Repairing of India Mark-II Hand Pump installed at various villages with providing of manpower, light / medium Four-wheeler commercial vehicle with Diver, POL, Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Ta. Mahudha, Mahemdavad, Matar, Nadiad, Vaso & Kheda of Kheda District for One Year

: Name Of Work :

Repairing of India Mark-II Hand Pump installed at various villages with providing of manpower, light

/ medium Four wheeler commercial vehicle with Diver, POL, Insurance, Fitness certificate, PUC etc.

including supply of Hand Pump spares as per IS 15500 with latest amendment and 32 mm NB ISI

marked medium duty GI Pipe in Ta. Mahudha, Mahemdavad, Matar, Nadiad, Vaso & Kheda of Kheda

District for One Year.

Executive Engineer,

Public Health Mechanical Division,

Gujarat Water Supply & Sewerage Board,

2ndFloor,JalBhavan,Ellis Bridge,

Ahmedabad-380006

Volume III: Price bid Page

NAME OF WORK:Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four-wheeler commercial vehicle with Diver, POL, Insurance, Fitness

certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment

and 32 mm NB ISI marked medium duty GI Pipe in Ta. Mahudha, Mahemdavad, Matar, Nadiad, Vaso

& Kheda of Kheda District for One Year.

Schedule showing the materialtobe supplied from the store of GWSSB for the

workcontracted to be executed at the rates at which they are to be charged.

Sr. Particulars Qty. RateRs. UnitDeliv Place of

No. ery Delivery

(1) The persons of firm submitting the Tender should see that rates in the above schedule are

filled up by the Executive Engineer, on the issue of formpriorto the submission of the

(2) Materials which are not included in Schedule 'A' but required for the work shall be brought

by the Contractor at his own cost.

(3) Carting of above materials should be done by contractor at his own cost.

(4) Contractor should return the balance materials, otherwise recovery at the double rates will

be affected in view of Clause 12.4.

(5) Contractor should return all the old dismantled materials other than concrete to dept. store

at his own cost, otherwise recovery will be made for non-return of old dismantled materials

atthe rate of current SORfrom contractor bill.

Signature of Contractor. Executive Engineer,

P.H.Mech. Division.

Volume III: Price bid Page

NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four wheeler commercial vehicle with Diver, POL, Insurance, Fitness

certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment

and 32 mm NB ISI marked medium duty GI Pipe in Ta. Mahudha, Mahemdavad, Matar, Nadiad, Vaso

& Kheda of Kheda District for One Year.

Qty. Rate Unit Amount

No. Particulars

Providing light commercial (medium) four

wheeler Diesel vehicle on rental basis for

one day (particularly for H.P repairing

works) with Driver & POL(Per day) (The

1 12 97682 Team/Year

vehicle shall be fully insured with fitness

certificate & PUC) with 01 Semi skilled

Labour (Per day) & 03 Unskilled Labour

(Per day) for year.

2 Handpump Spares

(A) SPARES FOR PUMP HEAD

Hexa. Bolts M-12x1.75x40mm

A-1 long with Hexa.Nut M-12x1.75 & 2000 5.56 Set

Washer 4mm thick

A-2 Hex. Bolt M10x1.50x40 mm long 250 2.58 No

A-3 Nylock Nut M10x1.50 250 1.72 No

A-4 Handle Axle(Stainless Steel) 200 73.92 No

Washer (4 mm thick) for Handle

A-6 Bearing (No.6204-Z) 350 27.63 No

A-7 Spacer(for pump Head) 200 4.26 No

A-8 Chain with Coupling 350 68.32 No

Bolt for front cover M-12x20

Pump Head Assly.Consi.of Item

No.(1) to (7) as per Fig.3.1

(B) SPARES FOR CYLINDER

B-1 Pump Bucket 750 4.63 No

B-2 Sealing Ring 1250 3.00 No

Upper Valve Assly comp.

B-3 consi.of item as per fig 3.6 A 60 357.50 Set

(Part no 1 to 4 & 8 to 9)

Lower Valve Assly comp.consi.of

B-4 item as per fig 3.6 B (Part no 5 to 60 201.25 Set

WATER TANK consi.of item as

per fig 3.6 B (1 to 6)

Volume III: Price bid Page

Cylinder With Brass Liner

consi.of item (a) & (b)

(E) REDUCER CAP 120 69.54 No

(F) Spares for Conne. Rods

Hexagonal Coupler M-12 x

UPPER VALVE ASSEMBLY

G-1 Upper Valve Seating 250 1.53 No

G-2 Plunger Yoke Body 25 111.25 No

G-3 Bucket Spacer 40 86.25 No

G-4 Follower 30 104.88 No

G-5 Plunger Rod (S & S) 50 87.58 No

G-6 Upper Valve (Guide) 50 47.50 No

LOWER VALVE ASSEMBLY

H-1 Check Valve Seat 30 80.66 No

H-2 Check Valve 35 66.25 No

H-3 Check Valve Seating 250 2.29 No

H-4 Rubber Seat Retainer 35 36.63 No

Handle Bar consisting of Item no

(1) & (3) as per Fig

Cylinder Assly Comp.consisting

(J) of Item no (1) to (7) as per Fig 40 1104.00 Set

Conn. Rod Electro

(K) Galva.consisting of Item no (1) 500 154.56 Set

to (3) as per Fig

Special Tool Kit for I. M.-II

Handpump Consi. Item (1) to

Part-8 with tool box

Standerd Tool Kit for I. M.-II

Handpump Consi. Item(1) to

Part-8 with tool box

Third plate consisting of Item (1)

& (2) as per fig

Spares for deep well Hand

pump-Extra Deep

Cylinder Body with Brass Liner

consisting of Item no (1) for

body fig 5.2 & (2)

for brass linear Fig 6.1 B

Handle Bar consisting of Item

no (1) to (3) as per Fig

Upper Valve Assembly complete

consisting of Item no (1) to (11)

Volume III: Price bid Page

O-4 Follower as per Fig 6.7 0 161.25 No

Bucket Spacer-Lower as per Fig

Manufacture Supply & Delivery of ISI

Marked 32 mm dia medium quality

galvanized mild steel tubes (Continuously

welded electric resistance welded

(ERW)/high frequency induction weled

(HFIW) /Hot finished welded (HFW) type

screwed at both ends to IS:554/ 1985 for

3 pipe suitable for water and gas 1500 211.86 Mtr.

application, socket on one end and other

end protected with plastic thread

protector in approximate length of 3 mtrs

conforming to IS:1239 (Part-I) 2004 With

latest amendment and socket to

conforming to IS:1239 (Part-II) 1992 With

latest amendment

Total Cost for one year

Total Cost for one year

1. Contractor has to keep Repairing Teams as per the Para no. 9 of the Information of Tender of

the Volume I (GCC).

2. Contractor has to keep number of manpower for each repairing team as per the condition no.

of the Special Condition of the Volume II (Technical Bid).

Payment will be made as per the deduction conditions mentioned in the Volume I (General Commercial

Terms Conditions).

I / We am / are willing to carry out work at ____ % ( in figure ) ___________________ (in words )

above / below the tendered estimated rates as mentioned above

Offer for Above Offer for Below

1. Estimate cost Rs: 20,65,002.00 1. Estimate cost Rs:20,65,002.00

2. Above:____ % Above Rs: _________ 2. Below:____ % below Rs:_________

3.Net amount Rs:_______________ 3.Net amount Rs:_______________

in words( in words(

Executive Engineer,

Signature of Contractor P.H. Mech. Division.

Volume III: Price bid Page

NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four wheeler commercial vehicle with Diver, POL, Insurance, Fitness

certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment

and 32 mm NB ISI marked medium duty GI Pipe in Ta. Mahudha, Mahemdavad, Matar, Nadiad,

Vaso & Kheda of Kheda District for One Year.

Payment Schedule for Spare and GI Pipe

Payment should be made as per actual consumption of material at the end of the month

after steps followed as per clause

Payment Schedule for Vehicle with Team

Payment should be made as per actual team with vehicle deployed by contractor per

month as per requirement or as per instructed Engineer in charge at the end of the month

after steps followed as per clause

Note: Penalty of 5% of bill amount will be imposed if agency fails to submit bill with necessary

documents by 10th of every month.

Signature of Contractor

Executive Engineer,

P.H. Mech. Division.

Volume III: Price bid Page