CWE KOTA/PLN-21 OF 2020-21 SPECIAL REPAIR TO SOLAR POWER LIGHT UNDER AGE (I) PILANI

Amount

Taking down 24W/48W LED Solar Street Light fittings with arm brackets from poles at any height including disconnect all connection and accessories like plates, plates frame. Batteries, battery encloser complete all as specified and directed.

S & F of LED Solar Street Light, 60W with driver inbuild charger with controller, auto sensor etc for weather proof and IP-66 protection complete all as specified and directed.

S & F of LED Solar Street Light, 40W with driver inbuild charger with controller, auto sensor etc for weather proof and IP-66 protection complete all as specified and directed.

S & F in repair Solar PV Module 150 Watt with SS PV module frame of sutiable size and all accessories, complete all as specified and directed.

S & F MS Arms bracket for mounting one in Nos street light fitting including clamps, nut bolts and washer to brace the same properly with duly painted in synthetic enamel paint of two coat in silver colour, complete all as specified and directed.

M & L for scraping old paint from street light poles 07/09 mtr long by wire brush inclduing street light arm bracket and applying two coat of aluminium paint and marking pole No. with black synthetic enamelled paint on yellow back ground in ovel/ circle shape on suitable height of pole etc., complete all as specified and directed.

S & F in repair 12V 150 Ah Lithium lon Solar UPS Battery with initial charging and connect with solar light and charger including SS battery enclosure with lock and key and all accessories, complete all as specified and directed. Make:- EXIDE/HBL/SU-KAM/AMARON/LUMINUOS

S & F hot dip galvanized anti corroded weather proof octagonal electric poles 7 mtrs long top mounting with 1500mm long arm bracket including base plate and 4 Nos foundation bolt with each bolt having 3 Nos nuts and 1 Nos washers including taking out existing damaged pole complete all as specified and directed. Make:- Cat Part No. BOP-7030 of Bajaj or equivalent in Surya/Crompton. Note:- (i) Arm bracket, base plate, foundation bolts, nuts and washer shall be deemed in quoted rate. (ii) Base plate and foundation bolts of electric pole shall be grouted at the time of RCC foundation. (iii) RCC foundatio size 1400x450x450mm shall be paid separately under respective items of BOQ.

S & F hot dip galvanized anti corroded weather proof octagonal electric poles 9 mtrs long top mounting with 1500mm long arm bracket including base plate and 4 Nos foundation bolt with each bolt having 3 Nos nuts and 1 Nos washers including taking out existing damaged pole complete all as specified and directed. Make:- Cat Part No. BOP-9030 of Bajaj or equivalent in Surya/Crompton. Note:- (i) Arm bracket, base plate, foundation bolts, nuts and washer shall be deemed in quoted rate. (ii) Base plate and foundation bolts of electric pole shall be grouted at the time of RCC foundation. (iii) RCC foundatio size 1700x450x450mm shall be paid separately under respective items of BOQ.

S & F in replacement 4.0 sqmm twin core flexible FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor, complete all as specified and directed.

Excavation in trenches, n. exc. 1.5 wide and n exc. 1.5 m in depth for foundation etc or for shaft, wells, cesspits, manholes, piper holes etc. n exc 10 sqm on plan and n exc. 1.5 in soft loose soil, complete all as specified and directed.

Excavation in trenches, n. exc. 1.5 wide and n exc. 1.5 m in depth for foundation etc or for shaft, wells, cesspits, manholes, piper holes etc. n exc 10 sqm on plan and for each additional 1.5m or part thereof in depth beyond the first 1.5m in soft loose soil, complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point, complete all as specified and directed.

M & L for reinforced cement concrete, M-20 grade (Nominal Mix) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M & L for TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M/S GAURI CONSTRUCTION

S.R.Enterprises