GENERAL-2025-26 Running contract to Rest House chalakudy-for one year-

Amount

Detailed Estimate

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White

18.74.1:Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, Collar and bush approved quality and colour .15 mm nominal bore with 30 cm length

18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

OD236647/2024-2025:Providing and fixing CP pillar cock of approved quality 15mm nominal bore

50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

OD236639/2024-2025:Repairing the flush tank by replacing new washers and put the same in working order.

50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall

50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall

50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

50.18.9.22.3:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow

OD236641/2024-2025:Overhauling the not working flushing system of the closet after dismantling the inside fittings like float valve , new washer, syphon etc in place of damaged one including cost , conveyance, labour etc complete

OD236646/2024-2025:Engaging Fitter Grade I for attending petty repairs of sanitary and water supply installations etc complete.

OD236645/2024-2025:Engaging Skilled beldar for attending petty repairs of sanitary and water supply installations etc complete.

OD236642/2024-2025:Engaging coolie

OD236640/2024-2025:Engaging carpenter Ist class for repairing doors etc complete.

OD236652/2024-2025:Supplying good quality floor mat (120x90cm)

OD236655/2024-2025:Supplying good quality cotton single coat bed sheets

OD236653/2024-2025:Supplying good quality cotton king size bed sheets

OD236650/2024-2025:Supplying and fixing 15mm SS Angle cock

OD236648/2024-2025:Supplying and fixing good quality SS towel rod 60cm long, using 15mm or nearest available size

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

OD236649/2024-2025:Supplying good quality plastic bucket 20 litre capacity

OD236651/2024-2025:Supplying good quality plastic mug 500 ml capacity

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

OD39783/2025-2026:Supplying good quality Mop for cleaning

OD39784/2025-2026:Supplying good quality toilet cleaning Brush

OD39785/2025-2026:Supplying good quality Detergent powder

OD39786/2025-2026:Supplying good quality Floor cleaning liquid

OD39787/2025-2026:Supplying good quality Toilet cleaning liquid

OD40114/2025-2026:Supplying good quality tea set (Glass)

OD40115/2025-2026:Supplying good quality Dinner set

13.112.1:Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shadeOld work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

OD40307/2025-2026:Supplying good quality steel Allmirrah of Size 1.20*0.45 *2.00m Size

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD108873/2025-2026:Roofing with G.I hard colour powder coated Trafford sheets 0.50 mm thick or nearest available thickness with overlaps of 150 mm at ends and GI hook or crank CI bolts and nuts including plain washers and bitumen washers etc complete.(based on spec. 12.50)

OD109241/2025-2026:Supplying good quality diesel for Generator

BABU THOMAS (BID ID -2303543)

Bidder Name

M L SHAJU

BABU THOMAS