Construction of Category CH1 Type 2 Towers (112 Quarters) at Gandhinagar.

No figures

1 Excavation for foundation upto 1.5 m depth including 6895.60 Cmt 123.13

sorting out and stacking of useful materials and

disposing off the excavated stuff upto all lead.(A)

Loose or soft soil

2 Excavation for foundation From Depth 1.50mt to 5275.00 Cmt 136.30

3.0mt including sorting out and stacking of useful

materials and disposing off the excavated stuff upto all

lead.(A) Loose or soft soil

3 Excavation for foundation From Depth 3.0mt to 2372.00 Cmt 182.94

5.0mt including sorting out and stacking of useful

materials and disposing off the excavated stuff upto all

lead.(A) Dense or Hard soil

4 Filling available excavated Earth (Excluding Rock) in 12034.00 Cmt 136.92

trench Plinthside of foundation etc.in layer not

exceeding 20 cm in depth consolidation each

deposited layer by ramming and waterring etc.

coomplete.

5 Filling in Plinth with sand under floors including 375.00 Cmt 481.70

watering, ramming consolidating and dressing etc.

6 Applying general insecticide pest control treatment to 2308.00 Smt 91.63

floors, cupboards etc including labour material etc.

complete. Using Imidacloprid 30.5 SC as per IS

Part-II (0.075% concentration by mass) is

recommended 10.5 ml chemical dilluted with 5 liters

of water application0.5 liter chemical/Smt of surface

is recommended as per I.S

7 Providing and laying in position Ready Mixed M-150 2126.00 Cmt 4177.36

grade concrete for reinforced cement concrete work

in Foundations & Plinth, using cement content as per

approved Design Mix manufactured in fully automatic

batching plant established on site and transported to

site of work in transit mixer having continuous

agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work

including pumping of R.M.C. from transit mixer to site

of laying, excluding the cost of reinforcement and

including cost of centering. shuttering, formwork

finishing and admixtures in recommended

proportions as per IS : 9103 to accelerate/ retard

setting of concrete, improve workability without

impairing strength and durability as per direction of

the Engineer -In - Charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be maintained)

For All Floor Level

Item Rate In

Description of Item Quantity Unit Amount

No figures

8 Providing and laying in position Ready Mixed M-200 287.00 Cmt 5071.21

grade concrete using cement content as per approved

Design Mix manufactured in fully automatic batching

plant established on site and transported to site of

work in transit mixer having continuous agitated

mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying,

excluding the cost of reinforcement and including cost

of centering. shuttering, formwork finishing and

admixtures in recommended proportions as per IS :

9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) For all R.C.C.

memebers at all floor level

9 Extra for concreting in grade M350 instead of M250 1821.08 Cmt 273.71

including cost of cement, labour etc. complete.

10 Extra for concreting in grade M300 instead of M250 349.00 Cmt 182.81

including cost of cement, labour etc. complete.

11 Providing and laying in position Ready Mixed M-250 8755.00 Cmt 6919.21

grade concrete using cement content as per approved

Design Mix manufactured in fully automatic batching

plant established on site and transported to site of

work in transit mixer having continuous agitated

mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including

pumping of R.M.C. from transit mixer to site of laying,

excluding the cost of reinforcement and including cost

of centering. shuttering, formwork finishing and

admixtures in recommended proportions as per IS :

9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) for all RCC elements

like foundation, slabs, beams, Plinth beams, coping,

columns, walls chhajja, and stair cases, lintel etc at all

floor level from below Plinth and above Plinth level.

12 Providing cement vata (10cm. x 10 cm. size) quarter 2649.00 Rmt 24.28

round in cement mortar 1:1 including neat cement

finishing, watering etc. complete.

13 Disposing available excavated earth stuff to other 1255.00 Cmt 249.82

location or as per instruction of directed engineer in

charge. Up to All lead.No extra payment shall be made

for royalty and other government charges.

Item Rate In

Description of Item Quantity Unit Amount

No figures

14 Providing and laying TMT Bar Fe 550D reinforcement 1373598.00 kg 98.67

for RCC work including bending, binding and placing

in position complete for all floors.

15 Brick work using common burnt clay conventional 3274.00 Cmt 4650.22

building bricks having crushing strength not less than

35 Kg/sqcm. in foundation and Plinth and in super

structure in cement mortar 1:6 ( 1 cement : 6 fine

sand ) including curing etc. complete, For all floors as

directed by architect or engineer in-charge.

16 Half brick masonary in common burnt clay 5178.00 Smt 696.82

conventional building bricks having crushing

strength not less than 35 Kg/Sq.cm. in C.M. 1:4 (

cement : 4 coarse sand ) including curing etc.

complete , For all floors as directed by architect or

engineer in-charge.

17 Providing 10 mm. thick cement plaster in single coat 13450.00 Smt 247.33

on brick/concrete wall ceiling for interior plastering

finished even and smooth f including curing etc.

complete. In Cement mortar 1:3(1 cement : 3 fine

sand) For all floors as directed by architect or

engineer in-charge.

18 Providing 15 mm. thick cement plaster in single coat 35270.00 Smt 271.38

malla on rough side of half brick wall for interior

plastering finished even and smooth for All floor level

including curing etc. complete. in Cement mortar 1:3

(1 cement : 3 fine sand) For all floors as directed by

architect or engineer in-charge.

19 Providing 15 mm thick water proof cement plaster 2896.00 Smt 333.30

using water proofing powder 1Kg/1bag of cement for

all floors on brick / concrete wall work using water

proofing materials in C M 1: 3 ( 1 cement 3 coasrse

sand) including finishing with a flooting coat of neat

cement slurry etc complete For all floors as directed

by architect or engineer in-charge.

20 20 mm. thick sand face cement plaster on walls for all 18703.00 Smt 416.92

floors above ground level consisting of 12 mm. thick

backing coat of C.M. 1:3 (1 cement : 3 sand) and 8 mm.

thick finishing coat of C.M. 1:1 (1 cement :1 sand)

including making groove at required distance as

directed by architect or engineer in charge etc.

complete, For all floors as directed by architect or

engineer in-charge.

Item Rate In

Description of Item Quantity Unit Amount

No figures

21 Finishing wall with 100% weather proof acrylic 18703.00 Smt 150.88

exterior emulsion water repellant paint on wall

surface (two coats) and one coat of primer to give an

required shape even shade after thoroughly brushing

the surface to remove all dirt, and remains of loose

powdered materials.etc complete, For all floors as

directed by architect or engineer in-charge.

22 Wall painting (two coats) with plastic emulsion paint 48313.00 Smt 159.19

of approved brand and manufacture on new wall

surface to give an even shade including two coats of

lapy ( putty) & two coats of primer of approved brand

including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand

papered smooth For all floors as directed by architect

or engineer in-charge.

23 Providing and laying 600mmx600mm (PVT) vitrified 6361.00 Smt 1557.38

10 mm thick tile flooring including 10% Dark colour

tiles for pattern if required over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing

flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the

surface etc. complete For all floors as directed by

architect or engineer in-charge.No extra payment

shall be made for variation in bedding thickness as

per site conditions.

24 Providing and laying 600mmx600mm (PVT) vitrified 2121.96 Smt 1446.05

Or Anti skid vitrified 10 mm thick tile in Skirting or

dedo including 10% Dark colour tiles for pattern if

required laid on 10 mm. Thick cement mortar 1:3 (

cement : 3 coarse sand) and jointed with white

cement slurry with matching pigments including

cleaning etc. complete. For all floor as directed by

architect or engineer in-charge.

25 Providing and laying 600mmx600mm Anti skid 1353.00 Smt 1582.37

vitrified 10 mm thick tile flooring including 10% Dark

colour tiles for pattern if required over 20 mm

(average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling

of existing flooring and jointed with color cement

slurry including finised with flush pointing & cleaning

the surface etc. complete For all floor as directed by

architect or engineer in-charge.

Item Rate In

Description of Item Quantity Unit Amount

No figures

26 Providing and laying Matt Porcelene tiles 300mm x 906.00 Smt 954.45

300mm in flooring in required thickness as per

direction of engineer in charge, on a bed of 12 mm.

thick polymer modified cement based tile adhesive

finished with flush pointing in white cement and as

aproved colour,shed and size by architect or

engineear in charge. For all floors as directed by

architect or engineer in-charge. No extra payment

shall be made for variation in bedding thickness as

per site conditions.

27 Providing and laying Digital printed glazed tiles 7697.00 Smt 1025.15

300mm x 600mm of approved make , shade and

design in skirting and dedo on 10 mm thick polymer

modified cement based tile adhesive and jointed with

white cement slurry with necessary pigment to match

the shade.For all floor as directed by architect or

engineer in-charge.

28 Providing and laying rough chiseled dressed kota 2333.00 Smt 840.06

stone flooring over 20mm average thick base of

cement mortar 1:5 (1-Cement : 5-coarse sand) or L.M.

1:1.5 (1-Lime putty : 1.5 sand) including pointing

with cement mortar 1:2 (1-cement : 2-stone dust) etc.

complete. (A) 23mm to 25 mm thick kota with 5 mm

thick space shall be fixing with cometions grout ,For

all floor as directed by architect or engineer in-

charge.No extra payment shall be made for variation

in bedding thickness as per site conditions.

29 Providing and laying polished kota stone slab flooring 177.00 Smt 1019.39

over 20 mm (average) thick base of cement mortar

1:6 (1 cement : 6 coarse sand) or L.M. 1:1.5 laid over

and joinetd with grey cement slurry including rubbing

& polishing etc. complete (A) 23mm to 25 mm thick,

For all floor as directed by architect or engineer in-

30 Providing and laying Granite slab (16 to 18 mm thick) 1492.00 Smt 3165.34

one side polished flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement : 6 coarse sand) or

L.M. 1:1.5 laid and jointed with grey cement slurry

including rubbing & polishing complete, For all floor

as directed by architect or engineer in-charge.No

extra payment shall be made for variation in bedding

thickness as per site conditions.

31 Providing and laying 16 to 18 mm thick polished 370.00 Smt 3494.38

Granite stone slab machine cut in single piece in

stair tread of steps laid on 20 mm thick cement

mortar 1 : 6 ( 1 cement : 6 coarse sand ) laid over

and jointed withgrey cement slurry incl. rubbing,

5mm grove and polishing etc complete. For all floor

as directed by architect or engineer in-charge.No

extra payment shall be made for variation in bedding

thickness as per site conditions.

Item Rate In

Description of Item Quantity Unit Amount

No figures

32 Providing and laying 16 to 18 mm thick polished 311.00 Smt 2561.36

Granite stone slab machine cut in single piece in

stair riser of steps and skirting laid on 10 mm thick

cement mortar 1 : 3 ( 1 cement : 3 coarse sand )

laid over and jointed withgrey cement slurry incl.

rubbing and polishing etc complete. For all floor as

directed by architect or engineer in-charge.

33 Providing and laying 16 to18 mm thick polished 2978.00 Smt 2833.77

Granite stone slab machine cut in single piece in sill

and jambs or dedo laid on 10 mm thick polymer

modified cement based tile adhesive and jointed

withgrey cement slurry incl. rubbing and polishing

etc complete. For all floor as directed by architect or

Engineer -in-charge

34 Providing & Fixing Sandwich type Kitchen Platform 341.00 Smt 6874.35

using Top 16 - 18mm thick granite of approved shade

and sample and bottom 23mm to 25 mm thick single

side kota stone with 25 mm thick screed of cement

mortar 1:3 With granite Facia Patti. and vertical End

granite supports. The stone shall be fixed by chassing

in to the wall surface and supported vertically with

23mm to 25mm thick sandwich kota stone support

including SS Sink of size 610 x 460 mm approved by

engineer incharge with waste brass coupling, stainless

steel extension nipple, flexible PVC outlay pipe, with

swivel spout- wall mount type sink cock etc complete

as suggested by Architect/Engineer -in-charge. for all

35 Supplying and installing of round edge panels, 84mm 206.00 Smt 3379.27

wide (+/- 10mm) x 15 mm deep (+/- 5mm) of

required length . Formed out of 0.50mm TCT

Galvanized steel Panel fixed on carriers. Panel shall be

powder coated on external surface only. When two

panels are to be joined, they shall be joined together

by means of panel coupler suitable for 84R Panel.

Carrier shall be 20mm wide at bottom and 39 mm

deep or as per direction of engineer in charge with

cutouts to hold the panel in a module of 100 mm,

carrier shall be roll formed out of 0.50 mm coil coated

black colour Galvanized steel and cut to a standard

length. When two or more carriers are to be joined,

they shall be joined together by overlapping. Which

will clip on to the holes in the sides of the cut carrier

and hold them firmly in place while maintaining the

module of 100mm centre to centre or as per direction

of engineer in charge. The carrier shall be screwed on

GS L-Clit on vertical columns with Corrosion resistive

screws of required size at distance not more than

mtr. centre to centre on which panel shall be clipped

to carriers.

Item Rate In

Description of Item Quantity Unit Amount

No figures

36 Providing and laying Kota stone Shelves in cupboard 1528.00 Smt 1009.95

or any other openings using 23mm to 25mm thick

double polished and front edge moulded Kota stone

including using sandwich vertical granite support, and

fixinng in wall with cement mortar 1:3 ( 1 cement

:3coarse sand) and joined with grey cement slurrly

including moulding machine cut open edge and

charges for making grove in masonary for fixing to the

wall as dircted by Engineer in charge etc complete.as

per detailed drawing and as Instructed Engineer In

charge for all floors.

37 Providing and laying Cement concrete 1:2:4 ( 1 294.00 Cmt 3902.10

cement : 2 coarse sand : 4 graded stone aggregates

mm. nominal size) and curing complete excluding cost

of from work in foundation, Plinth, all floors and

38 Providing and laying broken chine mosaic 1712.00 Smt 779.70

flooring for terrace using 12 mm to 20 mm broken

pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement

including rounding off junctions and extending them

upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

39 Providing and fixing 32mm to 35mm thick flush Single 1141.00 Smt 8486.30

door shutter, solid core Confirming to IS:2202 & ISI

approved manufacture with Anodized Aluminium

section ( door section no 19552-weight not less than

1.116 kg/mt ) frame size 63.5mm x 38mm inserted

Non teak wood frame inside the aluminium section

for durable grip of hinges(4no each shutter) & Single

shutter with required teakwood batten having

0.8mm thick lamination on both side, including cost of

Hydraulic Door Closer , Durable Grip shall be

providing with both side 15cm long stainless steel

handle and necessary Locking system of , ,fixtures &

fastenings etc. directed by engineer in charge.

40 Providing & fixing Single shutter Door of WPC (Wood 382.00 Smt 11205.89

Polymer Composite) Frame 100 mm x 63 mm Density

650 Kgm3 wooden inserted and 24/25 mm thick

Wood Polymer Composite ( WPC ) Flush Door Having

Density of 650 kgm3 with decorative laminate of

(marino, greenlam, royale touche, century, signature)

with PVC Edge beading surrounding shutter &

including S S Aldrop 250mm, both side 15cm long

stainless steel handle and necessary Locking system of

, ,fixtures & fastenings etc. directed by engineer in

Item Rate In

Description of Item Quantity Unit Amount

No figures

41 Providing and fixing Deluxe 27 mm series Domal or 872.88 Smt 6919.76

eqivalent Three track Alluminium window with Frame

outer top, bottom and side member size 85 x 45 Jindal

section no 21401 With sliding shutters of single glass

shutter top bottom & side member size 65 x 25 Jindal

section No 21481 with ONE shutter Of SS 304-16mesh

x 26 gauge mosquito net of approved shade & Inter

lock member size 37 x 31 mm Jindal section no

(all sections should be executed as per direction of

engineer in charge) with 5 mm thick transparent

bronze colour tinted float glass for fix & Shutter with

Colour powder coated aluminum Section, Fittings,

Fixtures, Rubber Gasket and transparent silicon

sealant glass fixing to frame as per drawing and

instruction of Engineer - in charge etc. complete. For

42 Providing and fixing standared extruded of 121.68 Smt 1175.56

alluminium section of of size 63 x 38.10 x 1.2 mm(of

Make as approved by Engineer In Charge@ Wt

0.643Kg / Rmt or equivalent weight sections) with

colour anodized alluminium frame for ventilation with

5 mm thick frosted glass as details etc complete for

Ventilation V.

43 Providing & fixing M.S. grills of required pattern to 23315.20 Kg 106.23

frames of windows, ventilation or any other place etc.

with M.S. flats of required size and 16mm rod at

required spacing & frame around, square or round

bars with round headed bolts & nuts or by screws as

directed by engineer in charge for all floors(A)Plain

44 Steel work welded in built up sections, framed work 440.00 Kg 88.38

including cutting hoisting fixing in position in beams

and joists, channels, angles, tees, flats with connecting

plates or angle cleats as in main & cross beamship &

jack rafters, purlins connected to common rafters and

like for all M.S. structures other than grills.

45 Painting two coats (including priming coat) on new 1192.38 Smt 128.62

steel and other metal surface with enamel paint,

brushing interior to give an even shade including

cleaning the surface of all dirt, dust and other foreign

46 Providing and fixing Star white wash down water 114.00 No 12252.98

closet squatting pan EWC (Wall hung type W.C. Pan)

of standared make or equivalent with Premium seat

cover including jet sprey with integral 'P' or 'S' trap

including jointing the trap with C. I. soil pipe in C.M.

1:1 including seat cover of standard make premium

Health Fauset with hook and fittings and 25 mm dia

Flush Cock with C. P. brass wall flange of standard

make etc. complete for all floor.

47 Providing and fixing white earthenware flat back or 2.00 No 11921.17

corner type urinal of size 37 cm x 39 cm x 60 cm

(approved quality), including connection with waste

pipe, tap, and all necessary fittings, complete

Item Rate In

Description of Item Quantity Unit Amount

No figures

48 Providing and fixing flat back wash basin of standard 118.00 No 7523.04

make, wall mounted 550 x 400 mm size white with C.I.

or M.S. bracket including cutting holes and making

good the same including fixing C.P. brass of standard

make, and Angular or equivalent stop Cock of

standard make, C.P. brass extension nipple 62mm

long, S.S. flange water super connection pipe 60cm.

long and full thread waste coupling of standard

makeetc. complete for all floor.

49 Providing and fixing C.P.Brass screw down bib cock 564.00 No 1219.58

with flange polish bright 15mm dia of standard make

with C.P.brass extension nipple 62mm long etc.

complete for all floor.

50 Providing and fixing C.P.Brass Angular Stop cock 564.00 No 969.85

Polish bright 15mm dia of standard make with

C.P.brass extension nipple 62mm long etc. complete

for all floor.

51 Providing and fixing 600mm x 450mm bevelled edge 118.00 No 859.41

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers. For all floor

52 Providing and fixing S.S. Towel ring of standard make 118.00 No 1451.88

including necessary S.S.screw and labour etc.

complete. as directed by Engineer In Charge.

53 Providing and fixing S.S. Towel shelf having 4 112.00 No 2892.14

horizontal rod as a shelf and one rod as a hanger of

standard make including necessary S.S.screw and

labour etc. complete. as directed by Engineer In

54 Providing and fixing S.S. Soap Holder of standard 226.00 No 1544.80

make including necessary S.S. screw with labour etc.

complete. as directed by Engineer In Charge.

55 Providing and fixing 3 flow overhead shower with 112.00 No 2148.78

classik Shower Arm of standard make with 15mm or

20mm or 25mm.inlet. as directed by Engineer In

56 Providing and fixing Cansealed Stop cock of standard 224.00 No 1544.80

make regular body of concealed stop cock of suitable

for 20 mm pipe line with exposed parts with fitting

sleeve, Operating lever & Adjustable wall flange etc.

with all and labours as per the instruction of engineer

57 Providing and fixing gun metal check or non return 56.00 No 420.63

full way wheel value.( A ] 25 mm dia.

Item Rate In

Description of Item Quantity Unit Amount

No figures

58 Providing & fixing Bronze Gate Valve Ball Valve ISI 226.00 No 1582.44

mark of make as approved by Engineer In Charge.

complete with using bonding materials rates are

including of making good the wall ceiling & floor etc.

Complete for 25 mm dia. as directed by architect or

engineer in-charge.

59 Providing & fixing Valve UPVC pipes SCH-80 ISI mark 16.00 No 700.35

of make as approved by Engineer In Charge of

following out side dia. etc.complete with using

bonding materials rates are including of making good

the wall ceiling & floor etc. Complete for 32 mm dia. as

directed by architect or engineer in-charge.

60 Providing & fixing UPVC Valve 40 mm dia of ISI mark 128.00 No 846.25

make, as approved by the Engineer-in-Charge,

complete with all necessary fittings and accessories,

using appropriate bonding materials. The rate shall

include making good damages to walls, ceilings, and

floors, etc. complete, for all floors, as directed by the

Architect or Engineer-in-Charge.

61 Providing & fixing UPVC Valve 50 mm dia of ISI mark 32.00 No 1264.49

make, as approved by the Engineer-in-Charge,

complete with all necessary fittings and accessories,

using appropriate bonding materials. The rate shall

include making good damages to walls, ceilings, and

floors, etc. complete, for all floors, as directed by the

Architect or Engineer-in-Charge.

62 Providing & fixing UPVC Valve 100 mm dia of ISI mark 3.00 No 14104.08

make, as approved by the Engineer-in-Charge,

complete with all necessary fittings and accessories,

using appropriate bonding materials. The rate shall

include making good damages to walls, ceilings, and

floors, etc. complete, for all floors, as directed by the

Architect or Engineer-in-Charge.

63 Providing & fixing NRV Valve made of brass with ISI 3.00 No 12325.60

mark as approved by Engineer In Charge of following

out side dia. etc.complete with using bonding

materials rates are including of making good the wall

ceiling & floor etc. Complete for 100 mm dia.as

directed by architect or engineer in-charge.

64 Providing & fixing UPVC Valve 80 mm dia of ISI mark 3.00 No 8583.00

make, as approved by the Engineer-in-Charge,

complete with all necessary fittings and accessories,

using appropriate bonding materials. The rate shall

include making good damages to walls, ceilings, and

floors, etc. complete, for all floors, as directed by the

Architect or Engineer-in-Charge.

Item Rate In

Description of Item Quantity Unit Amount

No figures

65 Providing & fixing UPVC Valve 65 mm dia of ISI mark 3.00 No 5808.48

make, as approved by the Engineer-in-Charge,

complete with all necessary fittings and accessories,

using appropriate bonding materials. The rate shall

include making good damages to walls, ceilings, and

floors, etc. complete, for all floors, as directed by the

Architect or Engineer-in-Charge.

66 Providing and fixing in position cowel went to 40.00 No 393.04

pipes.(B) 75mm dia.

67 Providing and fixing in position cowel went to 96.00 No 505.17

pipes.(C) 110mm dia.

68 Providing, fixing, testing & commissoning of GI flanged 2.00 No 1978.96

end lever operated butterfly valve confirming to IS

with necessary specials, unions, nipple, GI bolt nut

,EPDM rubber washers as per drawing &

specifications etc. complete 50 mm dia.as directed by

architect or engineer in-charge.

69 Providing, fixing, testing & commissoning of GI flanged 2.00 No 3180.63

end lever operated butterfly valve confirming to IS

with necessary specials, unions, nipple, GI bolt nut

,EPDM rubber washers as per drawing &

specifications etc. complete 80 mm dia.as directed by

architect or engineer in-charge.

70 Providing, fixing, testing & commissoning of GI flanged 4.00 No 4037.97

end lever operated butterfly valve confirming to IS

with necessary specials, unions, nipple, GI bolt nut

,EPDM rubber washers as per drawing &

specifications etc. complete 100 mm dia.as directed

by architect or engineer in-charge.

71 Providing laying and jointing in true line and level 100 410.00 Rmt 1450.32

mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water

including fittings of make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. as

directed by architect or Engineer -in-charge

72 Providing laying and jointing in true line and level 80 380.00 Rmt 993.85

mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water

including fittings of make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.as

directed by architect or engineer in-charge.

Item Rate In

Description of Item Quantity Unit Amount

No figures

73 Providing laying and jointing in true line and level 65 260.00 Rmt 758.84

mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water

including fittings of make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials as

directed by architect or Engineer -in-charge

74 Providing laying and jointing in true line and level 50 872.00 Rmt 133.48

mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings of make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials as

directed by architect or Engineer -in-charge

75 Providing and fixing conceled center point to wall 296.00 Rmt 660.58

ceiling and floor CPVC( SDR 13.5) pipe of make as

approved by Engineer In Charge having National

Senitation Foundation (NSF) seal for potable water of

following nominal dia, tube fittings and clamps

including making good the wall ceiling and floor etc.

complete. 50 mm dia. as directed by architect or

engineer in-charge.

76 Providing and fixing conceled center point to wall 240.00 Rmt 447.72

ceiling and floor CPVC( SDR 13.5) pipe of make as

approved by Engineer In Charge having National

Senitation Foundation (NSF) seal for potable water of

following nominal dia, tube fittings and clamps

including making good the wall ceiling and floor etc.

complete. 40 mm dia. as directed by architect or

engineer in-charge.

77 Providing and fixing conceled center point to wall 320.00 Rmt 338.24

ceiling and floor CPVC( SDR 13.5) pipe of make as

approved by Engineer In Charge having National

Senitation Foundation (NSF) seal for potable water of

following nominal dia, tube fittings and clamps

including making good the wall ceiling and floor etc.

complete. 32 mm dia. as directed by architect or

engineer in-charge.

Item Rate In

Description of Item Quantity Unit Amount

No figures

78 Providing and fixing conceled center point to wall 2996.00 Rmt 253.82

ceiling and floor CPVC( SDR 13.5) pipe of make as

approved by Engineer In Charge having National

Senitation Foundation (NSF) seal for potable water of

following nominal dia, tube fittings and clamps

including making good the wall ceiling and floor etc.

complete. 25 mm dia. as directed by architect or

engineer in-charge.

79 Providing and fixing conceled center point to wall 1430.00 Rmt 170.36

ceiling and floor CPVC( SDR 13.5) pipe of make as

approved by Engineer In Charge having National

Senitation Foundation (NSF) seal for potable water of

following nominal dia, tube fittings and clamps

including making good the wall ceiling and floor etc.

complete. 15 mm dia.as directed by architect or

engineer in-charge.

80 Providing laying and jointing in true line and level 110 1696.00 Rmt 876.90

dia. P.V.C. SWR ( Type 'B' ) with one end plain and

other end socketed with rubber ring , pipe and fittings

conforming to IS 13592 of make as approved by

Engineer In Charge . pipe shall be fixed on the wall

with the help of PVC clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings such as bends, tee, shoes etc. including testing

of pipe and joints and fixing the same with PVC Clamp

with adhesive solvent cement including cost of all

material.as directed by architect or engineer in-

81 Providing laying and jointing in true line and level 75 554.00 Rmt 738.11

mm dia. P.V.C. SWR ( Type 'B' ) with one end plain

and other end socketed with rubber ring , pipe and

fittings conforming to IS 13592 of make as approved

by Engineer In Charge. pipe shall be fixed on the wall

with the help of PVC clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings such as bends, tee, shoes etc. including testing

of pipe and joints and fixing the same with PVC Clamp

with adhesive solvent cement including cost of all

material.as directed by architect or engineer in-

82 Providing and fixing to wall ceiling and floors 10.0 Kg. 1608.00 Rmt 339.05

F/Cm2 working pressure I.S.I. mark P.V.C. pipe of

mm dia low density of make as approved by Engineer

In Charge complete with special flange compression

type fitting wall clamps etc. including making good the

wall ceiling and floor and trenches.as directed by

architect or engineer in-charge.

Item Rate In

Description of Item Quantity Unit Amount

No figures

83 Providing and fixing to wall ceiling and floors 10.0 Kg. 924.00 Rmt 192.02

F/Cm2 working pressure I.S.I. mark P.V.C. pipe of

mm dia low density of make as approved by Engineer

In Charge complete with special flange compression

type fitting wall clamps etc. including making good the

wall ceiling and floor and trenches.as directed by

architect or engineer in-charge.

84 Supplying and Fixing Z patti type G.I.Brackets for 3117.00 Rmt 301.99

SWR/RWR/Water supply Plumbing (down take) pipe

with GI Clamp and Nacessary Fastenrs .

85 Providing and fixing PVC SWR Nahni Trap IS 14735 562.00 No 599.64

for drain 100 mm dia with jali of following nominal

Diameter of self cleaning design with CI scread down

or hinged grating including the cost of cutting and

making good the wall.

86 Providing and fixing S.W. gully trap with C.I. grating 80.00 No 1246.92

brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps.(B) 150mm x 100mm

size P or S type

87 Providing and laying in trenches 10.0 Kg. F/Cm2 320.00 Rmt 959.08

working pressure I.S.I. mark PVC SWR pipe of

mm dia low density pipe of make as approved by

Engineer In Charge including fitting etc completein

88 Providing and laying in trenches 10.0 Kg. F/Cm2 2190.00 Rmt 1557.05

working pressure I.S.I. mark PVC SWR pipe of

mm dia low density pipe of make as approved by

Engineer In Charge including fitting etc completein

89 Constructig brick masonary chamber of 500 mm x 700 88.00 No 3597.27

mm inside dimension and depth upto 0.45 m for

under ground CI inspection chamber and bends with

bricks having crushing strength not less than

Kg/Smt. in CM. 1:5 precast fibre reinforced concrete

frame & cover of square frame of approx

800x800x150mm & round cover 75mm thick, RCC

top slab CC 1:2:4 ( 1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size ) foundation

concrete 1:5:10 inside plaster 15 mm thick with

cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

90 Extra over items Chamber for every additional depth 120.00 No 264.86

of 0.1 M. of part thereof beyond 450 mm depth for

Brick masonry chamber. (ii) for 500 mm x 700 mm

91 Providing erecting and fixing double coated ISI water 118000.00 Liter 3.95

tank of required capacity each with all necessary

fittings and connection etc. complete on terrace

Item Rate In

Description of Item Quantity Unit Amount

No figures

92 Providing and fixing 50 mm dia copper metal ball cock 38.00 No 189.84

of approved quality as directed.

93 Providing and laying Cinder filling for all floors etc 87.00 Cmt 627.21

complete: (a) Reffiling in sunk.

94 Providing and applying Metric Osmotic treatment 605.00 Smt 571.49

(Waterproofing, osmotic, cement-based protective

product for concrete, single-component, thixotropic

covering, resistant to positive and negative hydraulic

pressure) of approved make and quality in two coats

with uniform finish and complete coverage, over

prepared surface free from dust, grease, or loose

particles. Surface shall be cleaned thoroughly before

application. The treatment shall be applied with

brushes only as per manufacturer's specifications and

allowed to dry between coats.

95 Providing and fixing 25 mm thick , 50mm wide 183.00 Rmt 3159.28

Staineless steel letters of any size ( Minimum

mm) on 3 mm thick exterior composite panel of any

size with all material, hardware, acessories & fittings

etc completed.

96 Providing and Making holes ranging from 50 mm to 568.00 No 1428.65

160 mm diameter in RCC walls, slabs, or any other

RCC members using a diamond core cutting machine

(HILTI or equivalent), including disposal of debris and

refilling the remaining portion with non-shrink grout

material mixed with an epoxy bonding agent, for all

floors, complete in all respects as per the direction of

Engineer-in-Charge.

97 Providing and Fixing M.S. Powder Coated Letter Box of 112.00 No 694.58

size 230mm wide x 80mm deep x 280 mm high having

gauge of 20 including locking arrangement and

fixtures etc. complete as directed by engineer in

98 Design, supply & installation of signages including 81.00 Smt 5361.62

lettering made of zink sulphide based glow in the

dark rigid sheet with high luminous property enclosed

in a transperent weather proof U/V stabilised plastic

pasted on 3 mm thick clear acrylic sheet sheet.

99 Providing and laying in position rebar as specified in 5280.00 No. 221.85

true line & level including drilling adequate hole,

cleaning the same, grouting with HILTI, HY -

rebar system as per manufacturers specifications

strictly in accordance with structural details having

minimum depth of embedment 125, etc complete For

all floors (a) 10 to 12 mm dia

Item Rate In

Description of Item Quantity Unit Amount

No figures

100 Providing and fixing GI chicken mesh jali 12.5 mm x 2822.00 Smt 82.64

24 swg at R.C.C. masonry joints at any height with all

labour & material etc. complete.

101 Providing and fixing in position S.S. 304 railing 806.00 Rmt 4688.07

(considering 0.95 meter hight) by providing vertical

Square pipe support of 40 x 40 mm with jula . pipe on

top 50 mm dia stain less steel pipe rail including

bending welding and fixing in R.C.C./brick work as

directed. (top 50 dia vertical, vertical Square pipe 40 x

40 mm at 0.9 mt. c/c & horizontal 4 no Square pipe -

25 x 25 mm. and all pipe with 1.5mm thickness). for

102 Providing and fixing in position S.S. 304 Hand Rail for 24.00 Rmt 1673.86

Balcony by providing vertical round pipe support of

15 mm dia pipe on top of 50 mm dia stain less steel

pipe rail with starting and end point SS Cap including

bending welding and fixing in R.C.C./brick work as

directed. (Horizontal 50 dia. and Vertical Round pipe

of 25 mm dia as per required and all pipe with 1.5mm

thickness). for all floor as directed by engineer in

103 Providing & Filling 5 mm wide Epoxy Grouting in 15014.00 Rmt 62.54

Vitrified Flooring & Wall Dedo etc. Complete.

104 Providing and fixing Stainless Steel Gate at Staircase 57.00 Smt 8723.54

entrance with 50 mm dia top Pipe and vertical

supports of 40x40x1.5 mm Square Pipe framing with

SS shutters with door frame 25x25x1.5 mm -

shutters and internal 3/4" dia steel pipes at required

spacing, including fabricating, fixing in position in line

and level, all SS Fixtures etc. complete.

105 Providing and fixing pre-cast Rubber Dye / steel Dye 1958.00 Smt 706.90

inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming

to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc.

Item Rate In

Description of Item Quantity Unit Amount

No figures

106 Providing and Fixing 15 mm thick 300 mm x 300 mm 62.00 Smt 1211.52

Tactile Warning Tiles (Attention Tiles i.e. Tactile

Warning Surface Indicator {TWSI}) of Tac Button

Yellow Plus or equvqlent make in flooring laid on

mm thick cement mortar 1:6 (1 cement : 6 coarse

sand) on new surface and jointed with cement slurry

including finished with flush pointing & cleaning the

surface for all floors as per detailed drawing etc.

complete as directed by Architect or Engineer in

charge. Thse tiles shall be Anti Skid, Chemical

Resistant, Fade Proof, Frost - Heat & Weather Proof,

High Flexural Strength, Highly Durable, Stain

Resistance . All Tactile Warning Tiles meet the specific

size and dimension standards as required by ISO/FDIS

107 Providing and fixing 30 mm wire gauge shutters using 12.00 Smt 1270.12

galvanised M.S. wire of I.S. gauge designation of 85G

with wire of 0.56 mm dia, for doors, windows and

clerestory windows including bright finished or/and

black enamelled M.S. butt hinges with necessary

mango wood or equivalent quality.

108 Providing and applying black japan treatment of 1614.00 Smt 73.47

approved make and quality in two coats with uniform

finish and complete coverage, over prepared surface

free from dust, grease, or loose particles. Surface shall

be cleaned thoroughly before application. The

treatment shall be applied with brushes only as per

manufacturer's specifications and allowed to dry

between coats.

109 Providing and fixing hollow metal door with frame 240.00 Smt 4974.16

made from galvanized iron (GI) sheets, ensuring

stability and integrity. The door leaf shall be 30 to

35mm thick, double skin, fabricated from 1.2mm thick

GI sheet with honeycomb infill, and finished with

powder coating in approved shade. The frame shall be

100x50mm single rebate profile made from 1.5mm

thick GI sheet with inbuilt groove, powder coated to

match. Door shall be fitted with stainless steel hinges

(4 No. per shutter), aluminum handles, and door

magnets to retain the door in closed position. The

door should open up to 170 degrees for ease of access.

All components shall be factory prepped, field

assembled, and installed complete with all necessary

hardware, accessories, and fixings as per

manufacturer’s specifications.

Item Rate In

Description of Item Quantity Unit Amount

No figures

110 Covering Wardrobe Niche: All the exposed opening 882.00 Smt 6185.17

gap of Niche and Pelmet to cover vertical wall offsets

should be cladded by Machine laminated 16 mm

Plywood confirming to IS 303. FRAMING is to be done

with plywood with open faces laminated plywood

sheet. OPENABLE DOORS are made from both side

Laminated (one side white and one side decorative or

as per direction of EIC) Plywood Panels, 16 mm

Plywood confirming to IS 303 and extra support strap

of 16 mm laminated plywood. all the plywood edges is

to be covered with 0.8mm edge bands fixed with hot

melt glue machine pressed. shutters to be fixed on

frame with Auto closing hinges as approved by

EIC(make kich, hafele, hettich) and has provision for

aligning and leveling with carcass surface. SS handles

of size greater than 150 mm as approved by EIC

(make kich/ hafele/ hettich). all the gaps are to be

filled with silicon as per direction of engineer

111 Providing and fixing drawer type kitchen basket 336.00 Smt 19472.65

cupboard using Plywood of 16 to 18 mm thick for

frame and Shutter , With 0.8 mm thick decorative

lamination sheet on Front Side & Inside 0.8mm thick

plain lamination sheet . S.S. telescope channel of

required size, or S.S. fixtures & fastening, handle as

approved quality including using necessary screws,

fevicol, pvc batten including fixing S.S. basket of 19" x

20" (1) Plain multi purpose 100 mm-2 no (2) Cup

soucesser 100 mm-1 No (3) Plate 100 mm -1 No (4)

Thali 200 mm -1 No (5) Vegetable plain 200 mm -1 No

including fixing S.S. telescope channel as per approved

quality and given detail drawing etc. complete.

112 Providing & fixing Loft shutters with frame using 16 546.00 Smt 4715.99

to 18 mm thick all proof ply wood and fixing on

mm thick decorative lamination sheet on Front Side &

Inside 0.8mm thick plain lamination sheet . PVC

bedding and necessary S.S. fixtures & fastening, nails,

fevicol, magnet etc. complete.

113 Providing and fixing 15 mm dia C.P. brass 2-way bib 114.00 No 2758.56

tap with wall flange, extension nipple and all

necessary fittings complete, of approved make as

directed by Engineer-in-charge.

114 Drilling pilot borehole of size 250/300 mm at above 250.00 Rmt 573.68

site by mud flush direct rotery rig.

115 Reaming of 250/300 mm dia.Pilot borehole to size 250.00 Rmt 349.46

550 mm dia. Incliding assembling ,lowering housing

,casing strainerpipers with gravel packing and clayball

packing etc.

116 Development of cach water bearingzone coming 1.00 Job 27191.22

across the full depth of tubewell by lowering 100 mm

dia.Drop line and 32 mm dia airline for each water

bearing Zone with suitabale capacity air compressar

up to avilability of sand free discharge.

Item Rate In

Description of Item Quantity Unit Amount

No figures

117 900 CFM /200 PSI capacity air compressar upto the 1.00 Job 27603.30

availability of sand free discharge for upto 250 mtrs

118 Supply of M.S. E.R.W. plain end medium duty pipe 250.00 Rmt 3605.70

confirming to IS 4270/2001 with latest amendments

Of size 250 mm dia (minmum thicknes of 7.1 mm)

119 Screen Slotting of MS ERW balnce pipe with size of 30300.00 slots 0.24

slot 6.75 cm X 6.35 cm X 3.12 mm for 250 mm dia pipe

120 Supply of miscellenious bore material suitable to 250 1.00 Pair 2037.91

mm dia pipes as following (A) MS Bore clamps made

from M.S. plate with 3 holes on either side with nuts &

bolts of std make of size 900X100X16 mm flat suitable

for 250 mm dia pipe.

121 Supply of miscellenious bore material suitable to 250 1.00 No 1161.62

mm dia pipes as following (B) MS Bore Plug having

100mm height made from M.S. plate with 3 holes at

equal distance on cirCmtferrence for nut-bolts type,

locking arrrangement with nuts-bolts & lock nuts of

std make complete from 5 mm thick M.S. plate

suitable for 250mm dia pipe.

122 Supply of miscellenious bore material suitable to 250 1.00 No 1065.02

mm dia pipes as following (C) MS Bail Plug having

length 0.45 mtr from medium class pipe as per I.S.

suitable for 250 mm dia pipe.

123 Supply of miscellenious bore material suitable to 250 333.00 NO 91.71

mm dia pipes as following (D) Steel bent plate

suitable for ERW pipe for 250mm dia (size:200 X

125 Electrologging of Pilot bore hole with carting. 1.00 Job 18180.00

126 Geohydrological ground water investigation including 1.00 No 14428.86

vehicle charges for three phase DTH bore/DR tube

well including water sample testing & chemical

127 Providing, supplying and commissioning ISI mark CI 1.00 No 5401.48

D/F Reflux Valves of following class and diameter

including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores stacking etc.

complete. Reflux valves PN 1 IS 5312 with ISI mark

size: 100 mm

128 Manufacture, supply and delivery of following ISI 250.00 Rmt 152.51

marked HDPE pipes (IS:4984/1985 with latest

amendment) having material Grade PE-80 in

approximate 100 meter coil length or as per GWSSB

requirement with SS 316 nipple at both ends having

11 TPI threads as per specifications, press fitted and

bolted having nominal diameter as under as per

detailed technical specifications.

Item Rate In

Description of Item Quantity Unit Amount

No figures

129 Providing and laying Cement concrete 1:2:4 ( 1 79.00 Cmt 3758.19

cement : 2 coarse sand : 4 graded stone aggregates

mm. nominal size) and curing complete excluding cost

of from work in foundation, Plinth, for G.F

130 Constructing manhole with R.C.C top slab in 1:2:4 mix 60.00 NO. 12750.54

(1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size) foundation concrte 1:3:6 mix (1

cement : 3 coarse sand : 6 brick bats 40 to 50 mm

nominal size) inside plastering 15 mm thick with

cement mortar 1:5 (1 cement : 5 coarse sand) finished

with a floating coat of neat cement slurry and making

channels in cement concrte 1:2:4 mix ( 1 cement :

coarse sand : 4 stone aggregate 20 mm nominal size)

finished smooth complete including curing & testing

(I) Inside size 900 mm x 1200 mm and 1.50 meter

deep including FRC cover with frame size 560 mm

diameter (A) with 230 mm thick walls of brick

masonry using bricks having crushing strength not

less than 35 Kg / Sqcm in cement mortar 1:5 (1

cement : 5 coarse sand) (1) A-type depth 0.90 meter

for 150 mm diameter sewer.

131 Constructing manhole with R.C.C top slab in 1:2:4 mix 48.00 NO. 21057.43

(1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size) foundation concrte 1:3:6 mix (1

cement : 3 coarse sand : 6 brick bats 40 to 50 mm

nominal size) inside plastering 15 mm thick with

cement mortar 1:5 (1 cement : 5 coarse sand) finished

with a floating coat of neat cement slurry and making

channels in cement concrte 1:2:4 mix ( 1 cement :

coarse sand : 4 stone aggregate 20 mm nominal size)

finished smooth complete including curing & testing

(I) Inside size 900 mm x 1200 mm and 1.50 meter

deep including FRC cover with frame size 560 mm

diameter (A) with 230 mm thick walls of brick

masonry using bricks having crushing strength not

less than 35 Kg / Sqcm in cement mortar 1:5 (1

cement : 5 coarse sand) (2) B-type depth 1.50 meter

for 300 mm diameter sewer.

Item Rate In

Description of Item Quantity Unit Amount

No figures

132 Constructing manhole with R.C.C top slab in 1:2:4 mix 48.00 NO. 25178.28

(1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size) foundation concrte 1:3:6 mix (1

cement : 3 coarse sand : 6 brick bats 40 to 50 mm

nominal size) inside plastering 15 mm thick with

cement mortar 1:5 (1 cement : 5 coarse sand) finished

with a floating coat of neat cement slurry and making

channels in cement concrte 1:2:4 mix ( 1 cement :

coarse sand : 4 stone aggregate 20 mm nominal size)

finished smooth complete including curing & testing

(I) Inside size 900 mm x 1200 mm and 1.50 meter

deep including FRC cover with frame size 560 mm

diameter (A) with 230 mm thick walls of brick

masonry using bricks having crushing strength not

less than 35 Kg / Sqcm in cement mortar 1:5 (1

cement : 5 coarse sand) (3) C-type depth 2.25 meter

for 300 mm diameter sewer.

133 Extra rate for constructing B.B masonry for every 120.00 Each 522.96

additional depth 0.10 meter or part thereof over item

24.27 (I) for depth from 0.90 meter to 1.50 meter.

134 Extra rate for constructing B.B masonry for every 96.00 Each 397.19

additional depth 0.10 meter or part thereof over item

24.27 (II) for depth from 1.50 meter to 2.25 meter.

135 Extra rate for constructing B.B masonry for every 96.00 Each 577.92

additional depth 0.10 meter or part thereof over item

24.27 (III) for depth from 2.25 meter to 3.15 meter.

136 Providing and laying (To level or slopes) and jointing 910.00 Rmt 678.02

reinforced concrte loght duty Non-pressure pipes I.S

Class NP2 of the following internal diameter with

collars and butt ends prepared for collar joints

including testing of joints complete. (D) 300 mm

137 Providing and laying precast FRC cover of 600*600 4.00 No 3623.88

mm size for chamber including cost of labour,

material etc. TMT bar and cost of from work curing etc

complete as directed by engineer in charge.

138 Supplying and laying of screened rounded gravel of 25 442.00 Cmt. 1040.86

to 90 mm, 20 to 50 mm and 5 to 20 mm size filling in

layers or packing around stainer pipe etc.complete.

139 Drilling 600 mm dia. Bore in Alluvial,sandy strata 300.00 Rmt. 1212.00

including cost of bentonite powder, carting of ring. etc.

complete drilling shall be done by mud flush rotary

equipment borehole shold withstand unceased at

least 72 hours.including development of bore by

compression of required capacity as directed.

140 Providing and lowering jointing 6kg/cm2 PVC strainer 300.00 Rmt 2223.01

pipe 250 mm diameter first class confirming with IS :

4935 including cost of outer camp solution

etc.complete.

Item Rate In

Description of Item Quantity Unit Amount

No figures

141 Constructig brick masonary chamber of 500 mm x 700 32.00 No 3660.76

mm inside dimension and depth upto 0.45 m for

under ground CI inspection chamber and bends with

bricks having crushing strength not less than

Kg/Smt. in CM. 1:5 precast fibre reinforced concrete

frame & cover of square frame of approx

800x800x150mm & round cover 75mm thick, RCC

top slab CC 1:2:4 ( 1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size ) foundation

concrete 1:5:10 inside plaster 15 mm thick with

cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete. for Rain Water Harvesting

142 Providing and fixing concertina razor blade coil 410.00 Rmt 486.82

fencing with punched tape concertina coil 600 mm dia

45 mt openable length having 24 no rounds per 6 mt

length, upto 3mt height of wall with new angle iron

(50mm x50mm x5mm )requird shaped As per

Directed Engeenier in charge. placed 2.4mt or 3.00mt

apart and with 4 horizontal R.B.T. reinforced barbed

wire(3 mm) , stud tied with G.I. staples and G.I. clips to

retain horizontal, including necessary bolts or

G.I.barbed wire tied to angle iron, all complete as per

direction of Engineer-in-charge, with reinforced

barbed tape (R.B.T.)/Spring core (2.5 mm thick) and

weight 43.478 gm/meter at compound wall.

143 Providing & fixing Cattle Trap of required size 17.00 Sqmt 28162.44

including excavation, PCC of 150 mm tk. As base PCC

M15 grade, Brick necessary brick work, internal

plaster, bottom IPS 1:1.5:3, 80 mm dia heavy duty GI

Pipes to be supported on MS 200 mm girders,

Openable cover with frame for cleaning, collection pit,

PVC pipe to be connected to main line including all

necessary weldings, fixing the pipes and girders,

grouting etc. complete

144 Provision and installation of a precast wall, 300.00 Smt 1301.89

incorporating rectangular RCC poles with dimensions

of 0.15m x 0.15m placed at intervals of 2.10m center-

to-center on the ground. The construction process

includes excavation in CC 1:5:10 (cement: sand:

aggregate) at a size of 0.30m x 0.3m x 0.6m. The

completion of the task entails fitting 50mm thick

precast RCC plates between the poles. This

comprehensive undertaking covers all essential

fittings, labor charges, and associated expenses,

ensuring the precast wall's completion in accordance

with the specified requirements.

Item Rate In

Description of Item Quantity Unit Amount

No figures

145 Removing and refixing of precast compound wall 300.00 Smt 548.43

consisting of rectangular RCC poles of size 0.15m x

0.15m placed at 2.10m center-to-center, and 50mm

thick, 2.10m long precast RCC plates fitted between

the poles. The work includes careful dismantling of

existing wall components without damage, excavation

of foundation pits of size 0.30m x 0.30m x 0.60m in

cement concrete 1:5:10 (cement: coarse sand:

aggregate), relaying of foundation, and proper

alignment of poles and plates. The rate includes all

materials, labor, transportation, necessary fittings,

and tools required for completing the work in line,

level, and as directed by the Engineer-in-Charge.

146 Box cutting the road surface to proper slope and 2585.00 Cmt 109.24

camber for making a base for road work including

removing the excavated stuff and depositing on the

road side slope as directed upto All lead.

147 Providing & laying 150 mm thick compacted granular 597.00 Cmt 873.61

coarse sand including spreading, watering and

consolidation etc. complete.

148 Providing and laying, spreading and compacting 597.00 Cmt 2344.33

B.T.M.C. stone aggregates of 63mm to 40mm size

to W.B.M.150mm thick including spreading in

uniform thickness, hand packing, rolling with

vibratory roller 8-10 tones to proper grade and

camber, applying and brooming requisite type of

screening / binding / filler materials to fill up the

interstices of coarse aggregate, watering and

compacting to the required density. Grading - II

using screening type - A (13.2mm Agg.) etc. complete.

Item Rate In

Description of Item Quantity Unit Amount

No figures

149 Providing and laying in position Ready Mixed M-250 796.00 Cmt 7784.52

grade concrete using cement content as per

approved Design Mix manufactured in fully automatic

batching plant established on site and transported to

site of work in transit mixer having continuous

agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work

including pumping of R.M.C. from transit mixer to site

of laying, excluding the cost of reinforcement and

including cost of centering. shuttering, formwork

finishing and admixtures in recommended

proportions as per IS : 9103 to accelerate/ retard

setting of concrete, improve workability without

impairing strength and durability as per direction of

the Engineer -In - Charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be maintained),

Including TRIMIX usinng P21(water reducing

concrete admixture at 100 ml per bag of cement &

recon 3 s fiber at 125 gm per bag of cement including

making C channel 75 x 75 mm required to maintain

level,slope and thickness of the concrete road leveling

of placed concrete with surface vibrator and finishing

with power floater & trowel light brooming the

surface & including Construction joints to be formed

at every 5 mt distance by grooving with mechanical

saw within 48 hrs. Groove/sawed joints shall be made

of 5 mm width and depth min (1/3 rd depth of the

pavement) as shown in the drawing and shall be filled

with ready to use PU sealant of UV gradecutting &

150 Providing and fixing pre-cast concrete kerb stone of 980.00 Rmt 374.92

gray cement based concrete block 30cm length,30cm

height and 15cm thick of M250 grade concret as per

approved design

and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

151 Road marking with hot applied thermoplastic paints 432.15 Smt 367.72

with reflectorising glass beads on bitumin surface

providing and laying a hot applied thermoplastic

compound 2.5 mm thick including reflectorising glass

beads @ 250gms per Smt area, thickness of 2.5mm is

excluding of surface applied glass beds as per IRC:35-

2015. The finished surface to be level, uniform and

free from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white color

marking should provide liminance coefficinet on

cemend road shalll be min 130 mcd/m2/lux and

Asphalt road shall be min 100 mcd/m2/lux during the

service life during the day time. The marking should

meet the performance criteria for night time

reflectivity, wet reflectivity and skid resistance as

mentioned in the section-15 of IRC 35-2015. Warranty

for the Retro reflectivity should be two years.

Item Rate In

Description of Item Quantity Unit Amount

No figures

152 Providing and fixing in position Children Playground 3.00 No 37748.75

Equipment ROTO/LLDP wave slide of length 13' 6" x

2'5" x 5' with main support pipe 76 OD GI A classm

supporting pipe 27 OD GI A class, ladder 25x50 &

connecting pipes 33 OD including making foundation

in plain cement concrete etc. complete as directed by

engineer in-charge.

153 Providing and fixing in position Children Playground 2.00 No 33102.75

Equipment Marry Go Round Platform type 4' x 4' x

size having base FRP with inbuilt moulding 32x32

pipes, hand railing 33 OD pipe including making

foundation in plain cement concrete etc. complete as

directed by engineer in-charge

154 Providing and fixing in position Double Swing A type 4.00 No 34264.25

double swing 8' x 5' x 8' having main pipe 76 OD A

class, Top Pipe 60 OD GI A class, All GI pipes powder

coated, seating rubber belt, rubber coated chains with

6 mm link including making foundation in plain

cement concrete etc. complete as directed by engineer

in-charge.

155 Providing and fixing in position Double See Sow 8' x 4' 2.00 No 31941.25

x 3' having bottom frame 60 OD GI A class pipe

mechanism 40x80 box pipe, seating 76 OD GI A class

LLDPE seats, handle 27 OD GI A class pipe including

making foundation in plain cement concrete etc.

complete as directed by engineer in-charge.

156 Providing and fixing ISI marked CI D/F sluice valves 4.00 No 8600.15

as per IS 14846 (lattest edition) of following class and

diameter including all taxes, insurance,

transportation, feight charges, octroi, inspection

charges, loading, unloading, conveyance to the

department store or site etc. complete. (150 mm dia)

157 Providing and fixing 150mm diameter non return 4.00 No 12407.85

valve with gunmetal working parts as per IS including.

158 Providing and fixing ISI marked CI D/F sluice valves 4.00 No 5238.87

as per IS 14846 (lattest edition) of following class and

diameter including all taxes, insurance,

transportation, feight charges, octroi, inspection

charges, loading, unloading, conveyance to the

department store or site etc. complete. (100 mm dia)

159 Providing and fixing 100mm diameter non return 12.00 No 8961.23

valve with gunmetal working parts as per IS including.

160 Providing and fixing 63mm Gun metal / SS single 44.00 No 8928.40

outlet type hydrant valve as per IS 5290 with ISI

marked 75 mm inlet and 63mm female instantaneous

coupling rubber washer and cast iron hand wheel

operation with close and open direction as directed.

161 Providing and fixing 63mm dia Gun metal /SS branch 44.00 No 4464.20

pipe of standard length with 20mm bore hexagonal

nozzle as per IS 903 with ISI marked as directed.

Item Rate In

Description of Item Quantity Unit Amount

No figures

162 Providing and fixing 63mm Parole fire hose of 44.00 No 9847.50

approved brand conforming to IS 636 type B having

crushing pressure of 37.20 kg/cm 2 of ISI marked of

15 mtr length fitting with necessary S.S 63mm

delivery hose coupling as IS 903 with ISI mark bided

with GI wire etc complete directed.

163 Mild steel box hose cabinet of 18SWG of suitable size 44.00 No 4090.00

with looking arrangement and 3mm thick glass panel

to accommodate 1 Nos of hose pipe (15mtr) and 1 No.

GM / SS branch pipe etc painting red colors etc as

164 Providing and fixing first aid hose reel wall mounting 36.00 No 11423.10

fix type having side of the hose reel made of MS

providing with 30mtr long thousand six length 25mm

dia PVC nylon braided flexible hose with S.S shut off

nozzle of approved quality etc complete as directed.

165 supplying and installing and conmissing of CI flanged 2.00 No 33427.97

Y type Strainer with SS mesh suitable flanges, nuts,

bolts, gasskets, etc complete. For 200 mm pipe suction

166 Providing dry chemical powder type fire 60.00 No 3479.45

extinguishers of 5 kg/Capacity with ISI mark (IS 2171)

etc as directed.

167 Providing carbon dioxide type fire ext 4.5KG capacity 60.00 No 7681.05

with ISI mark

168 Wrapping and coating of 150 mm / 100mm MS pipe 400.00 Rmt 525.20

as per direction of engineer incharge for protection of

MS pipe from the corrosion.

169 Design, supply & installation of safety signage made of 48.00 Smt 3085.55

zinc base glow in the dark rigid sheet with high

luminous with pasted on 3 mm thick on rigid PVC

foam sheet. Such as EXIT EMERGENCY EXIT. Do not

use lift etc.

170 supplying and installing Pressure gauge for Entire 4.00 No 1886.78

System with required fittings as per direction of

engineer incharge.

171 Supply installing Testing & Commissioning of Fire 4.00 no 36764.00

Alram System with Manual Call Point at eache floor

(G+7) with Hotter and Panel System Set at ground

floor including cost of all wiring.

172 Providing and fixing 65mm diameter non return valve 16.00 No 7146.13

with required acessoriesfor UGWT Pump connection

with all required aceessories, solutions etc. complete

173 Prviding and fixing quartzoind bulbty pe ss sprinkler 120.00 No. 638.83

head suitable sustaining pessure on seat and water

hamer effect. The type and temperature rating shall

be as follows

(a) 57 degree sprinkler

174 Providing and fixing 100mm diameter wefer plate non 4.00 No. 3798.11

return valve with CI Body and SS Plate working parts

as per IS including.

175 Providing and fixing in postion 25 mm ball valve to be 36.00 No. 673.67

fixed in Hose Real

176 Providing and fixing 80mm diameter non return valve 2.00 No. 5795.89

with CI Body and SS Plate working parts as per IS

including.

Item Rate In

Description of Item Quantity Unit Amount

No figures

177 Supply, installation and testing and commissioning of 2.00 No. 13566.32

SS - 4 way Fire Brigade in let connection with 63 mm

instantaneous coupling with isolation valve, plug, cap,

chain complete in all respect etc. complete

178 Providing and fixing Hose Clamp to be fixed in Hose 36.00 No. 145.19

Real connection etc. complete

179 Providing and fixing Hose Coller to be fixed in Hose 36.00 No. 580.75

Real connection etc. complete

180 Providing MS air cushion tank on top of each riser 2.00 No. 46576.15

fabricated from 6mm thick MS plate, 300 mm in

diameter and 1.5 m in height with dished ends

fabricated from 8mm thick MS plate with Air

release valve with stop cock, flanged inlet connection

and drain arrangement with 25mm dia valve,

pressure gauge with gun metal stop cock complete

with all accessories as required and conforming to IS

4736-1968. (The cushion tank should be suitable for

rated working pressure.)

181 Fixing, testing & commissioning of MS air cushion tank 2.00 No. 3554.19

on top of each riser fabricated from 6mm thick MS

plate, 300 mm in diameter and 1.5 m in height with

dished ends fabricated from 8mm thick MS plate

with Air release valve with stop cock, flanged inlet

connection and drain arrangement with 25mm dia

valve, pressure gauge with gun metal stop cock

complete with all accessories as required and

conforming to IS 4736-1968.

182 Providing Foot Valve of of 4" diameter approved 2.00 No. 22962.86

make including all required accessories etc. complete

183 Installing, testing and comissioning 4" Foot Valve 2.00 No. 714.32

including all required accessories etc. complete

184 Providing Foot Valve of of 6" diameter approved 4.00 No. 32754.30

make including all required accessories etc. complete

185 Installing, testing and comissioning 6" Foot Valve 4.00 No. 789.82

including all required accessories etc. complete

186 P & Fixing GI Air Release Valve 25 mm set including 4.00 No. 3647.11

all required accessories etc. complete

187 Supply , installation , testing & commissioning of SS 2.00 No. 5765.69

304 25 mm Pressure Safety / Relief Valve Range 0 -

12 Kg. / Cm2 complete with all accessories

Item Rate In

Description of Item Quantity Unit Amount

No figures

188 Supply, fabrication & erection of aboveground G.I. 'C'- 20.00 Rmt 5168.68

Class, ERW piping, conforming to IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 3589, for size 200 mm dia. above, flanges, nuts

bolts & washers, 3 mm thick gasket, pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the system

pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

200 mm dia.

189 Supply, fabrication & erection of aboveground G.I. 'C'- 400.00 Rmt 3745.84

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class 150mm dia., thickness. G.I. pipe fitting's

as per IS: 1239, part-II, Heavy class for size 150mm

dia. , flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the system

pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

150 mm dia.

190 Supply, fabrication & erection of aboveground G.I. 'C'- 226.00 Rmt 2723.72

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class 100mm dia., thickness. G.I. pipe fitting's

as per IS: 1239, part-II, Heavy class for size 100 mm

dia. , flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the system

pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

100 mm dia.

191 Supply, fabrication & erection of aboveground G.I. 'C'- 240.00 Rmt 1991.97

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class 80mm dia., thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 80 mm dia.

flanges, nuts bolts & washers, 3 mm thick gasket, pipe

hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the system

pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

80 mm dia.

Item Rate In

Description of Item Quantity Unit Amount

No figures

192 Supply, fabrication & erection of aboveground G.I. 'C'- 160.00 Rmt 1817.75

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class 65mm dia., thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 65 mm dia.

flanges, nuts bolts & washers, 3 mm thick gasket, pipe

hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the system

pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

193 Supply, fabrication & erection of aboveground G.I. 'C'- 180.00 Rmt 1335.73

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class 50mm dia., thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 50 mm dia.

flanges, nuts bolts & washers, 3 mm thick gasket, pipe

hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the system

pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

50 mm dia.

194 Supply, fabrication & erection of aboveground G.I. 'C'- 660.00 Rmt 656.25

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class 40mm dia., thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 40 mm dia.

flanges, nuts bolts & washers, 3 mm thick gasket, pipe

hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the system

pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

195 Supply, installation and testing and commissioning of 4.00 No 5122.22

SS - one way Fire Brigade in let connection with

mm instantaneous coupling with isolation valve, plug,

cap, chain complete in all respect etc. complete

196 5 kg Moduler Fire Extinguisher (Gr. Floor Electrical 12.00 No 3348.30

Room) including all required accessories etc.

Total A

Item Rate In

Description of Item Quantity Unit Amount

No figures

197 Point wiring for Light / Bell with 2-1.5 sq.mm & 1676.00 pts 611.91

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLSH PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector

as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Cat. III

198 Point wiring for Light / Bell with 2-1.5 sq.mm & 336.00 pts 305.95

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLSH PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector

as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Cat. III

199 Point wiring for FAN with 2-1.5 sq.mm & earth wire 565.00 pts 849.46

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLSH PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

200 Point wiring for on board Looped Plug with 6A 1461.00 pts 309.06

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories Cat. III

201 Providing following type of Modular Type Accessories 1232.00 nos 151.50

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed

by Engineer In charge. (1)One No. SP 6 Amp. Cat.III

Item Rate In

Description of Item Quantity Unit Amount

No figures

202 Providing following type of Modular Type Accessories 1232.00 nos 151.50

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed

by Engineer In charge. (2) One No 5 pin plug Cat.III

203 Providing following type of Modular Type Accessories 112.00 nos 160.59

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed

by Engineer In charge. (4) TV Co-axial Socket outlet

204 Providing following type of Modular Type Accessories 1120.00 nos 25.25

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed

by Engineer In charge. (7) Blank Plate Single Cat.III

205 Providing following type of Modular Type Accessories 896.00 nos 180.79

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed

by Engineer In charge. (9) 16 Amp. SP one way switch

206 Providing following type of Modular Type Accessories 896.00 nos 199.98

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed

by Engineer In charge. (10) 6/16Amp. Universal

socket Cat.III

207 Providing and erecting ISI mark Medium class RIGID 2240.00 mtr 24.24

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved

manner as directed (a)20 mm

208 Providing & erecting PVC Corrugated Flexible Conduit 40.00 mtr 17.17

with required nos. of coupling, PVC bushes, Check-

nuts etc. complete of following sizes. (1) 20 mm

209 Providing and erecting Mains with 1.1 KV grade 10161.00 mtr 82.72

FRLSH PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLSH PVC insulated stranded wire

of green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Item Rate In

Description of Item Quantity Unit Amount

No figures

210 Providing and erecting Mains with 1.1 KV grade 8896.00 mtr 109.23

FRLSH PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLSH PVC insulated stranded wire

of green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. Mm

211 Providing and erecting Mains with 1.1 KV grade 5376.00 mtr 147.41

FRLSh PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected

in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLSH PVC insulated stranded wire of

green colour for earth continuity of following size (A)

With medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. Mm

212 Providing and erecting Mains with 1.1 KV grade 3920.00 mtr 342.54

FRLSH PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected

in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLSH PVC insulated stranded wire of

green colour for earth continuity of following size (A)

With medium class Rigid PVC pipe and accessories

(h) 4 wire 6 sq. mm

213 Supplying and erecting Flexible PVC insulated multi 686.00 mtr 58.58

strand multi core 1.1 kv grade ISI marked copper

wires of following size to be erected as directed.(e)

1.50 Sq.mm 3 core round PVC sheathed

214 Providing and erecting Mains with ISI marked, 1.5KV 220.00 mtr 70.70

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if

required. (e) One wire 6.00 sq. mm

215 Providing and erecting Mains with ISI marked, 1.5KV 120.00 mtr 115.14

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if

required. (f) One wire 10.00 sq. Mm

216 Providing and erecting Mains with ISI marked, 1.5KV 20.00 mtr 376.73

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if

required. (i) One wire 35.00 sq. mm

Item Rate In

Description of Item Quantity Unit Amount

No figures

217 Providing and erecting Mains with ISI marked, 1.5KV 26.00 mtr 588.83

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if

required. (j) One wire 50.00 sq. mm

218 Providing & Erecting approved make following size of 2464.00 mtr 39.39

TV Co-axial flexible cable comprising inner conductor

of solid bare copper insulated with Foam PE &

Secondary conductor made of poly - Aluminium film

bonded Al. Braids @ suitable coverage overall

sheathed with black PVC insulation. (b) RG-6

219 Providing & Erecting 3mm thick Polycarbonate (PC) 2800.00 sq.inch 3.03

sheet with grooving as directed

220 Providing and erecting Decorative call bell Ting-tong 112.00 nos 71.71

box type 250 volts complete erected

221 Supplying and erecting LED indoor fittings with LEDs 786.00 nos 373.70

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

shown.) (A) Tube Light with integral driver (iv) 22-24

Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll

222 Supplying and erecting led lamps with following 1120.00 nos 188.87

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED

Lamps integral type, with PC diffuser suitable LAMP

holder (iii) 10 to 15 watts cat-III

Item Rate In

Description of Item Quantity Unit Amount

No figures

223 Supplying and erecting LED street light / Flood light 41.00 nos 4248.06

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminium housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 &

LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The

between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (ii)

48 - 59 Watts Cat-lll

224 Supplying and erecting LED street light / Flood light 2.00 nos 4096.56

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

%.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

between the ranges shown.) (C) Post Top Lantern LED

fitting comprises of finish cast aluminum spigot and

spun aluminum canopy fixed with opal polycarbonate,

pipe arrangement for vertical mounting driver and

accessories wired upto terminal block.IP 65 (ii)32-

40W Cat-lll

225 Providing and erecting Approved make Four pole 9.00 nos 6790.23

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal current

rating up to 25 A to 100A. with Fixed thermal &

magnetic release suitable to work on A.C. supply

c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

Item Rate In

Description of Item Quantity Unit Amount

No figures

226 Providing and erecting Approved make Four pole 4.00 nos 8861.74

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal current

rating 125A. with Fixed thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of

ICU only Cat III

227 Providing and erecting Approved make Four pole 1.00 nos 17843.67

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal &

magnetic release suitable to work on A.C.supply

Hz. with all internal connections, spreader tinned

copper & complete erected in existing

G.M.S.housing ICS=100% of ICU only Cat

228 Providing and erecting Approved make Four pole 2.00 nos 23041.13

moulded case circuit breaker having breaking

capacity ICU of 35 KA. and above at 415 V . having

normal current rating 250A. with variable thermal &

magnetic release suitable to work on A.C.supply

Hz. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

229 Providing and erecting Approved make Four pole 1.00 nos 25345.24

moulded case circuit breaker having breaking

capacity ICU of 35 KA. and above at 415 V . having

normal current rating 250A. with variable thermal &

magnetic release suitable to work on A.C.supply

Hz. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

230 Providing and erecting Approved make Earth fault 9.00 nos 5156.05

Relay suitable to mount with inter connection suitable

to following size of moulded case circuit breaker

having CT ratio & MCCB rating as following along

with shunt trip 220V AC. with all internal connections

& complete erected in existing M.S.housing.. (1) 15 A -

100 A , CT Ratio 1/100

231 Providing and erecting Approved make Earth fault 5.00 nos 5482.28

Relay suitable to mount with inter connection suitable

to following size of moulded case circuit breaker

having CT ratio & MCCB rating as following along

with shunt trip 220V AC. with all internal connections

& complete erected in existing M.S.housing. (2) 125 A

-200 A , CT Ratio 1/200

232 Providing and erecting Approved make Earth fault 3.00 nos 5956.98

Relay suitable to mount with inter connection suitable

to following size of moulded case circuit breaker

having CT ratio & MCCB rating as following along

with shunt trip 220V AC. with all internal connections

& complete erected in existing M.S.housing. (3) 250 A

-400 A , CT Ratio 1/400

Item Rate In

Description of Item Quantity Unit Amount

No figures

233 Supplying & erecting approved make Four Pole 415V 2.00 nos 2611.86

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

(A)32-40A Cat-lll

234 Supplying and erecting triple pole & neutral 440V / 1.50 Rn. 1961.42

500V panel mounting Copper Busbars with four equal Mtr.

Nos. of electrolyte bus having current density not

more than 1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating

tape for phase sequence of following current carrying

capacity, erected with necessary bus bar supports

/insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.

(A) Suitable for 100 Amp. Capacity

235 Supplying and erecting triple pole & neutral 440V / 3.00 Rn. 3202.71

500V panel mounting Copper Busbars with four equal Mtr.

Nos. of electrolyte bus having current density not

more than 1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating

tape for phase sequence of following current carrying

capacity, erected with necessary bus bar supports

/insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.

(B) Suitable for 200 Amp. capacity

236 Supplying and erecting triple pole & neutral 440V / 2.00 Rn. 4909.61

500V panel mounting Copper Busbars with four equal Mtr.

Nos. of electrolyte bus having current density not

more than 1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating

tape for phase sequence of following current carrying

capacity, erected with necessary bus bar supports

/insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.

(C) Suitable for 300 Amp. capacity

237 Providing and erecting Miniature circuit breaker 1426.00 nos 123.22

single pole 6A to 25A suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996

with ISI Mark Cat.III

238 Providing & erecting 240 V MCB double pole switch 252.00 nos 329.26

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity (A) 6 to 32 Amp.

239 Providing & erecting 415 V MCB Four Pole for Motor 8.00 Nos 736.29

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (b)40 Amp. Cat.III

240 Providing & erecting 415 V MCB Four Pole for Motor 224.00 Nos 655.49

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (a) 6 to 32 Amp. Cat.III

Item Rate In

Description of Item Quantity Unit Amount

No figures

241 Providing & erecting 415 V MCB Four Pole for Motor 19.00 Nos 811.03

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (c)63 Amp. Cat.III

242 Providing and erecting Sheet Steel powder coated 112.00 nos 355.52

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used)

suitable for(A) single phase incoming and horizontal

single phase outgoing (b) sheet steel double door (IP-

243 Providing and erecting Sheet Steel powder coated 12.00 nos 1680.64

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used)

suitable for (A) single phase incoming and horizontal

single phase outgoing (b) sheet steel double door (IP-

244 Providing and erecting Sheet Steel powder coated 112.00 nos 2339.16

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used)

suitable for (B) three phase incoming and single

phase horizontal type outgoing Per phase isolation

type (PPI) (b) sheet steel double door (IP-43) (i)4

245 Providing and erecting Approved make RCCBs 348.00 nos 2458.34

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

having characteristic of quick action & tripping with

all advance feature & do not incorporate any

electronic component. for following Max. rating

erected as directed (ii) 40Amps. DP Cat. III

246 Providing and erecting Approved make RCCBs 1.00 nos 2825.98

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

having characteristic of quick action & tripping with

all advance feature & do not incorporate any

electronic component. for following Max. rating

erected as directed (i) 25 Amps.FP Cat. III

247 Providing and erecting Approved make RCCBs 10.00 nos 4745.99

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

having characteristic of quick action & tripping with

all advance feature & do not incorporate any

electronic component. for following Max. rating

erected as directed (iv) 100 Amps. FP (100 mA

Sensitivity) Cat. III

Item Rate In

Description of Item Quantity Unit Amount

No figures

248 Providing and erecting HOT deep Galvanised iron 49.00 kg 77.77

strip wire 8 to 16 SWG.

249 Supplying & erecting earth pit of minimum bore 14.00 nos 4591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make

OEM has to submit test certificate including value of

earth resistance of installation duly stamped and

signed by agency and officer Incharge has to ensure

the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:-

ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time

Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

250 Providing & erecting weather proof, dust & vermin 5.60 Sq. Mtr. 14902.55

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch

gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and

rubber gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates

excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding

base beams) The panel shall be supplied with

following approved manufacturers with following

size. (B) The standard companies switch gear shall be

used and only manufacturers at CPRI approved

factory (i) with 350mm depth

Item Rate In

Description of Item Quantity Unit Amount

No figures

251 Providing , erecting , fabricating the M.S. structure as 100.00 kg 77.77

per requirement on site incorporating proper size of

M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide with

erection on site as per direction of engineer in charge

with necessary grouting, cementing, plastering &

finishing complete.

252 Providing and erecting multifunctional meter suitable 5.00 nos 14123.84

for application of Power monitoring and showing

measurement of following Voltage, Frequency,

Apparent energy, Apparent power, Active and reactive

energy, Active and reactive power, Average voltage

Vavg, Peak demand power PM, QM, SM, Demand

power P, Q, S, Apparent power S, S1, S2, S3, Unbalance

current, Power factor and displacement PF (signed,

four quadrant), Calculated neutral current, Active,

reactive, apparent energy (signed, four quadrant),

Active power P, P1, P2, P3, Voltage U21, U32, U13, V1,

V2, V3, Phase currents, Average current Iag, Peak

demand currents, Reactive power Q, Q1, Q2, Q3,

Demand current I1, I2, I3, [Us] rated supply voltage

40...300 V AC 45...65 Hz, 40...300 V DC, Network

frequency 50 Hz, Type of network 3P, Display type

segments LED, Display colour Red, Messages display

capacity 3 fields of 4 characters, Display digits

digit(s) - 14.2 mm in height

253 Providing and erecting FRLSH-XLPE(IS:7098)(I)-88 60.00 mtr 277.85

ISI armoured cable multistrand Aluminium conductor

for 1.1 kV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

NOTE 1 For use of FRLSH Cables in place of FRLS

Cables add 5% in Item

254 Providing and erecting FRLSH-XLPE(IS:7098)(I)-88 90.00 mtr 920.51

ISI armoured cable multistrand Aluminium conductor

for 1.1 kV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

NOTE 1 For use of FRLSH Cables in place of FRLS

Cables add 5% in Item

255 Providing and erecting FRLSH-XLPE (IS:7098)(I)-88 600.00 mtr 177.10

ISI armoured cable multistrand / Solid Aluminium

conductor for 1.1 kV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (C) 4 core 10 Sq. Mm NOTE

For use of FRLSH Cables in place of FRLS Cables add

5% in Item

256 Providing and erecting FRLSH-XLPE(IS:7098)(I)-88 400.00 mtr 888.70

ISI armoured cable multistrand Copper conductor

for 1.1 kV. to be laid on wall with necessary clamps

or in existing trench / pipe at road crossing or floor

of following size of cables. (A) 4 core 10 Sq. mm

Item Rate In

Description of Item Quantity Unit Amount

No figures

257 Making trench in soft soil of suitable width of 90 cm 440.00 mtr 55.55

deep for laying cable or locating the fault all over the

run and back filling the same and making the surface

as normal ground.

258 Making trench in Hard Murrum / Tar Road of suitable 60.00 mtr 432.28

width of 90 cm or required depth for laying any size

of cable or locating the fault all over the run and back

filling the same and making the surface as normal

ground. (B) If additional machinery like hammer

driller or JCB use [Add]

259 Drilling the road without breaking the road surface 60.00 mtr 492.88

(Asphalt) for laying of cable for feeding power supply

by making up to following size of holes at both ends

(A) Up to 100 mm bore dia

260 Providing & laying approved make Double walled 560.00 mtr 62.62

corrugated pipes (DWC) of polyethylene(conforming

to IS 14930 II )with necessary connecting accessories

of same material at required depth in existing trench

for laying of cable. below ground / road surface for

enclosing cable

(A)50 mm outer dia

261 Providing & laying approved make ISI marked HDPE 70.00 mtr 732.25

6Kg / cm2 (Class-3) as per IS:4984:1995 PE-80 to be

erected at road crossing on or floor as directed for

laying of cable. The pipes as following size of dia &

weight per 6 mtr. (F) 110 mm inner Dia.

262 Providing and, fixing heavy duty flange type brass 48.00 nos 38.38

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables. (C) 2 to

4 core 10 Sq. Mm

263 Providing and, fixing heavy duty flange type brass 8.00 nos 75.75

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of

cables. (B) 3 & 1/2 core 35/50 Sq. Mm

264 Providing and, fixing heavy duty flange type brass 2.00 nos 190.89

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of

cables. (F) 3 & 1/2 core 150 Sq. mm

265 Solder less crimping type Aluminium lugs conforming 80.00 nos 13.13

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (B) 10 Sq.mm

266 Solder less crimping type Aluminium lugs conforming 8.00 nos 15.15

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (C) 16/25 Sq.mm.

Item Rate In

Description of Item Quantity Unit Amount

No figures

267 Solder less crimping type Aluminium lugs conforming 24.00 nos 20.20

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (D) 35/50 Sq.mm.

268 Solder less crimping type Aluminium lugs conforming 2.00 nos 25.25

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (E) 70 Sq.mm.

269 Solder less crimping type Aluminium lugs conforming 6.00 nos 61.61

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (H) 150 Sq.mm.

270 Solder less crimping type Copper lugs conforming to 32.00 nos 10.10

IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner. (B) 10 Sq.mm

271 Providing & erecting Approved make Power Saving 45 452.00 nos 1948.29

- 50 Watt Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium

blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in

272 Supplying & erecting fan hook box of 10 mm M.S. 452.00 nos 108.07

round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge M.S.

box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

273 Providing 2.5mm.thick laminated acrylic sheet to 452.00 nos 18.18

cover the fan hook or Fan box.

274 Supplying and erecting approved make Octagonal pole 20.00 nos 7561.87

made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable termination to be

erected With Suitable foundation (Included) as per

details given by manufacturer considering site

requirement. (C) 5 Mtr. Long 70 mm Top X 130 mm

bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole

weight 46 kg

Item Rate In

Description of Item Quantity Unit Amount

No figures

275 Providing and erecting street light pole bracket 15.00 nos 614.08

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I sleeve

tubing of approx. 45cms.length and suitable for

mm / 80mm. / require size pole top having sufficient

fasteners for fixing the brackets and having spread of

1 mtr. length with suitable rise as per site condition &

suitable welded stiffener reducer and nipple with

check nut complete painted with one coat of Red oxide

/ PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms. [A] Single Arm

bracket 1 Mtr

276 Providing and erecting street light pole bracket 5.00 nos 829.21

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I sleeve

tubing of approx. 45cms.length and suitable for

mm / 80mm. / require size pole top having sufficient

fasteners for fixing the brackets and having spread of

1 mtr. length with suitable rise as per site condition &

suitable welded stiffener reducer and nipple with

check nut complete painted with one coat of Red oxide

/ PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms. [B] Double

Arm Bracket 1 Mtr

277 Supplying and erecting B class galvanised iron pipe 32 16.00 nos 343.40

mm outside dia 45 cm long duly welded on 20 cm x

cm x 3 mm thick M.S. base plate, erected on wall or

corner for mounting street light luminaire with

necessary hardware materials duly painted.

278 Supplying & erecting IP 55 grade following size 1.00 nos 1884.66

section pillar fabricated from joint less M.S. Sheet with

angle iron legs made from jointless M.S. Angle with

cable clamps to be buried in ground to have

appropriate erection to work uniform until erected

with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double

door internally supported on both side, with internal

and outside looking arrangement with lock and keys

in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos.

one is welded and other with nut and bolt for erecting

Bakelite sheet. Painting the Section Pillar inside and

out side with three tank powder coated paint. section

pillar roof should be without joint with water leakage

proof & tested as per IP 55 test & followed by IS

of 1962 (C) 60 X 30 X 45 cm section pillar fabricated

from 16 Gauge MS Sheet with angle iron legs 45 cm

long made from 35 X 35 X 5 mm thick MS angle.

279 Supplying and erecting HYLAM sheet on existing angle 1.00 Sq. Mtr. 1927.08

iron frame.for following thickness (E) 10mm

Item Rate In

Description of Item Quantity Unit Amount

No figures

280 Supplying & erecting approved make Digital time 1.00 nos 3168.37

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching

setup time 1 minimum & LCD display. Also comprised

permanent ON/OFF switching. Programming switches

& housed in fire proof thermoplastic enclosure &

transparent cover erected as required with necessary

connection erected as directed.

281 Supplying & erecting power contactor ,AC3 duty for 1.00 nos 2782.55

time switch complete erected as per direction Cat III

(D) 4 pole 440V 40 Amp.

282 Providing & erecting open well horizontal mono block 4.00 nos 53777.45

pump set with cast iron body, complete for three

phase submersible motor having [H] For 15 HP

phase open well horizontal mono block pump set

suitable for 1600 LPM to 1025 LPM @ 33 to 42 MTR

head suitable for 65 /80 mm dia delivery pipe Cat.II

283 Supplying & erecting approved make 3 phase motor 4.00 nos 15818.62

control cubical panel ( Star - Delta) made from16 G.

CRCA sheet duly painted with epoxy powder painted

inside and outside with hinged doors and locking

arrangement, consisting of suitable size of ON- OFF

isolator (AC - 3/23 duty) main fuses, single phasing

preventer cum water level. Guard (Complete unit),

Toggle switch to by pass Single phase preventer cum

WLG, indicating lamps for R- Y- B phases, over load

relay, Automatic water level controller, Ammeter &

incoming wires duly socket Crimped, Panel to be

erected on angle iron frame grouted on wall as

directed. Star Delta & main contactor, overload relay,

thermal / Electronic Star delta cutoff timer, start -

stop push buttons. The isolator overload relay &

contactors of L& T, Siemens or Cuttler Hamer make

only. Panel to be erected on angle iron frame ground

on wall. (D) S/D up to 15 HP

284 Supplying and erecting approved make3 phase motor 1.00 nos 61905.93

control panel (ATS) made from 16 G. CRCA sheet duly

painted with epoxy power paint inside and outside

with hinged doors and locking arrangement,

consisting, of suitable switch of AC 23 duty with HRC

fuses (Cat.III), starting and running contactors,

overload relay, Automatic water level controller,

Electronic timer with master timer CT operated

preventer , water level guard, over load, start, run and

stop push buttons, air cooled auto transformer with

60%, 70%, 80% tapping, Panel to be erected on angle

iron frame grouted on wall as directed., contactors

relays, timer etc. shall be of L & T Siemens / Cutler

Hammer make. (F) Suitable for 60 H.P.

Item Rate In

Description of Item Quantity Unit Amount

No figures

285 S.I.T.C. submersible pump set for bore of 200 mm. dia. 1.00 nos 129252.73

or more having 3 phase motor capacity about 50-55

H.P discharge capacity having . Lifting and Lowering

taken extra. (A) ( 13 Stage) 100 to 400 L.P.M.

discharge at the head 182 to 265 mtrs. suitable for

mm dia. Delivery pipe Cat.III

286 Lowering of submersible motor pump set at the depth 1.00 Per Job. 2996.67

of following ,complete with required. Nos. and size of

casing pipes erected by means of proper chain pulley

block & pipe wrenches after checking of threads of

each pipe with coupling to take the load of the pump

set and pipe assembly filled up with water (C)Above

287 Lowering of submersible motor pump set at the depth 4.00 Per Job. 1284.72

of following ,complete with required. Nos. and size of

casing pipes erected by means of proper chain pulley

block & pipe wrenches after checking of threads of

each pipe with coupling to take the load of the pump

set and pipe assembly filled up with water (D)For

Open well Horizontal submersible pump set for

sump well (ii) 7.5HP to 15 HP

288 Providing and erecting ISI marked PVC insulated PVC 406.00 mtr 172.71

Sheathed Flat flexible Submersible copper cable

approved make of following Size.

(D) 3 Core x 6 Sq. mm.

289 Providing and erecting ISI marked PVC insulated PVC 350.00 mtr 993.84

Sheathed Flat flexible Submersible copper cable

approved make of following Size.

(J) 3 Core x 35 Sq. mm

290 Providing Water proof straight Joint in PVC insulated 8.00 nos 189.88

flat flexible copper cable by using insulating material,

water proofing material, & making the joint complete.

291 Providing Water proof straight Joint in PVC insulated 1.00 nos 278.76

flat flexible copper cable by using insulating material,

water proofing material, & making the joint complete.

292 Supplying of following size of HEAVY UPVC column 300.00 Rmt. 698.92

pipe with coupler and wire lock [D] 80 mm dia

293 Supply of following size of TOP & BOTTOM 1.00 Per Set 3872.34

accessories i.e. Adaptor set (CI) long, pump guard set,

starter pipe Rubber ring for submersible pump &

UPVC column pipe as directed by Engineer - in -

charge with necessary plumbing as desired. [G]

294 Providing & erecting capacitor duty contactor 3 phase, 6.00 nos 3249.17

415 V with proper connection for following rating:

(D) 25 kVAR

295 SITC of Vertical Air Termination Solid aluminium with 24.00 nos 9416.23

Base- 10 mm dia and 1000 mm long. Air Termination

Base tested for conditioning, Ageing Test & Lightning

impulse current withstand test: 100 kA of 10/350µs

waveform in an accredited Third party laboratory as

per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST

34mm dia 3000 mm long- Cold Galvanized

Item Rate In

Description of Item Quantity Unit Amount

No figures

296 SITC of 8 mm dia solid Aluminium Conductor for roof 1400.00 mtr 299.97

top mesh grid and tested as per IEC 62561-

conducted in the Govt. accredited thirty party

laboratory to meet the requirement of IS/IEC

with Required Accessories - Aluminium Holding

clamp at every 1 mtr distance, Aluminium/SS cross

splicer at every crossing of Alu. conductor, Expansion

piece with connectors at every 20 mtr distance,

Aluminium straight Splicer to connect conductors. All

Accessories should be tested as per IEC 62561-1

2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for

Lightning impulse current withstand test: 100 kA of

10/350µs waveform(Ageing & Electrical test )

conducted in a sequence manner & tested in the Govt.

accredited Third party laboratory to meet the

requirements of IS/IEC

297 SITC of Galvanized Steel Flat 25x6 mm thickness from 144.00 mtr 154.53

earth electrode directly in ground as required. Zinc

coating: 500 g/m square (Approx:70 micron coating)

tested and used exclusively for lightning protection

earthing system and ring equipotential bonding.

298 SITC of 14.2 mm dia 3 mtr long Earth electrode of 24.00 Per set 5992.33

High tensile steel electrode with 250 micron copper

bonding & 1 bag of Carbon fill Based environment

friendly backfill tested as per IEC 62561-7 in NABL

accredited Laboratory and suitable stainless Steel

double sided clamp. Eco Friendly rust proof heavy

duty weather proof Polyethylene Earth Pit Chamber

with following dimensions :254 mm dia (top), 330 mm

dia (bottom) & 260 mm (height).

299 SITC and fixing of ACE mortar seal for fire penetration 16.00 Sq. Mtr. 23886.50

sealing system in floor opening for veritcal shafts &

wall opening FM approved class 4990.the mortar seal

shall have minimum 2 Hours fire resistant and

minimum thickness 100 mm.It should have been

tested at CBRI roorkee with following test in sequence

on same sample without any touchup or modification

during the test. Fire rated Foam and PVC

IntumescentWrapping systems.(1) Impact test 2.5 Kgs

Hammer, (2) water absorbtion test for 24 Hours, (3)

accelerated ageing for 168 Hours, (4) vibration test

for 4 hours, (5) fire resistant test as per standards

ASTME 814,UL-1479, IS 12458/2019, BS 476 PART

(Certificates of all standards are required), (6) hose

stream test. Manufacturer original batch test

certificate for physical properties to be submitted.

(HSN Code-381600)

300 (A) GENERAL DESCRIPTION OF LIFTS.

Item Rate In

Description of Item Quantity Unit Amount

No figures

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High

Starting torque Lift 3 phase 440 V A. C. Permanent

Magnet Synchronous motor of proper rating with high

efficiency shall be used.[2] Micro processor based /

PLC, ACVVVF, vector control drive with encoder

feedback closed loop system shall be used for lift car

and door operation which shall be full collective

UP/DOWN hall stops, Main, Up/ Down Contactor with

overload and phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate

size and to sustain the impact load cabin + passenger

with safety factor of fire for steel and side panels of

Stainless steel of sheet of grade 304 duty. Car ceiling

will be S.S. finishes with aesthetic appearance with

LED ceiling lights. Car flooring shall be of s/s

chaker plate design suggested of engineer in charge.

of engineer in charge. Car doors shall be of stainless

steel grade 304, hairline finish with centre opening /

telescopic automatic doors. Car panel will also be S.S.

304 finished with emergency stop device, mechanical

door safety device, facility of auto/ attended mode. All

car panel buttons and all floor switches must be with

brail language as per lift act.

[4] All landing doors must be fire rated for 2 hour

shall be fully automatic centre opening/ telescopic

opening made of hairline finish steel grade of

with key holes and infrared curtains with Unlocking

facility from outside

[5] Appropriate battery operated emergency light in

the car along with alarm switch shall be provided.

Also, Emergency Light & Fan should start immediately

without any Time Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down

arrow along with floor position indicator shall be

provided inside the car and at all floors.

[7] Full height infra red curtain with multiple cross /

crossing light beams shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided

accordingly of passenger capacity with Manual Rescue

Operation ( Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over

loading shall be provided such that doors kept open

till excess load is removed.

Item Rate In

Description of Item Quantity Unit Amount

No figures

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic

sleep timer shall be provided.

[12] Voice annunciator with suitable music shall be

provided in lift car.

[13] Self diagnostics system for operational and safety

parameters shall be provided in control panel.

[14] Mechanical over speed governor with governor

calibration as per actual site parameters and

submission of calibration certificate submission, door

key holes in the floor doors, fireman switch shall be

[15] Lift machine hoisting arrangement in the lift

machine room and monkey ladder for lift pit should

be provided by the lift agency, along with the other

steel structure works, foundations for the machine

[16] In the hoist way fascia plate shall be provided

without any extra cost, where ever required as / if

directed by engineer in charge.

[17] Permanent wiring with necessary safety devices

like RCCB in all circuit, Over Voltage Under Voltage

protection and THD eliminator in circuit for lift

machine room and lift well with proper numbers of

light points, with fixtures, exhaust fan and plug points

shall be provided by the agency. Only 3 phase Power

Supply shall be made available by department in lift

machine room. Necessary Earthing as per Lift

Act/Rules shall be arranged by Lift Agency.

[18] Any civil/ electrical works for additional and

alteration in lift shaft and machine room related to

erection of lift shall be made by lift agency without

any extra cost. (granite/marble fixing around all

landing door openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and

documents and liaison services for obtaining all

necessary permission from lift inspector and other

authorities. [20] acrylic transparent

licence/display A4 size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat

lift & escalator act 2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after

lift erection and provide report by third party

authorized by concern licensing authority 5.agency

has to provide third party insurance up to completion

of free maintenance period and submit the document

for the same.

Item Rate In

Description of Item Quantity Unit Amount

No figures

[21] Car Panel Operating Buttons at an accessible

height from wheelchair for handicapped person and

raised numbers with brail mark with floor position

indicator/buttons must be of Auto Glow type clearly

visible when view from inside cabin.

[22] For Physically Handicapped person Full Length

Handrails of hairline finish steel grade of 304 should

be provided at appropriate 900mm height on the

Rear & Side Wall Panels in Lift Car. [23] With

Necessary kVA rating voltage controlled Stabilizer

suitable for your controller, drive and all equipments

[24] Necessary rating of DP Elcb and FP Elcb required

for lift is in scope of work which rating is sugested by

CEICED Department (electrical Inspector)

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for

PREMIUM category

1. Advanced control system dual 64 bit embedded

microprocessor with CANBUS Serial Communication

mode including Regenerative power efficient

operation,on site programming facility, Anti nuisance,

Pte-opening, BMS/RMS with necessary online real

time monitoring system having necessary connectivity

for remote monitoring & other suitable supporting

hardware & software devices to fulfil the purpose.

2. Floor Indication LCD Display with call registration

& brail mark with arrival gong and hall lantern & TFT

Screen in the car with MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS Moonrock

finish / Hair Line / Honeycomb for car and all Doors,

All landing doors must have fire rating up to 2 hours

and car door must have multi-level crisscross beam

door protection.

4. To & fro communication system & wiring (i.e. car

control room & guard room ) and Each elevator are

equipped with remote monitoring system.agency has

to provide mobile app and user id and password for

monitoring

DESCRIPTION OF LIFT :

Supplying, Erecting, Testing & Commissioning the

passenger / stretcher lift having following main

4/5/6 Passengers, Ground plus 7 upper floors with

Rated Speed of 1.5 / 1.75 m/sec.,

(C) With General PLUS ADDITIONAL SPECIAL 8.00 Nos. 1890740.20

FEATURES attached herewith. Prem. Cat.

Total B

Total (A+B) Rs.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of

the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Item Rate In

Description of Item Quantity Unit Amount

No figures

In words In words

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

5 GST will be paid Extra as per Govt. amendment

Deputy Executive Engineer Executive Engineer

Capital Project Sub Division:11 Capital Project Division No

Gandhinagar Gandhinagar

Executive Engineer

C.P. Elect. Division

R&B Deptt., Ahmedabad.