Construction of a Store romm in the Open Space Adjacent to the water distribution Station ( located at TP2 FP 51 in the Ghatlodia ward of NWZ For Storing MAterial belonging to the Engineering and other Department as weel as repair and renovation work at other Colation as required

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil (04001B)

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil (04002A)

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil (04003B)

Extra for additional depth more than 5.0 m for excavation for foundation including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 m lead.(B) Dense or Hard soil (04004B)

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil (04B001A)

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil (04B002A)

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil (04B003A)

Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with shoring and struting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified. In all sorts of soil and soft murrum.

0 to 1.5 meter depth.

1.5 to 3 meter depth.

3 to 4.50 meter depth.

4.50 to 6.00 meter depth.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. (4006)

Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming and consolidating etc. complete (04009A)

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting out the soil and disposal of the surplus excavated soil as directed within a lead of 50 Meter for following diameter of pipes.(iii) 300 mm (04010C)

Extra for under reaming inside the bore Holes for under reamed piles of following Diameter.(iii) 300 mm (04011C)

Empty Boring through all sorts of strata for providing 0.6 mt. diameter RCC bored piles to required depth including providing necessary casing pipe with all plants and equipments as required complete(excluding Concrete & Reinforcement)

Providing and casting in situ machine mixed controlled cement concrete M-35 for RCC bored piles 0.6mtr.dia. Using Tremie Pipe including necessary flushing,dewatering ,formwork ,transporting , compacting, vibrating, curing and finishing including all leads & lifts complete as per detailed specifications ( Excluding Reinforcement)

Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap, excluding the cost of Concrete, steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :

400 mm dia. Piles

450 mm dia. Piles

Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter excluding the cost of Concrete, steel reinforcement (only the nos. of extra bulbs are to be paid).

400 mm dia. Piles

450 mm dia. Piles

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (05003A)

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (05004A)

Providing and laying cement concrete 1:5:10 (1-Cement:5-Coarsesand:10- hand brokenstone aggregates 40mm no minalsize)and curing complete excluding cost of formwork in (A) Foundation and Plinth(Sor-2021-22 Item no.05006A, Chapter-5)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level (05014C)

Provdg. & laying ordinary cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3graded stone aggregates 20 mm nominal size) for R.C.C. linted including finishing smooth with curing etc.complete including the cost of form work but excluding the cost of reinforcement.

Providing and laying controlled cement concrete M.150 for curing complete excluding cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings,Base of columns and Mass concrete (05023AA)

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.(05025AA)

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (B) Walls, from top of foundation level upto floor two level(05025BA)

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts, upto floor two level(.05025DA)

Providing and laying in position Ready Mixed M 200 grade concrete for reinforced cement conctere work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (5055)

Providing and laying in position Ready Mixed M 250 grade concrete for reinforced cement conctere work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 450 kg ) (5056)

Providing and laying in position Ready Mixed M 300 grade concrete for reinforced cement conctere work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 475 kg (5057)

Providing and laying in position Ready Mixed M 350 grade concrete for reinforced cement conctere work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash(Min cement level as per latest IS 456 shall be maintained) (Cement level 500 kg ) (5058)

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)in foundation and plinth (B)Conventional

Extra for brick work in superstructure above plinth level upto floor two level (B) Conventional

Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm.in Cement mortar1:4(1-Cement:4-coarse sand) in foundation and plinth (B) Conventional

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete. (09001AA)

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (C) Vertical surface such as walls

(any thickness) partitions and the like including attached buttresses & string course & the like. (09001CA)

Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500,of required size, Mesh Type 10x12(D=100 mm with tolerance of ± 2%) Zinic+PVCcoated, Mesh wire diameter2.7/3.7mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per directions of Engineer-incharge

Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site.

Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete. (Payment for Stone to be made separately).

Labour charges for dry stone pitching of 22.5 cm. thick including preparing the surface etc complete.

Providing and supplying,and jointing ISI mark only standard length stoneware pipes of following class and diameter including excavation for laying of pipes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. compl. (IS651/1989 or its latest revision) including labour work for lowering, laying, joiting with cement mortar (1:1) proportion, proper postion, grade and alignment and all level as directed by engineer in charge including store to site of work jointing material etc complete.

100 mm dia

150 mm dia

230 mm dia

Providing and laying rubble soling of required thickness, under trenches, pits,foundations etc. including hand packing, laying in proper grade, spreading, filling the interstices with sand/quarry dust/grit including watering, consolidation by rolling/ compacting mechanically with 3-5 ton compactor etc complete as per drawings,specifications and as directed by EIC.

Conveyance charge of earth, lime, murrum, building rubbish, manure, garbage, sludge, excavated rock, fly ash, aggregates of any kind executed outside the road site. Rate also includes spreading & levelling etc complete. Internal conveyance above 50 mt done within the work site is not payable.

Providing and operation dewatering Pump including fuel charges & operator Charges etc. as directed etc. comp. (Shift for Eight Hour) (For Each Pump Set, No payment should be allowed for non working condition of machinery)

Hiring and operating Mud Pumps incl. Cost of fuel and operator including the cost of to and fro transportation, laying of the delivery hoses as required, lowering and lifting the pumps as and when required etc. complete. Set Do As Directed. (No payment should be allowed for non working condition of machinery)

Hiring and operating the 20 KV 3 Phase Electric Generator for operating desilting machinery, and lighting and other requirements with Arranging diesel to run the D.G. Set Do As Directed. 8 Hrs Shift. (No payment should be allowed for non working condition of machinery)

Providing & Supplying JCB Machine on rental basis in case of emergency situation and break down type work & also during unavoidable condition as per instruction of engg. in charge, rate includes all nece. shifting, fuel and operating charges and stacking of useful & non-useful materials separately up to store. (No payment should be allowed for non working condition of machinery and for pipe line excavation and laying work)

Supplying Pneumatic Breaker Machine for RCC Slab or Asphalt Demolishing Work on site by using Operator, fuel, power Supply etc. Complete as Directed. (No payment should be allowed for non working condition of machinery and for pipe line excavation and M.H. work. Allowed only for break down work)

Providing & Supplying Hitachi Machine-110 capacity on rental basis in case of emergency situation and break down type work & also during unavoidable condition as per instruction of engg. in charge, rate includes all nece. shifting, fuel and operating charges . (No payment should be allowed for non working condition of machinery)

Providing & Supplying Hitachi Machine-200 capacity on rental basis in case of emergency situation and break down type work & also during unavoidable condition as per instruction of engg.incharge , rate includes all nece. shifting, fuel and operating charges. (No payment should be allowed for non working condition of machinery)

Providing & Supplying hydra carne Machine of 12 tone capacity on rental basis in case of emergency situation and break down type work & also during unavoidable condition as per instruction of engg. in charge, rate includes all nece. shifting, fuel and operating charges. (No payment should be allowed for non working condition of machinery)

Supplying, labour for break down repairing work for activities like excavation, disliting, removing debris from trench back filling etc. comp. as directed by Eng.in charge.

Mazdoor at day /Night

Fitter at day / Night

Makadam/ supervision at day / Night

Providing, laying and jointing in true line and level UPVC pipe (SCH-40) of following dia. Including fittings of standard make as approved by Engineer-in-charge.

Providing and laying polished kota stone slab 25 mm thick in risers of steps,skirting,Dedo and pillars laid on10 mm thick cement mortar1:3 (1-Cement:3coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc.complete.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- coarse sand ) finishing with flush pointing in white cement.

Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement:3-coarsesand) and jointed with white cement slurry (upto 10 ton)

Providing and layingCeramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

Providing and laying broken chine mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be laid over cement mortar1:3 top lain or slope and to be tempered to bring mortar creme out up to surface using white cement including rounding off junctions and extending them upto 15 cm along the wall,clearing with water and oxalic acid etc.as directed.

Providing 15mm thick cement plaster in single coat on Rough (Similar) side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:3 (1-cement :3-sand)

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12 mm thick backing coat of C.M. 1:3 (1-cement: 3-sand ) and 8mm thick finishing coat of C.M.1:1 (1-cement: 1-sand) etc. complete.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials .etc complete

Wall painting (two coats) with plastic emulsion paint of approved brand & manufacture on undercoated wall surface to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortrd ropping and other foreign matter and sand papered smooth.

Making hole on existing CI/DI/MS water pipe line including nacessary GI fittings item also includes necessary excavation, dewatering and refilling as per instruction Engineer In charge etc.comp.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(G) 110mm

Providing and fixing water closets quatting pan (Indian type W.C pan) size 580 mm (earth work,bed concrte,foot rests and trap to be measured and paid for seperately)(A)Vitreous China (I) Long pattern white colour.

Providing and fixing wash basin with single hole for pillar tap with C.I.or M.S.brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back wash basin 550mm x 400mm size.(i) In white colour.

Providing and fixing S.W.gully trap with C.I.grating brick masonry chamber and water tight C.I.cover with frame of 300 mm x 300 mm size (inside) with standard weight.(i) Square mouth traps.(B)150 mm x 100 mm size P or R type

Providing erecting and fixing double coated Syntex PVC.(ISI)water tank of required capacity each with all necessary fittings and connection etc. complete on terrace.(S.O.R.- 2021-22 -I.C.- 22014,Pg.No.-199)

Providing and fixing screw down bib taps of following size.(A) Brasss crew down bib tap polished bright. (i) 15mm dia.

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C.I.screaed down or higned grating including cost of cutting and making good the walls and floor100 mm inlet and 50 mm outlet.(C)100mm dia.

Providing and fixing chromium plated,bottle trap with necessary couplings of approved quality for wash basin.

Providing and fixing ball cock of approved.quality as directed.(A) Copper Metal (i) 25mm dia.

Provdg. & laying S.W. Gully trap with brick masonry chamber & water tight G.T.Stone including fixing of covervSquare mouth trap 100 mm x100 mm size P-Trap (S.O.R.- 2021-22 -I.C.-,Pg.No.-218)

Constructing a sink (chowkedi) with C.C.1:2:4,12cm.thick over B.B.masonry in C.M,(1:6 ) in front and dwarf wall 1.0 Mt.high and 23 cm.thick cement plaster to masonry/in C.M.1:3) and cement concrete flooring in 1:2:4:mix 5 cm.dia.drain pipe etc.complete.(at health dept and MH Dept)

Providing and Laying of Rubber Moulded Paver Block Grey/Coloured 60 mm thick, M-35 Grade of any size ; shape (Usually Uni-Paver Blocks) using black trap good quality aggragate of 20 mm nominal size for footpath, parking areas, service lanes and other areas as mentioned in the drawing/instruction of engineer in charge. Cost includes formworks using rubber mould, Rate providing and laying paver blocks as per required grading and specification. The paver block shall be mechanically compacted. The work of paving blocks shall be executed in line and level by skill mason of flooring work only. It should be laid in such a way that the no cutting of the paver block to be necessary. if cutting of paver block necessary then it should be cut by machine only and carting. The finished surface of the paver block shall have resonably good, plain finished. Paver blocks shall be compacted and shall be relaid if necessary. Gravel or such type of materials shall not be allowed for production. Laying on 5cms thick sand beddding.

Providing and laying of interlocking grey Paver Blocks of high density 80mm thick made from M-40 grade concrete using 6 mm to 20 mm machine crushed well graded stone aggregate, sand of approved quality, OPC 53 grade cement with contractor's own concrete mix design as approved by AMC, for parking, road. Cost Includes formwork, using rubber/FRP mould, laying paver block as per required grading and specification laid paver block shall be mechanically compacted. The work of the paving blocks shall be executed in line and level by skilled mason of flooring work only. It should be laid in such a way that the no cutting of the paver block to be necessary. Cutting of paver block by machine cut only and carting to be done. The Finished surface of the Paver Block shall have reasonably good plain finish. Paver blocks shall be compacted and shall be re-laid if necessary. Gravel or such type of materials shall not be allowed for production. Laying on 5 Cms thick sand bedding.

Paver Block Providing and laying shot blasted Non - interlocking, Paver blocks of specified thickness, size, grade of concrete and colour machine made and blasting by automatic shot blasting machine and high density of as per approved sample of approved make for footpath, parking areas, service lanes,cross over and other areas as mentioned in the drawing. Including providing and laying 50 mm thick averave bedding layer of coarse sand below paver block as per required grading and specification. Laid paver block shall be mechanically compacted. The work of the paving blocks shall be executed in line and level by skilled mason of flooring work only. Small size of paver block with same specification shall be used at residue or at end. It should be laid in such a way that the no cutting of the paver block to be necessary. If cutting of paver block shall be required , than cut by machine only and laying to be done by skilled flooring mason. The finished surface of the paver block shall have coarse sand Texture Finish. Pave blocks shall be compacted and shall be re-laid if necessary. Actual laid area shall be measured and paid without any wastage. (A) 80 mm thick M-35 grade Grey Paver block of size 200mm x 200mm.

Supplying and fixing of 300 mm-L x 150 mm-B x 380 mm-H Kerb Block for Footpath in M-20 grade using 20 mm nominal size black trap aggregate of Sevaliya/Timba or equivalent quality for pre-cast blocks, reasonably exposed finish/ formwork , mould with well equipped with vibratory system for kerb stones of approved design including curing, etc. complete, including the cost of formwork etc. complete. The rate shall also include necessary cutting of asphalt, fixing the Kerb stones in line and level on 5 cm thick sand bedding with necessary equipments and materials. The rate shall also include the flush pointing in CM (1:3) for all joints of the kerbstones. Filling of zari alone the sides of the kerb stone fixed with Bituminous concrete mixed in proper position as directed by Engineer in change to form a portable mixture. In any case Gravel or such type of materials shall not be allowed for production. a) Laying on 5 cm thick Sand Bedding.

Supplying and fixing of 380 mm H x 300 mm L x 200 mm B Kerb Block for Central Verge in M-20 grade using 20 mm nominal size black trap aggregate of Sevaliya/Timba or equivalent quality for pre-cast blocks, reasonably exposed finish/ formwork, mould with well equipped with vibratory system for kerb stones of approved design including curing, etc. complete, including the cost of formwork etc. complete. The rate shall also include necessary cutting of asphalt, fixing the Kerb stones in line and level on 5 cm thick sand bedding with necessary equipments and materials. The rate shall also include the flush pointing in CM (1:3) for all joints of the kerbstones. Filling of zari alone the sides of the kerb stone fixed with Bituminous concrete mixed in proper position as directed by Engineer in change to form a portable mixture. In any case Gravel or such type of materials shall not be allowed for productiona) Laying on 5 cm thick Sand Bedding

Pre cast concrete kerb Providing and fixing M25 Grade of concrete precast exposed / Fair finish / texture finish kerb stones of approved make as per approved sample of any size and any type. Kerbs shall be fixed on the foundation prepared as per approved design. The rate shall also include for erecting and fixing the pieces in position for complete kerb system with chamfered type of kerbs including necessary accessories of kerb like radius kerbs, angles and quadrant kerbs, droplet kerbs etc. complete as per drawing. Kerb shall be fixed as paper joint without any jointing material. However cement mortar shall be provided at the backside of kerb stone joint. (Sample must be approved) Cost of excavation, cutting , base , side filling shall includes as directed engineer - incharge in above item description as per BOQ (b) 380 x 600 x 150 mm high Footpath kerb.

Providing and fixing pre-cast concrete ker stone of gray cement based concrete bloc 30cm length,30cm height and 15cm thick o M200 grade concret as per approved design an including excavation for fixing in proper lin and level,filling the joint with C:M 1: (1cement:3fine sand) etc complete.

Painting Two Coats on divider and footpath curb surface / New Concrete Surface ( Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like (R & B SOR-2023-24, Item code 11002AA, NBO.11.4)

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S

Providing & erecting open well type horizontal mono block pump set with stainless steel body having following specification (A) 0.5 H.P. single phase open well motor pump set having discharge of 115 LPM @ 15 mtr. head suitable for 32 mm dia. delivery pipe with control panel including 3core flat cable of required size of length 5 Mtr.

Painting the kids picture chart & letter writting of different size and shapes as per details/design etc.comp. as dire.

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Codal Provision.

Supply, Spreading and leveling of Brick dust (Chharu) particle size having maximum 10 mm

Providing & Laying 18 mm thick Mirror polish granite For flooring , counter , stair -riser , tread , skirting , dedo , Jambs etc. machine cut or chiselled on bed of cement mortar 1:1 pointing with neat cement slurry incl. moulding, Making grooves where it is required etc. comp. as per instruction of engineer in charge.

Providing and laying marble stone slab flooring over 20 mm. (Average) base of cement mortar 1:6 (1 cement: 6 coarse sand) or L.M. 1:1.5 laid and jointed with grey cement slurry including rubbing and polishing complete: (A) Marble slab 25 mm. thick.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- cement : 3-coarse sand) finishing with flush pointing in white cement.

Providing & Fixing 3 mm thick F.R.P.sheet of Approved Quality & Color / Pattern as per Consultant's design also includes required fabrication structure in the grid of 2'-0x2'-0 size using hollow pipe of 16 gauge & size 2"x1" & 1"x1",G.I. & Bitumen Washers,Silicon paste application for fixing the sheet.Rate also include necessary bending,cutting,labour charges,Zinc Primer coat & Two coats of oil painting of color as approved by consultants & making good the wall.(N.S.)

White washing with lime on wall surfaces (two coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter etc. complete.

Distempeing (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a priming coat with alkali resistance primer of approved brand after thoroughly brushing the surface and other foreign matter and also including preparing the surface even and sand parpered smooth.

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats/ Box section / channal / angle etc. at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws etc. (A) Plain Grill.

Providing and fixing 1 mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40 x 40 x 6 mm angle iron, 3.15 mm M.S. gusset plate at junctions and corners 25 mm dia pully 40 x 40 x 6 mm angle and T-iron guide rail at top and bottom respectively with handles, stoppers and locking arrangement etc. including applying a priming coat of red lead paint.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete.

Hiring of Tractor with trolley considering 8 Hrs. As working Day hours inclu. Driver

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 40mm x 40 mm x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c. with five Horizontan lines and two diagonals of galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G.I,staples including fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc complete.

P/M/F chainlink jali 8’ x 4’ size asper details sketch & instruction ofengineer in charge same as Laldarwaja garden pattern consistingof 3’ dia. M.S. black pipe ‘A’ class5’4" ht. fixed at 8’9” c/c inC.C. 1 : 2: 4 block of 9” x 9” x 9” size chainling jali of size 2” x 2” x 10 gaugefixed in 35 x 35 x 5 mm MS angleframe 8’ x 4’ size with MS flat of size25 x3 mm welded with jali etc.comp. The jali is to be welded toM.S. pipe with MS flat asinstruction given.The M.S. pipe andthe M.S. angle frame are to be painted one coat of primer and twocoats of paint as directed inline and level. (N.S.)

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks,Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer.filled with white lead complete excluding the costof purlins, Rafters and Trusses. (1)0.80mmthicksheet.(upto10 ton)

Stone Crete - External plaster : Providing and laying of approved Stone Crete plaster of panel as per architecture drawing with copper & glass chips on pre applied backing coat of plaster over external wall in required proportion using chips of copper and glass specified colour and material including making of pattern using 10 x 10 mm grooves as specified by the Architect, washing and cleaning the surface after application, curing etc. complete, as per drawing and instruction of Engineer In-Charge.

Supplying, fabricating and embedding M.S. anchor bolts, channels, angles, chequered plates all other type of Structural Steel in concrete members during concreting as per drawings and instructions in all positions and at any level including keeping them in correct position and alignment, including adjustment of reinforcement and shuttering, etc complete and including two coats of approved oil paint over red oxide primer of exposed surfaces for above mentioned inserts after embedment, etc. all as specified.

P/A Tremix with dewartering machine and floater machine on constructed CC work for finishing the surface as per requirement. The rate including all machinaries, labor, loading, unloading, transportaion etc complete as per direction given by engineer in charge.

Making 15 mm. Groove in RCC work on road & filling it with polysulfied selant & finished ot good incl. all labour charges etc. comp.as directed.

Providing and fixing of self supported roofing system with proper overlapping and seaming b/w different sheets without making holes preventing the overturning the roof by wind addition made of from superior quality, structural grade steel , base metal width 912 mm steel grade: Grade D and thickness 1.30 mm BMT, 1.35 mm TCT with tolerance of +/- 0.04mm , colour coated Galvalume steel only. Design, supply & fabrication of self supported single span arch roof fabricated from mechanically seamed manufactured by imported machines to profiles of colour coated Galvalume Cold Rolled Structural Steel coils as per standard ASTM A792 M, XMA3402, Coating-AZM-150 Tata Bluescope Steel Limited India with Reverse Branding every 1 meter along the length with SDP coating. The rate of item is including fitting as per standard specification and details drawing & directed by Engineer in Charge.