Design, Supply, Testing and Commissioning of Multi stage Centrifugal Pump coupled with squirrel cage Induction motor alongwith allied accessories and Rising main for Lift Irrigation Scheme Biryani Karkit Kargil

Amount

Control panel with one Incomer and two out goings for two pump sets in parallel Operation. ( One running and the other standby and vice versa) STAR-DELTA starter for each pump set. Design, fabrication, assembling, wiring, Installation testing and commissioning fixed type, floor mounted, cubical design motor control panel fabricated out of 2mm/14 SWG CRCA thick sheet duly painted, suitable for indoor use, internally wired complete with bus bar covered with PVC heat shrinkable sleeves, colour coded. Panel shall be fitted with 02 Nos. STAR-DELTA motor starters suitable for 3- phase, 415 Volts, 50 Hz Squirrel Cage Induction Motors, with all components of suitable rating fixed and wired in the panel. The panel shall be complete with all protections in-built (Over load/PTC/Line fault / Voltage imbalance / Phase reversal / Under voltage / Over voltage / Over temperature / Open Gate / Excessive Starts per Hr, Single phasing), Main incoming MDO ACB with short circuit release including earth fault and under voltage protection. Bus bar, metering ( incoming and outgoing Voltmeter, Ampere meter, Frequency meter) (3-phase current/3-phase voltage/power factor of running motor, phase indication lamp (RYB with CTs), outgoing MCCB for each pump sets, capacitor Bank for an improved power factor of .95 to 1, over load relays. The control panel shall be complete with 3.5Core Cu cable, or required rating and length(control panel to motors) confirming to IS 694 with required thimbles. Job also includes P/f of service cable, 200 RM (Lt transformer to Servo Stabilizer), armoured. Single Core Aluminium Cable, of 2Rx185 Sqmm with required thimbles. The 3-phase squirrel cage induction Motors ratings are as fallows. i) rating=220 HP (Aprox) ii) Voltage 415± 10% iii) Frequency=50HZ

Maintenance free earthling:- S.I.T.C. of ALLTEC make long life maintenance free electrolytic earthling system with 10 feet vertical k type copper not less then 2”(50.8mm)ID and not less than 0.08”(2.03mm) wall thickness ,which does not require manual addition of water .The system should be corrosion resistant pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. Rated for high fault currents bas bar rated for 10KA, fault current bus bar connection type as “Terraweld” to with hold temperature of 7000C.The earthling port shall be designed and supplied with poly plastic port cover non conductive, environment friendly and lockable.

SUPPLY AND FIXING OF RAISNG MAIN Design supply installation testing and commissioning of ISI marked HDPE pipe (flanged) as per IS 4984:2016 to correct alignment and gradients, cutting , jointing with all fittings, ISI marked couplings, tees, bends reducers, etc including earthwork An ISO 9001:2016 Certified Manufacturer Conforming to IS

DN 200 mm, 8”, PN 20, PE-100, SDR-7.4

DN 200mm, 8”, PN 16, PE-100, SDR-9

Supply of 200MM Non Return valve, PN25, Conforming to BS 5153 (EN 12334) / IS 5312 Part 1 & 2, BS 5160/DIN 2401 and latest

Supply of 200MM Non Return valve, PN16, Conforming to BS 5153 (EN 12334) / IS 5312 Part 1 & 2, BS 5160/DIN 2401 and latest

Anchor Blocks

Construction of PCC Saddle block using (1:2:4)mix (As per Annexure E) @20 feet c/c. Job includes cost of material, labour, shuttering, tools and tackles etc. The job also includes fixing of 02 Nos. 6mm ms strip with suitable anchor bolts & nuts to fasten the Pipe on the anchor block. Block size = 2’8”x2’8”x4’ = 0.808Cum For 85 blocks = 0.808x140 = 68.68 cum

Construction of RCC Anchor block (As per Annexure E) using (1:2:4) mix. Job includes cost of materials, including straightening, bending, cutting and placing position, binding all reinforcement, earth excavation, centring shuttering and removal of farm work, carriage charges complete to be constructed as per site requirement Total Quantity = 10 blocks Total Quantity = 10 blocks

Foundation Block: Construction of RCC foundation block each pump-set (as per OEM guidelines) and PCC foundation control panel using (1:2:4) mix . Job includes cost of material, labour, shuttering, tools and tackles etc complete. Block size: The length and breadth of the foundation 300mm more from the respective length and breadth of the respective equipments. The height of the foundation block shall be 400mm i.e 200 mm below and 200mm above ground level fully embedded with ground flooring.

Gantry Crane: Supply installation testing and commissioning of portable gantry crane mounted on wheels for indoor use for lifting and lowering of pumps of following specifications: 1. Capacity : 02 ton 2. Type: Single Girder (of ISMB Girder of recommended size) 3. Max Height: Up-to 12 Ft. 4. Span: 6 feet (Aprox)

HDPE Jointing machine (200mm) Supply of Automatic/semi-automatic hydraulic operated butt fusion jointing machine of reputed brand. Operating voltage = 220v Power = 4kW (Aprox) Heating plate max temperature= 2700 deg cel.

Complete Pump Tool Kit Crimping Tool Hydraulic Type = 1 No Spanner double ended set = 1 set Ring spanner set = 1 set Screw driver = 1 set Socket = 1 set Grease Gun Bucket type = 1 No

M/S MUNTAZIR ENTERPRISES

AMAN AND CO

R.G. Industries