SPL REPAIR / REPLACEMENT OF LT UG CABLE, LT PANEL, LT POLE AND CONNECTED WORKS AT AF STN GANDHINAGAR AND SPL REPAIR / REPLACEMENT OF PCC STREET / PERIMETER LIGHT POLE WITH STEEL TUBULAR POLE, LIGHTS AND CONNECTED WORKS AT GANDHINAGAR UNDER GE (AF) CH

Amount

Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in soft/ loose soil for taking up/ laying cable/pipe etc completed all as specified and directed.

M & L for Excavation in trenches exceeding 1.5m width and not exceeding 3 m in depth and getting out in soft/loose soil for taking up/laying cable/pipe etc complete all as specified and directed.

Returning, filling including spreding, leveling watering & well ramming in laying not exc. 25cm for soft/ loose soil complete all as specified and as directed.

Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point for soft/ loose soil complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D2 (using 40mm graded stone for foundation, filling and mass concrete for pole) complete all as specified and directed.

Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone for foundation) complete all as specified and directed.

Material and labour for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping including necessary form work, chamfers and finishing with using cement etc. for street light pole foudation complete all as specified and as directed.

Supply, laying and jointing in replacement old u/s HDPE pipe 40mm dia conforming to IS 4984-1995 suitable for the respective working pressure PN10 with all fittings and accessories complete all as specified and directed.

Supply and laying 50 mm outer dia HDPE pipe (DWC) Double wall corrugated outer surface and smooth inner wall, ISI marked and as per IS : 16205 (part-24) or latest IS 14930 (part-II), 450N compressive strength with snap fit coupler with rubber ring for underground electrical cable protection conduits Orange colour complete all as specified and directed.

Supply and laying 90 mm outer dia HDPE pipe (DWC) Double wall corrugated outer surface and smooth inner wall, ISI marked and as per IS : 16205 (part-24) or latest IS 14930 (part-II), 450N compressive strength with snap fit coupler with rubber ring for underground electrical cable protection conduits Orange colour complete all as specified and directed.

Supply and laying 110 mm outer dia HDPE pipe (DWC) Double wall corrugated outer surface and smooth inner wall, ISI marked and as per IS : 16205 (part-24) or latest IS 14930 (part-II), 450N compressive strength with snap fit coupler with rubber ring for underground electrical cable protection conduits Orange colour complete all as specified and directed.

Supply and laying in replacement XLPE insulated PVC inner sheathed, armoured with galvanized steel of wire heavy duty under ground cable with aluminium stranded conductor 1100 volt grade of 185 Sqmm 3.5 Core laid up trenches/duct crossing through pipe/duct or fixed on pole and with suitable size of glands complete and testing complete all as specified and directed by Engr-in-Charge.

Supply and laying in replacement XLPE insulated PVC inner sheathed, armoured with galvanized steel of wire heavy duty under ground cable with aluminium stranded conductor 1100 volt grade of 95 Sqmm 3.5 Core laid up trenches/duct crossing through pipe/duct or fixed on pole and with suitable size of glands complete and testing complete all as specified and directed by Engr-in-Charge.

Supply and laying in replacement XLPE insulated PVC inner sheathed, armoured with galvanized steel of wire heavy duty under ground cable with aluminium stranded conductor 1100 volt grade of 50 Sqmm 3.5 Core laid up trenches/duct crossing through pipe/duct or fixed on pole and with suitable size of glands complete and testing complete all as specified and directed by Engr-in-Charge.

Supply and laying in replacement XLPE insulated PVC inner sheathed, armoured with galvanized steel of wire heavy duty under ground cable with aluminium stranded conductor 1100 volt grade of 25 Sqmm 3.5 Core laid up trenches/duct crossing through pipe/duct or fixed on pole and with suitable size of glands complete and testing complete all as specified and directed by Engr-in-Charge.

Supply and laying in replacement XLPE insulated PVC inner sheathed, armoured with galvanized steel of wire heavy duty under ground cable with aluminium stranded conductor 1100 volt grade of 16 Sqmm 4 Core laid up trenches/duct crossing through pipe/duct or fixed on pole and with suitable size of glands, lugs complete and testing complete all as specified and directed by Engr-in-Charge.

Supply and laying in replacement XLPE insulated PVC inner sheathed, armoured with galvanized steel of wire heavy duty under ground cable with aluminium multi stranded conductor 1100 volt grade of 10 Sqmm 4 Core laid up trenches/duct crossing through pipe/duct or fixed on pole etc with lugs, glands and testing complete all as specified and directed by Engr-in-Charge.

Material and labour for earthing complete with galvanized steel pipe electrode, 40mm bore, medium grade, 2.5 metres lengthburied directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as per shown in electrical plate No. 5 of MES Schedule Part-I with connected to earth test point main switch board with including necessary earth work and Pre- cast RCC earth pit with cover and including dismantling/taking out of old unserviceable earthing of any position complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth strip 32 x 6 mm (main earthing lead) by means of galvanized bolts, nuts and washers all as per shown in electrical plate No. 5 of MES Schedule Part-I with connected to earth test point main switch board with including necessary earth work and Pre- cast RCC earth pit with cover and including dismantling/taking out of old unserviceable earthing of any position complete all as specified and directed.

S & F in replacement MCCB 63 Amps 4 pole with sheet metal enclosures box complete all as specified and directed.

S & F in replacement MCCB 100 Amps 4 pole with sheet metal enclosures box complete all as specified and directed.

S & F in replacement pipe galvanized, “Light grade”, 40mm dia for protection of cable under road, pavment including fittings complete all as specified and directed.

M & L for Boring of holes under road, pavement, hard standing by Mannualy or necessary machine for inserting of pipe up to 100 mm dia complete all as specified and directed.

Supply and installed cubicle compartmentalised outdoor type LT section pillar box, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.0 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, danger plates etc. and section pillar box shall comprising the following complete including fixed in position, connect with electric supply complete all as specified and directed by EIC including taking out old :- ( Sub station ) (a) Bus bar chamber having 4 copper Bus bar strip 600 A Capacity. (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 250-320 Amps with ruputring capacity 35 kA (c) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 160-200 Amps with ruputring capacity 25 kA (d) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 100-125 Amps with ruputring capacity 25 kA - 02 Nos (e) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 80-100 Amps with ruputring capacity 25 kA - 02 Nos (f) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 50-63 Amps with ruputring capacity 25 kA - 02 Nos (g) MCB TPN, 10-32 Amps - 02 No (h) MCB SPN, 20 Amps - 02 No (i) 3 Ph KWH meter class 0.5 with CT (j) LED display 3 line multimeter with CT (k) 3 Phase LED display Amp meter class 0.5 with CT - 07 Nos (l) RYB Phase indicator lamp LED Type - one set (m) One spare space for MCCB (n) APFC controller porgramable 8 step contactor switching with CT for 3 phase, 440 V, 50 Hz System (o) Contactor 3 phase ,440 V Capacitor Duty suitable for 5 KVAR - 02 Nos

(p) Contactor 3 phase ,440 V Capacitor Duty suitable for 10 KVAR - 02 Nos (q) Contactor 3 phase ,440 V Capacitor Duty suitable for 20 KVAR - 02 Nos (r) MCB TP 10 - 32 Amps for capacitor - 06 Nos (s) 5 KVAR capacity capacitor APP type for 3 phase ,440 V, 50 Hz - 02 Nos (t) 10 KVAR capacity capacitor APP type for 3 phase ,440 V, 50 Hz - 02 Nos (u) 20 KVAR capacity capacitor APP type for 3 phase ,440 V, 50 Hz - 02 Nos

Supply and installed cubicle compartmentalised outdoor type LT section pillar box, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.15 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, danger plates etc. and section pillar box shall comprising the following complete including fixed in position, connect with electric supply complete all as specified and directed by EIC including taking out old LT panel DG area Incoming (a) Bus bar chamber having 4 aluminium Bus bar strip 200 A Capacity. (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 50-63 Amps with ruputring capacity 25 kA 01 No (c ) LED dispay 3 line Multimeter (d) LED RYB Phase indicater - 01 Set Out going (a) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 50-63 Amps with ruputring capacity 25 kA (b) MCB TPN, 10-32 Amps - 02 Nos (c) MCB SPN, 20 Amps - 04 Nos

Supply and installed cubicle compartmentalised outdoor type LT section pillar box, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.15 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, danger plates etc. and section pillar box shall comprising the following complete including fixed in position, connect with electric supply complete all as specified and directed by EIC including taking out old :- (LT panel 258 SU office) Incoming (a) Bus bar chamber having 4 aluminium Bus bar strip 250 A Capacity. (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 125-160 Amps with ruputring capacity 25 kA 01 No (c) On load manual Changer over switch 4 pole 125 amps- 01 No (c ) LED dispay 3 line Multimeter (d) LED RYB Phase indicater - 01 Set Out going (a) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 80-100 Amps with ruputring capacity 25 kA -02 Nos (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 50-63 Amps with ruputring capacity 25 kA -01 No (c) MCB TPN, 10-32 Amps - 02 Nos (d) MCB SPN, 10 Amps - 02 Nos

Supply and installed cubicle compartmentalised outdoor type LT section pillar box, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.15 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, danger plates etc. and section pillar box shall comprising the following complete including fixed in position, connect with electric supply complete all as specified and directed by EIC including taking out old :- ( LT panel OPs complex) Incoming (a) Bus bar chamber having 4 aluminium Bus bar strip 250 A Capacity. (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 100-125 Amps with ruputring capacity 25 kA 01 No (c) On load manual Changer over switch 4 pole 125 amps- 01 No (c ) LED dispay 3 line Multimeter (d) LED RYB Phase indicater - 01 Set Out going (a) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 50-63 Amps with ruputring capacity 25 kA -02 Nos (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 40-50 Amps with ruputring capacity 25 kA -02 No s (c) MCB TPN, 10-32 Amps - 05 Nos (d) MCB SPN, 10 Amps - 03Nos

S & F in replacement of weather proof SMC junction box of outside size 350mm x 250mm x 150mm fixed on angle iron leg 25 x 25 x 5 mm of 600 mm lenth including 01No of 15 Amps switch socket combination with PVC encloser box and 1 No MCB TPN, 32 Amps etc fixed in SMC junction box complete all as specified and as directed.

Disconnecting existing LT cable terminal at existing street light Junction box and stretching / opening cable to suitable required length from available rings with excavation of soil and reconnecting cable in position properly with providing new lugs, tapes etc for cable size upto 16 sqmm complete all as specified and as directed.

Dismantling and demolition of old damaged PCC poles of any type complete all as specified and as directed.

Supply and fix steel tubular poles complete with cast iron base plate, finial taper plug bolts, nuts and screw as specified type 410 SP-31 (9.00 Mtr Long) including two coat of aluminium paint above the two coats of red oxide primer including making of strip 20cm each (Sky blue & white) up to 1400mm height with enamalled paints, bituminus black paint over bottom of pipe upto 1500mm length and also marking the pole numbers with white enameled paint complete all as specified and directed by Engr-in-Charge.

S&F in repairs FRLS PVC insulated standed copper conductor wire of 1.5 sqmm dia, 3 core from existing junction box to light fitting complete all as specified and as directed.

Disconnecting the existing unserviceable SMC junction boxes and Supply and fix weather proof SMC junction box of outside size 300mm x 200mm x 105mm including 4 Nos of bus bar strip of aluminium of size 25 x 4 mm suitable for 440 volts of suitable amps rating including 1 No MCB SPN, 6 Amps, 250 volts with 'C' curve to be fixed on pole with new clamp complete all as specified and as directed.

S & F for LED street light fitting 90 Watt IP66, 230 V AC with PDC Aluminium body & Secondary optical lens for superior light distribution. Efficacy >110 Lm/W. with high pressure die cast aluminum hosing and heat resistant LED street light fitting with driver, complete all as specified and directed.

S & F for symmetrical beam LED flood light fitting 200 Watt, IP66 protection, 230 V AC with PDC housing and toughened glass & indl LED with secondary optical lens for superior light distribution, Lumen efficiency >110 Lm/W. 4 KV inbuilt and 10 KV external surge protection with driver, complete all as specified and directed.

S & F for symmetrical beam LED flood light fitting 100 Watt, IP66 protection, 230 V AC with PDC housing and toughened glass & indl LED with secondary optical lens for superior light distribution, Lumen efficiency >110 Lm/W. 4 KV inbuilt and 10 KV external surge protection with driver, complete all as specified and directed.

M & L for in replacement of corroded, broken MS street light bracket of any type and size and including new fabrication work made of MS angle iron, channel, girders, square tube, round pipe , rolled bar and flat iron etc quality confirming to Fe-410-W or Gde-E 250 quality -A with fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, polishing , drilling holes for bolts, in any shape or size as required at site or directed and inclusive one coat of primer and two coat of aluminium paint complete all as specified and directed by Engr-in-Charge.

Electricals India

ALBA AC AND REF SERVICES

TRIMURTHI ENTERPRISES

TECH SERVE SOLUTIONS

Harsh Infrastructure

M/s Matadeen Ramchandra Agarwal