SPECIAL REPAIRS TO ROOF OF MAIN OFFICE BLDG NO P-183 AND PROVN OF SECURITY FENCING ON THE EXISTING PERIMETER BOUNDARY WALL AT ARMY RECRUITING OFFICE AND PROVN OF ROOF FALSE CEILING IN TWO ROOMS OF BLDG NO P-1 (OR LIVING ACCN MES IB) AT PANGODE MIL ST

Amount

Dismantling of single layer Mangalore pattern or similar tiles in roofing including ridge tiles etc complete all as specified and directed.

Dismantling wooden battens/fillets for tiles spacing exc 15 cm etc complete all as specified and directed.

Dismantling of timber scantlings 40 Sqcm and over in section as in unframed work in any position etc complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting, 0.50 mm thick, of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws or fixed with L or J type in lieu of screws etc complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheeting, as in ridges, hip, valey gutar etc, 0.50 mm thick, of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws or fixed with L or J type in lieu of screws etc complete all as specified and directed.

Dismantling of wall and ceiling boards or insulation boards any thickness including cover filletsetc complete all as specified and directed.

S&F Non Asbestos decorative type fibre cement building boards , 4 mm thick fixed or laid / inserted to timber / GI / Aluminum frame work with screws on ceiling etc complete all as specified and directed.

M&L For Anodised aluminum snap grid frame work for false ceiling size 605 x 605 mm etc complete all as specified and directed.

S&F Plain mild steel wire 2.0 to 2.5 mm dia galvanised class 3 in detached work sutch as hanging of ceiling etc complete all as specified and directed.

M&L 2nd class HW clean sawn fillets/battens for tiles sectional area exc 6 and n exc 13 sqcm incl creosote oiling etc complete all as specified and directed.

M&L 2nd class HW clean sawn fillets/battens for tiles sectional area exc 6 and n exc 13 sqcm except battens, any of the foregoing etc complete all as specified and directed.

M&L timber framed and fixed second class Hard Wood in scantling, clean sawn etc complete all as specified and directed.

M&L timber framed and fixed second class Hard Wood in scantling, clean sawn but except timber etc complete all as specified and directed.

S&F of mild steel section as in GI wind tie for roof incl securing bollts, all necessary drilling, bolting or riveting etc conforking to Fe 290 Gde E-165 etc complete all as specified and directed.

Taking down of cement plaster incl hacking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement plaster 1:4. finished even and smooth without using extra cement on external surfaces etc complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface in cement plaster 1:6. finished even and smooth without using extra cement on internal plaster etc complete all as specified and directed.

M & L for applying two coats of OBD on old surfaces of wall including preparation of old surfaces etc complete all as specified and directed.

M&L for Preparing new plastered surface,priming with chalk whiting and applying two coats of OBD on walls over a coat of primer etc complete all as specified and directed.

M&L for applying two coats of acrylic exterior emulsion water proofing painting over one coat of primer including prepartion of new surfaces of wall etc complete all as specified and directed.

Complete removal of existing surfaces of wall and Applying two coats of acrylic exterior emulsion water proofing painting over a coat of primer including prepartion of surfaces of wall etc complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame glazed with putty etc, complete all as specified and directed by Engr-in-Charge.

M&L sheet glass ordinery quality 3 mm thick and glazing with oil putty or wooden beads n.exc 0.50 sqm in each pane etc complete all as specified and directed.

M&L for preparation of old wooden surfaces and applying one coats of synthetic enemel paint etc complete all as specified and directed.

M&L for preparation of old steel surfaces and applying one coats of synthetic enemel paint etc complete all as specified and directed.

S&F in repair toilet paper holder fancy type chromium plated screwed down for fixing to walls with screws etc complete all as specified and directed.

S&F in repair chromium plated fancy type hand shower including fittings screwed down for fixing walls with screw etc complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe in repair complete all as specified and directed by Engr-in-charge.

S & F PVC connection 15mm dia 450 mm long with 2 Nos brass check nuts with washer etc in repair complete all as specified by Engr-in-charge.

S & F in repairs Stop valve 15 mm dia, fancy type chromium plated screwed down, high pressure with long shank and cup screwed both ends for unions and fixed, all as specified by Engineer -in-Charge.

S & F in repair Pillar taps 15mm dia fancy type with capstion heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts all as specified by Engr-in-charge.

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exc 1.50 Sqm but n. exc 4.0 Sqm each and refixing the same opening complete all as specified and directed by Engr-in-charge..

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, remov-ing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces for backing of tiles etc complete all as specified and directed.

M&L Vetrified ceramic light shade tiles 10mm thick (square/rectangular) polishe, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

All as per item 36 here-in before but as in skirting

M&L for 15 mm thick screed bed in cm 1:6 for laying floor finishes (Upto four storey building) etc complete all as specified and directed.

Demolition of concrete in ground floors and paving n exc 15 cm thickness (below or above groun level) etc complete all as specified and directed.

M&L 75mm thic cement concrete type C-2 1:3:6 (40mm graded aggr) as in plinth protection without using extra cement finishing cement concrete surface even and smooth etc complete all as specified and directed by Engr-in-charge.

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exc 1.50 Sqm but n. exc 4.0 Sqm each etc complete all as specified and directed.

S&F Aluminium door/window and partitions using poweder coated aluminum section, incl neccesary joining cleats glazing clips rubber neoprene packing handles aluminum snap bearing screws etc powder coating of any colour (thickness of powder coating minimum 50 micron) etc complete all as specified and as directed.

M&L Sheet glass ordinary quality and glazing with rubber neoprene packing in square exc 0.5 sqm in each pane 5.5 mm thick glass etc complete all as specified and directed.

S&F Aluminum anodised, barrel tower bolts of extruded section and fixed of 200mm long etc complete all as specified and directed.

S&F Aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminum alloy and fixed of 300mm long etc complete all as specified and directed.

S&F 100mm butt hinges, extruded aluminium with galvanised MS hinge pin, anodised and fixed Type B-21 etc complete all as specified and directed.

S & F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed ( Aluminium extruded section body) complete all as specified and directed by Engr-in-Charge.

S&F Extruded aluminium alloy handles, fabricated type, anodised,150 mm long etc complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor (Overall length of cover plate 150mm) etc complete all as specified and directed.

M&L for reinforced cement concrete type B1 1:2:4 (20mm graded aggregate) as in coping, etc and similar work etc complete all as specified and directed by Engr-in-charge.

M&L for Walling of random rubble stone masonry uncoursed, with best quality locally available harder stones such as granite, trap, basalt stone etc, well bonded, bedded and solidly hearted , built in cement mortar 1:6, complete all as specified and directed by Engr-in-charge.

S&F for MS work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, and in similar work conforming to FE 290 Gde E 165, etc complete all as specified and directed.

M&L renforced cement concrete (nominal mix type B-1 1:2:4 using 20mm graded aggregate in columns pillars piers, post and struts etc complete all as specified and directed.

M&L for Form work to side of pillars, posts, struts, piers, columns and stanchions, etc complete all as specified and directed.

S&F galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galavanised mild steel wire, staples or steel pins etc, all as specified and directed. (Note : Each line wire to be measured.)

M&L for Preparing new plastered or unplastered wall surfaces and applying two coats of cement base paint all as specified and directed.

M&L for Preparation of new steel surfaces of any description, over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L 15 mm thick plastering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement complete all as specified.

M&L 10 mm thick plastering in cement mortar 1:4 on concrete surfaces finished even and smooth (without using extra cement etc complete all as specified and directed.

M&L for Preparation of old steel surfaces of any description, over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc.etc complete all as specified and directed.

Point wiring complete for One light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded, copper conductor conforming to IS:694 drawn through and including non-metalic PVC conduit totally concealed in wall with recessed, pressed steel terminal boxes of suitable size, concealed etc, incl suitable thick modular cover plate for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly all as specified and directed NOTE: Cost of modular metal flush boxes with a coat of synthetic enamel paint over a coat of red oxide to steel surface to avoid rust, concealed in wall with suitable white cover plate for mounting switch/sockets, regulator, bell push etc and Cost of cutting chases & making good to distrubed surface with cement mortar, if required any shall be deemed to be included in the quoted rate Make: Havells or equivalent make of Finolex/Nicco/Plaza/Anchor/Polycab/RPG

All as per ser item No.62 above but for One fan point controlled by one way switch and regulator

All as per ser item No. 62 above but for One bell/buzzer point controlled by one bell push button independent.

All as per ser item No. 62 above but for one 5 Amps outlet on same board with other switches/sockets

All as per ser item No. 62 above but for one 5 Amps socket outlet on independent board.

All as per ser item No. 62 here in above but point wiring with 2.5 Sqmm FRLS cable and 2.5 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.

All as per ser item No. 62 here in above but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.

S&F modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed Make: Anchor / Havells/Legrand/Cona/Crabtree

S&F modular switch 1 way 16A, 240 volts, 1 module complete all as specified and directed Make: Anchor /Havells/Legrand/Cona/Crabtree

S&F modular fan step regulator, 120 W - 2 module, 240 Volts, 50 Hz, suitable for ceiling fan 1200 mm/1400 mm sweep all as directed Make: Anchor / Havells/Legrand/Cona/Crabtree

S&F modular bell push, one way, 6 Amps, 240 Volts, 1 module complete all as directed Make: Anchor /Havells/Legrand/Cona/Crabtree

S&F modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed Make: Anchor / Havells/Legrand/Cona/Crabtree

S&F modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as specified and directed Make: Anchor / Havells/Legrand/Cona/Crabtree

S&F Lamp holder angular type, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as directed Make: Anchor / Havells/Legrand/Cona/Crabtree

S&F buzzer, Ding Dong, AC, 240 Volts, single pole all as directed Make: Anchor or equivalent make of Havells/Legrand/Cona/Crabtree

S&F ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified Make: Anchor or equivalent make of Havells/Legrand/Cona/Crabtree

S&F sheet steel metal enclosure single pole & neutral with a 2 pin and earth plug and socket complete with one single pole MCB SP 20 Amp, 240 volts complete all as specified and directed. Make: Indo Asian or equivalent make of L&T/Legrand/Havells

M&L for distribution board, vertical, made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, VTPN 4 way, 415 volts grade with insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCCB, MCB TP/SPN/SP etc, including taking down existing unserviceable one and removing from site complete all as specified and directed Make: Legrand or equivalent in L&T/Indoasian/Havells

Supply and fixing MCCB triple pole and neutral (four pole) 100 Amps, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 25 KA including making incoming and outgoing connections complete all as specified and directed. Make: Legrand or equivalent in L&T/Indoasian/Havells

M&L for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 12 way, 240 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, including taking down existing unserviceable one and removing from site complete all as directed Make: Legrand or equivalent in L&T/Indoasian/Havells

S & F MCB single pole 5 to 32 Amps, 240 volt, 10 KA, C curve with IP-20 protected terminals including contact indication window for visual indication and safety of operator, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., complete all as specified and directed Make: Legrand or equivalent in L&T/Indoasian/Havells

All as per ser item No. 82 above but for MCB SPN 32 Amps

All as per ser item No. 82 above but for MCB TP 63 Amps

Supply and fixing sub main wiring with 4 runs of 6.0 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC FRLS conduit, medium grade, ISI marked, 20/25mm bore with conduit fittings and accessories concealed in wall/ceiling/floor including 2 runs run of 6.0 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete. NOTE: Foru runs of 6.0 sqmm copper cable and two run of 6.0 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length Make: RRKabel/Finolex/Plaza/Havells/Anchor/Finolex/V-Guard/MESCab

All as per ser item No.85 above but for sub main wiring with 2 run of 6 sqmm & 1 run of 6 sqmm as earth wire

Taking down carefully existing serviceable Ceiling fan/Wall mounted fan, ceiling cable end, etc., removing the fan for keeping in safe custody, hanging the ceiling fan with down rod after rewiring including clamps, hooks, holdfasteners etc and connecting up, including making electric connection from ceiling rose or connector to fan complete all as directed

Dismantling and taking down carefully existing serviceable tube light single/double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store for keeping in safe custody, refixing the same at its original location after wiring, including making electric connection from connector to light fittings & connecting up, testing the same for smooth operation complete all as specified and directed

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, double sided connection, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, including taking down existing unserviceable one and removing from site complete all as specified and directed. NOTE: LED tube light and LED batten fittings should be two different items. Make: Havells or equivalent make of Philips/Bajaj/Wipro/Osram/GE

Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make: Havells or equivalent make of Philips/Bajaj/Wipro/Osram/GE

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells or equivalent make of Philips/Bajaj/Wipro/Osram/GE

S&F LED roadway luminaries 35 Watt, 230 V AC outdoor type with epoxy black powder coated sheet, high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket of suitable size with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting complete and testing, including taking down existing unserviceable one and removing from site complete all as specified and directed. Make: Havells or equivalent make of Philips/Bajaj/Wipro/Osram/GE

M&L for Earthing complete in replacement with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts and washers of the earth and thimbles and other end of the earth strip connected to earthing test point and protected by galvanised iron pipe light grade 40mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade raised upto a level of 50cm above ground level with plug at top, earthing pit in PCC (1:3:6) type C-1 RCC pre-cast (1:2:4 type B-1) cover slab of 50 mm thick using 8.00mm dia CTD bars reinforcement both ways at 140 mm centre to centre with handle, 20 mm dia GI pipe medium grade for watering pipe, wire mesh, funnel and providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance n. exc. 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed.

DJ GROUP

M/S Vadakkeparambil Electro-Mechanic Service

R.K. Builders