CONSTRUCTION OF ADDITIONAL M.S FABRICATION STAIRCASE FOR EMERGENCY ENTRY OR EXIT IN HEALTH CENTER, READING ROOM AND WARD OFFICE AT TPS NO.24(MOTAVARACHHA-UTRAN),TPS NO.73(UTRAN) AND TPS NO.27(UTRAN-KOSAD) IN NEW EAST (SARTHANA)ZONE, SURAT.

NAME OF WORK: CONSTRUCTION OF ADDITIONAL M.S FABRICATION STAIRCASE FOR EMERGENCY

ENTRY/EXIT IN HEALTH CENTER, READING ROOM & WARD OFFICE AT TPS No.24(MOTAVARACHHA-

UTRAN),TPS No.73(UTRAN) & TPS NO.27(UTRAN-KOSAD) IN NEW EAST (SARTHANA)ZONE, SURAT.

Description (WITHOUT G.S.T.)

Qty. Rate Unit Amount

PART A:- DEMOLITION & DISMANTLING

Demolition including stacking of serviceable materials and

1 disposal of unserviceable materials with all lead and lift (i) 11.00 1110.75 C.M.

Demolition of brick work and stone masonary including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift (ii) in cement

Dismantalling tiled or stone floors laid in mortar including

3 stacking of serviceable material and disposal of unserviceable 6.00 50.11 S.M.

material with all lead and lift

Removing the scraping of old deteriosted plaster of any

thickness from wall/R.C.C. member including strcking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift.

Dismantling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves, hold fasts

5 and other attachment etc. complete and stacking them within 9.00 197.09 Each

all lead and lift (ii) Not exceeding 3 Sq.M in area

Dismantling steel work including distempering and stacking

the materials with all lead and lift

Paver block flooring

Disposal of Building Rubbish

PART B:- BUILDING WORKS

WORK UPTO PLINTH

Excavation for foundation includ.sorting out & stacking of

useful materials & disposing of the excavated stuff upto

mt. Lead & all lift, watering etc. Comp. (A) Loose or Soft soil-

With Manual Labour

(1) Up to 1.5 Mt. depth 30.00 212.52 C.M.

Providing & laying C.C 1:3:6 (1 cement : 3 coarse sand :6

11 crushed stone agg. 20 m.m Nominal size)& curing comp. incl. 8.00 3095.25 C.M.

cost of from work in:

Description (WITHOUT G.S.T.)

Qty. Rate Unit Amount

Providing & laying cement concrete 1:1.5:3 (1 cement :

sand :3 graded stone agg. 20 mm nominal size) & curing

comp. Includ.cost of form work but exclu. Cost of

reinforcement for reinforced concrete work in : (A)

Foundation, footing, Base of columns and Mass concrete.

Providing & fixing TMT/ CRS Bar reinforcement for R.C.C.

13 work incl. bending, binding & placing in position etc. comp. 480.00 77.29 Kg.

Filling in trenches with available excavated earth in layer

14 not exceeding 20cm in depth consolidating each deposited 7.00 136.92 C.M.

layer by ramming & watering

Providing & Applying 20mm.Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of

15 mm av. Th. Backing coat of C.M. 1:3 (1 cement : 3 sand) &

mm. th. Finishing coat of C.M. 1:1 (1 cement : 1 sand)

up to plinth level 54.00 324.00 S.M.

WORK ABOVE PLINTH

Providing & construction brick work using Fly Ash bricks

having crushing strength not less than 35 Kg./sq.cm. in

superstructure in C.M. 1:6 (1 cement : 6 sand ) etc. comp.

Ground Floor 1.00 4729.83 C.M.

First Floor 1.00 5018.55 C.M.

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement :

6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

17 sand) laid over and jointed with grey cement slurry mixed 2.00 1019.39 S.M.

with pigment to match the shade of slab including rubbing

and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm

thick in risers of steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1- Cement : 3 coarse

18 sand) and jointed with gray cement slury mixed with 1.00 1076.94 S.M.

pigment to match the shade of slab including rubbing and

polishing etc. complete.

Providing & laying granite slab 18mm thick in Window-Door

seal Frame Etc laid on 10mm thick cement mortar 1:4 (1

Cement : 4 Coarse sand) with nessary adhesive material and

finished with flush pointing in white or colour cement,

including rubbing & polishing comp.. (Basic Rate:

20 Labour Charges For Edge Finished For Granite 172.00 43.43 R.M.

Description (WITHOUT G.S.T.)

Qty. Rate Unit Amount

Providing & fixing 35mm.th. Flush Door Solid Double Core

type Both Face water proof Ply Vennered & 1.5 mm

th.laminate shall be pasted on both side with adhesives as

specified by the manufacturers. The laminate shall be as per

approved shade & texture, of make incl. Sal wood frames of

finished size 12cm x 7cm.incl. S.S. Hinges with

nessary screws & Anodized aluminum fixtures &

fastenings For all Floor

Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats at

required spacing & frame around square or round bars with

round headed bolts & round headed bolts and nuts or by

screws incl. Priming coat of Red lead paint etc. comp. (A)

Plain grill For all Floors

Providing & fixing in position collapsible steel shutters with

vertical channels 20 x10 x 2 mm. Braced with flat iron

diagonals 20 x5mm size with top & bottom rails of T-iron

40x40x6mm. with 38mm dia. steel pulleys comp. with bolts,

locking arrangements, stoppers, handles incl. applying a

priming coat of Redlead paint etc. comp.

Steel work welded in built up sections, framed work

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint

24 (A) in beams & joists channels angles, tees, flats with

connection plates or angle cleats as in main & cross beams,hip

& trussed purlins connected to common raffers & the like.

Providing and Fixing Hollow steel Sections Framed Work

including Cutting, Hoisting, Welding & Fixing in position

Purlin, Main Chord etc. as per Engineer- in-charge.TATA /

JINDAL / ASIAN Make

Providing and laying and casting of 12 mm dia anchor

26 fastners for bolt 5.8 grade carbon steel, zinc plated M12x160 218.00 366.00 Nos.

Etc complete as directed by engineer-in-charge.

Providing & fixing colouron galvaniced steel, zinc /

aluminium allus coated sheet 0.5 mm. thick roofing fixed

with gslvanised grom J or L hook bolts and bolt 8mm dia with

bituman and impet washer filled with white lead etc.

Excluding the cost of purlins rafter and trusses.(TATA or

Applying Priming coat over new steel and other metal

surface after over and including preparing the surface by

throughly cleaning oil, grease dirt and other foreign matter

and scoured with brushed fine steel wool, scrapers and sand

paper with ready mixed priming paint brushing red lead.

Description (WITHOUT G.S.T.)

Qty. Rate Unit Amount

Providing & applying painting two coats at all floor levels on

new steel other metal surface with Epoxy paint, brushing

interior to give an even shade incl. cleaning the surface of all

dirt, dust & other foreign matter etc. comp. (A) For All type of

steel Structure for all floor .

Providing and supplying Medium duty injection adhesive

HY200 R for Rebar fixing in Dry conditions for dia upto

32mm. Drilling hole to the required depth by rotary hammer

drill, cleaning with brush and jet of clean air, filling resin and

hardener with standard dispenser in hole and then fixing the

re-bar, The system should be made of two foils consisting of

resin and Hardener foil pack.The installation and the setting

instructions should be strictly followed as per the

manufacturers Recommendations. Reinforcements will be

paid separately. (Pull out testing upto 1% of total rebar is to

be produced by manufacturer).

(A) 8 mm dia 72.00 80.00 Nos.

(B) 10 mm dia 72.00 90.00 Nos.

TOTAL AMOUNT :-

TOTAL AMOUNT :-

EXECUTIVE ENGINEER

NEW EAST (SARTHANA) ZONE

SURAT MUNICIPAL CORPORATION