CA NO. CWE/HILLS/RKT/58 OF 2024-2025 CERTAIN REPAIR TO ROAD AND ROAD SIDE BERMS IN MIL CANTT HALDWANI AND NAINITAL UNDER GE (MES) RANIKHET

Amount

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/tack coat with bituminous primer paving bitumen with viscosity grade VG-10 at 5 kg per 10 sqm on black top surfaces complete all as specified and directed.

M&L for bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content of bitumen with viscosity grade VG-30 by weight of total mix, rolled and compacted to required camber and gradient complete with 8 to 10 tonnes power roller to required complete all as specified and directed.

M&L for premix bituminous, macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/ rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. Note for item No. 02 & 03 : (i) Design Mix for bituminous macadam shall be carried out through an authorised testing lab and the cost of testing shall be included in quoted rate. (ii) Aggregates for Bituminous works shall confirm to clause No 20.B.2.5 of SSR 2009 Part- I (Specifications). (iii) Based on job mix formula, in case the binder content (i.e. Bitumen) is less than the content specified under these items then a minus adjustment @ Rs 70/- per kg of bitumen (less consumed) shall be applied on the quoted rate of contractor against these items, hence the quoted rate of contractor shall be reduced based on less content of bitumen required as per job mix formula. However, no price adjustment on plus side shall be made for increase of quantity of bitumen in case of required as per job mix formula.

M&L for laying hot applied thermoplastic compound (paint) 2.50 mm thick including reflecting glass beads incl cost of all materials, labour, machinery, T&P etc. required for proper completion of work incl all other charges. The finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification No. 803 as per IRC. Painting lines, dashes, arrows, letters etc. on roads, pavements and the like n exc. 10 cm wide with road marking paint, white or golden yellow complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class `B’ bricks old size, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

S&F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

S&F in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufacturers instructions complete all as specified and directed.

Supply and fixing solar cat eye aluminium alloy shall ( 100% water proofing design according to 65) of size 125mmx 125mmx 25mm ( shank 65 mm) of high efficiency mono rystafie solar panel 2.4 V/ 0.3 watt one NI-ed rechargeable battery ( 1.2 V/1600MA) consisting os super bright LED with 10000 to 18000 mcd completed as per manufacturers instructions etc. complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid edded and pointed in any mortar complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor complete all as specified and directed.

M&L for 50 mm thick sand cushioning layer under interlocking paver block complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specified and as directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete work in pavement/hard standing of flexural strength 40kg/SqCm in field using 400 kg of cement per cubic metre, thickness of concrete 25cm or less complete all as specified and directed.

M&L finishing surface of concrete roads, pavements by brooming complete all as specified and directed.

M&L for forming 12 mm thick expansion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound, grade B for 150mm thick concrete slab complete all as specified and directed.

M/s RK JOSHI&SONS (BID ID -3133794)