Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹11.5 LAccepted-AOC | L 1 | Accepted-AOC Found Lowest one | |
| 2 | L 2₹12.7 L+₹1.2 L (10.4%)Rejected-Finance | L 2 | Rejected-Finance Reject | |
| 3 | L 3₹13.8 L+₹2.3 L (20.3%)Rejected-Finance | L 3 | Rejected-Finance Reject | |
| 4 | L 4₹16.4 L+₹4.9 L (42.5%)Rejected-Finance | L 4 | Rejected-Finance Reject | |
| 5 | L 5₹16.8 L+₹5.3 L (45.7%)Rejected-Finance | L 5 | Rejected-Finance Reject |
| Sl No | Description | Qty | Unit | H.N.SINGH AND COMPANY L1 | ABTAR SINGH AND COMPANY L2 | Kamlesh L3 | Kathla Bore Well L5 | SHREE SAI BORE WELL L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Transportations of rig along with allied accessories complete including errection and leveling at site, through all kinds of roads, approaches fields of roads, approaches fields etd. In all leads and lifts completed in all respect as per the direction of Engineer-in-charge. | 1 | Job | 23,000 ₹23,000 Lowest | 25,000 ₹25,000 | 28,000 ₹28,000 | 45,000 ₹45,000 | 40,000 ₹40,000 |
| 2.00Earth work in foundation fordigging tube well in all kind of soil including dewatering shoring shuttering from ground level up to 5 meter including disposing excavated soil within all leads and lifts as per the direction of Engineer-in-charge. | ||||||||
| 3.00 | With direct Rotary Rig Drilling 0 to 3 metre. | 3 | Running metre | 8,300 ₹24,900 Lowest | 9,000 ₹27,000 | 9,500 ₹28,500 | 11,000 ₹33,000 | 11,000 ₹33,000 |
| 4.00Drilling of bore as per specification laid down in IS 2800-1991 (Part-1) with upto date amendments, if any with percusion rig or rotor rig or combination drilling rig starting with 650-600 milimetre dia mild steel pipe reduced to 450 to 400 milimetre dia mild steel pipe conforming to IS-4270-2001 with upto date amendments, if any in all kinds of soils, boulders rock collapsible strata, saturated soils, artesian conditions including the cost of all consumable stores, water fuel, lubricants and other accessories etc. with in all leads and lift completed in all respect as per the direction of Engineer-in-charge. | ||||||||
| 5.00 | Drilling and lowering of mild steel casing pipes conforming to IS 4270-2001 with upto date amendment if any of suitable size as mentioned above, from 0-30 metre below ground level within all leads and lifts. | 27 | Running metre | 8,800 ₹2,37,600 Lowest | 9,500 ₹2,56,500 | 10,500 ₹2,83,500 | 11,999 ₹3,23,973 | 12,000 ₹3,24,000 |
| 6.00 | Drilling and lowering of mild steel casing pipes conforming to IS 4270-2001 with upto date amendment if any of suitable size as mentioned above, from 30-60 metre below ground level within all leads and lifts. | 30 | Running metre | 9,000 ₹2,70,000 Lowest | 9,800 ₹2,94,000 | 10,500 ₹3,15,000 | 12,800 ₹3,84,000 | 13,000 ₹3,90,000 |
| 7.00 | Drilling and lowering of mild steel casing pipes conforming to IS 4270-2001 with upto date amendment if any of suitable size as mentioned above, from 60-80 metre below ground level within all leads and lifts. | 20 | Running metre | 9,700 ₹1,94,000 Lowest | 10,000 ₹2,00,000 | 11,000 ₹2,20,000 | 13,500 ₹2,70,000 | 13,500 ₹2,70,000 |
| 8.00 | Collection preservation and display of suitable size sample box with top lid and J locking arrangement till handing over of the tube well to the department complete in all respect as per the direction of Engineer-in-charge. | 1 | Number | 1,000 ₹1,000 Lowest | 1,200 ₹1,200 | 1,000 ₹1,000 Lowest | 2,000 ₹2,000 | 1,500 ₹1,500 |
| 9.00 | Providing and fixing mild steel taper/reduucer as per lengths approved by the Engineer-in-charge the material of mild steel taper/reducer shall be equivalent to parent pipe material and shall conform to chemical composition as per clause 5.2 and mechanical properties as per clause 6.1 and table 1 of IS 4270-2001 with upto date amendments, if any complete in all respect as per the direction of Engineer-in-charge. | 1 | Number | - | - | 2,500 ₹2,500 Lowest | 3,000 ₹3,000 | 2,800 ₹2,800 |
| 10.00 | Supply and lowering of IS marked electric resistance welded mild steel pipe 200 milimetre dia nominal size housing, 6.40 milimetre thick having out side dia metre 219.10 milimetre bevelled edge conforming to IS 4270-2001 with upto date amendments if any about 4 metres to 7 metres in length, welded without any circumferential joints into bore hole in vertical position including cost of all scaffolding derricks, poles, clamps embedded in foundation etc. including cost of all cutting threading and welding of pipes etc. with in all leads and lift completed in all respect as per the direction of Engineer-in-charge. | 65 | Running metre | 3,000 ₹1,95,000 Lowest | 3,200 ₹2,08,000 | 3,700 ₹2,40,500 | 4,300 ₹2,79,500 | 4,200 ₹2,73,000 |
Tender Value
₹13.4 L
EMD Value
₹26,720
Closing Date
19 May 2021, 11:00 amClosed
EXECUTIVE ENGINEER
JAL SHAKTI DIVISION PALAMPUR
Drilling lowering assembly and development tube well 80 meter deep at Ashanpatt road
2021_HPIPH_47424_1
HPIPH- 1738-68 DT. 12.05.2021
Open Tender
Civil Works
Item Rate
90 days
J S D Palampur
Please refer Tender documents.
9 documents required · 9 mandatory
₹400
₹26,720
Yes
19 Nov 2025
12 May 2021
19 May 2021
12 May 2021
19 May 2021
12 May 2021
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .