Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹89.7 LAccepted-AOC 232 1 D SHIVLOK KANKARKHERA DISTT MEERUT UP PIN 250001 | MEERUT | MEERUT | UP | 250001 | 1 | Accepted-AOC Being the lowest bidder. | |
| 2 | 2₹93.3 L+₹3.6 L (3.98%)Rejected-AOC 160 PREM NAGAR BAREILLY | 2 | Rejected-AOC Being other than the lowest bidder. | |
| 3 | 3₹1.0 Cr+₹12.7 L (14.2%)Rejected-AOC | 3 | Rejected-AOC Being other than the lowest bidder. | |
| 4 | 4₹1.0 Cr+₹13.1 L (14.6%)Rejected-AOC H NO 74 TILIYAPUR CB GANJ BAREILLY UP 243502 | BAREILLY | BAREILLY | UTTAR PRADESH | 243502 | 4 | Rejected-AOC Being other than the lowest bidder. | |
| 5 | 5₹1.2 Cr+₹34.1 L (38.0%)Rejected-AOC H NO 769 SOUTH CIVIL LINES MUZAFFAR NAGAR UP | MUZAFFARNAGAR | MUZAFFARNAGAR | UTTAR PRADESH | 251001 | 5 | Rejected-AOC Being other than the lowest bidder. |
Tender Value
₹1.4 Cr
EMD Value
₹2.1 L
Closing Date
14 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bareilly
HEADQUARTERS, COMMANDER WORKS ENGINEER, MILITARY ENGINEER SERVICES, STATION ROAD, BAREILLY CANTT, PIN 243001
CA NO. CWE BLY / GE(E) / 17 OF 2022-23 AND/ALTN CUM SPL REPAIRS TO BLDG NO 157 GARUD MESS UNDER GE(E) BAREILLY
2022_MES_556698_1
8200/B/737/E8
Open Tender
Civil Works
Item Rate
270 days
Bareilly
Class B Category a(i) For Unenlisted Contractor - Meeting enlistment criteria of MES with regard to having satisfactory completed requisite value of work, Annual turnover, working capital , etc as mentioned in NIT.
6 documents required · 6 mandatory
₹1,000
GE ( E ) Bareilly
₹2.1 L
Yes
17 Dec 2022
10 Oct 2022
21 Nov 2022
10 Oct 2022
14 Nov 2022
31 Oct 2022
Amount
Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of RCC column, beams, staircases, landing,chajjas and similar suspended work of any description complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed.
Taking down shutter and refixing with easing in other opening of any description exc. 2 sqm complete all as specified and directed.
Taking down shutter and refixing with easing in same opening of any description exc. 1 sqm but n.exc 2 sqm each complete all as specified and directed.
All as per item No 12 above but exc 2 sqm complete all as specified and directed.
Taking down toughned glass door of any size /with sensor &refixing with sensor it to same or other opening to working condtion complete all as specified and directed.
Dismantling of 100mm bore cast iron/ PVC drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches complete all as specified and directed.
Dismantling of 75mm bore cast iron / pvc drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches complete all as specified and directed .
Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.
Taking up or down20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.
Dismantling water tanks exceeding 500 & n exc 1000 and removing to store of all retrieved material complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed
M & L 25 mm thick PCC 1:2:4 type B-1, using 12.5 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.
M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.
M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.
M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.
M&L for non skid ceramic tiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed
M&L for non skid ceramic tiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm on vertical surfaces etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed.
M & L 7 to 8mm thick glazed ceramic coloured tiles ( square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.
M&L for vitrified ceramic coloured/ double charged / ultra charged tiles 10 mm thick square/ rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in matching colour 5 mm thick epoxy filling in between tiling complete all as specified and directed.
S&F welded steel wire fabric weight n. exc. 4kg/sqm to wood or steel members complete all as specified and directed.
M&L for Vitrified Ceramic Dark shade/ Double charged / ultra charged tiles 10 mm thick square/ rectangular) polished area of each tile not exceeding 0.36 sqm as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.
M&L for vitrified ceramic coloured/ double charged / ultra charged tiles 10 mm thick square/ rectangular) polished area of each tile exceeding 0.42 sqm but not exceeding 1.00 in floors etc. set and jointed in neat cement slurry and pointed in matching colour 5 mm thick epoxy filling in between tiling complete all as spd and directed.
M&L for vitrified glazed ceramic coloured/ double charged / ultra charged tiles 10 mm thick square/ rectangular) polished area of each tile exceeding 0.42 sqm but not exceeding 1.00 in vertical surface etc. set and jointed in neat cement slurry and pointed in matching colour 5 mm thick epoxy filling in between tiling complete all as specified and directed.
M&L for vitrified ceramic exterior heavy duty out door coloured tiles 12 mm thick (Square/rectangular) polished area of each tile size not exceeding 0.36 sqm on floor set and jointed in neat cement mortar and pointed in white or coloured cement to match complete all as specified and directed.
M&L Machine cut kota stone slab flooring 16-18 mm thick over 20 mm thick screed bed laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and treating the surface complete complete all as specified and directed. (Note:Screed bed paid seprately)
M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L Green Marble of work 15-20mm thick (table rubbed and polished) in treads and riser and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.
M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .
M& L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed
M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for Machine pressed cement concrete factory made coloured glazed interlocking paver block any shape and size confirming to IS 15658 -2006 of 80mm thickness, M-30 Grade, machine pressed of pattern and colour as approved by GE complete all as specified and directed.
M&L for PCC (1:2:4) type B1 using 20mm graded agg for machine pressesd precast cement concrete kerb stone including weathering, slightly rounded or chemferred angles and throating , as directed edges complete including excavavtion for kerb stone complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in fdn, floors etc complete all as specified and directed.
M&L RCC 1:1.5:3 type B-1 (Nominal Mix) (using 20mm graded stone aggregate) as in foundation footing, Plinth, lintel / roof beam complete all as specified and directed.
M&L RCC 1:1.5:3 type B-1 (Nominal Mix) (using 20mm graded stone aggregate) Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L form work to chajja, weather shade, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed.
M&L flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter complete all as specified and directed.
M&L form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal rough finished surfaces in shape complete all as specified and directed.
M&L for reinforced cement concrete 1:1.5:3 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent , complete all as specified and directed. (reinforcement to be measured & paid under respective items).
Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed.
All as per item No 49 above but 6 to 8 mm complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
M& L for rendering 10mm thick in cement mortar (1:4), and 5 mm thick setting layer in CM1:3 finished even and smooth using extra cement to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed.(Note : Water proofing liquid shall be measured and paid separately)
supply only Integral water proofing Liquid complete all as specified and directed.
M&L rendering 10 mm thick in CM 1:4 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed
M&L Excavation in trenches not exe 1.5 m width or depth and getting out in any type of soil complete all as specified and directed.
Returning fillng in , including spreading , levelling , watering and well ramming in layers not exc 25cm complete all as specified and directed.
Removing excavated material n exc 50m and depositing where directed at a level n exc 1.50M above the starting point complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.
S & F in repair 1st class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
S&F 35 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .
S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, fitted with cut and mitred beadr for seating , any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. (Note :- S & F Glass/gauge shall be measured and paid for separately)
S&F magnet catch with striking plate including letting in and fixed, complete all as specified and directed.
S & F Floor door stopper of brass body and tongue with hard drawn steel spring. Fixed in floor complete all as specified and directed.
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing NOTE-Colour of pvc match to that of shutter complete all as specified and directed.
S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed
S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.00 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :95x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.
S & F for aluminium powder coated frame hollow sections members of size 63.50 mm x38mmx 1.48 mm thick,4 mm thick aluminium composite panel LDPE core with PET coating fixed with into the wall for kithen cabinet/ cupboard shelf incl hanging self for clothes with aluminium clip/strips, pvc beadings fixed with adhesive on edging , design as per site requirements basis, complete all neccessary fitting complete all as specified and directed.
S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm size aluminium handles, cast type anodised complete all as specified and directed.
S&F 100 mm size butt hinges medium weight colled rolled mild steel complete all as specified and directed.
S&F 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as specified and directed.
S&F 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed
S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed
S&F 1000 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.
S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed
S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed
S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed
S&F in Vitreous China table top wash basin of suitable size including SS bottle trap, HDPE waste pipe including fixing on counter with SS waste coupling complete all as specified and directed.
S&F in repairs Brass chromium plated moca wall mixer 3 in 1 fusion , 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed
S&F in repair fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes complete all as specified and directed.
S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified and directed.
S & F in repair fancy type 150mm size square brass CP shower rose complete all as specified and directed.
S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed.
S&F in repair fancy type 15mm dia brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB, complete all as specified and directed.
S&F in repair fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed. 2 Way Bib Cock with Wall Flange complete all as specified and directed.
S&F stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified and directed.
S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair fancy type brass chromium plated soap dish of size 14x14x8cm complete all as specified and directed.
S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed.
S&Fin repair fancy type stainless steel towel rack size 600mm X 300mm including apair of brass bracket complete all as specified and directed.
S&F chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed.
S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed.
S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified and directed.
S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair bib taps 15mm bore cast coper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.
S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed.
S&F in repair vitreous China coloured European type WC with "P" or "S" trap 1st quality including connection to drain and fixing bolts complete all as specified and directed.
S&F in repair rimless single piece WC with UF soft closed slim sheet cover,hinges,fixing,accesories ,accesseries sets and cistern fittings size 360X675X750mm, S trap 300 mm including making good to floor complete all as specified and directed.
S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .
S & F Brass CP health faucet with 8mm Dia 1.25 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body complete all as specified and directed.
S & F Brass CP Hand Shower with 8mm Dia 1.2 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body complete all as specified and directed.
S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.
S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.
S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.
S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
M&L for precast cement concrete louvres and jallies (type B0 1:2:4 using (12.5 mm graded aggregate) 25mm thick (measured solid) including fixing with all molding post frame complete all as specified and directed.. Note:- Design of RCC Jalli approved by GE
S&F in repairs 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets,crockery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complete all as specified and directed.
S & F PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed.
S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified and directed.
S & F Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed .
S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed
M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed.
M &L for PCC (1:2:4) type B-0 using 10/12.5 mm graded stone aggregrate laid over roof slab after applying cement slurry 3 kg/sqm for filling undulationations finished even and smooth without using extra cement complete all as specified and directed.
M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed. (Note : Water proofing liquid shall be measured and paid separately)
M & L for Post Construction anti termiteTreatmentAt points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.
M & L for Post Construction anti termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor complete all as specified and directed.
S&F Framed work as in ladders,gates,and starirs of angle or other section with gussets plates,rails,braces etc complete ,drilled for fixing of steel sheeting or other covering to be prepared or hanging or sliding with an including either hooks and hinges or steel hanging door fittings and fastening and fixing Fe 290 gde E-165 complete all specified and directed
S&F Plate girder or single stanchions,built up of one beam or channel section with flange plates, caps,bases. splices, angle brackets,cleats and other connections Fe 410gde complete all as specified and directed
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed.
M&L Pre-painted galvalume curved aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridge, fixed with self tapping screws complete all as specified and directed.
S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof ,wall etc complete all as specified and directed.
M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting exc 10cm and not exc 40cm girth in brick walls complete all as specified and directed.
Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposingthe reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical , apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx50 mm (10 mm gauge welded mesh ) & tack , securing with clips / blinding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and construction fibre as per manufacturer instruction cleaning & removing of waste meterial etc as dirply two coat of Water proofing liquid at interval of 8 hours cure for the surfaces complete all as specified and directed.
M&L for dubbing coat on exposed cement concrete 10 to 20 mm thick PCC 1:2:4 type B0 12.5 mm graded aggregrate incl micro concrete with chicken wire mess with water proofing liquid @200 ml per bag up to II nd floor roof level complete all as specified and directed.
M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.
M&L for preparation of old painted wooden or wood based surfaces of any description n.exc 10 cm in width or girth when unconnected with other painting or when painted in a diferent tint and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L French polishing on surface of any description ,width or girth incl cleaning and preparing the surface incl a coat of wood filler on old work with two coats French polishing complete all as specified and directed.
M&L for complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean ,free from dust ,loose paint etc by skilled labour and applying two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayer over one coat of wall care putty of 1mm thickness complete all as specified and directed. Note:-Application to be done through authorised applicator of manufacturer.
M&L for two coat OBD on newly plastered wall surface with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coat of wall care putty of 1mm thickness complete all as specified and directed. Note-Application to be done through authorised applicator of manufacturer .
M&L for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of white wash complete all as specified and directed.
M&L for complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean ,free from dust ,loose paint etc by skilled labour and applying two coat of cement base paint over a one coat of putty of 1mm thickness complete all as specified and directed.
M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.
Providing & fixing 10mm thick plaster of paris false ceiling bending as required shape with two coats of plastic emulsion paint over a coat of primer on decorated surfaces of ceiling including 26 gauge galvanished iron sheet 'C' shaped main member @750 mm C/C cross member 'U' shaped @450 mm c/c and perimeter of 'C' shaped GI wire mesh having aperture 6.5 mm with 26 gauge wire GI wire 6mm dia or more or FI 40x4mm thick for hanging arrangement with MS suspension.fastner spaced @ 450mm c/c in both direction the 'C' member shall be made out of not less than 90mm wide GI sheet strip and side tray as required of approximate size 3.5 Mtr height as required at site complete all as specified and directed.Note:- Design/pattern of false ceiling shall be as approved by GE
M&L for preparation of old/new plastered wall (For old Plastered wall- complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean ,free from dust ,loose paint etc by skilled labour)and applying two coats of Dust Resistant , Anti Algal weather proof exterior/internal emulsion paints(appex) by electric sprayers over a one coat of putty of 1mm thickness complete all as specified and directed.
M &L for 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to 605x605mm GI framework for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long icluding dismantling of old ceiling board with frame complete all as specified and directed.
S&F in repairs, wall mounted censor urinal size 370x315x620 mm with all fixing accessories complete all as specified and directed.
S&F 12 mm thick toughned glass door with powder coated aluminium frame including neccessary locking ,handle etc with double action floor spring in each shutter complete as requirement of site with suitable height and any type of eaching designed on tougned glass , off cuts complete with finishing wall in CM 1:4 , designed complete all as specified and directed
S&F 10-12 mm thick toughned glass partition wall with or without aluminium frame/CP rolling rod with any type of etching designed on toughned glass,of cuts complete as reqmt of site with arrangement for suitable height with offcuts complete all as specified and directed
M&L for dismantling of wall and ceiling boards(fiber,pulps,insulation etc ) or insulation boards /slabs any thickness including cover fillets complete all as specified and directed
M & L for prelam Solid PVC Wall Lining consisting of 5mm thick coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed
M & L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per complete all as specified and directed
Taking down copper/aluminum point wiring complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings, holders etc and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and directed.
Taking down electric meter and disconnecting, removing to store for keeping in safe custody for refixing etc complete all as specified and directed.
Taking down main switch / MCB DBS including MCBS etc of any size and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of wall, floors etc complete all as specified and directed.
Taking down Geyser and disconnecting water & electric connections, removing to store for keeping in safe custody for BER Board or rehanging etc after some minor repair complete all as specified and directed.
Taking down ceiling/exhaust fan and disconnecting, removing to store for keeping in safe custody for BER Board or rehanging etc after some minor repair complete all as specified and directed.
Taking dowm submainwiring/service cable including earth wire and removing from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of walls, floors complete all as specified and directed.
M & L for point wiring for modular fittings with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drawn through and including non metallic rigid PVC concealed conduit with all accessories and 1.5 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated ( green colour ) as continuity earth wire connected to common earth dolly and with metal flush box for mounting of modular fittings and cover plate( Metal box, inner & outer cover plate etc shall be measured and paid separately under respective items) incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for one light/fan/exhaust fan/bell point controlled by one modular switch/bell push complete all as specified and directed.
All as per item No 159 above but one 3 pin modular socket oultel 6 Amp on the same board with other switch.
All as per item No 159 above but one 3 pin Modular socket outlet 6 Amp independent.
All as per item No 159 above but for one light point controlled by two, 2-way 6Amps Modular switch.
All as per item No 159 above but one 3 pin Modular socket outlet 16 Amps independent with 2.5 Sqmm PVC insulated sheathed cable and 2.5Sqmm cable for earth wire.
S&F Modular Cover plate with frame 1 Module complete all as specified & directed.
S&F Modular Cover plates with frame 2Module complete all as specified & directed.
S&F Modular Cover plates with frame 3 Module complete all as specified & directed.
S&F Modular Cover plates with frame 4 Module complete all as specified & directed.
S&F Modular Cover plates with frame 6 Module complete all as specified & directed.
S&F Modular Cover plates with frame 8 Module complete all as specified & directed.
S&F Modular metal flush box 1/2 Module complete all as specified & directed.
S&F Modular metal flush box 3 Module complete all as specified & directed.
S&F Modular metal flush box 4 Module complete all as specified & directed.
S&F Modular metal flush box 6 Module complete all as specified & directed.
S&F Modular metal flush box 8 Module complete all as specified & directed.
S&F Modular switch piano flush type single pole one way 6 Amps complete all as specified and directed.
S&Fmodular switch piano flush type single pole two way 5 Amp. complete all as specified and directed.
S&F Modular Switch Piano flush type single pole one way 16 Amps.complete all as specified and directed.
S&F Bell Modular push flush type 5 Amp complete all as specified and directed.
S&F Modular Socket outlet 2 in 1, 3 pin 6 Amp flush type complete all as specified and directed.
S&F Modular socket outlet 2 in 1, 3 pin 5Amp and 16 Amp complete all as specified and directed.
S&F Bell AC 230 Volt single pole Ding Dong complete all as specified and directed.
S&F Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings complete all as specified and directed.
S&F ceiling roze, 3 terminals, PVC polycarbonate isolated body complete all as specified and directed..
S & F Lamp LED heat sink white with polycarbonate diffuser, B-22 base cap, retrofit type, 220/230 Volts,7/9 Watt complete.
S & F LED Tube light fittings1x 20 Watt ( T-8 ), 4' long, 220 Volts, AC decorative box type with driver,holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S & F LED Tube light fittings1x 10 Watt ( T-8 ), 2' long, Mirror type, 220 Volts, AC decorative box type with driver, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S & F LED Wall bracket type CITY-2 fitting 9 Watt complete all as specified and directed.
S & F Decorative wall mounting electric fixture with opal glass diffuser suitable with two Nos 9Watt LED complete all as specified and directed.
S &F surface mounting type LED ultra Ceiling light 1'X1', 18 Watt complete all as specified and directed.
S&F LED bulk head luminaire 10 watt with Engineering plastic housing and oval shaped with holder, clear prismatic diffuser,heat sink integrated including one no. 9Watt LED lamp complete all as specified and directed.
S &F LED luminaire 600x600 mm, 35/36 Watt, 220 Volts AC recessed/surface mounted type with high efficiency diffuser soft glare free light with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed.
S &F LED building security light fitting 25 Watt,230 Volts, AC outdoor type with high pressure die cast aluminium housing and heat resistant polycarbonate cover complete with driver, lamp & IP 65/66 protection complete all as specified and directed.
S&F in repairs stepped, (socket/switch type) electronic Modular fan regulator flush type, 180 Watt, 240 Volts on the existing phenolic laminated sheet complete all as specified and directed.
S & F Cable TV socket complete all as specified and directed.
S & F Telephone socket complete all as specified and directed.
S & F PVC non metallic conduit including all fittings such as tees, bends,mouth tube ends etc for laying cable for telephone & cable connection complete of size 25mm dia complete all as specified and directed.
Fixing only decorative ceiling fan complete all as specified and directed.
Fixing only exhaust fan any sweep complete all as specified and directed.
Install only Geyser, cleaning all dust etc from surfaces of any size, replacement unseviceable PVC connection including electric connection with three core flexible PVC insulated copper conductor multistranded cable 1.5 sqmm & suitable fastners/ nut bolts etc complete all as specified and directed.
Fixing only and connecting electric meter upto 25 Amp complete all as specified and directed.
M & L in replacement for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in & including PVC conduit complete all as specified and directed.
M & L in replacement for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through in & including PVC conduit complete all as specified and directed.
S&F in replacement single pole and neutral enclouser having IP -67 protection with a three pin & earth plug with socket complete and one SP, 20 A , 240 V MCB complete all as specified and directed
S&F sheet metal enclousers (DBS) when MCBs to be used 4way double door three phase & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F in replacement sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.
S&F in replacement MCB single phase and neutral 16A-63A, 230V 10KA. B' curve type complete all as specified and directed.
S&F in replacement MCB SP 6A-40A, 230V. 10KA. B' curve type complete all as specified and directed.
S & F in replacement GI bracket made out from GI pipe 25/32mm dia, 1.20 m long fixed on wall with and including nut, bolts and GI clamps of size 25x4mm as required & including painting etc complete.
Taking down service connection/UG cable removing of site complete all as specified and directed.
Excacvation in trenches not exc 1.5 mtr wide and n exc 1.5 mtr in depth for laying of electric cable or water pipe etc n exc 10 sqmm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Supply & laying sub class B bricks, well burnt , laid wirdth wise along the length of cable laid in trench over sand cushion laid for cable protection, complete all as specified and directed.
Material and labour for river washed and sreened, dry sand for filling in trench below and around the under ground cable for cushioning of cable etc, complete all as specified and directed.
Boring of holes under road or cutting the road/path/pavement/hard standing or any other situation by mannual means for 40mm bore GI pipe for crossing the cable and making good both the ends all as specified and directed. Note :- GI pipe shall be measured and paid separately under respective item.
Supply & fix tube 40mm bore light grade GI with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole/ across the road/path/culverts or laid in floor complete all as specified and directed.
Supply and lay cable XLPE insulated PVC armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor cross sectional area 25 Sq mm 4 Core complete all as specified and directed.
S&F MCB s three phase & neutral of size 100 Amp, 230V, 10KA, B curve type complete all as specified and directed.
M & L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts,check nuts, nuts and washers of GI or steel all as shown in electrical plate No 5 of SSR-I connected to earth test point by means of nut, bolts and washers made out of galvanised iron or steel all including earthing pit in PCC (1:3:6) type C1,RCC (1:2:4) type B1 precast cover slab with one handle made out of 8 mm dia round bar,20 mm dia (medium grade) protecation pipe and providing layer of charcoal or coke and salt in alternative layers,necessary earth work including testing complete all as specified and as directed. Note : Tenderers may note that amount of credit Rs 1,02,540.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.
Builders Harpal
TEAM ACC INFRABUILD PRIVATE LIMITED
Ikrar khan & co.
M/s Arihant Builders
Bidder Name
M/s Arihant Builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .