WBHD AE ESD III eNIQ 61, 25-26

Amount

Supply and Delivery of 3 ph. 440 V. 5 H.P. 50 Hz. submersible Pump Motor Set with 65 mm out let head 24-76 mtrs, Stage-8( KSB model no: BPD 262/08A+UMAI 150-6/22 1.5 sq.mm SD/ 4-Star.) (Kirlosker/CG)

Lowering the Submersible Pump-Motor set with uPVC coloum Pipe after making necessary arrengement for lowering the same with Co's own tools and tackles in deep tubewell

S & D at the site following uPVC 80 mm dia 3mtr long column pipe with both side square threaded (8 TPL) with one socket and ''O'' ring biax technology with wiring lock system non corrosive, High tensile having ISO 9001 Stranded Make- Ashirbad/Oriplast.

S & F round type M.S. Well cover plate including cutting 80 mm dia holes in middle for passing column pipe 1 no. 40 mm dia hole incl. welding 1 no socket in corner for entry of flat cable.( 1 no for existing tubewell )

S & F of 50 mm dia 400 mm long M.S. holding clamp for column pipe and pump including double nuts and bolts with washer also painting.

S & F 2.5 sq. mm. 3 core flat PVC coated copper submersible Motor cable (make - Finolex/ Glostar/Polycab) to be laid in existing GI protection pipe)

S & drawing 1.1 KV grade single core stranded 'FR' PVC insulated unshethed Cu. Wire (Finolex,RR Kabel,Havels) in heavy gauge polythene pipe dia 13 mm & 3 mm thick without earth continuity wire embedded in wall complete with all accessories incl. cutting the channel of 31 mm x 31 mm size on masonary wall and mending good the damages. z) 4 x 6 Sq. mm.+ 2 x 4 sqmm From L.T. panel to Existing starter

Cost for jointing the 3 core submersible flat cable including S/F water proof jointing materials.

Supply & Delivery 4 core 35 sq mm PVC/ Al armoured cable (Make:Havells/Gloster/KEI)

Laying of one No. cable upto 35 sqmm in underground trench 460mm wide x 760 mm average depth, with brick protection on thetop of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Supplying and fixing compression type gland for 4 core 35 sq. mm PVC / Al armoured cable complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry etc as per G.S.

Finishing the end of following XLPE/PVC armoured cable /wire by crimping method incl S & F solderless socket (dowels make) tapes, anticorrosive paste & jointing materials: i) 4 x 35 sq. mm PVC/Al armoured cable

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. ii) 4 x 6 sq. mm + 2 x 4 sq.mm copper wire

S/F 80 mm dia G.I. Flange

S&F of 80 mm dia GM Horizontal Check Valve/Non-return Valve (NRV) including jointing materials ( Make: Zoloto)

S&F of 80 mm dia Gate Valve screwed including jointing materials. (Leeder/Zoloto) GM

S&F of 50 mm dia full way Valve including jointing materials. ( Zoloto) (GM)

Tarnsportation charges for carrying the above materials tools and tackles etc. from Co's work shop to work site and back after completion of the work.

Supply and Delivery of 440 volt 3 phase MUG -15 FASD starter ( relay range 9A to 14 A) on angle iron frame on wall with necessary connection as per G.S. (Make - LK/HAVELLS/ABB-MU-G 15) (Cat No.CS94091 SOAO )

Add. G.S.T.@ 18% (on Total from item no 1 to 20) to be calculated by bidder

Add. LWC.@ 1% to be calculated (on total from item no 1 to 20 + GST@18%) by bidder

M/S. GOPAL ELECTRICALS (BID ID -6866400)

Swarnendu Sarkar (BID ID -6854934)