade combinations.Rate includes

all material,Labour,Scaffolding etc.complete.(N.S

Providing cement vata (10cm. x 10 cm.

size)quarter round in cement mortar 1:1

includingneat cement finishing,watering etc.

complete.(R&B SOR 21-22 Item Code 17015)

Providing, supplying and fixing precast C.C.

blocks (M-20) edge kerb having size of 75 x

x 300 mm depth and as per design conveying it

to the site, jointing into C:M 1:3 and racking out

the joints incl. necessary excavation of asphalt,

soil etc..completed.- I00390

Conveyance charges of earth lime, murrum,

building rubbish, manure, garbage, sludge,

51 10.00 excavated rock, fly ash, aggregate of any kind 235.51 Cmt

etc. comp. upto 5 km lead. (Bldg.S.O.R. 2021-

Providing & Fixing M.S.Grill, Gate, Elevation

Element Of Decorative Pattern With

M.S.Channel, Flat, Medium Grade M.S.Pipe,

52 200.00 Square Or Round Bars With Round Heanded 91.00 Kg.

Bolts, Nuts, Or By Screw. Incl. Applying One

Coat Zinc Primer And Two Coat Of Oil Paint

Providing and fixing 18 gauge s.s.304 grade stair

53 0.00 railing as per design given and direction of 3875.00 Rmt.

P/L. fine dressed 15 to 20 mm. average thick

Dholpuri stone paving over Cement mortar 1:2

(1 Cement : 2 Sand ) Including filing joints

with cement mortar 1:3 and flush pointing

with coloured cement painting and finishing

as directed. I01425

Providing & Laying 18 mm thick Mirror polish

granite For flooring , counter , stair -riser , tread

skirting , dedo etc. machine cut or chiselled on

55 4.00 bed of cement mortar 1:1 pointing with neat 2672.00 Sq. M.

cement slurry incl. moulding etc. comp. as per

instruction of engineer in charge. (Bldg. s.o.r

Providing & Fixing 20 mm thick Mirror Polished

Decorative Granite Board with Computerised

56 3.00 Golden Letters Discription as per instructions of 4304.00 Sq.mt.

engg. in charge to M.S. frame structure for

Inaugaration & Public Handover Function

Providing & Fixing M.S.structure from square &

rectangular pipes,angles,flats,round etc.of

57 0.00 required size for above mentioned granite board 60.00 Kg.

of suitable size mentioned by engineer in

Removing and refixing old granite stone on walk

way of KLF and for planter opp workshop in KLF

removing granite stone and cleaning cement

58 0.00 mortar with grinder, hammer and takna, and 687.00 Smt

filling the joints with white cement and necessary

colour pigment as per instruction of eng. in

charge. ( As Per app rate.)

Provinding and fixing in perfect alignment

gypsum board false ceiling with all

material,labour,tools ,tackles,scaffolding and

equipment including providing and fixing

gypboard with onw coat of primer and two or

more coats of acrylic emulsion paint

Removing and refixing the existing M.S.Grill from

Brick work column and refixing the same with

new R.C.C casting column in line and

level,including repairing M.S Grill if required with

providing M.S hold fast etc as per site

condition.(as per R.A)

Providing & fixing 2.00 mm thick F.R.P. sheet of

good quality and standard make rate also

includes necessary fabrication structure in the

grid of 1'-6" x 1'-6" size usiung hollow pipe of size

3/4" x 3/4" , 2" x 1" & 1" x 1" rate also inclusive

61 0.00 necessary bending ,cutting and fabrication 1865.00 Smt

charges and priming coat and 2 coats of oil paint

of shade approved by engineer in-charge rate

also includes washer and silicon paste required

for fixing the sheet in good quality as

diredted.(As per ARC)

Carrying out plinth treatment to post

construction / exsiting structure by spraying

62 0.00 chenical solution for termite control treatment 69.93 Sq.mt

incl. labour and materials consistant with I.S.I

specification.(SOR 2021-22 PG NO-199,22007)

Carrying out timber treatment to all wood work

incl. drilling holes and spreying oil based

63 0.00 chenical solution on surface ot timbner work for 36.65 Smt

termite contorl including labour and materials etc.

comp (SOR 2021-22 PG NO-198,22005)

Provdg. & fixing 100 mm size P or S trap for

water closet squatting pan incl. jointing the trap

64 with the pan & soil pipe in cement mortar 1 :1

(cement : 1 fine sand) (SOR 2021-22 PG NO-

1.00 (A) Vitreous China : 207.90 No

Providing and fixing wsh down water closet

(Europeantype,W.C.Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement

65 2.00 Mortar1:1(1-Cement:1-finesand) (Sea land cover 919.80 Each

to be measured and paid for separately)

(A)vitreous China Pattern :(i) in white colour

Providing and fixing water closet squatting Pan

(Indian type W.C. Pan) size 580mm (Earthwork,

bed concrete, foot reste and trap to be measured

66 2.00 and paid for separately) (A) Vitreous China.(I) 617.40 Each

Long pattern = White colour(SOR 2021-22 PG

Providing and fixing washbasin with single hole

for pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making good

67 2.00 the same but excluding fittings.(A) Vitreous 933.45 No

China:(ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour.(SOR 2021-22

Provdg. & fixing C.P. Brass screw down bib taps

68 of following size (SOR 2021-22 PG NO-

a 10.00 (II) 20mm dia 248.85 No.

Providing & Fixing Angle Cock Of "Ess Ess"

Trend Series Or Equivalent Standard Make As

69 1.00 Approved By Engg.In Charge All Complete.(N.S.) 675.00 No.

Provdg. & Fixing Gun Metal Check Or

70 5.00 Nonruturn Full Wheel Valve. (A) 15 Mm 218.29 No.

Dia(SOR 2021-22 PG NO-211,23030A)

Supplying nece hardware, Fittngs etc.comp of

71 app.quality as under

1.00 (a)1/2 '' Half turn bib cock 150.00 No

(b)1/2 '' Gun metal check or non return full wheel

1.00 valve. 200.00 No

1.00 (c) 1/2 '' Piller tap 200.00 No

1.00 (d) 1/2 '' stop cock 92.00 No

1.00 (i) S.S. Jali 23.00 No

11.00 (j) S.S.Soap dish 48.00 No

1.00 (k) waste pipe 23.00 No

50.00 (l) PVC 1/2 '' Half turn bib cock 25.00 No

Provdg. & fixing ball cock of approved qaulity as

72 directed.(SOR 2021-22 PG NO-

(A) Copper metel.

0.00 (II) 50 mm dia 221.79 No.

0.00 (II) 50 mm dia 161.09 No.

Provdg. & Fixing Flat Back Large Urinal of

White/ color of "Cera" or " Hindware" incl. C.P.

73 0.00 Brass waste coupline , waste pipe, pvc 1850.00 No.

connection etc. Complete.( size 635 x395x420

Providing & Fixing Chromium Plated Brass

Flush Cock With Lever Of "Ess Ess" - Trend

74 0.00 Series Or Equivalent Make Incl.Fixing In Pipe 1800.00 No.

Etc.Comp.As Dir.Of Engg.In Charge.(N.S.) (1)

25 Mm Dia.I00117

Provdg. & fixing 600mm x 450 mm Bevelled

edge mirror of superior glass mounted of .6 mm

75 2.00 th. A.C. sheet or plywood sheet and fixed to 609.00 No.

wooden pluge with C.P. brass screws and

washers.(SOR 2021-22 PG NO-210,23024)

Provdg. & laying S.W. Gully trap with C.I. garting

brick masonry chamber & water tight C.I. cover

with frame of 300 mm x 300 mm size ( inside)

with standard weight.sqare mouth trap size

x100 mm P trap Bldg.s.o.r.2015-2016,it.

Provdg. And Fixing Cast Pvc/C.I.(Span)

Nahni Trap Of The Following Nominal

Diameter Of Self Clenising Design With C.I.

77 0.00 Scread Down Or Hinged Gratiing Incl. Cost Of 381.00 Each

Cutting & Making, Good The Walls And Floors

100 Mm Inlet And 50 Mm Outlet Etc.Comp.(SOR

Provdg. & fixing plastic seat & cover for wash

down water closet with C.P.brass hinges and

rubber buffers.(SOR 2021-22 PG NO-209,23017

2.00 (B) plastci seat & cover 340.37 Each

Provdg. & fixing 12.5 lit.PVC Flush tank with

79 2.00 nece.fixtures etc.comp as per site condition (R&B 1165.20 No.

Sor 21-22 I.C NO .M216+L025)

P/F Jet Spreay at Europeon WC Pan, incl nece.

lath connection, stop cock, and other fixing

80 2.00 material and labour as per inst. of engineer in 361.00 no

charge(R&B Sor 21-22 I.C NO .M738)

Construction Of Under Ground Tank With 23 Cm

Th.Masonary Wall In C.M.1:6

Incl.Excavation,Necessary 23 Cm

B.B.C.C.1:5:10 For Foundation And Providing

R.C.C.1:2:4 For Top & Bottom Slab Of 12 Mm

Th.And 7.5 Mm Th.R.C.C.Paradi On Face Of

Internal Side Of Periphary Of The Tank

Incl.Formwork T.M.T.Steel Reinforcement As

Per Given Design,Vibrating Curing & Mixing

Of Approved Water Proofing Material With

Every 50 Kg.Bag Of Cement,Inside Plaster In

C.M.1:3 And Vatta In C.M.1:1 Inside Tank,P&F

F.R.C.Frame Cover Of Size600 X 450 Mm,Fiber

Steps Etc.Comp.As Dire.(N.S.) I00149

Providing & Fixing Polytheline Over Head Tank

With Necessary Dia.Holes For Outlet,Inlet Over

82 1500.00 Flow And Washout Necessary Washer And 7.72 lit

Checkput Etc.Comp.(N.S.) I00105

Providing & Fixing Door closer-complete of

83 0.00 Approved make to wooden / Alluminium Doors as 480.00 No.

per direction of engg.in charge.(N.S.)

P & F app.quality for Conseal lock in Alu.door

84 0.00 .as per inst of engg in charge 300.00 No.

.etc.comp.(app.rate)

P & f app.quality for brass baby latch (door

85 0.00 stopper) as per inst of engg in charge .etc.comp 180.00 No.

Providing throating or plaster drip, grooves and

86 0.00 moulding to Wall , R.C.C. chajja and slab. 27.50 Rmt

Bldg.s.o.r.2021-2022,it. No.5.4.18 Ch-5 )

Providing & Fixing In Position Alluminium Doors

With Frame Using Approved Quality Anodised

Extruded Alluminium Section As Approved By

Engg.In Charge(Jindal Alluminium) (A)Frame

Sections 101.6x44.45 Mm(B)Shutter Bottom

Vertical & Top Section 83.5x44.45 (Wt.1.31

Kg/Mt.)(At 1.31Kg/Mt)(C)Shutter Bottom Section

87 8.00 At14.3x44.45 Mm At (1.37 Kg/Mt) Shutter 2900.00 Smt

Middle Section At 100x44.3 Wt.(1.37Kg/Mt)

Incl.Providing & Installing 5 Mm Thick Approved

Color Acrylic Sheet Of Standard Quality Fixed

With Glazing Chips On Upper Pannel &

Laminated Sheet On Lower Pannel

(Wtt.0.13 Kg/Rmt) Etc.Comp.As Direction Of

Engg.In Charge. (N.S.) I00134

Providing & Fixing In Position Alluminium

Window Sliding / Fix Type With Frame Using

Approved Anodised Extruded Alluminium

Section As Approved By Engg.In

Charge.(Jindal Alluminium) Units Equivalent (A)

Frame Sections 65 X 25 Mm (At 0.41kg/Mt) (B)

Sliding Frame Bottom Section Of 61.85 X31.75

Mm (At 0.41 Kg/Rmt) (C) Shutter Top &

Bottom Section 40 X 18 Mm (Wt.0.41 Kg/Rmt)

(D) Shutter Interlock Vertical Section 10 X18

Mm.(0.41 Kg/Rmt) (E) Shutter Vertical Of

X 18 Mm (0.41 Kg/Rmt) Including P/F Installing

5 Mm Thick Approved Color Acrylic Sheet

Of Standard Quality Etc.Comp.(N.S.)

Providing & Fixing In Position Alluminium Vents

With Frame Using Approved Anodised

Extruded Alluminium Section As Approved By

Engg.In Charge.(Jindal Alluminium) Units

89 0.00 Equivalent (Approved Rate) Frame Section Of 1950.00 Smt

63.50 X 38.50Mm (Wt.0.68 Kg/Rmt)

Incl.Providing & Installing 5 Mm Thick Approved

Color Acrylic Sheet Of Standard Quality

Etc.Comp. I00136

Providing and fixing in position collapsible steel

shutters with vertical channels 20x10x2 mm

braced with flat iron diagonals 20x5 mm size with

top & bottom rails of T-iron 40x40x6 mm with

mm dia. Steel pulleys complete with bolts , nuts

90 0.00 locking arrangement , stoppers , handles 3652.11 Sq. M.

including applying a priming coat of red lead

paint & two coats of enamel paint of selected

shade & approved make. ( Bldg.s.o.r.2021-

Providing corrugated 0.80 mm (22 gauge) thick

G.I. sheets roofing fixed with galvanized iron ‘J’

or ‘L’ hook bolts, and nuts 8 mm. dia with

91 0.00 bitumen and G.I. limpet washers filled with white 793.10 Sq.M.

lead complete excluding the cost of purlines,

rafters and trusses..(SOR 2021-22 PG NO-

Providing valleys 900mm overall in plain 1.6mm

thick G.I. sheet fixed with G.I. J or L Hooks, Bolts

92 0.00 and nuts glavanised iron J or L Hooks Bolts and 966.00 Sq.mt.

nuts 8mm dia G.I. Limpet and bitumen washers

complete.(SOR 2021-22 PG NO-163,15003A)

Providing and fixing rolling shutters of approved

make made of 80 mm wide M.S.laths interlocked

together through their entier length & joinned

together at the enda by & locks mounted on

specially design pipe shaft with bracket plates

93 giudes channel & arrangement for inside & out

side locking with push pull operation incl. the the

hood cover & spring etc. including priming , oil

painting etc complete.(SOR 2021-22 PG NO-

0.00 (A) Shutters having width below 3.5 meter 3720.00 Sq.M.

Provdg. & fixing UPVC handle valve of

94 Prince,Supreme , Astral, finolex or equivalent

make as per dir. Of engg. In charge.

Provdg. And fixing to wall ,ceiling and floor

kg. F/Sq.Cm working pressure polythelene pipes

of the following outside diameter, low, density,

95 complete with special flange compression type

fittings, wall clips etc. making good wall ceiling

and floor. (SOR 2021-22, I.C NO-23004A TO

a 0.00 20mm dia 52.08 Rmt

b 0.00 25mm dia 66.99 Rmt

P/F. To Wall Ceiling And Floor 10.0 Kgf/Cm2

Working Pressure Pvc Pipes Of The Following

96 Outside Dia Complete With Special Flange

Type Fittings,Wall Clamps Incl. All Necessary

Fittings Etc. Complete. (At Any Floor Level)

c 20.00 32mm dia 77.60 Rmt

d 20.00 40mm dia 82.95 Rmt

e 20.00 50mm dia 110.25 Rmt

f 20.00 75mm dia 186.90 Rmt

g 20.00 110 mm dia 333.90 Rmt

Provdg. And fixing to wall, ceiling & floor in true

line and level UPVC pipe Schedule- 40 of Prince

, Supreme , astral , finolex or equivalent make as

approved by engg. incharge. pipe shall be fix on

wall with the help of clamp at every twi meter

center to center of shall be concealed as directed

97 in cluding neccesarry fitting etc. in cluding testing

of pipe and jointd and fixing the same with

adhesive solvent , including cost of all materials

of following nominal bore Bldg.s.o.r.2021-22,it

Providing & Laying & Jointing glazed stoneware

pipes incl. excavation up to 2.0 mt.,refilling,

trasporting the pipe to work site, unloading,

lowering in trenches, laying and jointing the pipes

in c.m. 1:1 incl. all jointing materials such as

cement, sand, hemp, bitumen as dire. testing the

98 pipe line to a head of 1.5 mt. and hydraulic test

as dire incl. watering trenches, spreading , and

carting away of surplus earth within 100 mt.lead

as dire. etc. comp.Bldg.s.o.r.2021-2022, item

code 24001AA, 24001BA, it. No.24.1 Ch- 24)

c 10.00 100 mm dia 140.70 Rmt

d 10.00 150 mm dia. 192.15 Rmt

Supply of Graout Material for Paving work in

99 0.00 KLF & work carry out as per Instructed by 130.00 Kg.

engineer Incharge.(Market Rate) I01430

P/F. to wall ceiling and floor galvanized mild steel

tubes (Medium grade) of the following nominal

dia. with all tube fittings and clamps incl. making

good the wall, ceiling and floor. (At any floor

level) (Bldg.Sor 2015-16,23.2,23001 a to

Providing & Fixing 5 mm Thick Mirror in Diff.

Toilet Block Unit in Kankaria Lake Front with S.S

Studds & also Removing Existing Break Mirror

etc comp as Directed (Market Rate)

Providing & Fixing 15 Cm Wide Chicken Mesh

Jali With Nails & Then Application Of 15 Mm

Plaster On R.C.C.& Masonary Joints As Per

Dir.Of Engg.In Charge (N.S.) I00095

Providing and laying (To level or slopes) and

jointing reinforced concrete light duty Non-

pressure pipes I.S ClassNP2 of the following

internal diameter with collars and butt ends

prepared for collar joints including testing of

joints complete. AMC Drainage SOR

0.00 300 mm dia 392.00 rmt

0.00 450 mm dia 704.00 rmt

0.00 600 mm dia 941.00 rmt

Constructing chamber of following size including

excavation, refilling, BBCC (1:5:10) for

foundation, C.C. channel (1:2:4), finished 15 mm

thick cement plaster inside in CM 1:3 finishing

with cement slurry, Brick masonry in CM 1:5 &

excluding the cost of chamber seat cover

etc.completed. AMC Drainage SOR 2016 it.

(A) 0.60 X 0.45 mt. size Inside Clear, Depth from

a 0.00 0.0 to 0.90meter for pipe dia <=150mm. 2262.00 No.

0.75 X 0.75 mt. size (Inside Clear) Depth from

0.00 0.0 to 1.20 meter for pipe dia <=20 mm 3905.00 No.

Constructing Slab Type M.H. Chamber Of The

Following Size Including Excavation, Refilling,

Brick Bats Cement Concrete (1:5:10) of thickness

15 C.M., CC Channel (1:2:4) of thickness

C.M., finished 15 mm thick cement plaster inside

& outside (Only for shaft) In Cm 1:3, Finishing

With Cement Slurry, P/F 4 Mm Dia M.S.Steel

Hdpe Coated Steps 35 Cm C/C At 35 Cm

Staggered Masonary In Cm 1:5, Rcc Slab In

Cc1:1.5:3 of thickness 15 C.M.,Including

Cantering & Reinforcement (Single jalli at

C.M. c/c bothway 10 mm dia.)But Excluding The

Cost Of Manhole Seat Cover Etc..Completed Of

Size 0.75 X 1.00 Meter (Inside Clear, M.H. length

should be parallel to the flow) (AMC Drainage

1.00 to 2.00 meter depth, (Slab at Ground level)

(for pipe dia <=230 mm)

CatchPit Jali Fixing P/F FRC catch pit jali with

106 0.00 600mm x 600mm clear opening etc. comp.. As 1384.00 No.

directed by engineer in charge.AMC Drainage

Carting and Fixing M.H., Chamber or Catchpite

Seat and Cover in line and level to match

exisisting road level in C.C. 1:2:4 and finishing

107 0.00 smooth, watering and protecting for 7 days etc. 750.00 No.

complete as directed. M.H. seat cover will be

supplied byA.M.C.(from any store) AMC

Making connection to the ex.M.H.in running

sewer incl.Dewatering and other required

machinery etc. of following dia pipes at any

convenient time. All damaged work shall be well

repaired as per instructions. etc..complete. (AMC

Drainage SOR 2016)

0.00 a. 150 mm to 300 mm dia. 1340.00 no

0.00 b. 400 mm to 600 mm dia. 2232.00 no

0.00 c. 700 mm to 900 mm dia. 3125.00 no

Repairing damaged M.H. and rasing M.H. up to

road level incl. removing damaged brick work

and repairing by brick masonry in C.M. 1:5 and

109 plaster in C.M. 1:3 and fixing C.I. steps and

existing MH sheet cover, removing the debris

from MH and carting the same as directed.AMC

Drainage SOR 2016 it. no.21

0.00 (A) up to 0.15 mt. (@ Two Coarse) 732.00 No

0.00 (B) up to 0.35mt. (@ Four Coarse) 1161.00 No

0.00 (C) up to 0.65 mt. (@ Seven Coarse) 1795.00 No

0.00 (D) up to 0.90 mt. (@ Ten Coarse ) 2161.00 No

Providing and fixing C.I. Manhole cover

110 0.00 M. x 0.45M. size having weight not less than 1119.45 No

35Kg. (R&B SOR 21-22,ITEM CODE NO-23038)

Providing F.R.C. MH seat cover incl. carting to

111 the work site etc. comp. Directed. AMC Drainage

SOR 2016 it. no.23

(B) Frc Medium Duty Cover Size 670 Mm Dia &

70Mm Thick 10 M.T. Load Design And Frame

Size560 Mm Clear Opening Outer Size 780 X

(C) Frc Medium Duty Chamber Seat Cover (Frc)

Cover 706 X 556 X 50 Mm Rectangular Cover

Frame Size 600 X 450 Mm Clear Opening Outer

Size 816 X 666 X 100 Mm

Repairing damaged I.C./ Raising removing

damaged brick work and repairing by brick

masonry in C.M. 1:5 and plaster in C.M. 1:3 and

112 0.00 fixing C.I. steps and existing chamber sheet 402.00 no

cover, removing the debris from chamber and

carting the same as directed. AMC Drainage

SOR 2016 it. no.22

Providing Dead Cantering using good quality

Country Wood Planks, wall Plate of required

thickness and size including placing the nece.

supports of reqd. size, nailing, fixing with mortar,

levelling. All specification for dead centring as per

standard engg. practice etc. comp. as directed.

Providing & Supplying JCB Machine on rental

basis in case of emergency situation and break

down type work & also during unavoidable

condition as per instruction of engg.incharge

rate includes all nece. shifting, fuel and operating

114 0.00 charges and stacking of useful & non-useful 536.00 hour

materials separately up to store. (No payment

should be allowed for non working condition of

machinery and for pipe line excavation and laying

work) ( Based on Previously approved rate by C

Supplying Pneumatic Breaker Machine for RCC

Slab or Asphalt Demolishing Work on site by

using Operator, fuel, power Supply etc. Complete

as Directed. (No payment should be allowed for

non working condition of machinery and for pipe

line excavation and M.H. work. Allowed only for

break down work) ( Based on Previously

approved rate by C E sir )

Providing and laying red mandana stone as wall

coping, in tread and riser of steps, dado, pillar,

seating etc laid on 10 mm thick cement mortar

116 1:3 (1 cement : 3 coarse sand) and joined with

matching shade, pigmented cement slurry

including rubbing and polishing complete.

Including making of grooves(NonS.O.R.)

0.00 (A) 25 to 30mm thick 1200.00 smt

Supplying Mazdoor for misc. work like

Restetment Pavment, excavation, refilling,

demolishion,levelling work & other miscellanous

work.I00948 (app rate in e-module)

Supplying carpenter for repairing doors with nece

material like stopper, hinges, handle, glass etc

comp. as per instruction of Engineer in charge

etc. I03725 As per Market Rate

Providing fiiter for D.I./P.V.C./C.I./M./A.C.

Pressure water pipe linmaintenance work with

necessary manpower, tools, plants, and

equipments, and any other works required for

AMC as per instruction of Engineer in charge etc.

complete. I03723 As per Market Rate

Providing and fixing 1.20 Metre high fencing with

2.0 Metre long M.S. Angle posts 40mm x 40 mm

x6 mm and oil painting 3 coats fixed at

Mt,C/c. with five Horizontan lines and two

diagonals of galvanised steel barbed wire

120 0.00 weighting 9.38 Kg. per 100 Metre, strained and 320.25 Rmt

fixed to posts with G.I,staples including fixing the

postsin ground with 0.5 M x 0.5.M x 0.5 M. block

in C.C1:5:10 etc comple(SOR 2021-22 PG NO-

Providing & fixing fencing with M.S angle

posts 40mm x 40mm x 6mm an oil painting

3 coat fixed at 3 Mt C/C with five Horizontal

lines and two diagonals of galvanized steel

barbed wire weighing 9.38 kg.per 100 meter,

stained fixed toposts G.I Sptaples, including

fixing the posts in column of compound wall etc.

complete. I00832 wire fencing

Providing, supplying of good quality

chharu(made of brick) and spreading on track of

garden, as directed. Chharu should be made of

good quality bricks, it should be red in

colour, free from coal''s dust. There should

not be broken stone, brocken bricks, grass,

garbedge, in chharu. Item also incl. spreading

of chharu with necessary watering and properly

consolidation with kuba. or as direceted by

engg. incharge etc compl.I01393

Labour charges for cleaning Under Ground &

Over head tanks by modern science technology

with six stage process etc without charging

123 0.00 any extra cost. The complete tank cleaning by 0.03 lit

mono cleaning systems comp. as directed.

(Approved rate- With reference to Approved

rate in SOUTH Zone) I00898

Supplying of Pavadi tractor with driver having

cultivator and pavadi arragements to roads to

remove deposited earth as per given inst. Of

engineer in charge.I00802

Providing and fixing stoper (M.S.) 6 inch with

necessary fiting in wooden door including

removel of old fiting if any etc completed as

directed. I00870 6 inch

Providing and fixing Aldrop 10 mm size (M.S.)

with necessary fiting in wooden door including

removel of old fiting if any etc completed as

directed. I00872 Aldrop 10mm

Providing and fixing handle (M.S.) 4 inch size in

with necessary fitting in wooden windows

including removal of old fitting if any etc

completed as directed.I00873

Providing and fixing stopper (aluminium) 6 inch

with necessary fiting in wooden door including

removel of old fitting if any etc completed as

directed. I00890 6 inch

Providing and fixing Aldrop 10 mm size

(aluminium) with necessary fiting in wooden door

including removel of old fiting if any etc

completed as directed I00891

Providing and fixing handle (aluminium) 6 inch

size in with necessary fitting in wooden door

including removal of old fitting if any etc

completed as directed.I00889

Removing any kind of pavement incl stacking of

131 0.00 serviceble material disposal of unserviceble 14.00 Smt

material with 50 meter lead and lift.I00216

Reparing of existing Aluminium

window/door/partition by making necessary

addition/alteration in same sides. Rate incl of

necessary fittings required and all labour

included. If necessary rate also incl. of removing

from position and refixing it at same place after

repairing it, etc comp. as directed. Sub Desc : As

per approved rate of AMC MET work I01334

Providing Scaffolding for Demolation , Plaster

work & painting work by "H" Frame Stand of by

any means like bamboo, valli etc. inluding carting

133 0.00 material work site and removing after compltion 40.00 Smt

of work. Rate include any type rent etc complet

for any height as directerd by engg.

incharge.I00899

Rapairing Of Door & Window (Steel).It Also

Including Labour Charges For Erection And

134 20.00 Fixing Door Shutter & Frame Etc.And 150.00 No.

Necessary Repair As Per Site Condition.(N.S.)

Rapairing Of Door & Window (Wood).It Also

Including Labour Charges For Erection And

135 20.00 Fixing Door Shutter & Frame Etc.And 100.00 No.

Necessary Repair As Per Site Condition.(N.S.)

Repairing of Doors/Windows shutters and

Frames including refixing-aligning shutter,

136 20.00 providing, replacing, fixing MS hinges, Aluminium 250.00 Smt

aldrops, stoppers, tadi etc. complete excluding

painting as per specifications.(app.rate)

Providing and Laying of Rubber Moulded Paver

Block Grey/Coloured 60 mm thick, M-35 Grade of

any size ; shape (Usually Uni-Paver Blocks)

using black trap good quality aggragate of

mm nominal size for footpath, parking areas,

service lanes and other areas as mentioned in

the drawing / instruction of engineer in charge.

Cost includes formworks using rubber mould,

Rate providing and laying paver blocks as per

required grading and specification. The paver

block shall be mechanically compacted. The

137 30.00 work of paving blocks shall be executed in line 501.60 SMT

and level by skill mason of flooring work only. It

should be laid in such a way that the no cutting of

the paver block to be necessary. if cutting of

paver block necessary then it should be cut by

machine only and carting. The finished surface of

the paver block shall have resonably good, plain

finished. Paver blocks shall be compacted and

shall be relaid if necessary. Gravel or such type

of materials shall not be allowed for production.

Laying on 5 cms thick sand bedding (As per

Road Approved rate)

Providing Special Superior Quality Of

Approved Shape And Size Pre-Cast M20

Cement Concrete Interlocking Blocks Of

138 0.00 60mm Th. Hydraulically Pressed In Machine Of 262.00 Smt

Single Nature Cement Color For Paving In

Flooring,Footpath Paving,Any Site With In Amc

Limit(As per ARC) I00435

Providing and laying white/coloured ceramic tiles

of 1st quality of specified size colour shade and

of approved make.(450x450)in cladding with bal

adhesive on and including bedding .coat of

plaster in cement mortar (1:4) all joints filled with

coloured / white cement putty as per architect

detail and wiped to give shape joint with flush

pointing and washed clean with acid as direction

by e.i.c (rate including fixing of tile in dedo with

bal or approved make adhesive)

Supplying Mistry for misc. work like Restetment

Pavment, excavation, refilling, demolishion,

kankaria lake front as per instruction of Engineer

in charge etc I00949

Supplying and Spreading good quality coarse

sand free from Impurities including Transporation

to Site and labour cost for Spreading etc. Comp.

Supplying Good Quality Bricks of Standard Size

for routine maintainance work - I00689

Pointing on Uncoursed stone masonry with

143 0.00 cement mortar1:3(1-cement:3-coarsesand) 63.50 smt

(A)Flushpointing

Providing and laying epoxy grout of Bal Endura,

144 0.00 laticrete or equivalent make for filling in groove 183.00 smt

etc comp. as directed. (App. Rate)

White / Colour washing with lime on undecorated

wall surfaces (two coats) to give an even shade

including thoroughly brooming the surface to

remove all dirt, dust mortar drops and other

foreign matter.( Building SOR - 2021-22 Ch-18,

Item No.18.11, Page no.174)

White washing with lime on wall surfaces (one

coats) to give an even shade including

thoroughly brooming the surface to remove all

dirt,dust,mortar drops & other foreignmatter.(

Building SOR - 2021-22 Ch-18, Item No.18.12,

Finishing Wall With Apex Ultima Acrylic Paint Of "

Asian Paint " Or Equivalent On Wall

Surfaces (Two Coats) To Give Required

Even Shade After Application Of Exterior Primer

Of Approved Brand & Manufactures After

Thoroughly Brushing The Surface To Remove

All Dirt & Remains Of Loose Powered

Materials.(N.S.) - I00099

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

148 300.00 including throughly brushing the surface free 52.29 Smt

from mortar droppings and other foreign matter

and sand papered smooth..(SOR 2021-22 PG

Extra over item 123 for every subsequent coat of

149 0.00 wall painting with plastic emulsion pain of 22.26 Smt

approved brand.(18032)

Extra over item 123 for painting with plastic

150 0.00 emulsion paint of approved brand on ceilings and 3.57 Smt

sloping roofs.(18032)

Painting two coats (excluding priming coat) on

new steel and other metal surface with enamel

paint, brushing, interior to give an even shade

151 0.00 including cleaning the surface an even shade 57.96 smt

including cleanicn the surface of all dirt, dust and

other foreign matter.(SOR 2021-22 PG NO.-178

Scraping oil paint from steel and other metal

surface and making the surface even (with Hand

Scraping.) (Building SOR - 2015-16 Ch-20, Item

Painting one coats (excl. priming coat) on

peviously painted steel & other Metal surfacer

with enamel paint, brushing, interior to give an

153 300.00 even shade incl. cleaning the surface of all dirt, 36.23 Smt

dust and other foreign matter..( Building SOR -

2021-22 Ch-19, Item No.19.11 Page no.178 item

Extra ove ritem 5 and 6 for every sub sequent

coat of paint. Item code

Painting two coats (excluding priming coat) on

new wood and wood based surface with enamel

paint, interior to give an even shade including

155 50.00 cleaning the surface of all dirt, dust and other 58.07 smt

foreign matter sand papering and stopping.(SOR

Painting one coats (excluding priming coat) on

previously painted wood and wood based surface

with enamel paint, to give an even shade

including cleaning the of all dirt, dust and other

foreign matter.(SOR 2021-22 PG NO.-180

Extra ove ritem 8 and 9 for every sub sequent

coat of paint. Item code

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to give

an required shape even shade after thoroughly

158 70.00 brushing the surface to remove all dirt, and 75.60 Smt

remains of loose powdered materials.etc

complete(SOR 2021-22 PG NO.-182 19031)

Distempering with dry distemper of approved

brand & manufacture (twocoats) and of required

shade on wall surfaces to give an even shade

over & including priming coat of whiting after

thoroughly brooming the surface free from mortar

dropping & other foreign matter. ( Building SOR -

2021-22 Ch-18, Item No.18.38 Page no.175 item

Distempeing (Two coats) with oil bound

distemper of approved brand and manufacture

and of required shade on wall surfaces to give an

even shade, over and including a priming coat

with distemper primer of approved brand and

manufacture after thoroughly brushing the

surface free from mortar dropping and other

foreign matter and also including preparing the

surface even and sand papered smooth..(SOR

Extra over Item 120 for every subsequent coat of

161 50.00 approved brand and manufacture.(18024) 20.06 Smt

Extra over Item 120 for distempering with oil

162 25.00 bound washable distemper on celling and sloping 5.36 Smt

Removing dry or oil bound distemper by a

washing and scraping and sand papering the wall

163 300.00 surface smooth including necessary repairs to 7.46 Smt

scratches complete.(SOR 2021-22 PG NO.-175

Extra over item 118 for removing dry oil bound

164 200.00 distemper on ceilings and sloping roofs.(SOR 1.05 Smt

Providing Scaffolding for Demolation , Plaster

work & painting work by "H" Frame Stand of by

any means like bamboo, valli etc. inluding carting

165 0.00 material work site and removing after compltion 40.00 Smt

of work. Rate include any type rent etc complet

for any height as directerd by engg.

incharge.I00899 (App Rate)

Arrangement of zula with two or nece. skilled

labour for repairing & maintenance work out side

building work etc.complete as per insructer

incharge(At any floor level) (App Rate)

Applying two coats of Birla (white cement based)

or Asian (acrylic lapy- putty) or equivalent & two

coats of primer of approved brand and

manufacture on new wall surface to give an even

167 100.00 shade including thoroughly brushing the surface 47.41 Smt

free from mortar dropping and other foreign

matter and sand papered smooth.(SOR 2021-22

Providing and fixing Polycarbonate roof Lexan

sabic 10 mm th.sheets of approved make, on

structural roofing / sky ligh structures in shapes

168 0.00 as per Architect’s drawing. The rate shall include 2345.60 Smt

cost of scaffolding, screws, nuts, bolts and all

necessary fixtures and fastening etc complete

(Rate excluded structural steel work)

ACP CLADDING - Providing and Fixing

Alluminium Composite Panel of (approved make

by Architect) 4mm thick exterior grade PVDF with

coil thick of 0.25 mm & frame work made out

from Alluminium anodised section of size 50 x

mm ( w app = 0.57 kg/m) having weight of 2.6 kg

for 15' supported on Masonary/ RCC with the

help of MS Bracket fixed with Brick Fastner/

Anchor Fastner and groove filled with

weather fillent of bowl corning corporation make

etc. complete as per Architect dwg. and as per

instruction of E.I.C.

Provinding & fixing with Polymac mecrolone Poly

carbonate sheet 6 mm thick sheet with Garwale

green glass film & joint filling by Astral

silicon.Rate also includes carpenter & skilled

hepler at kids city walk way ramp shade.... as

directed by engg.in charge etc.(App.rate)

Providing and fixing frameless glass window

using laminated glass sheet made by two glass

sheets joined with 1.54 mm PVB laminationsheet

sandwiched in between them with approved

fixing attachments, making necessary holes,

anchor fasteners, edge grinding, gaskets and

sealing the edges with silicon sealant

complete.(NonS.O.R.)

0.00 (A) 12 mm thick toughened glass on both sides 7490.00 Smt.

0.00 (B) 8 mm thick toughened glass on both sides 5145.00 Smt.

Hiring and operating the 20 KV 3 Phase Electric

Generator for operating desilting machinery, and

lighting and other requirements with Arranging

172 0.00 diesel to run the D.G. Set Do As Directed. 8 Hrs 2500.00 Shift

Shift. (No payment should be allowed for non

working condition of machinery ) AMC Drainage

Providing and applying texture paint at approved

quality, colour scheme, including preparation of

surface, primer 2 coats+2 coats of putty and

173 0.00 texture paint, as per manufacture's specification, 495.00 Smt

scaffolding, roller finish etc complete as per

instruction of engineer in charge (As per RA)

Providing and fixing Aluminum Composite Panel

signages of various size and in any language.

The 2 mm thick Aluminum composite panel shall Sq.

be cladded with retro reflective high intensity Inches

grade radium sheets. The signages shall be of

175 0.00 all section partion work including partition , door,

window,vents, etc.as dir. by EIC as per standard 3000.00 Smt

sections lead & lift all floors - anodised min.15

micron any floor as dir.

176 0.00 Proving & Fixing 3 mm Th. Acrylic sheet as dir. 970.26 Smt

Contractor’s Quoted Rate

IN FIGURE IN WORDS

Net Quoted Tender Amount Rs.

Seal and Signature of the Bidder Additional City Engineer

mobile no. (South Zone)

AHMEDABAD MUNICIPAL CORPORATION

"South Zone Office", Opp. Fire Station, Rambaug, Maninagar, Ahmedabad - 380

1 Name of work ઈ રુ વોડમાં આવેલ િસ.ટ .એમ નેશીયમ તથા વીમ ગ ુ તેમજ

2 Time Limit 12 Months

3 Tender Validity Period 120 days from the date of submission of the tender

4 Eligibility Criteria Register “E2” class in PWD in Govt. R&B/CPWD/AMC

orequivalent registration with any other state Govt. or institutions.

5 Estimated Cost put to Rs.14,99,999/-

6 Earnest Money Deposit Rs.14,999/- Demand Draft Or Bank Guarantee in favour of

Municipal Commissioner, Ahmedabad to be submitted as prescribed

7 Security Deposit 5 % of the Tender Amount in form of Bank Guarantee / Demand

Draft in favour of Municipal Commissioner, Ahmedabad to be

submitted as prescribed in tender.

8 Tender fees Rs.900.00 Demand Draft in favour of Municipal Commissioner,

(Non refundable) Ahmedabad)

9 Submission of EMD and In separate sealed cover each for EMD and Tender Fees along with

Tender Fees Tender as described in the invitation of tender and submitted to

Assistant Manager(South zone), South zone office, Rambaug,

Maninagar Ahmedabad.

10 Tenders issue date Tenders from the amc.nprocure.com website shall be downloaded

from AS PER TENDER NOTICE INVITED

11 Last date of receiving As per Notice inviting Tender / Addendum / Corrigendum.The

Tenders. tenders received after latest schedule date and time will not be

entertained under any circumstances.

12 Date of Opening As per Notice inviting Tender / Addendum / Corrigendum to

Assistant Manager / Dy.C.E.(S/Z) office, 2nd Floor, South Zone

Office, Opp. Fire Station, Maninagar, Ahmedabad-380008

13 Mode of sending the Document shall be submitted in sealed envelope systems By

TenderDocuments RPAD/Speed post/ Hand Delivery in sealed covers in Duplicate (

One Original & One Duplicate) duly sign & seal by contractor .

14 Terms, Condition, & All general condition of contract mentioned in tender shall be

Specification applicable.

15 Defect &Liability Period The contractor shall be responsible to make good and remedy at this

own exppence any defect which may developed or may be noticed

before the period mentioned here under from the certified date of

complition, The within 15 days of recipts of the notice. In the case

of failure on the part of the contractor, the Engineer incharge may

rectfy or remove or reexecute the work at the risk & cost of the

contractore. The Engineer incharge shall be entitled to appropriate

the whole or any part of the amount of securitydeposit towards

theexpences, If any, incurred by him in rectification, removal or re-

execution. The defect liability period shall be as under (a) for all

works costing up to Rs. 50,000 (amount put to tender), the period

shall be three months from the cirtified date of complition. (b) for

all workscosting more than Rs. 50,000 and upto Rs. 1 crore

(Amount put to tender) ,the period shall be six (6) month from the

cirtified date of compition or one monsoon , which ever letter.(c)

the major project costing more than Rs. 1 crore , the period shall be

12 months from the cirtified date of complition which should

include one monsoon.(d) For building works , the period specified

in (a) ,(b) & (c) above or elapse of monsoon period following

cirtifide date of complition.,whichever is letter . For the purpose of

deciding the monsoon period, the 30 september may be treated as

16 Compansation for Delay 10 % of the balance work after Time limit expired as Peta Work

17 Deduction of Retention Retention @ 2% of the value of work done will be deducted from

Money from each RA each RA bill. It will be released along with release of payment of

Bill Final Bill.

18 Addendum/Corrigendum Addendum/Corrigendum If any Shall be Published 48 Hrs. Price To

the Final Submission Time And Date. The Same Shall From a part

Of Tender And The Same As to be Attached Along With The

Tender Document.

19 For E.P.F. Act. As per Account department cicular no.37, date-09/08/2018

20 GST As per AMC Finance Department Circular No. 38 dated 21-11-

2022. The Rates are Exclusive of GST. Prevailing GST will be paid

 Conditional tenders will not be accepted in any case. Municipal Commissioner reserves the rights to reject any or

all the tenders without assigning any reasons thereof.

 The authorized signatory holding Power of Attorney shall only be the Digital Signatory. In case authorized

signatory holding Power of Attorney and Digital Signatory are not the same, the bid shall be considered non-

 In the event of the specified date of bid submission/opening being declared a holiday for the Employer, the bids shall be received

/opened on the next working day at the same place and the same time.

Seal and Signature of the Bidder Add.City.ENGINEER (South Zone)

Date: Ahmedabad Municipal Corporation

As per account department(A.M.C.) circular no. 03 Dt.28/04/2023 Bank guarantee of

said work must be of Ahmedabad city branch, which mentioned as bellow.

C. Guarantees issued by following banks will be accepted as SD/EMD on

permanent basis.

 All nationalized Banks

D. Guarantees issued by following banks will be accepted as SD/EMD for the

period up to March-31, 2024. The validity cut-off date in the GR is with respect

to the date of issue of Bank Guarantee irrespective of the date of termination of

Bank Guarantee.

1Commercial Banks :-

1. A U Small Finance Bank

3. City Union Bank

4. DBS Bank India Limited

6. Equitas Small Finance Bank

7. Federal Bank

10.IndusInd Bank

11.Kotak Mahindra Bank

12.Standard Chartered Bank

13.Tamilnadu Mercantile Bank

14.Bandhan Bank

18.Karnataka Bank

19.Krur Vysya Bank

20.South Indian Bank

21.Utkarsh Small Finance Bank

2 Co-operative and Rural Banks Of Gujarat :-

1. The Ahmedabad Mercantile Co-operative Bank Limited

2. Kalupur Commerical Co-operative Bank Limited

3. Nutan nagrik Sahakari Bank Limited

4. Rajkot Nagarik Sahakari Bank Limited

5. Saraswat Co-operative Bank

6. Saurashtra Gramin Bank

7. The Gujarat State Co-Operative Bank

8. The Mehsana Urban Co-operative Bank Limited

9. The Surat District Co-operative Bank

10.The Surat Peoples Co-operative Bank

11.SVC Co-operative Bank LTD.

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

General terms & conditions

1. A booklet of FORM B-1 of Gujarat State Roads & Building Department / Water Resources

Department with the latest correction slips may be referred for quality of construction &

standard of Procedure (SOP). (only English version)

2. In the specification “as directed" / "approved" shall be taken to mean "as directed /

"approved" by the Engineering in charge.

3. Wherever a reference to any Indian standard appears in the specifications, it shall be taken

to mean as reference to the latest edition of the same of force on the date of agreement.

4. In "Mode of measurement" in the specifications wherever a dispute arises in the absence of

specific mention for a particulars point / aspect, the same in the relevant Indian Standards

shall be referred to.

5. All measurement and computations, unless otherwise specified shall be carried out nearest

to the following limits :-

i) Length, width and depth, Height 0.01 Meter

ii) Areas 0.01 Sq.mts.

iii) Cubic contents 0.01 Cu. mts.

In recording dimensions of work, the sequence of length, width and height (Depth) or

thickness shall be followed.

6. Definite particulars covered in the items of work, though not mentioned or elucidate in its

specifications shall be deemed to be included therein.

7. Approval of the samples of various materials given by the Engineer in charge or AMC's

Consultant shall not absolve the contractor from the responsibility of replacing defective

materials brought on site or materials used in the work found defective at a later date. The

contractor shall have no claim to any payment or compensation whatsoever on account of

any such materials being rejected by the Engineer in charge.

8. The contractor’s rate for the item of work shall be for the work completed in all respect.

9. All materials including those of electrical shall be got approved by the Engineer in charge/

Architect before using them in the work.

10. Materials as and when rejected by the Engineer in charge or AMC's Consultant shall be

removed from the site of work within 24 hours.

11. All work shall be carried out in a manner applying the best technique.

12. All tools, templates, machinery and equipment for correct execution of the work as well as

for checking lines, levels, alignment of the works & all precautionary measures during

execution shall have to be kept in sufficient numbers and in good working condition at the

site of the work.

13. Special modes of the construction not adopted in general Engineering practice, if proposed

to be adopted by the contractor shall be considered only if the contractor provided

satisfactory evidence that such special mode of construction and completion of work to the

required strength and quality. Acceptance of the same by the Engineer in charge shall not

however, absolve the contractor from the responsibility of any adverse effect and

concordance of adopting the same in the course of exaction or completion of the work.

14. The contractor shall be responsible for observing the rules and regulation imposed under

the "Minor Mineral Act", and such other laws and rules prescribed by the Government

from time to time.

15. All necessary safety measures and precautions (incl. those laid down in the various relevant

Indian Standard) shall be taken to engrave the safety of men, materials and machinery on

the work and also of the work itself.

16. Quantity measured in the tender is approximate. It may increase or decrease looking to the

quantum of actual work for which no any claim shall be entertained by A.M.C.

17. Contractor shall have to execute extra item if required only after necessary permission from

18. The work in general shall be carried out as per standard specifications of the relevant items

to be executed & as per the instruction of Engineer in charge & as per the guidance of

AMC's Consultant for this project.

19. The general terms & conditions of the contract shall be applicable & shall be binding on

the contractor. The contract agreement shall have to be executed between AMC & the

agency to which work is awarded for execution.

20. The time limit shall be reckoned after next day from the date of issue of the written work

order to the contractor after fullfillng the formality life SD & Agreement. No time

extension will be granted under any circumstances.

21. In case of any ambiguity in specifications mentioned in this tender, the interpretation given

by Additional City Engineer /Dy.M.C of A.M.C. will be final and binding to the

22. The contractor shall take no advantage of any apparent error or omission in drawing or

specification and the Engineer -in-charge shall make such corrections and interpretations as

necessary to fulfill the intent of the plants and specifications.

23. The quantities of items in BOQ (Bill of Quantities) may vary in case of necessity arises.

24. All prevailing taxes/duties chargeable by State Govt./Central Govt. and the Municipal

Corporation. will be payable by the contractor.

25. No any kind of price rise / price escalation / price variation for cement , steel or labour shall

26. Contractor is requested to see the site physically before tendering. He is also requested to

quote the rates keeping in view of all the points mentioned in relevant pages of tender

27. Water Supply: The contractor shall arrange at his own cost, a suitable supply of piped

water for the construction of the works and provide a satisfactory supply of potable water

for drinking, washing, sanitation and cleaning down. The contractor will be responsible for

all the costs where applicable of connection, meter installation, water consumed, water

required for testing purposes, disconnection and the laying, maintenances and ultimate

removal of any distribution system around the site.

28. Electricity: Electric supply will be made available at the site by the Contractor and the

contractor must make his own arrangements with the Corporation and Electricity Supply

Authorities and with other contractors to connect and to take a supply from such services,

paying all costs in connection therewith.

The Contractor shall be entitled to use supply Electricity as may be available on the site for

purpose of the work and shall pay such charges as is fixed by the appropriate supply

In case there is any delay in supply of power site of any interruption or fault in the power

during the work. No compensation shall be paid for idle labor staff, machineries and for use

of diesel operating sets etc. as the case may be.

29. Tenders shall submit all the valid/certified documents in support of their initial/eligibility

criteria mentioned above along with the bid. They shall have also to submit the income tax

clearance certificate and solvency certificate.

30. No advance such as secured advance machinery advance, mobilization advance or

materials advance will be given.

31. The contractor shall get the electrical works executed through the authorized Government

approved licensed electrical person or firm in appropriate category in accordance to

contractual provisions.

32. The electrical works shall be carried out strictly in accordance with the directives issued by

Engineer in charge.

33. Contractors shall not have any dispute or claim for any kind of compensations

(i) If the quantity stipulated in the tender items varies or the scope of work changes &

thereby total amount of work increases/ decreases.

thereby total amount of work increases/ decreases.

(ii) If the work gets delayed/ postponed for some administrative/ technical decision

34. In case of any dispute, decision of Municipal Commissioner shall be final and binding on

the contractors.

35. Tenders which do not fulfill all or any of conditions or are submitted incomplete in any

respect will be rejected. Municipal Commissioner reserves the right to increase/decrease

the scope of work. No any claim to that effect shall be entertained. The Municipal

Commissioner also reserves the right to reject any or all the tenders without assigning any

reason thereof.

36. The contractors are requested to quote their rates considering above tender conditions.

37. The contractor shall have to paid balance Security Deposit within 15 days from the date if

issue of Letter of Interest (LOI). And after paying the balance S.D. the time limit will be

started & Execution of Agreement to be done than after.

In case of delay in paying balance S.D. by more than 15 days penalty at the rate of

0.01% of sanction tender amount per day will be deducted from the Bill.

Eventhough in special case, If work is not started because of monsoon or any other

special reason (like site is not available), after evaluation of situation the actual date of

starting of work will be consider after approval of Dy.M.C. (South zone)

38. The Contractor shall not claim for increase or decrease in the quantity of the item or the

39. The payment shall be made as per the A.M.C policy for the work done by the contractor.

40. Conditional tenderes will not be accepted.

41. The Contractor must be followed the rules and regulations for COVID-19 as per guidelines

published by WHO/ Center government/State government /Ahmadabad municipal

Signature of contractor with seal Additional City Engineer (S.Z)

Date Ahmedabad Municipal Corporation

FORM OF BANK GUARANTEE

(hereinafter called the Tenderer) is desirous and preferred to tender for works in accordance with

the terms and conditions of tender for the work of

1 .Therefore. We hereby affirm that -we are guarantors on behalf of the Tenderer up to

(in figures) and we undertake to pay to Municipal Commissioner, Ahmedabad MunicipalCorporation,

A'bad specified up to his first written demand, without demur without delay andwithout the necessity

of a previous of judicial or administrative procedures and without thenecessity to prove to the Bank

the defects or short comings or debits of the contractor any sumwithin the limit of

2. We further agree that the Guarantee herein contemned shall remain in full force and effectduring the

period that would be taken for the acceptance of tender.

However unless a demand of claim under this guarantee is made on its in writing on or before the

(Date to be specified will not he less than 180 days from the stipulated date of receiving the tender)we

shall be discharge form all liabilities under the guarantee thereafter.

3. We undertake not to revoke the guarantee during it currency except with the previous consentof the

Municipal Commissioner, Ahmedabad Municipal Corporation, A'bad in writing.

4. We lastly undertake not to revoke the guarantee for any charge in constitution of the Tendereror of

Date: Signature & Seal of Guarantor...........................

5. The contractors shall have to furnish income tax clearance certificate before his tender isaccepted

and intimate assessment number and ward under which he is assessed.

6. Copies of certificate as regards previous experience, if any, must accompany the tender.

Signature of Contractor Add.C.E (S.Z) Dy. Municipal Commissioner (S.Z)

Date Ahmedabad Municipal Corporation

TENDER DECLARATION FORM

The Deputy Municipal Commissioner,

South Zone, Ahemedabad

Name of Works:- ઈ રુ વોડમાં આવેલ િસ.ટ .એમ નેશીયમ તથા વીમ ગ ુ તેમજ

I/We the undersigned have carefully gone through and clearly understood the Tender documentsfor the above

work. I/We have satisfied myself/ourselves as to the location of site, examined drawings.I/We have visited site

& fully acquainted with local situations regarding materials, labours & others factorspertaining to work before

submitting tenders.

I/We do hereby offer to execute and complete the whole of the work within the time specified all in

accordance with the specification, designs, drawing and instruction in writing referred to in the saiddocument

and with such materials as are provided for, at the respective rates which I/we have quoted in theschedule-B or

at such other rates as maybe fixed under the provisions of these conditions.In the event of this tender being

accepted I/We agree to enter into an agreement and when required andexecute the contract, according to your

fom1 of agreement as or in default where of I/we bindmyself/ourselves to forfeit the "Earnest Money Deposit."

I/We understand that if I/WE shall not enter in agreement within ten days or decided by AMC fromthe

date of receipt of letter of acceptance, you will forfeit the earnest money paid by me/us and takenecessary action

I/We have enclosed a DEMAND DRAFT or PAY ORDER as an “Earnest Money Deposit", for thesum

as mentioned in tender notice, the full value of which is to be absolutely forfeited to the Employer IfI/We fail to

commence the work specified. Otherwise the said sum shall be retained, by the Employer as onaccount of such.

Security)' Deposit'.' as provided for in the aforesaid documents.

I/We agree not to employ sub-contractors other then those that may be approved in accordance

withConditions in the aforesaid documents.

I/We understand that you are not bound to accept the lowest or any tender which you may receive.

I/We am/are bound to execute the job if the work order is issued within 120 days from the date

ofopening of the tender.

I/We agree to pay the Government income-Tax, Sales-Tax (Central and State) ,Sales Tax on work,

octroiduties and other prevailing Government taxes/charges on such items on which the same are leviable and

therates quoted by me/us are inclusive of the same.

Yours faithfully

Signature of the contractor

ybœtJtœ BGþrlrmvj ftuvotuhuNl

œÂûtK Ítul - Esluh Ftðþ

1. mbgbgto>t ykdu yuj.ytu.ytR. ytÃgt ctœ 10 rœJm mw^ebtk sÁhe me¾gtuhexe rzvtuÍex Che ðgth ctœ&e dKJtbtkk ytJNu. <ubs

ðgth ctœ Jfo ytuzoh R~gw &gu&e mbtg bgtoœt NY &guje dKtNu.<&t <u mt&u fhthvºt fhJtltu hnuNu. ylu <u bwsc ftb NÁ fhJtle

<theF dKJtbtk ytJNu. yuj.ytu.ytR. ytÃgt ctœ me¾gtuhexe rzvtuÍex ChJtbtkk rœl -15 fh<tk J^w rJjkc ltk rfMmt btk <ubs Jfo

ytuzoh ytvu&e ftb NY fhJtbtkk rJjkc &gu&e «r<rœl bkswh xuLzh hfbltk 0.01 % juFu vulÕxe cej btk&e ftvJtbtk ytJNu. <ub A<tk

rJrNÐ rfMmt btk atubtmt ltk fthKu y&Jt yrlJtgo fthKtumh ftb NÁ &R Nfu <ub l ntug <u rfMmt btk gtuøg<t aftme zu.Bgw.frb©h

(œ.Ítul) le bkswhe bu¤Je ftb NÁ fhJtle <theF dKJtbtk ytJNu.

2. xuLzh Jujezexe 120 r>Jm Mþ^ele hnuNu.

3. xuLzh Ch<e JF<u yluoMxble ChJtle hnuNu.

4. S.yum.xe. «J<obtl œh «btKu yjd&e awfJJtbtk ytJNu. xuût fu yLg ftuE vK mhfthe fhJuht ChJtle sJtc>the ftuLx[tfxhle

5. htsg / fuL÷ mhfth©elt JF<tuJF<lt ftg>t Bþsc su ftuE hfble fvt< fhJtle &Nu <u bwsc ftuLx[tfxlt cejbtk&e fvt< fhJtbtk

6. juch JuÕVuh Vkz btxu ntjbtk htsg mhfth©eyu fhuj nwfb Bþsc 1% (yuf xft) hfb cejbtk&e ftve juJtbtk ytJNu.

7. bxehegj xuMxekdltu xuMxekdltu FhuFh &guj Fao ftuLx[tfxh©e vtmu &e Jmwj fhJtbtk ytJNu.

8. ftb ytv<e JF<u su <u ftuLx[tfxhLþk hSMx[uNl ægtlbtk htFelu <ule bgto>tbtk ftb ytvJtbtk ytJNu.

9. yt xuLzh su <u Jdolt btLg gtœe lt ftuLx[tfxhtu Che NfNu. dJobuLxlt btLg ftuLx[tfxhu y.BGþ.ftuvotu.btk btLg ftuLx[tfxhtu le gtœebtk

hSMxuNl fhtJJtLþk hnuNu.

10. yt Wvhtk< y.BGþ.ftuvotu. lt slhj ftuLx[ufx fLzeNl ylu xuLzhle Nh<tu ck^lf<ot hnuNu. su BGþrl.ftuvtuohuNl Juc mtEx

www.ahmedabadcity.gov.inWvh Bþfuj Au.

11. ftuLx[tfxh lu vubuLx - hl´dcej BGþrl.ftuvotu.lt su <u atÕþ mbglt mhfGþjh Bþsc fhJtbtk ytJNu.

12. Nh<e xuLzh MJefthJtbtk ytJNu lrn.

13. xuLzh MJefthÔþ, h> fhÔþ, ftulu ytvÔþ ylu fgt CtJ&e ytvÔþ <u ykdu zu.BGþrl.frbNlh©eltu rlKog ytFhe hnuNu.

14. >huf ytExbltk MvuNeVefuNl ftuvtuohuNlltk bkswh &guj MvuNeVefuNl Bþsc <&t RLzegl MxtLzzo ftuz ytuV «ufxem ltkk btLg ^tht

^tuhKtu Bþsc hnuNu ylu zu.mexe yuLSlegh©eltu rlKog ytFhe hnuNu. Jtuxh´d fhJtbtk lrn ytJu fu >hhtus J^thtltu zucheÍ

WvtzJtbtk lrn ytJu <tu ftuLx[tfxhltk Fauo ylu òuFbu Jdh ltuxemu Jtuxh´d fhtJJtbtk <&t zucheÍ WvtzJtbtk ytJNu ylu cejbtk&e

hfb ftve juJtbtk ytJNu.

15. yufe JF<u yuf fh<tk Jæþ søgtytuyu ftbNY fhJtltu Jfoytuzoh b¤u <tu ftb yuf mt&u s yuf s c<tJuj søgtyu fhJwk vzNu. yuf ftb

ÃþÁ &tg vAe cesw ftb NY fheyu <uÔþk atjNu lrn.

16. atÕþ ftbu ftuEvK mrJom jtEllu LþfNtl l &tg <u he<u ftb fhÔþk vzNu, òu ftuE mrJom jtEl lu LþfNtl &Nu <tu <ule mkÃËKo

sJtcœthe (òlbtjle) ftuLx[tfxhle vtu<tle hnuNu. mtEx vh ftb œhBgtl bswh fu sl<t lt ftuE btKmlt òlbtjlu lwfNtl &tg

<ule sJtcœthe ftuLx[tfxhle hnuNu. vtujem Vhegt>&tg <tu <ule sJtc>the vK ftuLx[tfxhle hnuNu. CuFz ^me l vzu <ule sJtc>the

vK vtujem Vhegt>btk ftuLx[tfxhle hnuNu. CuFz ^me l vzu <u btxu mjtb<elt vdjtk (suJt fu >tuhzwk ctk^e bsqh Ftztbtk W<thJt,

mtuh´d ylu Mx[x´d fhJt rJduhu) je^t Jdh bsqhlu Ftztbtk W<thNu <tu ftuLx[tfxh s vtujem Vhegt>btk sJtct>h hnuNu ylu

BGþrl.ftuvtuohuNlltu ftuEvK MxtV ytlt btxu sJtc>th hnuNu lrn. ytxÕþk mbSlu s xuLzh ChÔþk. Btswhtultu rJbtu vK W<thtJJtu.

17. juch yufx «btKu<ubs Bgw. frb§h©eltkk vrhvºt lkch 81 <t.26.02.2015bwsc <btb juch / bsqhtulwk dwsht< rcÕzekd yuLz

y^h fLMx[[fNl Jfombtkk VhSgt<hSMx[uNl fhtJJt ykdu ybj fhJtltu hnuNu <&t fuxjt juch jtJNtu <u vK sKtJJtLþk hnuNu.

juch yufx «btKu ftgoJtne lrn &E ntug <tu <u btxu ftuLx[tfxh mkÃËKovKu sJtc>th hnuNu. ylu <ulu vubuLx ytvJtbtk ytJNu lrn

<ubs ct¤ bswhtulu ftb Wvh htFe NftNu lrn.<ubs JF<tu JF< Bgw. frBNlh©e îtht fhJtbtkk ytJuj mh¾gwjhtule Nh<tu

ftuLx[[tfxhlu ckk^l f<to hnuNu.

18. ftuEvK ftgœtfeg jexeduNl ybœtJtœ Nnuhle ftuxobtk hnuNu.

19. ftuE fthKmh òu ftuLx[tfxhlu ftb l ytve Nftg <tu <u ykdu ftuLx[tfxh ftuEvK «fthltu LþfNtle- J¤<hltu n¬ >tJtu fhe NfNu lrn

fu ftg>tfeg ftgoJtne yt ykdu &E NfNu lrn. xuLzh bkswh &gtltu y&o ftb ytve s >uJtLþk Au <uJtu &E NfNu lrn.

20. ytuVh y&Jt xuLzhbtk œNtoJuj ytRxbltu sÚ&tu mkCrJ< sÚ&tu Au subt atjw ftb œhBgtl VuhVth &Jtle N¾g<t hnuje Au.

21. M&¤ vrhÂM&r< / sYhegt< Bþsc ftb fhtJ<t xuLzhbtk sKtJuj fJtuLxexebtk J^ Dx &Nu <tu <u ykdu ftuLx[tfxh îtht ftuEvK «fthle

J^thtle ltKtkfeg btkdKe fhe NfNu lrn. ylu ftb ytuAw &tg <tu ftuLx[tfxhle J¤<hle btkdKe MJefthJtbtk ytJNu lrn.

22. mtEx vh jtJJtbtk ytJuj btjmtbtl hesufx fhJtbtk ytJu <tu ðþhk< r>l-1btk vh< jE sJtltu hnuNu. yLg&t ftuvtuohuNl îtht <u

hesufx btjltu rlftj fhe >uJtbtk ytJNu ylu <ule LþfNtlele sJtc>the ftuLx[tfxhle hnuNu.

23. su ftuLx[tfxh vtmu bswhtultu rJbtu, ydtW&e W<htÔgtu ntug <ublu «t^tLg ytve ftb ytve NfNu.

24. bsqhtu fu htn>theytulu ftuEvK «fthltu yfMbt<&tg <tu <ule vtujem ftgoJtnele fu juch yufx bwscle ftgoJtnele sJtc>the

yb.BGþrl.ftuvtuo.lt fboatheytule ftuEvK he<u hnuNu lrn.btºt ftuLx[tfxh s yt btxu sJtc>th hnuNu. bswhtulu dbçËx, nuÕbux nt&ltk

btuò rJduhu ftuLx[tfxhu VhSgt< ytvJtltk hnuNu. bswhtu <&t MþvhJtEÍ fu Bþft>bltu rJbtu vK W<thJtltu VhSgt< hnuNu. juch

yufx Bþsc ltuk^Ke fhtJe <ult rlgbtuLþk vtjl fhJt ftuLx[tfxh ck^tguj hnNu. ct¤ bswhtu htFe NftNu lrn.

25. bsqhtu fu htn>theytulu ftuEvK «fthltu yfMbt<&tg <tu <ule vtujem ftgoJtnele fu juch yufx bwscle ftgoJtnele sJtc>the

yb.BGþrl.ftuvtuo.lt fboatheytule ftuEvK he<u hnuNu lrn.btºt ftuLx[tfxh s yt btxu sJtc>th hnuNu. bswhtulu dbçËx, nuÕbux nt&ltk

btuò rJduhu ftuLx[tfxhu VhSgt< ytvJtltk hnuNu. bswhtu <&t MþvhJtEÍ fu Bþft>bltu rJbtu vK W<thJtltu VhSgt< hnuNu. juch

yufx Bþsc ltuk^Ke fhtJe <ult rlgbtuLþk vtjl fhJt ftuLx[tfxh ck^tguj hnNu. ct¤ bswhtu htFe NftNu lrn.

26. rcÕz´d ftble ytExbtu btxu - slhj xuflefj MvuNeVefuNl ytuV rcÕz´d Jfomle çþf Bþsc yLþmhJtltk hnuNu. Mt>h ÃþM<eft

øþsht< çþf Mxtumo 20-ce, zeMx[ef Ntuv´d, mufxh-21, dtk^eldh&e b¤e hnuNu. su Juc mtEx

www.ahmedabadcity.gov.inWvh Bþfuj Au.

27. bxehegj fu ceò xuMx´d hevtuxo ftuLxtfxhu vtu<tlt Fauo ftuvotuhuNl sKtJu <u søgtyu fhtJJtlt hnuNu. yt ykdultu mkÃËKo Fao <&t

Bgwrl.MxtVlu juctuhuxhe Mþ^e <&t buLGþVufah´d søgt Mþ^e jtJJt -jE sJtltu Fao vK ftuLx[tfxhu CtudJJtltu hnuNu.

28. btj su <u Mxtumo Wvh y&Jt mtEx Wvh jtuftulu lz<h l &tg <u he<u MËalt Bþsc W<thJtltu <ubs dtuXJJtltu hnuNu.

29. òu BGþ.yuLSlegh´d MxtV sKtJu <tu ftuLx[tfxhu atÕþ ftbu mtEx Wvh zeÍexj fubuht&e ftb atÕþ &gt vnujt, atÕþ ftbu <&t ftb ÃËKo

&gtltk Vtuxtud{tVm BGþrl.yturVmbtk ytvJtltk hnuNu <u rmJtg ftbLþk vubuLx fhJtbtk ytJNu lrn òu MxtV MËalt ytvu <tu fubuhtbtk&e

ftuBÃGþxhbtk Vtuxt x[tLmVh fhe ytvJtlt hnuNu. yt ykdu ftuE vK J^thtltu Fao ytvJtbtk ytJNu lrn.

30. ftuEvK fthKmh xuLzh h> fhJtbtk ytJu <tu ftuLx[tfxh <u ykdu ftuEvK «fthltu n¬ >tJtu fu J¤<hle btkdKe fhe NfNu lrn. yt

Nh< MJeftgo ntug <ubKu s xuLzh ChÔþk.

31. bxehegÕm suJt fu hu<e, #xtu, mebuLx, vtEv, rJduhu MxtLzzo bxehegÕm MvuNeVefuNl «btKult jtJJtlt hnuNu. sgtk ftuE atuFJx l

&E ntug ðgtk ytE.yum.ftuz «btKu bxehegÕm jtJJtLþk <&t xuMx´d fhtJJtLþk hnuNu. <ubs ftuLx[tfxhu muBvj yu«wÔz fhtÔgt ct> ftb

NY fhtJJtLþk hnuNu.

32. yt xuLzhbtk òu ftuE ytExb hne dE ntug <tu <u atÕþ yum.ytu.yth.btk&e juJtbtk ytJNu ylu òu yum.ytu.yth.btk ytExb l ntug

<tu btfuox huEx&e huEx yultjemem fhe su CtJ Ft<t <hV&e ytvu <u ftuLx[tfxhu juJtltu hnuNu. yt mbSlu s xuLzh ChJtLþk hnuNu.

J^tht le ytRxb btk ftuLx[tfxhle btkdKe Bþsc CtJ b¤Nu lrn.

33. atÕþ ftb >hBgtl «tuxufNlle mkÃËKo sJtc>the ftuLx[tfxhle hnuNu subtk vevzt, >tuhzt, CgMËaf ctuzo, jtj xul , cuhefuxekd xuv,

ÃjtMxef vèe, rJ. ftuLx[tfxhu jtJJtLþk ylu mtaJJtLþk hnuNu. ylu ftuEvK yfMbt<&Nu <tu <ule mkÃËKo sJtc>the ftuLx[tfxhle hnuNu.

34. MxtV MËalt ytvu <tu mtEx Wvh zuEje «tud{um hSMxh ftuLx[tfxhu htFJtLþk hnuNu. >hhtus ytme.mexe yuLSlegh©ele <ubtk mne

juJtle hnuNu, <ubtk >hhtus ftb fh<t bswhtule mkÏgt, fhuj ftbdehe <&t yr^ftheytuyu ftb Mþ^thJt fu «tud{um J^thJt ltuk^ fhuj

ntug <tu <uLþk ftuBÃjtgLm ytvJtLþk hnuNu ytJe ltuk^ltk sJtc l &gu fu <u «btKu M&¤ Wvh ybj l &gu ftuLx[tfxhlu vulÕxe fhJtle

m•tt yuze.mexe yuLSlegh©elu hnuNu <u ykdu ftuLx[tfxh ftuE Jtk^tu jE NfNu lrn.

35. rlg< mbgbgto>tbtk ftb ÃþY l &gu&e xuLzh ¾jtuÍ bwsc ctfe ftbltkk 10.00% juFu vulÕxe BGþrl.ftuvtuohuNllu åþfJJtle hnuNu.

36. xuLzh le yt Nh<tu ce - 1 Vtubobtk sKtJuj Nh<tulu ytuJhYj fhNu.

Wvhtuf<<btb Nh<tu <&t rlgbtu buk ft¤SÃËJof Jtkauj Au ylu blu fçËj bksqh Au.

ftuLx[tfxhle mne - rm¬tu yuze.mexe yuLSlegh

btuctEj lkch mt&u (œrûtK Ítul)

DRAINAGE CATEGORY

Sr.No. Category Problem SLA Penalty per one

Problem Per day

1 Drainage Engineering No Drainage Machine hole Cover-Eng 24 Hours

2 Drainage Engineering Drainage-Other 48 hours

3 Drainage Engineering Drainage-Choking Of Line 48 hours

4 Drainage Engineering Drainage overflowing of mainline and 48 hours

distribution line on road

5 Drainage Engineering Drainage-Public Toilets and Urinals 72 hours

Drainage Line Blockage or Choking

6 Drainage Engineering Frequent Breakdown & Blockage Of Drain- 96 Hours

Signature of contractor with seal Deputy City Engineer-5(S.Z)

Date Ahmedabad Municipal Corporation

yufhthlwk Vtubo

(1) nwk/ybu yt&e yufhth fhwk Awk/fheyu Aeyu fu yt xuLzh hsw fh<tk vnujtk buk/ybu M&¤le bwjtft< je^e Au

ylu ftblu jd<t btjmtbtl, bswhe ylu ceS ctc<tulu jd<e M&trlf vrhrM&r<le ò<-btne<e

(2) nwk/ybu yt&e yufhth fhwk Awk/fheyu Aeyu fu yt ftuLx[tfxhtule Nh<tu rJd<tu ylu xuLzhlu jd<t >M<tJustu

ft¤SvwJof yÇgtm fgtuo Au ylu <u bwsc <ultu ybj fhJt mkb< Awk/Aeyu.

ftuLx[tfxhle mne - rm¬tu yuze.mexe yuLSlegh

btuctEj lkch mt&u (œrûtK Ítul)

" yb>tJt> BGþrlrmrvj ftuvtuohuNl”

œrûtK Ítul- Esluh Ftðþ

vtKe, z[ulus, vuJ´d, heEMxuxbuLxlt ftuLx[tfxhu Ftm JtkaJt ylu ægtlbtk htFJtle ctc< leau Bþsc Au.

" yt ftblt >huf ytExblt sÚ&tbtk ~ËLg &e cMmtu xftle JD^x &Jt mkCJ Au. ftuE ytExbltu CtJ

J^thtu ytvJtbtk ytJNu lrn. yBþf søgtyu swlt vÚ&h s VheJth heEMxux fhJtlt &Nu. <uJe >huf ytExbbtk J^^x

&tg fu ytExb yufÍefGþx l &tg <uÔþk vK clNu. ytlt btxu ftuEvK «fthle J¤<hle btkdKe fhJtle hnuNu lrn fu

CtJ J^thtu, vK ytvJtltu &Nu lrn. <ult btxu Ãþh<tk mt^ltu ylu bsqhtu ntug, yuf mt&u yluf søgtytuyu ftb

fhJtle ûtb<t ntug <ubKu s rJathelu xuLzh ChÔþk. bsqhtu l&e fu dtbzu s<t hÌtt Au fu ntu¤e, lJhtºte, r>Jt¤e, jøl

meÍl fu yLg <nuJthtubkt fu «mkdtubtk bsqhtu ytJ<t l&e <uJt fu ceò ftuEvK cntlt nuX¤ ftb ck^ htFe NftNu lrn

yLg&t htuslt Yt.250.00le J^thtle vulÕxe ftb ck^ hnu fu MËalt fh<t ytuAt bsqhtu ytJu <ulu je^u fhJtbtk

ftuLx[tfxhle mne yuze.mexe.yuLS.

rm¬t ylu btuctEj lkch (œrûtK Ítul)

AHMEDABAD MUNICIPAL CORPORATION

ENGGNIERING DEPARTMENT

GENERAL SPECIFICATION

Time limit for the work shall be as per tender notice after the order to start the works. Progress

of work should be in proportion to time limit. The details of reinforcement of R.C.C. work shall be as

per design and instructions of Add. City Engineer and his order will be considered final.

The contractor shall have to maintain account of steel, cement and other materials that may be

brought by him on site. This account shall be regularly maintained and kept open for inspection by

Municipal Staff. Watering of all the items shall be as per instructions otherwise no payment shall be

made to contractors. Mixing of concrete shall be done by concrete mixer machine. Arrangements of

binding vibrator for R.C.C. works if required shall have to be made by the contractor.

The contractor shall be remain responsible for Workmen’s compensation if any accident. The

contractor shall arrange for barricading at night and arrangement of Pagi at night to direct the traffic.

He shall be responsible for any damage to public. If any incident happen, during the execution of

work. In case of dispute for unseen or overlooked items the decision of the Dy. City Engineer shall be

final. The contractor shall have to give site clean of all rubbish during the work and at the time of

completion of work and hand over the site with final finishing of the work as directed. All the rejected

materials shall be removed from site within 24 hours by contractor at this risk and cost. Debris shall

have to cart daily from site.

For mixing mortar either for masonry or for plaster or for any other purpose contractor shall

have to prepare through of bigger size and mix the mortar in the required proportion. In on case he

shall be allowed to mix the mortar either on floor or any finished surfaces. The contractor shall have to

make his own arrangement for water required for the work.

If any extra item crops up during the progress of work the same shall be carried out by the

contractor and he shall be paid at the rate fixed by Add.C.E. as per the rate analysis based on latest

SOR or if item is not available in SOR than based on current market rates. In case of extra item

decision of Add. City Engg. shall remain final regarding rate.

If in the interest of the Corporation it is necessary to change either any site or the design of the

propose work the contractor shall carry out the same at his quoted rates without charges any extra and

the contractor will have to carry out the works and he will be paid at the rate quoted by him. No claim

for extra rate for subsequent changes in site and design is entertained.

The cubical contents of the cement bag shall be taken as 1-20 cft. Per bag and the contractors

shall have to prepare the measures boxes according to this measure.

Octroi exemption passes shall not be given for any materials required for the work. Contractor

will be fully responsible for compliance of the various provisions under contract Act. 1970 and the

Rules framed the to under.

The tender for the work shall remain open for a period (120) days from the date of opening of

the tenders for this work and that the tenderer shall not be allowed to withdraw on modify the offer on

his own during the period. If any tenderer withdraw or makes any modifications or addition in the

terms and conditions of his tender not acceptable to the Municipal Corporation the Municipal

Corporation shall without prejudice to any right or remedy be at liberty to forfeit in full the said

earnest money and black list the contractor.

If work is not started within specified time limit i.e. within ten days from the date of order to

start the work the penalty of the 0.01% tender Amount per day of delay of start shall be recovered

separately from the immediate bills payable to the contractor. Contractor has to make his own

arrangement for procurement of steel and cement.

Contractors should note the following conditions carefully :-

i) Conditional tender shall not be accepted.

ii) All tenders are to be submitted in duplicate without which the tenders are liable to be rejected.

iii) In case of tender downloaded from website, tender fee & EMD should be submitted in form of

iv) Condition of Form - B1 only Standard Specification of material & code of practice will be

applicable. Form B1 can be is available in website. Specification shall be as per ' R& B Dept. -

Govt. of Gujarat booklets of Building Works & and Road Works Specifications published by

Gujarat Book Depot, Sector-21. Gandhinagar. Other techinical condition will be applicable as

per tender condition only.

CONTRACTOR'SSIGNATURE & STAMP ADD. CITY ENGINEER

Mobile No.:- (South Zone)

AHMEDABAD MUNICIPAL CORPORATION ENGINEERING DEPARTMENT

TECHNICAL SPECIFICATIONS ITEMS REQUIRED DURING EXECUTION WORK

Name of work:- ઈ રુ વોડમાં આવેલ િસ.ટ .એમ નેશીયમ તથા વીમ ગ ુ તેમજ

All the general items of the building works are included above. If there is missing some

special item or non availability of technical spcification, the said item is excuted as per

instruction of engineer in charge bsed on Indian standard code of practice only.

REST OF ITEMS TECHNICAL SPECIFICATION & GUIDELINES ARE AS PER I.S. Code of

practice & as per R & B Dept. Guideline only.

STANDARD DETAILED TECHNICAL SPECIFICATION OF ITEMS

Demolition incl. stacking of serviceable materials & disposal of unserviceable materials with all

lead and lift.(Bldg.SOR.2021-2022)

(a) R.C.C. work (20.3,page 217)

(b) Brick work in Cement mortar (20.11,page 217)

(C) Plaster (CH NO. 20 ,20045,PG NO -186)

(d) Tiles or Stone flooring (I.No.20.23 I.C NO.-20005, ch.20 P. NO.183)

(e) Sheet roofing (G.I. Or A.C.) (I.No.20.27 I.C NO.-20007B, ch.20 P. NO.184)

(f) Doors,Windows ventilators (wood/steel) (I.No.20.49 I.C NO.-20013A, ch.20 P. NO.184)

Dismantling barbed wire fencing / Chainlink Fencing including making rolls and also including

dismantling fanning posts including all earth work concrete in the base and making

good the disturbed ground stacking unseal materials as directed and disposing all the

unserviceable materials with all leads al lifts & carting to AMC Store as directed by engg. in charge

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil(SOR 2021-22 I.C

(a) 0 to 1.5 mtr depth

(b)1.5 to 3.0 mt. depth.

(c)3.0 to 5.0 mt. depth

Providing and laying cement concrete 1:4:8 (1 - Cement : 4-Coarse sand : 8-Graded Brick bats

aggregate 40 mm normal size) and curing complete excluding cost of form work in (A) Foundation

and Plinth (upto 10 ton) (Bldg.Sor 2021-22,item no.5.3.3, 5004A)

(B)Provdg. & laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 hand broken stone

aggregates 40 mm nominal size) and curing complete excluding cost of form work in Foundation

and plinth. (Bldg.Sor 2021-22,item no.5.3.3, 5008A)

Providing & Applying Tremix method ( Vaccum de extracted & Powered trowelled ) for Concrete

Flooring with necessary finishing either smooth or wire finish as approved by consultants. Rate

shall includes the rate of side shuttering with channel , rails to form panels etc. complete.

Providing and laying controlled cement concrete M-200 and curing complete, excluding the cost of

form work and reinforcement for reinforced concrete work in: (Bldg.Sor 2021-22)

(A) Foundations, footings, base of columns, and mass concrete.(Item no.5.8.2, 05024AA)

(B) Walls from top of foundations/level up to floor two level. (Item no.5.8.2, 05024BA)

(C) Slabs, landings, shelves, balconies, lintels, beams, girders and cantilever upto floor two

level.(Item no.5.8.2, 05024CA)

(D) Columns, pillars, posts and struts upto floor two level. (Item no.5.8.2, 05024DA)

(E) Staircase up to floor two level.(Bldg.Sor 2021-22, item Code 05024EA,5.8.2)

(K) Vertical and horizontal fins up to floor two level. (Bldg.Sor 2021-22, item Code 05024KA,5.8.2)

Filling in plinth with sand under floors including watering ramming, consolidating and dressing

complete . (Bldg.Sor 2021-22,item Code04007A,4.24)

Filling Available Excavated Earth (Excluding Rock) In Trenches,Plinth,Sides Of Foundations

Etc.In Layers Not Exceeding 20 Cm.In Depth Consolidation Each Deposited Layer By Ramming

And Watering.(SOR 2021-22,I. NO.4.12, 4006)

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thicknessincluding

watering, ramming and consolidating etc. complete. (Bldg.Sor 2021-22, item Code 04008A,0.00)

Providing form work in ordinary timber planking so as to give a rough finish including centering,

shuttering, strutting and propping etc. height of propping and centering below supporting floor to

celling not exceeding 4 M & removal of the same for in situ reinforced or plain concrete work

in(Bldg.Sor 2021-22 CH. NO 9, I. NO 9.1)

(A) Foundation, footings, bases of columns etc. and mass concrete.

(B) Flat surface such as soffits of slabs, landing and the like (I) Floors etc. 200 mm in thickness.

(C) Vertical surface such as walls (any thickness) partitions and the like including attached but

tresses & string course & the like.

(D) 1.Columns Pillars Posts and struts.(1) Square Rectangular Polygonal in plan.

2. Columns, pillars, posts & struts.(2)Circular or curved in plan.

E (1) Sides and soffits of beam, haunchings cantilevers, girders, bressumers and lintels not

exceeding 1 M in depth.

(2) Sides and soffits of beam, haunchings cantilevers, girders, bressumers and lintels

exceeding 1 M in depth.

(L) chullah hoops, weather sheds, chhajas, carbels etc including edges.

(M) Staircase with-sloping or stepped soffits incl. risers & strings excluding landing.

(Q) Vertical fins and vertical sun breakers.

Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregates

mm nominal size) and curing complete excluding cost of form work and reinforcement for

reinforced concrete work in (P.74,Bldg.Sor 2021-22 CH. NO 5, I. NO 5.4.1)

(A) Foundations, footing, of columns and mass concrete

(B) Slabs, landings, shelves, balconies, lintels, beams, girders and cantilever upto floor two level.

"(C) Columns, Pillars posts and struts upto floor two

Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending,binding and placing in

position complete upto floor two level.(Bldg.Sor 2021-22,item no.5.4.11, 05014BA)

Brick Work Using Common Burnt Clay Building Bricks Having Crushing Strength Not Less Than

35 Kg/Sq. Cm. In Cement Mortar 1:6 (1 Cement : 6 Fine Sand) (A) In foundation and

Plinth(Bldg.Sor 2021-22,item no.6.13, 06002BA)

Extra for brick work in super structure above plinth level upto floor two level (B) Conventional

.Half Brick Masonry In Common Burnt Clay Building Bricks Having Crushing Strength Note Less

Than 35 Kg/Sq. Cm. In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) In Foundation and plinth

(Bldg.Sor 2021-22,item no.6.3, 06008A2A)

Extra for half brick masonry in super structure above plinth level upto floor two level. (B)

Conventional (I.C NO 06010B)

Providing cement plaster in single coat on brick/concrete wall for interior/exterior plastering upto

any floor level finished even and smooth in CM 1:3 incl. finishing with floating coat of neat cement

slurry, with necessary scaffolding etc. complete(Bldg.Sor 2021-22,item no.17.6, 17002A) (a)

Extra over above item for Ceilling plaster on Ceilling and soffits of stairs up to any floor (app.rate)

Providing 20mm thick double coat sand face/mala cement plaster on interior brick/concrete work

for plastering comprising o f base coat of 12mm thick cement plasterin cement mortar

(1Cement:4coarsesand) in rough finishing and 8mm thick t op coat of cement mortar1:2

(1Cement:2Coarsesand) finished with trovel including scaffoldingcuring etc. complete.(Bldg.Sor

Providing & laying Stone chips Plaster with / without grooves for making panels incl.backing coat

of plaster in C.M.(1:3) in grey cement as per dir.Of consultants.(N.S/ARC.)

Providing & Applying Cement Popada Plaster In Cement Mortar In 1 : 3 Incl. Cleaning

Surface Before Plastering Rate Also Incl. Scafloding, Watering , And Neat Finishing Etc.

Comp. As Dire.(N.S./ARC)

Providing and applying fibere reinforced cementitious micro concrete work in cellings and beams

incl.mixture of CEMSCREED HM (F) fair mate company material, FBR bonding agent material with

water in suItable proportion anti corrosive treatment on exposed beam,celling steel bars with

safeCore R incl.all kind of labour etc.comp.including three coat of white wash.(Approved Rate in

Providing And Laying Polished Kota Stone Slab Flooring Over 20 Mm. (Average) Thick Base

Of Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Or Lime Mortar 1:1.5 Laid Over And

Joined With Grey Cement Slurry mixed with pigmentt omatchtheshade of slab including rubbing

and polishing etc.complete.(A)25mmthick. (Bldg.Sor 2021-22 P.159,Item No.14.43,14012A)

Providing and laying Rough chiselled dressed (kota stone green) stone flooring over 25 mm. thick

base of cement mortar 1:5 (1 cement : 5 coarse sand) or L.M. 1:1.5 including pointing with cement

mortar 1:2 (1 cement : 2 coarse sand) etc. complete.(P.187,Item No.14.46,14014A)

Labour Work for moulding the polish kota stone surface rate also including provding cutting and

grinder machine for molding work etc.complete as directed.(app.rate)

Labour work for Polish kota stone surface rate also including providing cutting and grinder

machine for molding work etc comlete as directed.(app. rate)

Providing And Laying Cement Concrete Flooring For I.P.S.1:2:4 (For Indian Patent Stones) (1

Cement: 2 Coarse Sand:4 Graded Stone Aggregate 20 Mm. Nominal Size) Lain In Layer

Finished With A Floating Coat Of Net Cement.(40 Mm Th.)(SOR 2021-22 P.160,Item

Additional Rate For Providing Water Proofing Solution in I.P.S

P & L 24"x24" vitrified 8mm thick tile flooring over 20mm (average) base of cement mortar

1:6(1cement:6coarsesand) on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color cement slurry including finis ed

with flush pointing & cleaning the surfaceetc.complete for anti skit(SOR2021-22P.161,Item

P & L 24"x24" vitrified 8mm thick tile flooring over 20mm (average) base of cement mortar

1:6(1cement:6coarsesand) on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color cement slurry including finis ed

with flush pointing & cleaning the surfaceetc.(sor 2021-22 P.161,Item No.14.9,14022)

Providing and Fixing pvc.Door (sintex door-equivalent) with necessary alluminium fitting with EL-7

section frame (Approved Rate as per ARC)

Providing & laying polish kota stone (25 mm th,) Sandwich platform. Work incl. provdg good

quality & even shade polish kota stone of required size having uniform thickness. Work also incl.

providing nece. Dismentling of brick work for making jari to support the etc.comp.(app rate)

P/F glass of 4 mm thik for vent lowers and window with wooden border patti as per instruction of

eng. In chage.(app.rate)

Making hole in brick wall & all damaged work shall be well repaired as per inst. etc. comp

Provdg. & fixing rubber plug for sink or wash basin. (SOR 2021-22 P.212,Item No.23.134,23035)

Providing and fixing 30mm thick FACTORY MADE SOLID BOTH SIDE PRELAM PANEL PVC DOOR

SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x

19mm for stiles, top and bottom rails. M.S. frame shall have a coat of steel primer of approved

makde and manufactures. M.S frame covered with 5mm thick heat moulded prelim PVC ‘C’ channel

of siz 30mm thickness, 70 mm width of which 50mm shall be flat and 20mm shall be tapered in

degree Angle on either side forming stiles, and 5mm thick, 95mm wide pream PVC sheet out of

which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side ot form top and

bottom rail and 115mm wide prelim PVc sheet out of which 75nmm shall be flat and 20mm shall be

tapered on both side to form lock rail, Top, bottom and lock rails shall be provided either side of

the panel. 10mm (5mm x 2) thick 20mm wide cross PVC sheet shall be provided as gap insert for

top rail and bottom rails. Panelling of 5mm thck both side prelim sqm 2214.00 PVC sheet to be

fitted in the M.S. frame welded, sealed to the stiles and rails with 7mm (5mm + 2 mm) thick x 15mm

wide PVC sheet beading on inner side, and joined togeth with solvent cement adhesive. An

additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C” chanel

using PVC solvent adhesive etc. complete as per direction of Engineering in charge, manufacture’s

specification and rawing.(SOR 2021-22 I.C no-10044)

Providing and fixing approved standard brand factory made PVC door FRAME of size 50 x

mm with a wall thickness of 5 mm made out of extruded 5 mm rigid PVC foam sheet mitred

at corners and jointed with 2 Nos. of 150 mm long brackets of 15 x 15 mm M.S.square tube

the vertical door profiles to be reinforced with 19 x 9 mm M.S.square tube of 19 guage, EPDM

rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to

the wall using M.S.screws of 65/100 mm size etc.complete as per manufacturers

specifications and direction of Engineering in charge incl. medium grade aluminium hardware

all octroi, tax charges etc.complete (SOR 2021-22 I.C no-10050 )

Providing and fixing pre laminated PVC rigid foam sheet manufactured by approved standard

brand wall paneling of thickness 5 mm stuck on inner frame work of 35 mm wide strips of 5 mm

thick PVC rigid foam sheet. The strips should have in their centre a groove of 6 mm width and

mm depth for sinking the head of the screw used to fix the strips to the wall and should be placed

vertically at equal intervals of 405 / 407 mm center to center. The PVC strips to be fixed to the wall

using 65 mm long M.S. screws through the groove in the strip by using PVC fasteners. the

distance between two screws shall not be more then 300 mm. A groove of 2 mm to be left at the

joint of two panels for aesthetic look.

Providing and fixing 35 mm th. Shutters for doors windows & clearstory windows incl. wood

frames as specified 12 cm. x 7cm. size incl. anodised alluminium fixtures and fastenings including

primer coat of approved quality and two coats of oil paint etc. complete.(SOR.2021-22 ,ch.no.10, it

(I) Fully glazed

(II)Fully panelled

(III) Partly panelled & partly glazed.

Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in

white cement.(SOR 2021-22P.157,Item No.14.29,14008AA)

Providing And Laying Glazed Tiles 6 Mm Thick In skirting risers of Steps and dedo 10Mm

Thick Cement plaster 1:3 (1Cement : 3Coarse Sand)Finished With Flush Pointing In White

Cement slurry.(SOR 2021-22 PG NO-157,14009AA)

Providing and laying Ceramic tiles 6mm thickin flooring treads of steps and landing laid on abed of

12mm thick cement mortar 1:3 (1-cement: 3-coarse sand ) finishing with flush pointing inwhite

cement. (R&B SOR 21-22 Item Code 14009A 14.29 B)

Providing and fixing rough cast wired glass 6 mm thick bedded in putty and thick with wooden

beading including the cost of wooden beadings of Indian teak wood and necessary cutting of

glass. (SOR 2021-22 PG NO-148,13002)

(C) wired figured glass.

Supplying and fixing Nimbhada ladi 37 to 50 mm thick for walk-way, covering the activity of

excavation, ramming, Laying on sand bedding as per requirement to fix the Nibhada Stone in Line

& Level with cement pointing in cement mortar 1:2 etc complete as directed.

Labour work for fixing above or any interlocking blocks/nimbhada on up to 50mm th sand

bedding,levelling,watering anf fixing. Rate incl. average 30cm depth for excavation and or

filling,carting away debries/excavated material up to 5 km and cleaning the site etc.comp. as

directed.I00194

Providing & Laying China Mosaic Flooring On Terrace With 6Mm Th.White Or Coloured Glazed

Tiles Chips Of Mini.25 To 35Mm Approved.Square Or Rectangular Shape & Fixing It.Before Start

The Work Remove All Existing Flooring & Open Old Slab Surface With Wire Brush & Fill Crack If

Shown With Water Proof Material.Than For Making Level Gps.Work Done In Mini.45 To 50 Mm

Th.& Fixing.China Mosaic In Cm 1:3 With Neat Cement Slurry At Top & Filling The Gap With

White Or Colour Cement With Finishing Smooth Surface & Even Shade Incl.Cleaning Of

All Dirt,Dust & Other Foreign Matter.Rate Including For Making Colour Patta,Round

Vata With Fixing Neccessary Water Spout Opening Gap Etc.Comp.As Directed.(As per A.R.C)

Providing & fixing Approved Make Glass Mosaic on Plastered surface.Glass mosaic shall be of

mm x 25 mm size & 4 mm thickness pasted on a net / paper sheet.Glass mosaic pieces are

mounted uniformly on the net / paper sheet.colour shade combinations.Rate includes all

material,Labour,Scaffolding etc.complete.(N.S AS PER ARC.)

Providing cement vata (10cm. x 10 cm. size)quarter round in cement mortar 1:1 includingneat

cement finishing,watering etc. complete.(R&B SOR 21-22 Item Code 17015)

Providing, supplying and fixing precast C.C. blocks (M-20) edge kerb having size of 75 x 300 x

mm depth and as per design conveying it to the site, jointing into C:M 1:3 and racking out the

joints incl. necessary excavation of asphalt, soil etc..completed.- I00390

Conveyance charges of earth lime, murrum, building rubbish, manure, garbage, sludge, excavated

rock, fly ash, aggregate of any kind etc. comp. upto 5 km lead. (Bldg.S.O.R. 2021-2022 , )

Providing & Fixing M.S.Grill, Gate, Elevation Element Of Decorative Pattern With M.S.Channel,

Flat, Medium Grade M.S.Pipe, Square Or Round Bars With Round Heanded Bolts, Nuts, Or By

Screw. Incl. Applying One Coat Zinc Primer And Two Coat Of Oil Paint Etc.Comp.

Providing and fixing 18 gauge s.s.304 grade stair railing as per design given and direction of

P/L. fine dressed 15 to 20 mm. average thick Dholpuri stone paving over Cement mortar 1:2 (1

Cement : 2 Sand ) Including filing joints with cement mortar 1:3 and flush pointing with

coloured cement painting and finishing as directed. I01425

Providing & Laying 18 mm thick Mirror polish granite For flooring , counter , stair -riser , tread

skirting , dedo etc. machine cut or chiselled on bed of cement mortar 1:1 pointing with neat cement

slurry incl. moulding etc. comp. as per instruction of engineer in charge. (Bldg. s.o.r 2021-

Providing & Fixing 20 mm thick Mirror Polished Decorative Granite Board with Computerised

Golden Letters Discription as per instructions of engg. in charge to M.S. frame structure for

Inaugaration & Public Handover Function

Providing & Fixing M.S.structure from square & rectangular pipes,angles,flats,round etc.of

required size for above mentioned granite board of suitable size mentioned by engineer in

Removing and refixing old granite stone on walk way of KLF and for planter opp workshop in KLF

removing granite stone and cleaning cement mortar with grinder, hammer and takna, and filling the

joints with white cement and necessary colour pigment as per instruction of eng. in charge. ( As

Provinding and fixing in perfect alignment gypsum board false ceiling with all material,labour,tools

,tackles,scaffolding and equipment including providing and fixing gypboard with onw coat of

primer and two or more coats of acrylic emulsion paint

Removing and refixing the existing M.S.Grill from Brick work column and refixing the same with

new R.C.C casting column in line and level,including repairing M.S Grill if required with providing

M.S hold fast etc as per site condition.(as per R.A)

Providing & fixing 2.00 mm thick F.R.P. sheet of good quality and standard make rate also includes

necessary fabrication structure in the grid of 1'-6" x 1'-6" size usiung hollow pipe of size 3/4" x 3/4"

, 2" x 1" & 1" x 1" rate also inclusive necessary bending ,cutting and fabrication charges and

priming coat and 2 coats of oil paint of shade approved by engineer in-charge rate also includes

washer and silicon paste required for fixing the sheet in good quality as diredted.(As per ARC)

Carrying out plinth treatment to post construction / exsiting structure by spraying chenical

solution for termite control treatment incl. labour and materials consistant with I.S.I

specification.(SOR 2021-22 PG NO-199,22007)

Carrying out timber treatment to all wood work incl. drilling holes and spreying oil based chenical

solution on surface ot timbner work for termite contorl including labour and materials etc. comp

Provdg. & fixing 100 mm size P or S trap for water closet squatting pan incl. jointing the trap with

the pan & soil pipe in cement mortar 1 :1 (cement : 1 fine sand) (SOR 2021-22 PG NO-208,23011)

(A) Vitreous China :

Providing and fixing wsh down water closet (Europeantype,W.C.Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement Mortar1:1(1-Cement:1-finesand) (Sea land cover

to be measured and paid for separately) (A)vitreous China Pattern :(i) in white colour (SOR 2021-22

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed

concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long

pattern = White colour(SOR 2021-22 PG NO-207,23009)

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making good the same but excluding fittings.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.(SOR 2021-22 PG NO-

Provdg. & fixing C.P. Brass screw down bib taps of following size (SOR 2021-22 PG NO-

Providing & Fixing Angle Cock Of "Ess Ess" Trend Series Or Equivalent Standard Make As

Approved By Engg.In Charge All Complete.(N.S.) I00103

Provdg. & Fixing Gun Metal Check Or Nonruturn Full Wheel Valve. (A) 15 Mm Dia(SOR 2021-

Supplying nece hardware, Fittngs etc.comp of app.quality as under

(a)1/2 '' Half turn bib cock

(b)1/2 '' Gun metal check or non return full wheel valve.

(c) 1/2 '' Piller tap

(d) 1/2 '' stop cock

(e) 1/2 '' G.I. Nipple -3 "'

(f) 1/2 '' G.I. Nipple -6 "'

(g) 1/2 '' G.I. Nipple -9 "'

(h) 1/2 '' G.I. Nipple -12 "'

(j) S.S.Soap dish

(l) PVC 1/2 '' Half turn bib cock

Provdg. & fixing ball cock of approved qaulity as directed.(SOR 2021-22 PG NO-

(A) Copper metel.

Provdg. & Fixing Flat Back Large Urinal of White/ color of "Cera" or " Hindware" incl. C.P. Brass

waste coupline , waste pipe, pvc connection etc. Complete.( size 635 x395x420 mm )

Providing & Fixing Chromium Plated Brass Flush Cock With Lever Of "Ess Ess" - Trend

Series Or Equivalent Make Incl.Fixing In Pipe Etc.Comp.As Dir.Of Engg.In Charge.(N.S.) (1)

Provdg. & fixing 600mm x 450 mm Bevelled edge mirror of superior glass mounted of .6 mm th.

A.C. sheet or plywood sheet and fixed to wooden pluge with C.P. brass screws and washers.(SOR

Provdg. & laying S.W. Gully trap with C.I. garting brick masonry chamber & water tight C.I. cover

with frame of 300 mm x 300 mm size ( inside) with standard weight.sqare mouth trap size 150 x100

mm P trap Bldg.s.o.r.2015-2016,it. No.24.19b Ch- 24)

Provdg. And Fixing Cast Pvc/C.I.(Span) Nahni Trap Of The Following Nominal Diameter Of

Self Clenising Design With C.I. Scread Down Or Hinged Gratiing Incl. Cost Of Cutting & Making,

Good The Walls And Floors 100 Mm Inlet And 50 Mm Outlet Etc.Comp.(SOR 2021-22 PG NO-

Provdg. & fixing plastic seat & cover for wash down water closet with C.P.brass hinges and rubber

buffers.(SOR 2021-22 PG NO-209,23017 )

(B) plastci seat & cover

Provdg. & fixing 12.5 lit.PVC Flush tank with nece.fixtures etc.comp as per site condition (R&B Sor

P/F Jet Spreay at Europeon WC Pan, incl nece. lath connection, stop cock, and other fixing

material and labour as per inst. of engineer in charge(R&B Sor 21-22 I.C NO .M738)

Construction Of Under Ground Tank With 23 Cm Th.Masonary Wall In C.M.1:6

Incl.Excavation,Necessary 23 Cm B.B.C.C.1:5:10 For Foundation And Providing R.C.C.1:2:4

For Top & Bottom Slab Of 12 Mm Th.And 7.5 Mm Th.R.C.C.Paradi On Face Of Internal Side Of

Periphary Of The Tank Incl.Formwork T.M.T.Steel Reinforcement As Per Given

Design,Vibrating Curing & Mixing Of Approved Water Proofing Material With Every 50 Kg.Bag

Of Cement,Inside Plaster In C.M.1:3 And Vatta In C.M.1:1 Inside Tank,P&F F.R.C.Frame Cover Of

Size600 X 450 Mm,Fiber Steps Etc.Comp.As Dire.(N.S.) I00149

Providing & Fixing Polytheline Over Head Tank With Necessary Dia.Holes For Outlet,Inlet Over

Flow And Washout Necessary Washer And Checkput Etc.Comp.(N.S.) I00105

Providing & Fixing Door closer-complete of Approved make to wooden / Alluminium Doors as per

direction of engg.in charge.(N.S.)

P & F app.quality for Conseal lock in Alu.door .as per inst of engg in charge .etc.comp.(app.rate)

P & f app.quality for brass baby latch (door stopper) as per inst of engg in charge .etc.comp

Providing throating or plaster drip, grooves and moulding to Wall , R.C.C. chajja and slab.

Bldg.s.o.r.2021-2022,it. No.5.4.18 Ch-5 )

Providing & Fixing In Position Alluminium Doors With Frame Using Approved Quality Anodised

Extruded Alluminium Section As Approved By Engg.In Charge(Jindal Alluminium) (A)Frame

Sections 101.6x44.45 Mm(B)Shutter Bottom Vertical & Top Section 83.5x44.45 (Wt.1.31 Kg/Mt.)(At

1.31Kg/Mt)(C)Shutter Bottom Section At14.3x44.45 Mm At (1.37 Kg/Mt) Shutter Middle Section

At 100x44.3 Wt.(1.37Kg/Mt) Incl.Providing & Installing 5 Mm Thick Approved Color Acrylic Sheet

Of Standard Quality Fixed With Glazing Chips On Upper Pannel & Laminated Sheet On

Lower Pannel (Wtt.0.13 Kg/Rmt) Etc.Comp.As Direction Of Engg.In Charge. (N.S.) I00134

Providing & Fixing In Position Alluminium Window Sliding / Fix Type With Frame Using Approved

Anodised Extruded Alluminium Section As Approved By Engg.In Charge.(Jindal Alluminium)

Units Equivalent (A) Frame Sections 65 X 25 Mm (At 0.41kg/Mt) (B) Sliding Frame Bottom Section

Of 61.85 X31.75 Mm (At 0.41 Kg/Rmt) (C) Shutter Top & Bottom Section 40 X 18 Mm

(Wt.0.41 Kg/Rmt) (D) Shutter Interlock Vertical Section 10 X18 Mm.(0.41 Kg/Rmt) (E) Shutter

Vertical Of 40 X 18 Mm (0.41 Kg/Rmt) Including P/F Installing 5 Mm Thick Approved Color

Acrylic Sheet Of Standard Quality Etc.Comp.(N.S.)

Providing & Fixing In Position Alluminium Vents With Frame Using Approved Anodised

Extruded Alluminium Section As Approved By Engg.In Charge.(Jindal Alluminium) Units

Equivalent (Approved Rate) Frame Section Of 63.50 X 38.50Mm (Wt.0.68 Kg/Rmt) Incl.Providing &

Installing 5 Mm Thick Approved Color Acrylic Sheet Of Standard Quality Etc.Comp. I00136

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm

braced with flat iron diagonals 20x5 mm size with top & bottom rails of T-iron 40x40x6 mm with

mm dia. Steel pulleys complete with bolts , nuts , locking arrangement , stoppers , handles

including applying a priming coat of red lead paint & two coats of enamel paint of selected shade &

approved make. ( Bldg.s.o.r.2021-2022,it. No.11.6 +19.7 )

Providing corrugated 0.80 mm (22 gauge) thick G.I. sheets roofing fixed with galvanized iron ‘J’ or

‘L’ hook bolts, and nuts 8 mm. dia with bitumen and G.I. limpet washers filled with white lead

complete excluding the cost of purlines, rafters and trusses..(SOR 2021-22 PG NO-163,15001A)

Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed with G.I. J or L Hooks, Bolts

and nuts glavanised iron J or L Hooks Bolts and nuts 8mm dia G.I. Limpet and bitumen washers

complete.(SOR 2021-22 PG NO-163,15003A)

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S.laths interlocked

together through their entier length & joinned together at the enda by & locks mounted on

specially design pipe shaft with bracket plates giudes channel & arrangement for inside & out side

locking with push pull operation incl. the the hood cover & spring etc. including priming , oil

painting etc complete.(SOR 2021-22 PG NO-140,11006A+11007+11008A)

(A) Shutters having width below 3.5 meter

Provdg. & fixing UPVC handle valve of Prince,Supreme , Astral, finolex or equivalent make as per

dir. Of engg. In charge.

Provdg. And fixing to wall ,ceiling and floor 6.00 kg. F/Sq.Cm working pressure polythelene pipes

of the following outside diameter, low, density, complete with special flange compression type

fittings, wall clips etc. making good wall ceiling and floor. (SOR 2021-22, I.C NO-23004A TO 23004B

P/F. To Wall Ceiling And Floor 10.0 Kgf/Cm2 Working Pressure Pvc Pipes Of The Following

Outside Dia Complete With Special Flange Type Fittings,Wall Clamps Incl. All Necessary

Fittings Etc. Complete. (At Any Floor Level)

I00227 (B) 110mm Dia.

Provdg. And fixing to wall, ceiling & floor in true line and level UPVC pipe Schedule- 40 of Prince

Supreme , astral , finolex or equivalent make as approved by engg. incharge. pipe shall be fix on

wall with the help of clamp at every twi meter center to center of shall be concealed as directed in

cluding neccesarry fitting etc. in cluding testing of pipe and jointd and fixing the same with

adhesive solvent , including cost of all materials of following nominal bore Bldg.s.o.r.2021-22,it

Providing & Laying & Jointing glazed stoneware pipes incl. excavation up to 2.0 mt.,refilling,

trasporting the pipe to work site, unloading, lowering in trenches, laying and jointing the pipes in

c.m. 1:1 incl. all jointing materials such as cement, sand, hemp, bitumen as dire. testing the pipe

line to a head of 1.5 mt. and hydraulic test as dire incl. watering trenches, spreading , and carting

away of surplus earth within 100 mt.lead as dire. etc. comp.Bldg.s.o.r.2021-2022, item code

Supply of Graout Material for Paving work in KLF & work carry out as per Instructed by

engineer Incharge.(Market Rate) I01430

P/F. to wall ceiling and floor galvanized mild steel tubes (Medium grade) of the following nominal

dia. with all tube fittings and clamps incl. making good the wall, ceiling and floor. (At any floor

level) (Bldg.Sor 2015-16,23.2,23001 a to 23001d)

Providing & Fixing 5 mm Thick Mirror in Diff. Toilet Block Unit in Kankaria Lake Front with S.S

Studds & also Removing Existing Break Mirror etc comp as Directed (Market Rate)

Providing & Fixing 15 Cm Wide Chicken Mesh Jali With Nails & Then Application Of 15 Mm

Plaster On R.C.C.& Masonary Joints As Per Dir.Of Engg.In Charge (N.S.) I00095

Providing and laying (To level or slopes) and jointing reinforced concrete light duty Non-pressure

pipes I.S ClassNP2 of the following internal diameter with collars and butt ends prepared for collar

joints including testing of joints complete. AMC Drainage SOR

Constructing chamber of following size including excavation, refilling, BBCC (1:5:10) for

foundation, C.C. channel (1:2:4), finished 15 mm thick cement plaster inside in CM 1:3 finishing

with cement slurry, Brick masonry in CM 1:5 & excluding the cost of chamber seat cover

etc.completed. AMC Drainage SOR 2016 it. no.11

(A) 0.60 X 0.45 mt. size Inside Clear, Depth from 0.0 to 0.90meter for pipe dia <=150mm.

0.75 X 0.75 mt. size (Inside Clear) Depth from 0.0 to 1.20 meter for pipe dia <=20 mm

Constructing Slab Type M.H. Chamber Of The Following Size Including Excavation, Refilling, Brick

Bats Cement Concrete (1:5:10) of thickness 15 C.M., CC Channel (1:2:4) of thickness 10 C.M.,

finished 15 mm thick cement plaster inside & outside (Only for shaft) In Cm 1:3, Finishing With

Cement Slurry, P/F 4 Mm Dia M.S.Steel Hdpe Coated Steps 35 Cm C/C At 35 Cm Staggered

Masonary In Cm 1:5, Rcc Slab In Cc1:1.5:3 of thickness 15 C.M.,Including Cantering &

Reinforcement (Single jalli at 15 C.M. c/c bothway 10 mm dia.)But Excluding The Cost Of Manhole

Seat Cover Etc..Completed Of Size 0.75 X 1.00 Meter (Inside Clear, M.H. length should be parallel to

the flow) (AMC Drainage SOR 2016)

1.00 to 2.00 meter depth, (Slab at Ground level) (for pipe dia <=230 mm)

"CatchPit Jali Fixing P/F FRC catch pit jali with frame

600mm x 600mm clear opening etc. comp.. As directed by engineer in charge.AMC Drainage SOR

Carting and Fixing M.H., Chamber or Catchpite Seat and Cover in line and level to match exisisting

road level in C.C. 1:2:4 and finishing smooth, watering and protecting for 7 days etc. complete as

directed. M.H. seat cover will be supplied byA.M.C.(from any store) AMC Drainage SOR

Making connection to the ex.M.H.in running sewer incl.Dewatering and other required machinery

etc. of following dia pipes at any convenient time. All damaged work shall be well repaired as per

instructions. etc..complete. (AMC Drainage SOR 2016)

a. 150 mm to 300 mm dia.

b. 400 mm to 600 mm dia.

c. 700 mm to 900 mm dia.

Repairing damaged M.H. and rasing M.H. up to road level incl. removing damaged brick work and

repairing by brick masonry in C.M. 1:5 and plaster in C.M. 1:3 and fixing C.I. steps and existing

MH sheet cover, removing the debris from MH and carting the same as directed.AMC Drainage

SOR 2016 it. no.21

(A) up to 0.15 mt. (@ Two Coarse)

(B) up to 0.35mt. (@ Four Coarse)

(C) up to 0.65 mt. (@ Seven Coarse)

(D) up to 0.90 mt. (@ Ten Coarse )

"Providing and fixing C.I. Manhole cover

M. x 0.45M. size having weight not less than

35Kg. (R&B SOR 21-22,ITEM CODE NO-23038)"

Providing F.R.C. MH seat cover incl. carting to the work site etc. comp. Directed. AMC Drainage

SOR 2016 it. no.23

(B) Frc Medium Duty Cover Size 670 Mm Dia & 70Mm Thick 10 M.T. Load Design And Frame

Size560 Mm Clear Opening Outer Size 780 X 780 X120 Mm

(C) Frc Medium Duty Chamber Seat Cover (Frc) Cover 706 X 556 X 50 Mm Rectangular Cover Frame

Size 600 X 450 Mm Clear Opening Outer Size 816 X 666 X 100 Mm

Repairing damaged I.C./ Raising removing damaged brick work and repairing by brick masonry in

C.M. 1:5 and plaster in C.M. 1:3 and fixing C.I. steps and existing chamber sheet cover, removing

the debris from chamber and carting the same as directed. AMC Drainage SOR 2016 it. no.22

Providing Dead Cantering using good quality Country Wood Planks, wall Plate of required

thickness and size including placing the nece. supports of reqd. size, nailing, fixing with mortar,

levelling. All specification for dead centring as per standard engg. practice etc. comp. as directed.

Providing & Supplying JCB Machine on rental basis in case of emergency situation and break

down type work & also during unavoidable condition as per instruction of engg.incharge , rate

includes all nece. shifting, fuel and operating charges and stacking of useful & non-useful

materials separately up to store. (No payment should be allowed for non working condition of

machinery and for pipe line excavation and laying work) ( Based on Previously approved rate by C

Supplying Pneumatic Breaker Machine for RCC Slab or Asphalt Demolishing Work on site by using

Operator, fuel, power Supply etc. Complete as Directed. (No payment should be allowed for non

working condition of machinery and for pipe line excavation and M.H. work. Allowed only for break

down work) ( Based on Previously approved rate by C E sir )

Providing and laying red mandana stone as wall coping, in tread and riser of steps, dado, pillar,

seating etc laid on 10 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and joined with

matching shade, pigmented cement slurry including rubbing and polishing complete. Including

making of grooves(NonS.O.R.)

(A) 25 to 30mm thick

Supplying Mazdoor for misc. work like Restetment Pavment, excavation, refilling,

demolishion,levelling work & other miscellanous work.I00948 (app rate in e-module)

Supplying carpenter for repairing doors with nece material like stopper, hinges, handle, glass etc

comp. as per instruction of Engineer in charge etc. I03725 As per Market Rate

Providing fiiter for D.I./P.V.C./C.I./M./A.C. Pressure water pipe linmaintenance work with necessary

manpower, tools, plants, and equipments, and any other works required for AMC as per instruction

of Engineer in charge etc. complete. I03723 As per Market Rate

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 40mm x 40 mm

x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c. with five Horizontan lines and two diagonals of

galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with

G.I,staples including fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc

comple(SOR 2021-22 PG NO-197,22001)

Providing & fixing fencing with M.S angle posts 40mm x 40mm x 6mm an oil painting

coat fixed at 3 Mt C/C with five Horizontal lines and two diagonals of galvanized steel

barbed wire weighing 9.38 kg.per 100 meter, stained fixed toposts G.I Sptaples, including

fixing the posts in column of compound wall etc. complete. I00832 wire fencing

Providing, supplying of good quality chharu(made of brick) and spreading on track of garden,

as directed. Chharu should be made of good quality bricks, it should be red in colour, free

from coal''s dust. There should not be broken stone, brocken bricks, grass, garbedge, in

chharu. Item also incl. spreading of chharu with necessary watering and properly consolidation

with kuba. or as direceted by engg. incharge etc compl.I01393

Labour charges for cleaning Under Ground & Over head tanks by modern science technology with

six stage process etc without charging any extra cost. The complete tank cleaning by mono

cleaning systems comp. as directed. (Approved rate- With reference to Approved rate in

SOUTH Zone) I00898

Supplying of Pavadi tractor with driver having cultivator and pavadi arragements to roads to

remove deposited earth as per given inst. Of engineer in charge.I00802

Providing and fixing stoper (M.S.) 6 inch with necessary fiting in wooden door including removel of

old fiting if any etc completed as directed. I00870 6 inch

Providing and fixing Aldrop 10 mm size (M.S.) with necessary fiting in wooden door including

removel of old fiting if any etc completed as directed. I00872 Aldrop 10mm

Providing and fixing handle (M.S.) 4 inch size in with necessary fitting in wooden windows

including removal of old fitting if any etc completed as directed.I00873

Providing and fixing stopper (aluminium) 6 inch with necessary fiting in wooden door including

removel of old fitting if any etc completed as directed. I00890 6 inch

Providing and fixing Aldrop 10 mm size (aluminium) with necessary fiting in wooden door

including removel of old fiting if any etc completed as directed I00891

Providing and fixing handle (aluminium) 6 inch size in with necessary fitting in wooden door

including removal of old fitting if any etc completed as directed.I00889

Removing any kind of pavement incl stacking of serviceble material disposal of unserviceble

material with 50 meter lead and lift.I00216

Reparing of existing Aluminium window/door/partition by making necessary addition/alteration in

same sides. Rate incl of necessary fittings required and all labour included. If necessary rate also

incl. of removing from position and refixing it at same place after repairing it, etc comp. as

directed. Sub Desc : As per approved rate of AMC MET work I01334

Providing Scaffolding for Demolation , Plaster work & painting work by "H" Frame Stand of by any

means like bamboo, valli etc. inluding carting material work site and removing after compltion of

work. Rate include any type rent etc complet for any height as directerd by engg. incharge.I00899

Rapairing Of Door & Window (Steel).It Also Including Labour Charges For Erection And

Fixing Door Shutter & Frame Etc.And Necessary Repair As Per Site Condition.(N.S.) I00374

Rapairing Of Door & Window (Wood).It Also Including Labour Charges For Erection And

Fixing Door Shutter & Frame Etc.And Necessary Repair As Per Site Condition.(N.S.) I00375

Repairing of Doors/Windows shutters and Frames including refixing-aligning shutter, providing,

replacing, fixing MS hinges, Aluminium aldrops, stoppers, tadi etc. complete excluding painting as

per specifications.(app.rate)

Providing and Laying of Rubber Moulded Paver Block Grey/Coloured 60 mm thick, M-35 Grade of

any size ; shape (Usually Uni-Paver Blocks) using black trap good quality aggragate of 20 mm

nominal size for footpath, parking areas, service lanes and other areas as mentioned in the

drawing / instruction of engineer in charge. Cost includes formworks using rubber mould, Rate

providing and laying paver blocks as per required grading and specification. The paver block shall

be mechanically compacted. The work of paving blocks shall be executed in line and level by skill

mason of flooring work only. It should be laid in such a way that the no cutting of the paver block

to be necessary. if cutting of paver block necessary then it should be cut by machine only and

carting. The finished surface of the paver block shall have resonably good, plain finished. Paver

blocks shall be compacted and shall be relaid if necessary. Gravel or such type of materials shall

not be allowed for production. Laying on 5 cms thick sand bedding (As per Road Approved rate)

Providing Special Superior Quality Of Approved Shape And Size Pre-Cast M20 Cement

Concrete Interlocking Blocks Of 60mm Th. Hydraulically Pressed In Machine Of Single Nature

Cement Color For Paving In Flooring,Footpath Paving,Any Site With In Amc Limit(As per ARC)

Providing and laying white/coloured ceramic tiles of 1st quality of specified size colour shade and

of approved make.(450x450)in cladding with bal adhesive on and including bedding .coat of plaster

in cement mortar (1:4) all joints filled with coloured / white cement putty as per architect detail and

wiped to give shape joint with flush pointing and washed clean with acid as direction by e.i.c (rate

including fixing of tile in dedo with bal or approved make adhesive)

Supplying Mistry for misc. work like Restetment Pavment, excavation, refilling, demolishion,

kankaria lake front as per instruction of Engineer in charge etc I00949

Supplying and Spreading good quality coarse sand free from Impurities including Transporation to

Site and labour cost for Spreading etc. Comp. as directed.

Supplying Good Quality Bricks of Standard Size for routine maintainance work - I00689

Pointing on Uncoursed stone masonry with cement mortar1:3(1-cement:3-coarsesand)

(A)Flushpointing

Providing and laying epoxy grout of Bal Endura, laticrete or equivalent make for filling in groove

etc comp. as directed. (App. Rate)

White / Colour washing with lime on undecorated wall surfaces (two coats) to give an even shade

including thoroughly brooming the surface to remove all dirt, dust mortar drops and other foreign

matter.( Building SOR - 2021-22 Ch-18, Item No.18.11, Page no.174)

White washing with lime on wall surfaces (one coats) to give an even shade including thoroughly

brooming the surface to remove all dirt,dust,mortar drops & other foreignmatter.( Building SOR -

2021-22 Ch-18, Item No.18.12, Page no.174)

Finishing Wall With Apex Ultima Acrylic Paint Of " Asian Paint " Or Equivalent On Wall

Surfaces (Two Coats) To Give Required Even Shade After Application Of Exterior Primer Of

Approved Brand & Manufactures After Thoroughly Brushing The Surface To Remove All Dirt &

Remains Of Loose Powered Materials.(N.S.) - I00099

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

undecorated wall surface to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth..(SOR 2021-22 PG NO.-177

Extra over item 123 for every subsequent coat of wall painting with plastic emulsion pain of

approved brand.(18032)

Extra over item 123 for painting with plastic emulsion paint of approved brand on ceilings and

sloping roofs.(18032)

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel

paint, brushing, interior to give an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign matter.(SOR 2021-22 PG NO.-178

Scraping oil paint from steel and other metal surface and making the surface even (with Hand

Scraping.) (Building SOR - 2015-16 Ch-20, Item No.20017)

Painting one coats (excl. priming coat) on peviously painted steel & other Metal surfacer with

enamel paint, brushing, interior to give an even shade incl. cleaning the surface of all dirt, dust and

other foreign matter..( Building SOR - 2021-22 Ch-19, Item No.19.11 Page no.178 item code 19003)

Extra ove ritem 5 and 6 for every sub sequent coat of paint. Item code

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel

paint, interior to give an even shade including cleaning the surface of all dirt, dust and other

foreign matter sand papering and stopping.(SOR 2021-22 PG NO.-179 19011)

Painting one coats (excluding priming coat) on previously painted wood and wood based surface

with enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign

matter.(SOR 2021-22 PG NO.-180 19012)

Extra ove ritem 8 and 9 for every sub sequent coat of paint. Item code

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete(SOR 2021-22 PG NO.-182 19031)

Distempering with dry distemper of approved brand & manufacture (twocoats) and of required

shade on wall surfaces to give an even shade over & including priming coat of whiting after

thoroughly brooming the surface free from mortar dropping & other foreign matter. ( Building SOR

- 2021-22 Ch-18, Item No.18.38 Page no.175 item code 18016)

Distempeing (Two coats) with oil bound distemper of approved brand and manufacture and of

required shade on wall surfaces to give an even shade, over and including a priming coat with

distemper primer of approved brand and manufacture after thoroughly brushing the surface free

from mortar dropping and other foreign matter and also including preparing the surface even and

sand papered smooth..(SOR 2021-22 PG NO.-176 18021)

Extra over Item 120 for every subsequent coat of approved brand and manufacture.(18024)

Extra over Item 120 for distempering with oil bound washable distemper on celling and sloping

Removing dry or oil bound distemper by a washing and scraping and sand papering the wall

surface smooth including necessary repairs to scratches complete.(SOR 2021-22 PG NO.-175

Extra over item 118 for removing dry oil bound distemper on ceilings and sloping roofs.(SOR 2021-

Providing Scaffolding for Demolation , Plaster work & painting work by "H" Frame Stand of by any

means like bamboo, valli etc. inluding carting material work site and removing after compltion of

work. Rate include any type rent etc complet for any height as directerd by engg. incharge.I00899

Arrangement of zula with two or nece. skilled labour for repairing & maintenance work out side

building work etc.complete as per insructer incharge(At any floor level) (App Rate)

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two

coats of primer of approved brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.(SOR 2021-22 PG NO.-182 19032)

Providing and fixing Polycarbonate roof Lexan sabic 10 mm th.sheets of approved make, on

structural roofing / sky ligh structures in shapes as per Architect’s drawing. The rate shall include

cost of scaffolding, screws, nuts, bolts and all necessary fixtures and fastening etc complete (Rate

excluded structural steel work)

ACP CLADDING - Providing and Fixing Alluminium Composite Panel of (approved make by

Architect) 4mm thick exterior grade PVDF with coil thick of 0.25 mm & frame work made out from

Alluminium anodised section of size 50 x 25 mm ( w app = 0.57 kg/m) having weight of 2.6 kg for

15' supported on Masonary/ RCC with the help of MS Bracket fixed with Brick Fastner/ Anchor

Fastner and groove filled with 789 weather fillent of bowl corning corporation make etc. complete

as per Architect dwg. and as per instruction of E.I.C.

Provinding & fixing with Polymac mecrolone Poly carbonate sheet 6 mm thick sheet with Garwale

green glass film & joint filling by Astral silicon.Rate also includes carpenter & skilled hepler at

kids city walk way ramp shade.... as directed by engg.in charge etc.(App.rate)

Providing and fixing frameless glass window using laminated glass sheet made by two glass

sheets joined with 1.54 mm PVB laminationsheet sandwiched in between them with approved

fixing attachments, making necessary holes, anchor fasteners, edge grinding, gaskets and sealing

the edges with silicon sealant complete.(NonS.O.R.)

(A) 12 mm thick toughened glass on both sides

(B) 8 mm thick toughened glass on both sides

Hiring and operating the 20 KV 3 Phase Electric Generator for operating desilting machinery, and

lighting and other requirements with Arranging diesel to run the D.G. Set Do As Directed. 8 Hrs

Shift. (No payment should be allowed for non working condition of machinery ) AMC Drainage SOR

Providing and applying texture paint at approved quality, colour scheme, including preparation of

surface, primer 2 coats+2 coats of putty and texture paint, as per manufacture's specification,

scaffolding, roller finish etc complete as per instruction of engineer in charge (As per RA)

Providing and fixing Aluminum Composite Panel signages of various size and in any language.

The 2 mm thick Aluminum composite panel shall be cladded with retro reflective high intensity

grade radium sheets. The signages shall be of any language

all section partion work including partition , door, window,vents, etc.as dir. by EIC as per standard

sections lead & lift all floors - anodised min.15 micron any floor as dir.

Proving & Fixing 3 mm Th. Acrylic sheet as dir. by EIC.

All the general items of the building works are included above. If there is missing some special item or

non availability of technical spcification, the said item is excuted as per instruction of engineer in

charge bsed on Indian standard code of practice only.

REST OF ITEMS TECHNICAL SPECIFICATION & GUIDELINES ARE AS PER I.S. Code of

practice & as per R & B Dept. Guideline only

Seal and Signature of the Bidder Add. City Engineer