Installation of 250 kVA DG Set at FACT Ammonia Handling, WI.

Installation of 250 kVA DG Set at FACT Ammonia Handling, WI.

Loading the DG set, changeover panel and associated cables from FACT Cochin Division store, transportation to FACT Ammonia Handling,WI, unloading at Q10 berth, leading , safe handling and erection of DG set at Q10 berth. The truck, crane, lifting tackles required for transportation,loading, unloading shall be arranged by contractor.

RCC concrete bed/foundation preperation for Cooper make 250 KVA DG set as per OEM standard. The scope of work includes earth excavation, concrete/brick work chipping, removal of laterate, vegetation, casting of bed ( size 5770 x 2970 x 500 mm as per relevant standard Concrete mixure of 1:2:4 ratio, surface finishing. Supply of cement, sand, 20mm aggregate, 8mm bar (20cm x 20cm mesh, edge with bend up 20 cm height), shutter and etc..complete for the above shall be in the scope of the contractor. An additional extension shall be provided suitable to mount a AMF panel of foundation size 1m*0.5m and height of 1.75m and the junction box supplied under item no: 14.

Providing sloped roof rain shelter with GI structural and truss work with high quality corrugated Aluminum roofing sheet. The height of DG Canopy is 1.9 m. The roof shall extend 1 metre from the foundation on all sides to provide sufficient protection from rain. All structurals shall be painted with two coats of anti-corrosive epoxy paint (grey colour) over two coats of suitable primer of approved brand. The epoxy primer shall be Zinc Phosphate primer and thinner used for the work shall conform to the brand specified by the manufacturer in the product literature

Extension of exhaust pipe. The scope of work includes connecting and extending the exhaust pipe as per the relevant standards. supplying and fixing 'B class' MS ERW pipes, as per manufacturer specification from the Generator silencer. A rain cap with loose grill shall be provided over the pipe’s mouth. The exhaust pipes shall be properly supported and secured where ever required. The exhaust piping should be connected via a flexible joint/ suitable bellows located on the engine exhaust outlet. All the piping and the erection shall comply with statutory authorities obligations.

Supply and erection of G.I. Pipe Electrode earth pit as per I.S. 3043 / 2018 and IS 732:2019. The scope of work also includes making earth pit, laying GI pipe earth electrode of min 50mm dia and 3 m length & earthing compound/charcoal, providing suitable earth connection clamps, pit inspection chamber and supplying its cast iron cover of min size(60cm*60cm) with handle. Earth resistance of each pit shall be measured and shall be less than 2 ohms. The earth pit number and earth resistance value shall be painted on the cover.

Termination of Single core Aluminium earth cables/strips. The scope of work shall include termination of all earth connections to terminals using suitable Aluminium lugs. All the materials required for the work including lugs, fastners, hardwares, earthing shim etc. shall be supplied by the contractor.

Supply of 650 Volt grade, 1c X 150 sqmm, PVC Insulated, Unarmoured Aluminium earthing cable as per IS 694, with latest amendments and with ISI marking & Cable length to be marked on every 5 Meters on the outer sheath.

Laying of 1c x 150 sqmm, PVC Insulated, Unarmoured Aluminium earthing cable for body and neutral earthing of the generator. The scope of work also includes excavation, drilling, minor civil works, back filling, routing through GI pipes etc.

Supply of 650 Volt grade, 1c X 50 sqmm, PVC Insulated, Unarmoured Aluminium earthing cable as per IS 694, with latest amendments and with ISI marking & Cable length to be marked on every 5 Meters on the outer sheath.

Laying of 1c x 50 sqmm, PVC Insulated, Unarmoured Aluminium earthing cable for body and neutral earthing of the generator. The scope of work also includes excavation, drilling, minor civil works, back filling, routing through GI pipes etc.

Supply of 650/1100 V, Aluminium conductor, 3.5C x 400 sqmm (FR),Flat/round Steel armoured,PVC/XLPE insulated,PVC sheathed Cableconforming to IS 1554/Part I of 1988 or IS 7098 Part I, with latestamendments and with Cable length & ISI marking, to be marked on every5 Meters on the outer Sheath of the Cable. Acceptable make: Polycab,KEI, Finolex, Universal,RR cable,RPG,Apar.

Laying, clamping of power cables of size upto 3.5 c x 400 sq. mm. The scope of work includes laying of cables through walls/floors / /drilling / Chipping/breaking/ sand removal and minor civil work.The scope shall include excavation if required. All materials and tools required for clamping and laying such as aluminium clamps/nylon ropes,bolts, nuts, washers, S.S cable tags, etc shall be supplied by the contractor.

Supply and laying of 1c*240 sqmm (FR) 1100 Volt grade, PVC insulated, unarmoured, flexible cable with bright annealed, multistranded, bare copper conductor conforming to IS 694 Part I of 64, with latest amendments.

Supply of power junction box suitable for termination and interconnection of of 2 runs of 3.5c*400 sqmm Al armoured cable and 8 runs of 1c*240 sqmm Cu flexible cable. The junction box shall be weatherproof type (min IP54) suitable for mounting outdoors and shall be supplied with all accessories required for interconnecting two sets of Al and Cu cables of above sizes.

Installation and commisioning of power junction box supplied under item no:14. The work shall include mounting on foundation using suitable anchor bolts, glanding and termination of 2 runs of 3.5c*400 sqmm Al armoured cable and termination of 8 runs of 1c*240 sqmm Copper flexible lead. The Nickel plated Brass Double Compression type cable gland suitable for the cable, Al and Cu cable lugs and protective pipe/hose for laying flexible Copper cable shall be supplied by the contractor.

Rerouting of power cables of size upto 4c x 300 sq. mm. The work shall include removing glands and clamps,and re-laying the same cable including clamping and re-glanding. Payment shall be made based on length of the cable rerouted.

Glanding and termination of power cables of size upto 3.5c x400sq.mm. The scope of work includes glanding , termination and connection of cables with suitable cable lugs, ferrules, arranging and dressing the leads / cables and clamping/tying to supports etc. The Nickel plated Brass Double Compression type cable gland suitable for the cable shall be supplied by the contractor

Supply and installation of standard 415V danger notice boards of min 200mm * 150mm size as per IS 2551 (1982).

PEEJESS ELECTRICALS (BID ID -3312611)