Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹41.8 L+₹3.0 L (7.62%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
7 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) CHILODA
GE (AF) Chiloda, Lekawada Patia, PO CRPF Campus, Gandhinagar (Gujarat)-382042
PERIODICAL SERVICES AND WELCOME MAINTENANCE TO CERTAIN BUILDINGS IN AREA B AT AF STN WADSAR
2023_MES_593251_1
8912/2023-24/E8
Open Tender
Civil Works
Item Rate
270 days
WADSAR
As per NIT
7 documents required · 7 mandatory
₹500
GE (AF) CHILODA
₹80,000
Yes
1 Jul 2023
4 May 2023
9 Jun 2023
4 May 2023
7 Jun 2023
18 May 2023
4 May 2023 - 17 May 2023
Amount
M&L preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.
M&L preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L preparation of old plastred surfaces of wall and applying one coat of colour wash complete all as specified and directed.
M&L preparation of old plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed.
M & L for complete removal of existing treatment from old wall surfaces and applying two coats of oil bound distemper over sufficient coat of wall putty complete all as specified and directed.
M&L preparation of old surfaces of wall and applying one coat of cement based paint complete all as specified and directed.
M & L for complete removal of existing treatment from old wall surfaces and applying two coats of cement base paint complete all as specified and directed.
M&L preparation of old surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and directed.
M&L for preparation of existing treatment by scrappers or other means of wall surface and applying one coat of acrylic paint exterior grade complete all as specified and directed.
M&L for preparation of existing treatment by scrappers or other means of wall surface and applying two coat of acrylic emulsion paint exterior grade over a coat of primer complete all as specified
M&L preparation of old steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparation of old wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Demolition of brick work of any description and in any position , built in cement mortar complete all as specified and directed.
M&L brick work with Sub class 'B' Bricks straight or curved on plan exc 6.00 m mean radius and built in CM 1:6 complete all specified and directed.
Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint , haking for key scrubing with water etc. complete all as specified and directed.
M&L Rendering 15 mm thick on fair faces of concrete or block masonary in CM 1:6 finished even and smooth (without using extra cement ) in ineternal surfaces of wall complete all as specified and directed.
All as per item No 16 here in before but 10 mm thick in CM 1:6 and setting coat of 5mm thick CM 1:4 mixed with WPC in external surface of wall including scaffolding complet all as specified and directed. NOTE : WPC shall be measured and paid seperatly in relevants items of this schedule
All as per item No 16 here in before but 5mm thick in ceiling surfaces CM 1:3.
M&L preparation of new plaster surfaces of wall and applying two coat of distemper oil emulsion over a coat of primer over a sufficent coat of wall putty complete all as specified and directed.
M&L preparation of new surfaces of wall and applyong two coat of cement base paint complete all as specified and directed.
M&L preparation of new surface in ceiling and applying two coat of whitewash complete all as specified and directed.
Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolition of Concrete (unreinforced) of any description and in any position not otherwise specifically provided in cement concrete complete all as specified and directed.
M&L 25mm thick PCC 1:2:4 type B1 (20mm graded aggregate) as in levelling course complete all as specified and directed.
M&L 15mm thick Screed bed or bedding layer of mortar for laying floor finishes CM 1:6 complete all as specified and directed.
M&L for Non- skid Ceramic coloured tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in- Charge.
M&L for vitrified ceramic tiles 10mm thick light shade (square/ rectangular) polished area of each tiles exc 0.16 but not exceeding 0.36Sqm, in floor/skirting etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
All as per item No 27 here in before but in skirting all as specified and as directed.
M&L glazed ceramic coloured tiles size 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of CM 1:4 10mm thick etc complete all as specified and directed by Engineer-in Charge.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for wallcare tiles of size 75mmx240mmx6mm thick in vertical surfaces over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed by Engineer-in Charge.
M&L for Endura glazed tiles 8 -9 mm thick light/dark shade (square) area of each tiles 300 mm x 300 mm, in floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as insub base complete all as specified and directed.
M&L for Machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over sand cushion ( Note- Sand will be measured and paid separately)
M&L 25mm thick sand filling (sand cushioning) under path for layers interlocking tiles.
Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store all as directed.
All as per item No 36 here in before but 20mm dia.
S&F 15mm dia Steel tubing medium grade Galvanised with all fittings and fixed complete to wall and ceiling or laid in floors all as directed.
All as per item No 38 here in before but 20mm dia.
S&F in repair vitreous china white wash down water closet pan(pedestal pattern) including fixing bolts,plastic seat cover with jet spray and including necessary flexible pipe connection complete all as specified and removing debris out side MD land.
S&F in repair vitreous china squatting pan 'Orissa pattern of size 580 x 440 mm white with integral foot rest( excluding flushing cistern and flush pipe) squatting pan including connecting to 'P' trap and to flushing pipe complete all as specified and directed.
S&F in repair PVC valveless, syphonic action type, flushing cistern, low level with inlet, ball valve ,float and handle including brackets complete all as specified and directed. (The colour will also perfectly match with the EWC.)
S&F in repair Vitreous china white wash hand basin flat back of size 550 x400 mm including PVC waste pipe, PVC 15 mm dia 450 mm long with PTMT NUTS CONNECTION PIPE CP waste coupling including brackets cutting and pinning in ends of bracket complete all as specified and directed.
S&F in repair fancy type 15 mm dia CP bib tap cast copper alloy of minimum weight 400 gm with crutch or butterfly handle screwed down for iron pipe or union complete all as specified and directed.
S&F in repair fancy type 15 mm dia CP angle cock cast copper alloy of minimum weight 400 gm with crutch or butterfly handle both ends for iron pipe or for fixed union complete all as specified and directed.
S&F in repair fancy type 20 mm dia CP stop valves cast copper alloy of minimum weight 400 gm with crutch or butterfly handle both ends for iron pipe or for fixed union complete all as specified and directed.
S&F in repair 15 mm bore pillar taps fancy type ,cast copper alloy ,with capstain head, chromium plated, screwed down, high pressure, with or without letters cold or hot with long shank and fly nuts screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair brass chromium plated shower roses 125 mm size with swivel joints, any size including fixing to steel pipe or union. 15 mm dia CP stop valves cast copper alloy with crutch or butterfly handle both ends for iron pipe or for fixed union complete all as specified and directed.
S & F in repair brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long including brackets/flanges completed all as specified and directed.
S&F in repair Health faucet (ABS) with rubit cleaning system 1.25m long PVC flexible tube & ABS wall hook complete all as specified and directed.
S & F in repair SS jet with inlet pipe suaitable for EWC all as specified and as directed.
S&F in repair 75mm dia outlet CI nahani trap plain with S/S grating including jointing with solvent cement complete all as specified and directed.
S&F in repair Stainless steel grating with or without hole of size 150 mm complete all as specified and directed.
S&F in repair PVC waste pipe of 32mm dia complete all as specified and directed.
S&F in repair waste coupling of 32mm dia brass CP for glazed ware sink basins, etyc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repair SS soap dish of size 100mm complete all as specified and directed by Engineer-in-Charge.
S&F in repairs plastic water closet white seat cover to pedestal pattern pan with chromium plated hinges complete all as specified and directed.
S&F in repair PVC water connection 600 mm long to wash basin of 15mm dia including CP nuts and washers complete all as specified and directed by Engineer-in-Charge.
Taking dawn CI pipe 100mm/75mm of any description complete all as specified and directed by Engineer-in-Charge.
S&F for CI waste and vent pipes in any length with or without ears, fixed to wall dia of pipe 100mm omplete all as specified and directed by Engineer-in-Charge.
All as per item No 61 here in before but 75mm dia in floor.
S&F in repair for bends of any type radius diminishing pices or tapes (large bore measured) of 75mm dia bore.
All as per item No 63 here in before but 100 mm dia.
S&F in repair for branch pieces single (equal and unequal) ordinary or incerted (spigot or socket type) or with parallel branch of 75mm dia.
S&F in repair stainless steel sink 1.00mm thick for kitchen or laboratory, with plug, wast pipe, washers, including cantilever cast iron brackets, connecting union etc, overall size 495mmx420mm with bowl size 410mm x 330mm x 160mm including waste coupling, waste pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.
S&F in repair 28 mm dia aluminium powder coated drapery rod including socket and bracket complete all as specified and directed.
Taking down chowkhats or frames with shutters( with out taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters( with out taking off shutters from the frame) exc 1.5 sqm but n.exc 4.00 sqm each complete all as specified and directed.
Taking down shutter only of any description exc 1 Sqm n. exc 2 Sqm and removing complete all as specified and directed.
M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, kiln seasoned and chemically pressed treated and complete all as specified and directed by Engineer- in -Charge.
M&L preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified.
S&F Solid PVC door framed size 50mm x 47mm made out of 5mm plain colour square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (Style)) consisting of frame made out of MS Tubes for top and bottom rail, MS frame shall covered with heat moulded PVC ‘C’ channel having a PVC sheet striped 20mm width strode inside with solvent cement rail and bottom rail on either side and as gap insert for top rail and bottom rail panting of predawn colored PVC sheets to be fitted in the MS frame welded/secured to the stiles and rails feathered at edges with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at the site as per specification complete all as specified and directed.
All as per item no. 75 above (SSR 2020 SI-08080) but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.
S&F in repair aluminum alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300mm complete all as specified and directed.
S & F in repair 100 mm butt hinges, medium weight stainless steel ISI marked complete all as specified and directed.
S & F in repair aluminium anodised handle fabricated type of size 150mm complete all as specified and directed.
S & F in repair aluminium anodised barrel tower bolt of extruded section of size 150mm complete all as specified and directed.
S & F in repair sheet glass(Plain/Frosted) 3 mm thick ordinary quality fixed withwooden beadings/ oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.
S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aparture 1.4 mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50mm , bottom size 92x31.75x1.50mm and shutter top & bottom of size 40x18x1.55mm and sides (handle) of size 40x18x1.55mm and lock side shutter frame of size 40x18x1.45mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and directed by Engr-in-charge.
Supply and fix Aluminium ventilator powder coated (requried colour to match window colour), louvers type, frame top & bottom of size 31x42x1.60mm rectangular tub of size 40x20x2mm and middle vertical of size 42x46.20x1.60mm and clip for fixing wire mesh and glass of size 19x17.30x0.90mm thick including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 5mm thick glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc complete all as specified and directed by Engineer-in-Charge.
S&F aluminium powder coated (requried colour to match window colour) grill of 5.00 mm dia squares rectangular triangular circular shape aperture n.exc 5.00cm in length or width fixed with H or F channel complete all as specified and directed by Engr-in-charge.
S&F in repair aluminium powder coated (requried colour to match window colour) grill of 5.00 mm dia squares rectangular triangular circular shape aperture n.exc 5.00cm in length or width fixed with H or F channel complete all as specified and directed by Engr-in-charge.
M & L for Aluminium doors, powder coated (of approved colour), with frame of section 100 x 44mm x 2.5mm thick and shutter with bottom rail of section 150 x 44.5 x 2.5mm thick, middle rail of section 85 x 44.5 x 2.5mm thick and top rail of section 80.4 x 44.5 x 2.5mm thick and styles of section 80.4 x 44.5 x 2.5mm thick with 5mm thick glass (plain/tinted/with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150mm wide and 2.5mm thick including 150mm aluminium tower bolt, brass mortice lock complete all as per Drawing No. CEAA/TD/63 sheet No. 2.2 complete all as specified and directed.
S&F in repair PVC cabinet with mirror of size 450mmx600mm all as specified and directed by Engineer-in-Charge.
M & L for water proofing treatment in WC & bathrooms by applying cement slurry mixed with water proofing chemicals as per manufacturer's specifications of approved make as under:- (a) All corners of WC, bath shall be rounded by providing fillet of dia 75mm. (b) 15mm thick rendering on floor in CM 1:3. (c) Applying cement slurry @ 0.488 kg/sqm. (d) 200 micron thick polethene film of approved make with approved adhesive. (e) Including demolition of lean concrete in sunken floor and refilling of lean concrete 1:5:10.
Dismantling water tanks and exc 250 but n exc 500 litre capacity complete all as specified and directed.
S&F rotational moulded water storage tank 500 ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
S&F 15 mm Ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed .
Dismantling water tanks and exc 500 but n exc 1000 litre capacity.
S&F rotational moulded water storage tank 750 ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm bore Ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed
S&F in repair 15 mm Ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed .
S&F in repair 20 mm Ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F in repair PVC cover for overhead tank thread/hinged type with suitable locking arrangement suitable upto 1000 Ltr capacity complete all as specified and directed
S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed
M&L for framed work as in door frames or gates chowkats of angle or other section with braces, etc., complete, drilled or welded for ms hinges for fixing of gate or doors other covering and also fastening and fixing complete all as specified and directed.
Supply & fixed in repair CP peg set of four as per sample kept in GE’s office.
S & F in repair CP center hole wash basin mixer cast copper alloy suitable for iron pipe 15mm bore make L&K code 0427-A or equivalent approved as approved by GE.
S & F in repair, two way angle valve cock chromium plated fancy type bore 15mm. Make L & K code No 0327 or equivalent approved as approved by GE.
Supply and fixing in repair sheet glass shelf assembly consisting of 5.0 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Supply and fixing in repair toilet paper holder chromium plated as per sample kept in GE’s office complete all as specified and directed.
S&F in repair 150mm long Floor door stopper of alunium body and tongue, with hard drawn steel spring, fixed to bottom of door shutter complete all as specified and directed.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid and bedded on pointed on any mortar complete all as specified and directed.
M&L for green marble slab 15-18 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Marble slab including moulding,cutting and polishing and nosing and polishing of the free or front edge of the slab window cills etc and including 15mm thick backing coat in CM 1:4 all as specified and directed in Engineer -in -Charge.
Taking out existing unserviceable plaster, loose unsound weaken cement concrete of any description and in any position from existing surface of RCC roof slab/ RCC facia/ beams/ columns/ RCC chajja, average depth 25mm (approximate 6.5 mtrs height from natural GL) with power driven pneumatic chiesel and removal of debries upto a distence 500 mtrs out side MD land including saw cutting of all edges, making square shoulders of cavaties and roughening of smooth surface, scraping out and removing corrosion and all loose scales, rust etc. from the visible reinforcement and cleaning the steel reinforecement properly providing NIT zink primer to form a contineous film and preparing the surface to receive concrete of epoxy grouting mortar etc. including providing necessary scaffolding complete all as specified and as directed.
M&L for applying bonding coat of modified styrene butadene emulsion in proportion 1 part (bonding agent) : 1 part (water) : 3 part (OP cement) by volume with the brushes etc. to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with oldsurface including removal of loose/ distengrated old concrete/ plaster including preparation of surface etc. complete all as specified and as directed.
M&L for applying 10-12mm average thickness plaster on ceiling slab and chajja projections, facia and beams with polymer modified mortar firtified with SBR in proportion 1 part (cement) : 3 part (sand) by weight of cement with 11 to 15 ltrs water addition, finishing surface to match with existing adjoining surface complete all as specified and as directed.
S&F in repair 15 mm bore in dia Self-closing taps, cast copper alloy, chromium plated, screwed for iron pipe and fixed complete all as specified and directed.
M&L for complete removal of existing treatment of old surface incl brooming down /steel wire brushing ,scraping down smoke soot, moulded moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall complete all as specified and directed
M&L for applying 2 coat of weather proof exterior emulsion paint (apex) in camouflage pattern by diluting of water (as per manufacturer direction ) a gap of 24 hrs should be given between two coats , over a coat of primer on plastered /unplastered surface should be allowed to cure completely such as surafce applying one coat of exterior wall primer by thining a liter of primer with one liter of water allow the primer coat for four hours including cleaning and ensure that the surfaces to be painted is free from any loose paint and filling the surface imperfection such as holes , dirt, fine cracks are to be filled with cement and fine sand (in ratio 1:3) complete all as specified and as directed by Engr-in-charge.
M&L for granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
TECH SERVE SOLUTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .