Construction of Bsic Amenities such as Service shed 6 Nos near road side Loos at Different Locations in Ward No.08,09,13,18 and 21

Earthwork in foundation & plinth trenches within 50mtr initial lead, 1.5m initial lift including rough dressing and breaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per direction of the Engineer-in-charge (Unit-100 cum)

Fiilling in foundation & plinth with sand, incl. watering & ramming as per direction of Engr.-in-charge

C.C.(1:3:6) with 40mm CBHG metal including cost,carriage and royalty of materials

R.C.C work of M-20 grade incl.centering & shuttering etc. complete in all respect Grade Beam

Lintel

Supplying fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification

Fly ash Brick massonary in c.m. 1:6 having crushing strength 75kg/cm2 with cost carriage of all materials etc Foundation & Plinth

Fly ash Brick massonary in c.m. 1:6 having crushing strength 75kg/cm2 with cost carriage of all materials etc Superstructure

16mm.th. C.P.(1:6) on brick or stone work

12mm thick cement plaster in CM(1:6) over brick work

Fixing vertifies tiles in floor,treads &landing on 25mm. th.bed of CM(1:1) jointed with neat cement slurry etc.complete in all respect.

Fixing tiles in dados,skirtings & risers of steps on 12mm.th.C.P(1:3) jointed with neat cement slurry etc.complete in all respect

Supplying, fitting and fixing M.S. iron grill of approved design as directed by Engineer-in-charge and placing in proper position including cost, conveyance, taxes with all labour and T&P required for the work etc. complete in all respect.

Providing and fixing 65mm x 125mm factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other Frames/chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (Make: WPC:Century/Black Cobra/Rajshri Plastiwood, Hardware fitting: Godrej/Dorset/Link/Dorma)

Providing and fixing 30mm factory made single extruded WPC (Wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (Maximum toxicity index of 12 for 100 gms) having minimun density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade matt finished 3 Nos butt hinges of size 100mmx60mmx2.5mm, 1 No 250mmx16mm AIdrop, 1 No 150mmx16mm tower bolt, 2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-charge. (Make: WPC:Century/Black Cobra/Rajshri Plastiwood, Hardware fitting: Godrej/Dorset/Link/Dorma)

Supplying, fitting and fixing G.I. Pipe of approved design as directed by Engineer-in-charge and placing in proper position including cost, conveyance, taxes with all labour and T&P required for the work etc. complete in all respect. MS Hollow sqare pipe (60 x60x5mm)

Supplying fitting & fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000mm width & total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost of sheet & all fitting

Supplying Fitting & Fixing of Faibour Chair including all cost etc

Supplying of Gorgej Steel Almirah including all cost etc.

Wall painting one coats with wall cement primer (water bound) etc complete with all cost

Wall painting two coats with plastic emulsion paint

Painting two coats with approved paint over new wood & iron work.

Decorative vareity of fine art with touch wood polishing

ELECTRIFICTION Recessed wiring to light points/fan points/exhaust fan/ call bell point with 1.5m2 F.R. PVC insulated SC multistrand Copper conductor of ISI marked with 20mm non-metalic PVC flexible Conduit with 5A 250 V. Piano type Switch ISI marked and ceiling rose of ISI marke mounted on MS box having front bakelite cover of suitable size, MS box with 1.5mm2 F.R. PVC insulated SC multistrand Cu. conductor as earth wire including all accessories and connections as per direction of Engineer in charge (Make of wire- Finolex/Havels/Anchor) Group - A (Light point)

Group - B (Fan point)

Plug Point

Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/ L&T/ Anchor/Havels/V Guard) 2 x 1.5 mm2 + 1 x 1.5 mm2 =

S/F of 5 Step electronic Fan regulator of Anchor make (Cat. No. 33070/Cona No.7066)

S/F. of 48" AC Ceiling fans complete of Usha Ergo/Baja Elegance lvory make.

Angle holder

Installation CFL Light (15 watt)

Cost of Photo & Signboard