SPECIAL REPAIR IN BLDG NO P 906 A LIVING FOR MESS STAFF OF OFFICERS MESS HQ CORPS ARTY BDE CAMP AND OTHER SANCTION WORKS UNDER THE AREA OF AGE BR I OF GE ARMY CENTRAL JODHPUR (9121/E8)

Amount

Note:- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are required to quote their rates accordingly. (ii) Makes of materials will be approved by GE in writing before commencement of work.

M&L for 25 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) to receive floor finishes etc., including necessary formwork, complete all as specified and as directed by Engr-in-Charge.

M&L for 16-18mm thick Udaipur green marble machine cut in cooking platform laid over 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing and rounding the edges, complete all as specified and as directed by Engr-in-Charge.

M&L for coloured glazed ceramic tiles (Premium quality) 300 x 450 x 6-7 mm thick, as in verticle surface/skirting/dado, including & over 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE, complete all as specified and as directed by Engr-in-Charge. Make : Kajaria/ Somany/ Johnson as approved by GE.

M&L for coloured non skid ceramic tiles (Premium quality) 400 x 400 x 6-7 mm thick, as in floor etc set jointed and pointed in white or coloured cement to match the tile over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed by Engr-in-Charge. Make : Kajaria/ Somany/ Johnson as approved by GE.

M&L for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L Rendering 10mm thick in CM 1:4 on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth, complete all as specified and as directed by Engr-in-Charge.

Taking down chowkat with shutters (without taking off shutter from frame) size area not exc1.50 Sqm each, complete all as directed by Engr-in-Charge.

Taking down chowkat with shutters (without taking off shutter from frame) size area exc 1.50 sqm but not exc 4.0 sqm each, complete all as directed by Engr-in-Charge.

S&F PVC door frame finish of size 50mmx 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube, complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B-1 Mix (using 20mm graded crushed stone aggregate) as in bed block for hold fast including necessary form work, complete all as specified and as directed by Engr-in-Charge.

Taking down of steel window and ventilators, complete all as directed by Engr-in-Charge.

S&F factory made box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified and as directed by Engr-in-Charge. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.

S&F factory made box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete without glazing bars, dovetailed or welded, complete all as specified and as directed by Engr-in-Charge. Note : Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.

S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars, complete all as specified and as directed by Engr-in-Charge.

S&F of box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete without glazing bars, complete all as specified and as directed by Engr-in-Charge.

Supply and fabrication of Mild steel guard bars, grills, grating, and similar work and welded to window frames, door frames (made up of angle), balcony railing and similar work, confirming to FE 290, gde E-165 etc., complete all as specified and as directed by Engr-in-Charge.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm, complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by Engr-in-Charge.

S&F of Stainless steel butt hinges medium weight, cold rolled of size 100 mm size, complete all as specified and as directed by Engr-in-Charge.

S&F of mild steel butt hinges medium weight, cold rolled of size 100 mm size, complete all as specified and as directed by Engr-in-Charge.

S&F of mild steel barrel tower bolt 200 mm long stove enamelled black with bright bolt, complete all as specified and as directed by Engr-in-Charge.

S&F Mild steel pressed handles 150mm size, oval type, stove enamelled black, pattern and design, complete all as specified and as directed by Engr-in-Charge.

S&F of mild steel sliding door bolt 300 mm long stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate, complete all as specified and as directed by Engr-in-Charge.

S&F 150mm double action spring hinge, brass with phosphorus bronze wire spring bright polished, complete all as specified and as directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incld punching or drilling out old glazing pins/ spring clips and provding and fixing new ones, complete all as specified and as directed by Engr-in-Charge.

M&L for two coat of synthetic enamel paint over a coat of pink primer on new wooden/old wooden surface including preparation of surface, over 10cm width or girth, complete all as specified and as directed by Engr-in-Charge.

Taking up or down GI steel /CPVC water tubing 15 mm bore and connection, including cleaning for refixing or remove to site or credit, complete all as directed by Engr-in-Charge.

Taking up or down GI tubing/CPVC 20 mm bore and connection, including cleaning for refixing or remove to site or credit, complete all as directed by Engr-in-Charge.

S&F in repairs decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and as directed by Engr-in-Charge.

S&F 200mm long aluminium anodised tower bolt, complete all as specified and as directed by Engr-in-Charge.

S&F 150mm long aluminium anodised handle extruded section, complete all as specified and as directed by Engr-in-Charge.

S&F for 4 mm thick figurred , pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane, complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of the new surfaces of steel & applying two coats of synthetic enamel paint over one coat of red oxide primer over 10cm width or girth, complete all as specified and as directed by Engr-in-Charge.

Supply, laying, testing & commissioning of 16 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and as directed by Engr-in-Charge.

Supply, laying, testing & commissioning of 20 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and as directed by Engr-in-Charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and as directed by Engr-in-Charge.

S&F in repair of bib cock with flange 15mm dia, chromium plated, cast copper alloy, fancy type, screwed for iron pipe or for brass ferrule, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar cat No. ORP-10037PM or its equivalent model in Kohler/ Cera as approved by GE.

S&F in repair Fancy type Chromium plated over head shower 120 mm dia with arm, round shape, single flow (ABS body CP with gray face plate) with Rubit cleaning system, suitable for 15mm bore pipe, including fixing to steel pipe or union, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar Cat No. OHS-1789 or equivalent in Kohler/ Cera as approved by GE.

S&F in repairs angular stop valves cast copper alloy chromium plated (ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar cat No. ALI 85053 or its equivalent model in Kohler/ Cera as approved by GE.

S&F in repairs angular stop valves cast copper alloy chromium plated (ISI marked) screwed down high pressure fancy type screwed both ends for 20/25mm bore of iron pipe or union, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar cat No. ALI 85053 or its equivalent model in Kohler/ Cera as approved by GE.

S&F Pillar taps 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar Cat No. ALI-85001 or its equivalent in equivalent in Kohler/ Cera as approved by GE.

M&L for 75mm outlet diameter PVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), complete all as specified and as directed by Engr-in-Charge.

S&F single towel rail 600mm long fixed with chormium plated brass screws, complete all as specified and as directed. Make : Jaquar Cat No. AKP-35711P or equivalent in Kohler/ Cera as approved by GE.

M&L for 7.5cms thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, not exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge.

S&F of Vitreous China wash basin size 450 x 300mm with padestal, white, flat back, including CP waste coupling, waste pipe, PVC Connection 300 mm long, brackets, complete all as specified and as directed by Engr-in-Charge. Make : Hindware/ Parryware/ Cera as approved by GE.

S&F in repair vitreous china squatting Pan, Orissa Pattern of size 580X440mm white with integral foot rests and cast iron `P' or `S' trap front or back fixed in repairs Including connection to trap etc and provision of cement concrete bedding and making good to floor, complete all as specified and as directed by Engr-in-Charge. Make : Hindware/ Parryware/ Cera as approved by GE.

Dismantaling of cast iron/PVC soil waste & vent pipes 100/110mm dia including all fittings etc., complete all as specified and as directed by Engr-in-Charge.

Dismantaling of cast iron/PVC soil waste & vent pipes 75mm dia including all fittings etc., complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors of suitable size complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors of suitable size complete all as specified and as directed .

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, with MS clamps of suitable size complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, with MS clamps of suitable size complete all as specified and as directed by Engr-in-Charge.

S&F 75 mm bore (SWR) PVC bends any radius with access door complete all as specified and as directed by Engr-in-Charge.

S&F 110 mm bore (SWR) PVC bends any radius with access door complete all as specified and as directed by Engr-in-Charge.

S&F for 100mm dia PVC cowls, diminishing pieces or tapers (larger bore measured), complete all as specified and as directed by Engr-in-Charge.

S&F10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, complete all as specified and as directed by Engr-in-Charge. Make:- Hindware / Parryware / Cera as approved by GE

S&F 32mm bore low or high density polyethylene waste pipes (LDPE) of pressure rating 6Kg/Sqm fixed complete to walls, ceiling or floors etc, complete all as specified and as directed by Engr-in-Charge.

S&F in repair 15mm bore PVC connection for flushing cistern 600mm long best quality with PTMT nuts, complete all as specified and as directed by Engr-in-Charge.

M&L 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor , hard standing flooring finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished complete including forming joints in 2 mtr interval including necessary formwork laid in alternate bays and filled with bitumen mastic any description, complete all as specified and as directed by Engr-in-Charge.

Taking down existing roof treatment in any postion and any thickness on RCC roof slab and debries to be disposed out of MOD land, complete all as directed by Engr-in-Charge.

M&L for carrying roof treatment infollowing stages:- Applying neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following stage as roof treatment complete all as specified and as directed by Engr-in-Charge : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 2.25 Kg/Sqm using butane torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen confirming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause No. 21.3, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item.

M&L for Plain cement concrete 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) over roof for making good depression/undulation and as in roof kerb to match the existing, complete all as specified and as directed by Engr-in-Charge.

S&F 500 ltrs capacity rotational moulded polythene water storage tank (white colour) three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms complete all as specified and as directed by Engr-in-Charge. Make:- Sintex / Rotex as approved by GE

Dismantling existing water tank of capacity exc 500ltrs and not exc 1000 ltrs and removing from site, complete all as directed by Engr-in-Charge.

S&F 1000 ltrs capacity rotational moulded polythene water storage tanks (white colour) three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms complete all as specified and as directed. Make:- Sintex / Rotex as approved by GE

"Supply only" integral water proofing compound (ISI marked), complete all as specified and as directed by Engr-in-Charge.

M&L for Precast cement concrete solid building blocks 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in 1:4 cement mortar, complete all as specified and as directed by Engr-in-Charge.

M&L for providing Precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in kerb stone etc., (of any section as approved) with plain faces, including rounded or chamfered angles, weathering, throating etc., and setting in cement mortar 1:4 complete with joints to match, complete all as specified and as directed by Engr-in-Charge.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft /loose soil, complete all as specified and as directed by Engr-in-Charge.

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm gradded crushed stone aggregate) as in sub base for flooring, complete all as specified and as directed by Engr-in-Charge.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr-in-Charge.

S&F Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floors with no pigment, over & including 20 mm thick screed bed in CM 1:6, complete all as specified and as directed by Engr-in-Charge.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc, complete all as directed by Engr-in-Charge.

M&L for fixing TMT bar 12 mm dia by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc., complete all as specified and as directed by Engr-in-Charge.

M&L for cleaning the existing reinf of slabs, chajjas etc., & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface, complete all as specified and as directed by Engr-in-Charge.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack, complete all as specified and as directed by Engr-in-Charge.

M&L for 15-20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat, complete all as specified and as directed by Engr-in-Charge.

M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth, complete all as specified and as directed by Engr-in-Charge.

S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc., complete all as specified and as directed by Engr-in-Charge.

S&F MS chromium plated peg set of five fixing with wall, complete all as specified and as directed by Engr-in-Charge.

S&F Soap Dish, viterous china white, approximate size 160 x 160 x 90 mm, fixed with CP brass screws, complete all as specified and as directed by Engr-in-Charge. Make : Cera / Hindware / Parryware as approved by GE

S&F liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden plastic cleats (Min weight 105 gms), complete all as specified and as directed by Engr-in-Charge.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and as directed by Engr-in-Charge.

M&L for 15mm thick rendering in cement mortar 1:4 on stone masonary surfaces , finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in coping/ benching, DPC, pier caps, bed blocks, for hold fast etc., including mixing with WPC and necessary form work, complete all as specified and as directed by Engr-in-Charge. Note:- WPC shall be measured and paid separately.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft / loose soil complete all as specified and as directed .

M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation and filling of manholes and in haunching against the sides of pipe on existing PCC bed , complete all as specified and as directed by Engr-in-Charge.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm, complete all as specified and as directed by Engr-in-Charge.

Removing excavated soil not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and as directed by Engr-in-Charge.

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3, complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of newly plastered/ old plastered surfaces of walls and applying two coats of oil bound distemper including 2 coat of wall care putty, complete all as specified and as directed by Engr-in-Charge.

Preparation of new stone/ old stone surfaces and applying two coats of cement based paint on new concrete walls, complete all as specified and as directed by Engr-in-Charge.

M&L for hard core broken stone of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, water and rammed to a true surface, with power roller, complete all as specified and as directed by Engr-in-Charge.

M&L for 100mm thick cement concrete 1:4:8 type D-2, as in sub base to floor, complete all as specified and as directed by Engr-in-Charge.

M&L for three coats of white wash including preparation of new surfaces on walls all as specified and as directed by Engr-in-Charge.

M&L for three coats of white wash including preparation of new surfaces as on ceilings all as specified and as directed by Engr-in-Charge.

Use and waste of formwork to sides and soffits of slabs not exc. 200mm thick and similar works fair finished surfaces of concrete, complete all as specified and as directed by Engr-in-Charge.

Form work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs not exc 20cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10cm but not exc 20cm wide with fair finished surfaces, complete all as specified and as directed by Engr-in-Charge.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces, complete all as specified and as directed by Engr-in-Charge.

M&L RCC, M-25, design mix (using 20mm graded aggregate) as in slab supported on wall, roof slab, chajja and in shelve etc., complete all as specified and as directed by Engr-in-Charge.

M&L RCC, M-25, design mix (using 20mm graded aggregate) as in beam, cantilevers, bressummers, lintel overone meter span, complete all as specified and as directed by Engr-in-Charge.

S&F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam, slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and as directed by Engr-in-Charge.

S&F mild steel TMT bar 5 dia and over upto and including 10mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc., hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clip, complete all as specified and as directed by Engr-in-Charge.

Writing letters or figures (Black Roman, Italic or Indian) not exc 30cm high with thick paint, complete all as specified and as directed by Engr-in-Charge.

Excavating over areas, not exc 1.5m deep and getting out in any type of soil, complete all as specified and as directed by Engr-in-Charge.

M&L for Jodhpur stone of roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in cement mortar 1:3, complete all as specified and as directed by Engr-in-Charge.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in roof Padding, the surface of concrete is to be finished even and fair, without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L for Walling of random rubble, uncoursed, well bonded, bedded solidly hearted, built in CM 1:6, complete all as specified and as directed by Engr-in-Charge.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including polishing and rounding the edge, complete all as specified and as directed by Engr-in-Charge.

Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar, complete all as specified and as directed by Engr-in-Charge.

S&F Anodised aluminium frame powder coated for doors, windows ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Engr-in-Charge.

S&F Anodised aluminium window/ ventilator shutter (fixed type) powder coating of any colour (Thickness of powder coating not less than 50 micron), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws etc., complete all as specified and as directed by Engr-in-Charge.

S&F decogrill for aluminium window/ventilator, complete all as specified and as directed by Engr-in-Charge.

S&F in repair vitreous ware wash down water closet [Pedestal Pattern], white [ETWC] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc.,& provision of cement concrete making good to as existing floor, complete all as specified and as directed by Engr-in-Charge. Make:- Hindware / Parryware / Cera as approved by GE

S&F for Framed work as in doors of gates of angles or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete (Fe-410W (Gde-E-250) quality-A), complete all as specified and as directed by Engr-in-Charge.

Providing Precast cement concrete 1:2:4 type B-1 in CM 1:6 (using 20mm graded crushed stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc., (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match, complete all as specified and as directed by Engr-in-Charge.

M&L for 75mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in sub base of floors, finished the surface even and rough, complete all as specified and as directed by Engr-in-Charge.

Excavation in post holes (or similar holes each not exc 0.50 cum) getting out, returning and filling in any type of soil, complete all as specified and as directed by Engr-in-Charge.

M&L PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass-concrete, complete all as specified and as directed by Engr-in-Charge.

M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde E-250) quality A, complete all as specified and as directed by Engr-in-Charge.

M&L Prepainted galvalume aluminium zine coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge.

M&L rolled mild steel Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc., wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and as directed by Engr-in-Charge.

M&LWriting letters or figures (Black Roman, Italic or Indian) of any description, not exc 10cm in width or girth when unconnected with other painting or when painted in a different tint, complete all as specified and as directed by Engr-in-Charge.

S&F mild steel screw bolts (machine made) with hexagonal or square head and one end screwed or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but not exc 10cm long, complete all as specified and as directed by Engr-in-Charge.

"Supply only" chain link MS Galvanised fencing any size or type, complete all as specified and as directed by Engr-in-Charge. Note:- BOO will be consituted to determine the weight of chainlink fencing.

"Fixing only" chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire, complete all as specified and as directed by Engr-in-Charge.

S&F MS round bars 10mm dia cut to length bent to shape required including cranking bending spiarally for hopping for column hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to IS, complete all as specified and as directed by Engr-in-Charge.

S&F for 3mm thick plain sheet glass ordinary quality & glazing with oil putty in square not exc 0.50sqm in each pane, complete all as specified and as directed by Engr-in-Charge.

S&F factory made flush shutters 35 mm thick, solid core construction, with block board and plywood face panels, both faces is covered with decorative face veneer with lipping/frame to match with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process, complete all mortic lock and handel arremgment, complete all as specified and as directed by Engr-in-Charge.

S&F factory made flush shutters 35 mm thick, solid core construction, with block board and plywood face panels, both faces is covered with decorative face veneer with lipping/frame to match with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process, complete all mortic lock and handel arremgment, complete all as specified and as directed by Engr-in-Charge.

M&L of 20-25 mm thick machine cut KOTA stone slab as in shelves (Single piece) fixed in walls machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, including rubbing and Mirror polishing, complete all as specified and as directed by Engr-in-Charge.

Demolition of brick work/stone masonary built in cement mortar including all quoins, pillars, etc., removal of unserviceable materials, debris, rubbish to outside MD land, complete all as specified and as directed by Engr-in-Charge.

M&L for facework masonary with 100-125 mm thick white/chitter sand stone having rock face bushings not less than 15-20mm including chisel drafted margin 20-25mm wide all as per local jodhpur pattern (KADAOU) regular coursed well bonded bedded & solidly hearted built in CM 1:4 Height of kadaou stone course shall not be less than 200mm at site, complete all as specified and as directed by Engr-in-Charge.

M&L for keyed pointing to kadaou facework of jodhpur sandstone in CM 1:3 using white cement & pigment to match the shade of the stone, complete all as specified and as directed by Engr-in-Charge.

M&L for framed work using MS angle iron Fe 410-W(Gde E- 250) quality A, rectangular hollow sections, solid bars, flat iron, MS channel sections, or hollow structural tubes etc including necessary cutting & bending to shape & welding together complete as in gates, cattle traps, overhead trusses, railings etc complete all as per the design & patterns complete all as directed at site

M&L for welding cast iron designer pieces like spikes, spiral patterns & moulding pieces etc with intricate designs to the steel gate frame work, complete all as specified and as directed by Engr-in-Charge.

M&L for fixing letters fabricated from 2mm thick stainless steel sheet with mirror optic finish complete of size 20-35 cm height in English/hindi fonts complete with nut 7 bolts, complete all as specified and as directed by Engr-in-Charge.

M&L for 0.63mm Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc., as required, complete all as specified and as directed by Engr-in-Charge.

Demolition of Cement concrete in ground floors and pavings not exc 15cm thickness below or above ground level) and removing debris out of MOD land, complete all as specified and as directed by Engr-in-Charge.

Demolition of Cement concrete (including cutting of reinforcement if any) in any description and any position not otherwise specifically provided for and removing debris out of MOD land, complete all as specified and as directed by Engr-in-Charge.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete including racking out joints, hacking for key scrubbing down with water, complete all as specified and as directed by Engr-in-Charge.

M&L for salt glazed stoneware drain pipes 150mm dia (internal) grade 'A' laid in trenches and jointed in CM(1:1) including taking down old UNSV pipe, complete all as specified and as directed by Engr-in-Charge.

S&F 150mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed by Engr-in-Charge.

M&L for cement concret 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) bed to drain pipe 150 mm dia including packing under and hunching against the pipe after they are laid including necessary formwork, complete all as specified and as directed by Engr-in-Charge.

S&F 35mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a), complete all as specified and as directed by Engr-in-Charge.

M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and as directed by Engr-in-Charge.

S&F 35 mm thick second class hard wood factory made plain, framed, panelled shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engr-in-Charge.

E/M ITEMS Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittings etc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces, complete all as directed by Engr-in-Charge.

Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing caping including earth wire and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed by Engr-in-Charge.

M&L for modular point wiring using approved colour coding as per IS Red, Black and green for single phase with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable (RYBN) 1100 volts grade confirming to IS 694 marked with valid CML No., drawn through and including non metallic rigid 20 mm dia PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc ISI marked with valid CML No. (IS 9537 - 1983) fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FRLS cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including modular sunken pressed steel flush metal terminal boxes with modular sheet of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of modular switches, sockets, fan regulators complete for the following, complete all as specified and as directed by Engr-in-Charge :- (a) One light/fan/bell point controlled by one, one way switch.

- Ditto- All as per item No. 156.00 here-in-above but one 3 pin 5 or 6 Amps socket outlet on same board.

-Ditto- All as per item No. 156.00 here-in-above but one 3 pin 5 or 6 Amps socket outlet on independent board, complete all as specified and as directed by Engr-in-Charge.

-Ditto- All as per item No. 156.00 here-in-above but with 2.5 Sqmm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board.

S&F modular switch 1 way 6 Amp, ISI marked, 1 module, single pole, complete all as specified and as directed by Engr-in-Charge. Make : Legrand/ ABB/ Schneider

S&F modular switch 1 way 16 Amp ISI marked,, single pole, complete all as specified and as directed by Engr-in-Charge. Make : Legrand/ ABB/ Schneider

S&F modular socket outlet 6 Amp, 3/5 pin, ISI marked, complete all as specified and as directed by Engr-in-Charge. Make : Legrand/ ABB/ Schneider

S&F modular socket 6 Amp/ 16 Amp, 6 pin, 2 in 1, ISI marked, complete all as specified and as directed by Engr-in-Charge. Make : Legrand/ ABB/ Schneider

S&F modular fan step regulator, 120W, 2 module, hum free and connecting electrically, complete all as specified and as directed by Engr-in-Charge. Make : Legrand/ ABB/ Schneider

S&F modular type, ceiling rose surface bakelite 3 terminals 230 Volts AC with polycarbonate body, complete all as specified and as directed by Engineer-in-Charge. Make : Anchor/ Legrand/ Havells

S&F connecting, and commissioning of street light fitting 30/45 watt LED , IP-65 protection, single piece pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired including 1.50 mtr long 32mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified and as directed by Engr-in-Charge. Make : Philips/ Bajaj/ Havells

S&F exhaust fan, made of sturdy Engineering plastic body, complete with louvers shutter, 250 mm sweep, 1200 RPM, 230 V 50 Hz, AC single phase, complete with louvers including fixing/grouting of frame & connecting with & including 3 core PVC insulated copper conductor flexible cable of size 23/0.0076 (or eq. Size in mm) from ceiling rose to fan, complete all as specified and as directed by Engr-in-Charge. Make : Havells/ Bajaj/ CG

S&F insulated batten lamp holder metal cased body of brass with back plate suitable for batten fittings including 9 watt LED lamps, ISI marled, complete all as specified and as directed by Engr-in-Charge. Make : Legrand/ ABB/ Schneider

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-Charge. Make : Bajaj Cat No. BCLSB 20 WH or Equivalent in Philips/ Havells as approved by GE.

S&F Prewired distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 8 way, double door, 240 V for fixing MCB's, IP 43 protection, complete all as specified & directed by Engg.-in-charge. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface. Make : Legrand/ ABB/ Schneider

S&F Prewired distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 4 way, double door, 240 V for fixing MCB's, IP 43 protection, complete all as specified & directed by Engg.-in-charge. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface. Make : Legrand/ ABB/ Schneider

S&F MCB single pole 230 volts rating from 6 to 32 Amps, with rupturing capacity 10 KA, 'C' Curve, ISI Marked, type, with over load and short circuit protection, complete all as specified and as directed by Engr-in-Charge. Make : Legrand/ ABB/ Schneider

S&F MCB single pole 230 volts rating from 10 to 32 Amps, with rupturing capacity 10 KA, 'C' Curve, confirming to IS/IEC 60898-1 2002, type, with over load and short circuit protection, complete all as specified and as directed by Engr-in-Charge. Make : Legrand/ ABB/ Schneider

S&F MCB single pole 230 volts rating from 63 Amps, with rupturing capacity 10 KA, 'C' Curve, confirming to IS/IEC 60898-1 2002, type, with over load and short circuit protection, complete all as specified and as directed by Engr-in-Charge. Make : Legrand/ ABB/ Schneider

S&F MCB SPN, 230 volts rating from 40 Amps, with rupturing capacity 10 KA, ISI Marked, type, with over load and short circuit protection, complete all as specified and as directed by Engr-in-Charge. Make : Legrand/ ABB/ Schneider

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sqmm 2 Core nominal cross section in service connections, complete all as specified and as directed.

S&F for in repairs sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 4 Sqmm and one run of 2.50 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed by Engr-in-Charge. NOTE: Two runs of 4.00 sqmm cable with one run of 2.50 sqmm cable as earth wire and PVC conduit shall be measured & paid for as one length.

S&F for in repairs sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 4 Sqmm and one run of 4.00 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, (ISI marked) concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc., complete all as specified and as directed by Engr-in-Charge. NOTE: Two runs of 4.00 sqmm cable with one run of 4.00 sqmm cable as earth wire and PVC conduit shall be measured & paid for as one length.

S&F connecting, and commissioning of street light fitting 35 watt LED , IP-65 protection, single piece pressure dia cast aluminium alloy housing high immpact 4 mm thick heat resistant toughned clear glass cover for lamp and matrix of LEDs in built electronic driver upto 4 KV surge protection device and setting& input power 35 W system lumens 85/W operating voltage 160-260 V contror gear compartment with high voltage, Prewired including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified by Engr-in-Charge Make : Philips/ Bajaj/ Havells

M&L for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised iron wire of size 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion, complete all as specified and as directed by Engr-in-Charge. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

Note:- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

M/S KAUTILYA GARG